CONSTRUCTION OF NEW PHC BUILDING AND STAFF QUARTERS AT NAROLI,DNH (2nd Call)

Amount

Excavation for foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead. (A, B & D) Any type of soil & soft rock One Numbert requiring blasting.

Excavation for foundation for depth from 1.5 m to 3.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead. (A, B & D) Any type of soil & soft rock One Numbert requiring blasting.

Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and stacking of useful materials and disposing off the excavated stuff upto 50 Meter lead. (D) Soft rock One Numbert required Blasting

M & L For Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface

Filling available excavated earth (soft soil) in trenches. plinth, sides of foundations etc. in layers One Numbert exceeding 20 cm. in depth consolidatin One Each disposited layer by ramming and watering.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete (upto 10 ton)

Providing and laying cement concrete 1:3:6 (1- Cement : 3- coarse sand : 6- hand broken stone aggregates 40 mm One NumbeOne Running Meterinal size) and curing complete excluding cost of foOne Running Meterwork in (A) Foundation and Plinth including cost of foOne Running Meterwork, compacting, finishing, curing etc complete for all level, all height/ depth as directed by engineer in charge.

Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of foOne Running Meterwork and excluding reinforcement for reinforced concrete work in (A) Foundations, footings, Base of columns and Mass concrete. (more than 10 ton) as per direction of the Engineer - in - charge.

Providing material and labour for laying in position Ready Mixed M-30 grade concrete for reinforced cement conctere Beams using cement content as per approved Design Mix without Fly Ash (Min cementitious level as per latest IS 456 shall be maintained) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all lead having continuous agitated mixer, as per mix design for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying; cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard One Setting of concrete, improve workability without imOne Pairing strength and durability; finishing, compacting, vibrating, curing etc including cost of FoOne Running Meter work but excluding the cost of reinforcement etc complete for all elements, all floors, any heights/depths, any lead and lift as directed by Engineer Incharge.

Providing material and labour for laying in position Ready Mixed M-25 grade concrete for reinforced cement conctere Slabs, using cement content as per approved Design Mix without Fly Ash (Min cementitious level as per latest IS 456 shall be maintained) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all lead having continuous agitated mixer, as per mix design for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying; cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard One Setting of concrete, improve workability without imOne Pairing strength and durability; finishing, compacting, vibrating, curing etc including cost of FoOne Running Meter work but excluding the cost of reinforcement etc complete for all elements, all floors, any heights/depths, any lead and lift as directed by Engineer Incharge.

Providing material and labour for laying in position Ready Mixed M-30 grade concrete for reinforced cement conctere Columns, Pillars posts, struts work, using cement content as per approved Design Mix without Fly Ash (Min cementitious level as per latest IS 456 shall be maintained) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all lead having continuous agitated mixer, as per mix design for reinforced cement concrete work including pumping of R.M.C. from transit mixer to site of laying; cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard One Setting of concrete, improve workability without imOne Pairing strength and durability; finishing, compacting, vibrating, curing etc including cost of FoOne Running Meter work but excluding the cost of reinforcement etc complete for all elements, all floors, any heights/depths, any lead and lift as directed by Engineer Incharge.

Providing material and labour for laying in position ready mixed cement concrete M.250 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of foOne Running Meterwork and excluding reinforcement for reinforced concrete work in (F) Chajja and lintel (upto 10 ton) as per direction of the Engineer - in - charge.

Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of foOne Running Meterwork and excluding reinforcement for reinforced concrete work in (G) Staircase excluding landing (upto 10 ton) as per direction of the Engineer - in - charge.

Providing material and labour for laying in position ready mixed cement concrete M.300 grade concrete manufactured in fully automatic batching plant and transported to the site of work in a transit mixer for a lead up to 10 kms having continuous agitated mixer and curing complete including the cost of foOne Running Meterwork and excluding reinforcement for reinforced concrete work in (H) RCC WALL upto floor two level (upto 10 ton)

Providing material and labour for TMT Bar FE 500/500D reinforcement for R.C.C. work including bending, binding and placing in position complete. (more than 10 ton)

Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, into a hole of dia 10mm and depth 150mm as per manufacturer/ structural consultant's specification and fixing rebar of the required diameter subsequently. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge.

Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, into a hole of dia 12mm and depth 180mm as per manufacturer/ structural consultant's specification and fixing rebar of the required diameter subsequently. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge.

Providing material and labour for Drilling/ Cleaning hole and injecting grouting chemical with the help of dispenser, into a hole of dia 16mm and depth 240mm as per manufacturer/ structural consultant's specification and fixing rebar of the required diameter subsequently. Fixing methodology shall be followed as per manufacturer’s guidelines. Steel will be paid under relevant item. Manufacture to submit Rebar Depth Calculation based on design loads & other parameters as provided by consultant and in accordance with EOTA-TR-023/029 “guidelines for post installed rebar connections” for approval. Rate shall be inclusive of all material, labour, necessary scaffolding etc complete for all floors, all height as directed by engineer in charge.

Brick work using common burnt clay building bricks having crushing strength One Numbert less than 35 One Kilo Gram./Sq.Cm. in foundation and plinth in Cement Mortar 1:5. (1- Cement : 5 -fine sand)(B) Conventional (upto 10 ton)

Providing material & labour for Masonary work using Aerated light weight concrete block having crushing strength One Numbert less than 35 One Kilo Gram/sqcm for super structure, for Ground Floor in cement mortar 1:5 ( 1 cement : 5 fine sand ) in any shape & thickness including finishing, racking of joints, scaffolding for all height all level etc complete as directed by Engineer-in- Charge.

Providing material & labour for Masonary work using Aerated light weight concrete block having crushing strength One Numbert less than 35 One Kilo Gram/sqcm for super structure, for First Floor in cement mortar 1:5 ( 1 cement : 5 fine sand ) in any shape & thickness including finishing, racking of joints, scaffolding for all height all level etc complete as directed by Engineer-in- Charge.

Providing material & labour for Masonary work using Aerated light weight concrete block having crushing strength One Numbert less than 35 One Kilo Gram/sqcm for super structure, for Second Floor/ Mumty in cement mortar 1:5 ( 1 cement : 5 fine sand ) in any shape & thickness including finishing, racking of joints, scaffolding for all height all level etc complete as directed by Engineer-in-Charge.

Half brick masonry in common brunt clay building bricks having crushing strength One Numbert less than 35 One Kilo Gram/Sq.Cm. in Cement mortar 1:4 (1- Cement : 4 -coarse sand ) in any shape & thickness including finishing, racking of joints, scaffolding for all height all level etc complete as directed by Engineer-in-Charge. (B) Conventional (upto 10 ton)

Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering Ground Floor finished even and smooth including curing etc. complete in C:M 1:6 (1 cement :6 fine sand) and finishing with floating coat of neat cement slurry

Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering First Floor finished even and smooth including curing etc. complete in C:M 1:6 (1 cement :6 fine sand) and finishing with floating coat of neat cement slurry

Providing material and labour for 12mm thick CEMENT PLASTER in Single Coat For plastering on Brick concrete wall surfaces for plastering Second Floor & Mumty finished even and smooth including curing etc. complete in C:M 1:6 (1 cement :6 fine sand) and finishing with floating coat of neat cement slurry

Providing and applying 12 mm thick (average) premixed foOne Running Meterulated one coat gypsum lightweight plaster having additives and light weight aggregates as veOne Running Metericulite/ perlite respectively confoOne Running Metering to IS: 2547 (Part - 1 & II) 1976, applied on hacked / uneven bacOne Kilo Gramround such as bare brick/ block/ RCC work on walls & ceiling at all floors and locations, finished in smooth line and level etc. complete

Applying Two coats of Birla (white cement based) or Asian (acrylic lapy putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Providing material and labour for 6mm thick CEMENT PLASTER in single Coat For plastering on ceiling and soffits of stairs, for Ground Floor finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry.

Providing material and labour for 6mm thick CEMENT PLASTER in single Coat For plastering on ceiling and soffits of stairs, for First Floor finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat cement slurry.

