Repairs of Submersible Pump sets, Hand pumps installed in Municipal Corporation Area.

Amount

Labour charges for removing and dismantling of Submersible pump set - 1.5 To 5 HP

Rewinding of submersible pump motor in Bore well of all types and makes up to and including with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed repairs, lubricating of ball bearings & bush bearing, and replacing screws etc above 1 H.P. up to 5 H.P with coated copper wires & overhauling with minor testing for the original speed, H.P. and no load & guarantee of one year.

Rewinding of submersible pump motor in Bore well of all types and makes up to and including 5 HP with coated copper wires & overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed repairs, lubricating of ball bearings & bush bearing, and replacing screws etc above 5 H.P. up to 25 H.P with coated copper wires & overhauling with minor testing for the original speed, H.P. and no load consumption & guarantee of one year.

Repairs overhauling of any kind of submersible pump set 100 mm dia. Including sundry material with following material if required proving and fixing spare parts with labor charges and giving satisfactorily testing on load etc.

submersible motor rotor silver brazing turning with shaft alignment etc complete.

Providing & fixing M seal to rotor & turning.

Providing & fixing sleeve to 100 mm submersible pump rotor.

submersible motor brass bush upper & lower providing & fixing leded brass etc complete.

proving and fixing submersible motor thrust bearing set

proving and fixing submersible motor thrust bearing laded brass fiber plate

proving and fixing submersible motor upper thrust bearing stainless steel plate

Pump & Motor coupled bushatinless steel

Upper lower flange stud ring

rotor shaft sleeve stainless steel

oil seal Motor

side clip cock

Galvnized for Upper Lower falange

Motor base

stage cashin newril

Newril impeller KQN Type

Pump Uper Lower Bush

Suction strainer cast iron

Suction strainer cast iron gril

Stage cashing impeller guide van newril

Pump shaft stailess steel 1 To 20 Stages

Pump shaft stailess steel 1 To 30 Stages

Motor base / thurst atinless steel boll replacing

Repairs overhauling of any kind of submersible pump set 150 mm dia. Including sundry material with following material if required proving and fixing spare parts with labor charges and giving satisfactorily testing on load etc.

submersible motor rotor silver brazing turning with shaft alignment etc complete.

Providing & fixing M seal to rotor & turning.

Providing & fixing sleeve to 150 mm submersible Motor rotor.

submersible motor brass bush upper & lower providing & fixing leded brass etc complete.

proving and fixing submersible motor thrust bearing set

proving and fixing submersible motor thrust bearing laded brass fiber plate

proving and fixing submersible motor upper thrust bearing stainless steel plate

Pump & Motor coupled bush stainless steel

Upper lower flange stud ring

rotor shaft sleeve stainless steel

Pump SS sleeve sleave stainless steel

oil seal Motor

side clip cock

Galvnized for Upper Lower flange

SS implier 150 mm providing & fixing

Pump Uper Lower Bush

Suction strainer cast iron

Pump shaft stailess steel 1 To 8 Stages

Pump shaft stailess steel 1 To 12 Stages

Pump shaft stailess steel 1 To 16 Stages

Pump shaft stailess steel 1 To 20 Stages

Motor base / thurstbearing srtainless steel boll replacing

Motor base

150 mm dia submersible pump set impeller both side brazing and turning

cast iron stage cashing

Impellett K Type series

Impellett N Type series

Impellett Q Type series

Guide vane PP Nylon/ Newril KQN type

Guide vane gunmetal K/N/Q type

Dischrge out Let gunmetal

Pump locking luping stud For 1To 30 stages pump

Non return valve

Labour charges for Assembling & Re erection of Submersible pump set - 1.5 To 5 HP

Rewinding of electric motor above 1 HP up to 2 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load

Rewinding of electric motor above 2 HP up to 3 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load

Rewinding of electric motor above 3HP up to 5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load

Rewinding of electric motor above 5HP up to 7.5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load

Rewinding of electric motor above 7.5 HP up to 10 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load

Rewinding of electric motor above 10 HP up to 12.5 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load

Rewinding of electric motor above 12.5 HP up to 15 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load

Rewinding of electric motor above 15 HP up to 20 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load

Rewinding of electric motor above 20 HP up to 25 H.P. three phase up to 1400 RPM of all types and makes with copper wire, overhauling with minor repairs, lubricating of ball bearings & bush bearing, and replacing screws etc. testing for the original speed and no load

Erection of submersible pump set 100 MM dia/ 150 mm dia 2 to 5 HP

Erection of submersible pump set 150 mm dia 6 to 7.5 HP

Erection of submersible pump set 150 mm dia 8 to 10 HP

Erection of submersible pump set 150 mm dia 11 to 15 HP

Removing of Ijecto / Monoblock/coupled pump set 2 to 7.5 HP

Erection of Ijecto/ Monoblock /coupled pump set 2 to 7.5 HP

Removing of Hand pump (INDIA MAK 2)

Errection of Hand pump (INDIA MAK 2)

Removing of Hand pump (INDIA MAK 2) DIP WLL (EDHP)

Erection of Hand pump (INDIA MAK 2) DIP WLL (EDHP)

Providing fixing 32 amp kitkat

Providing fixing 16 amp kitkat

Providing fixing 16 amp load relay LTLK-1 61,9-14,13-21)

Supplying & replacing contactor for DOL motor starter up to 10 HP

Supplying & replacing contactor for Star Delta motor starter from 12.5 H.P. to 15 H.P.

Supplying and replacing No-Volt-Coil for motor having DOL starters from 7.5 H.P. to 10 H.P.

Ammeter(0 To 30 Amp), Volt etc (0 to 500 volt box with indicating lamp including labor charges

Bore cap providing and fixing pump

Providing and angle frame for panel board with wiring & labor charges

MS clamp Patti 32 & 80 mm Providing and fixing with labor charges.

Making threading to GI pipe of dia. 32 To 40 mm

Making threading to GI pipe of dia. 50 To 65 mm

Making threading to GI pipe of dia. 80 To 100 mm

40 MM dia Gi Bend B class Providing & fixing

50 MM dia Gi Bend B class Providing & fixing

32 MM dia Gi Bend B class Providing & fixing

40 MM dia Flange with Nut bot,rubber ring providing and fixing and labor charges.

50 MM dia Flange with Nut bot,rubber acing providing and fixing and labor charges.

40 MM dia Gi Yelbow B class Providing & fixing

50 MM dia Gi Yelbow B class Providing & fixing

Any company submersible motor stamping making striating suitable for rewinding

Any company submersible monoblock motor stamping striating suitable for rewinding

Providing & Fixing MT Panel board of suitable size

Providing & Fixing ply wood for Panel board of suitable size

Providing & laying sub flat copper cable ( Polycab/ Finolex size 1x3x2.5sq.mm

Providing & laying sub flat copper cable ( Polycab/ Finolex size 1x3x 4 sq.mm

Providing & laying aluminium cable of size 1x4 x4sq.mm

Providing & laying aluminium cable of size 1x4 x2sq.mm

Providing & laying GI Pipe B class 3 Mtr. with both side threading 50 MM dia.

Providing & laying 40 mm GI Pipe B class 3 Mtr. with both side threading with coupling 40 MM dia.

3)Providing & fixing cashing pipe 150/200 mm dia& 4.5 MM thickness.

Insulation tape

Cable jointing rubber patch

Scriew driver 4"

Scriew driver6"

Scriew driver 12"

Tester

Pliers cutter 6 "

Pliers cutter 12 "

Malti meter

DOL starter Suitable for 3 to 7.5 HP

Star delta starter LT / LK / 8 To 15 HP semi automatic

Star delta starter LT / LK / 12.5 toTo 25 HP fullyautometic

Control panel with all accessories suitable for up to 5 HP

Control panel with all accessories suitable for up to 7.5 HP to 15 HP

providing & fixing MS box for electric connection with ply wood/ nut bolt/ screw of size 0.750 X 0.45

Removing of jammed sub pump set from bore well

Removing of jammed sub pump set from bore well by making special arrangement cutter, required accessories.

Bore flashing

2) 5 HP 20 Stage bore testing

3) 7.5 HP 30 Stage bore testing

Extension of pipe in bore

Providing bare submersible pump set 100 mm dia 3 HP 20 STAGE

Providing bare submersible pump set 100 mm dia 5HP 20 STAGE

Providing bare submersible pump set5 HP 8 STAGE

Providing bare submersible pump set 7.5 HP up to 8 STAGE

Supply rate should be increased per stage with more than 8 stage add Rs.759/ stage

32mm dia. GI Pipe B class in 3 Mtr. With both side threading & coupling

Cylinder assembly

Upper valve Assembly

Lower valve Assembly

Handle Chain bearing

Head box

Link chain with coupler

Self locking vice jaw

32 mm Lifter 3 feet

18 mm Pipe wrench

Water chamber Mark -II

Increasing Height ( distance Piece)

2 " 12 MM dia Nut Bolt

32 mm dia GI Pipe coupling

12 MM Rod Coupling

Inca Packing cover

Threaded plate

40 MM PvC collum pipe both side thrade with socket 3 miter 20Kg/cmSq.

50 MM PvC collum pipe both side thrade with socket 3 meter 20Kg/cmSq.

40 mm uppper lower MS connecter

50 mm uppper lower MS connecter

starter 1 hp to 2 hp singal fase providing & fixing

transportation charges pump set and material with loading & unloading period

CHAITANYA ELECTRICAL WORKS

Maharashtra Enterprises Latur

deepak electricals

PATEL AND COMPANY

BALAJI ELECTRICAL AND ENGINEERING WORKS