Providing material and labour for 6mm thick CEMENT PLASTER in single Coat For plastering on ceiling and soffits of stairs, for Second/ Mumty Floor finished even and smooth including curing etc. complete in C:M 1:3 (1 cement :3 fine sand) and finishing with floating coat of neat

20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1- cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1- sand) etc. complete.

Providing chicken wire mesh of size16mm x 24mm at junction of concrete and brick work or between different materials filled with rich cement mortar and @ 100mm on One Each side of surfaces including necessary "U" nails/ screws/ washers with cleats for fixing, overlaps, curing, scaffolding etc complete for all floors/ all levels/ all heights/ all shapes as per direction of Engineer-in-charge.

P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on existing flooring by adhesive material including dismentaling of existing flooring and jointed with cement slurry including finished with 3mm wide epoxy grouting & cleaning the surface etc. complete for light shade, For all floors/ all levels/ all heights as per direction of Engineer-in- charge.

P & L 24" x 24" vitrified 8 mm thick tile for dado over 10 mm (average) base of cement mortar 1:3 ( 1 cement: 3 coarse sand) on new surface and jointed with cement slurry including finised with 3mm wide epoxy grouting & cleaning the surface etc. complete for light shade & including flushing with wall above skirting, For all floors/ all levels/ all heights as per direction of Engineer-in-charge.

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment, 3mm wide epoxy grouting to match the shade of slab including rubbing and polishing etc. (A) 25mm thick complete, For all floors/ all levels/ all heights as per direction of Engineer-in-charge.

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab, 3mm wide epoxy grouting including rubbing and polishing etc. One Pointing & flushing with wall above skirting complete, For all floors/ all levels/ all heights as per direction of Engineer-in-charge.

Providing and laying Granite 20-22 mm thick flooring over 20mm (Average) thick base of cement mortar 1:6 (1-cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab, 3mm wide epoxy grouting including rubbing and polishing etc. complete, For all floors/ all levels/ all heights as per direction of Engineer-in-charge.

Providing and laying Granite 20-22 mm thick in risers of steps,skirting Dado, window sills and pillars laid on 10mm thick cement mortar 1:3 (1- Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab, 3mm wide epoxy grouting including rubbing and polishing etc. complete, For all floors/ all levels/ all heights as per direction of Engineer-in-charge.

Providing and laying Ceramic tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cment mortar 1:3 (1-cement : 3- coarse sand ) finishing with flush One Pointing in white cement, For all floors/ all levels/ all heights as per direction of Engineer-in-charge.

Providing and laying white glazed tiles 6mm thick in skrting risers of steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-coarse sand) and jointed with white cement slurry, For all floors/ all levels/ all heights as per direction of Engineer-in-charge.

Two coats of Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade, For all floors/ all levels/ all heights as per direction of Engineer-in-charge.

Two coats of Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade, For Ceilings, For all floors/ all levels/ all heights as per direction of Engineer-in-charge.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives New work (Two or more coats applied @ 1.43 litre/ 10 One Square Meter. Over and including priming coat of exterior primer applied @ 0.90 litre/10 One Square Meter. For all floors/ all levels/ all heights as per direction of Engineer-in- charge.

Providing and fixing M.S. round or square bars with M.S.flats at required spacing in wooden frames/ wall over windows.

Providing material and labour for fixing in position frames for any type of aluminium work for any type of door, window, partition, fixed louvers, made out of any type of aluminium sections of approved make having minimum 50 micron pure polyester powder coating of approved shade, texture & colour of approved make for all floors/ all levels/ all heights/ all shapes/ all sizes including cutting, bending, crimping, fabricating in best workmanship manner etc as per the drawing, specification and as directed by Architect or Engineer-in-Charge.

Providing material and labour for fixing in position Shutters for any type of aluminium work for any type of door, window, partition, fixed louvers, made out of any type of aluminium sections of approved make having minimum 50 micron pure polyester powder coating of approved shade, texture & colour of approved make for all floors/ all levels/ all heights/ all shapes/ all sizes including cutting, bending, crimping, fabricating in best workmanship manner etc as per the drawing, specification and as directed by Architect or Engineer-in-Charge.

One NumberTE for Aluminium Work for Doors/ Windows/ Ventilaotrs/ Fixed Glazing etc. Contractor shall prepare shop drawing based on concept drawing and get approved from the consultants before procurement of material. All loose material shall be approved. Mockup of one/two window shall be executed as per approved shop drawing with all hardware. Work shall carried out as per the approved shop drawings, approved mock-up and approved sample. Actual weight of installed Aluminium sections which are visible shall only be measured and shall be considered for the payment. Contractor shall provide guarantee for stability, water tightness etc for 12 months after defects liability period. Rate shall be inclusive of providing aluminium sections, cutting, fabrication, errection and fixing to the best workmanship manner, including 1) Sheet metal screws and casted solid aluminum corner cleats fixed with external byttins with a spring for rapid and secure joint assembly for casement and sliding shutter and frame; 2) Glazing clips for receiving infill panel; 3) Best quality wool pile where ever shutter touches the frame and compatible microwave cured EPDM rubber; 4) Dash Anchor fasteners of HILTI HRDUGT or equivalent for fixing the frame assembly to the RCC or masonry surfaces. Minimum 1 anchor fastener shall be used for every 600 mm length of section for stability of frame. 5) 10mm GI tie rod for connecting vertical stile at top and bottom for aluminum door shutter and 4mm thick solid aluminium corner cleat of full thickness of section for connecting style and horizontal rails; 6) providing and fixing packing at every 600mm c/c of average 6 mm compact sheet of width (equal to section width less 30mm for backer rod and sealant); 7) Filling the gap between wall and frame on both sides (outside and inside) with polyethylene baker rod of avg. 10 mm thickness of approved make and color and then sealing the remaining gap with neutral grade G/M (Glazed & Metal) weather silicon sealant of approved make and color. 8) TeOne Running Meterite treated seasoned teak wood as infill material to installe hardware in door shutter and frame as and when required but excluding. 1) necessary hardware; 2) Glazing or Infill material. Providing material and labour for fixing 6mm thick Clear Toughen Glass as in Doors, fixed glazings as per approved sample of any size, any shape and specified thickness in aluminium frame and shutter work with necessary cutting of glass as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ structural sealant and 3M tape on the periphery of the glass as per the required thickness etc. complete at all floors/ all levels/ all heights as per the directions of Engineer in charge. Actual installed quantity shall be measured and paid.

Providing material and labour for fixing 6mm thick Sheet Glass as in windows, glazings and similar work of any size, any shape, any color, any texture of approved make and as per approved sample. Sheet Glass shall be fixed in aluminium frame and shutter work with necessary cutting of sheet, single side, double side coloured as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ adhesive tape/ screwing on the periphery of the sheet as per the required thickness etc. complete at all floors/ all levels/ all heights as per the drawing & directed by Engineer in charge. Cut edges of the compact sheet shall be provided with masking tape. Actual installed quantity shall be measured and paid.

Providing material and labour for fixing in position SS 304 - 18 x 16 mesh and 32gauge Mosquito net of any size any shape having 50 micron pure polyster powder coating of approved make and shade for aluminium sliding shutter/ fixed shutter or in front of aluminium louvers as per approved shop drawing prepared by contractor. Jali shall be fixed with SS304 grade screws and fasteners required to tighten the Jali/ Net including fxing channel, EPDM quality rubber/ silicon sealant etc complete for all floors, all levels, all heights as directed by engineer in charge. Only installed area of mosquito net shall be measured and paid in One Square Meter without considering any westage. All aluminium sections shall be paid under relevant tender item.

Providing and fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacings and frame alround, square or round bars with round headed bolts and nuts or by screws (A) Plain Grill. (upto 10 ton)

Providing and fixing 35 mm thick shutters for Doors, windows and clerestory windows including Indian teak wood frames 10 cm x 7 cm. size including aOne Numberdized alluminium fixtures and fastenings including primer coat of approved quality and two coats of oil painting etc, complete. (ii) Fully Panelled.

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP shutter with wood grain raised panneled design finish shutter having extra reinforcement on sides & edges in Gel coat finish. The core of the shutter & frame is to be filed up with injected polyurethene foam done in situ alongwith embedded wooden pieces for stiffening & also taking hinges & fintures. The whole FRP frame & shutter is to be water proof weather proof, teOne Running Meterite proof & resistance to mild acid/alkali. Rates are to be inclusive of S.S hinges with fastener sleeve & alluminium fixtures & fastenings.

Providing material and labour for fixing SS-304 grade butt hinge of 100 x 75 x 3 mm - with ball bearing of approved make as per approved sample with necessary screws etc. complete for all floor all height all level as directed by Engineer in Charge.

Providing material and labour for fixing Mortise lock of approved make having 72mm centre to centre, 55mm BackOne Set 20mm Square forend and 60/ 70mm standard Europrofile Pin Cylinder with both side key /one side key - one side kOne Numberb operation and SS 304 grade hollow tubular pipe One Pair of Mortise handle of 22mm dia 150mm long with a One Pair of SS 304 Escutcheons (key hole plate) for wooden /aluminium/ metal doors with necessary ss phillips head screws etc complete for all floor, all height, all level as per approved sample as directed by engineern in charge. The lock shall be with 3 keys.

Providing material and labour for fixing Mortise shaft dead lock of approved make with key (Alen Key lock), sleeve with 57mm backOne Set and 25mm square forend in stainless steel satin finish etc complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Providing material and labour for fixing SS 304 grade push-pull One Pair of handle of size 200 mm long x 19mm dia made out of satin (brush) finish hollow pipe of 1.5mm thick having offOne Set type (C or D shape)/ H- shape/ D-shape of approved make with necessary screws etc. complete for wooden doors/ aluminium doors/ metal doors for all heights, all floors and all level as per approved sample and as directed by Engineer-in- charge. Rate shall be The length of handle should be perfect center to center as below specified.

Providing material and labour for fixing chromium plated brass/ SS 304 grade handles 150mm long D shape rod handle of approved make with both end bracket with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Providing material and labour for fixing of SS 304 brush finish 250mm height Tower bolt (barrel type with minimum rod size shall be 10mm) of approved make in wooden doors/ aluminium doors/ metal doors with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Providing material and labour for fixing 250mm long (minimum rod size shall be 14mm and 110mm hanging handle) "J" type SS 304 brush finish Aldrop (sliding bolt) of approved make with necessary screws, pins, bolts etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Providing material and labour for Fixing SS 304 satin finish 100mm long Baby Latch including Bracket of 35 mm x 38mm, minimum Weight 198 gOne Running Meter with necessary SS Screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Providing material and labour for fixing SS 304 brush finish solid Door Stopper with magnet, fixed type, wall mounted (square/ round) of approved make with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Providing material and labour for fixing SS 304 brush finish solid Door bufer with pvc base, wall mounted (square/ round) of approved make with necessary screws etc. complete as approved by Engineer-in-charge in Charge.

Providing material and labour for fixing powder coated inbuilt flush handle (without lock) of approved make of required capacity including all required accessories like nib, counter plate etc as per approved manufacturer recomendatation for aluminium sliding window with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Providing material and labour for fixing powder coated multi One Point lock with mortise handle of approved make of required capacity with heavy gear mechanism including all required accessories like nib, nib holder, counter plate, fork, pawl, polyamide strip, dummy handle etc as per approved manufacturer recomendatation for aluminium sliding doors and window with necessary screws etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Providing material and labour for fixing adjustable/ fixed Teflon roller bearing One Set with reinforced nylon casing of approved make (twin or single wheel according to weight and size) for sliding window/door as per drawing etc. complete for all floor, all height, all level as per approved sample and as directed by engineer in charge.

Providing and fixing in position S.S. hand rail in main stair case, landing, balconies etc. in 2"(50mm) dia S.S. pipe 1.5mm thk. 304 grade resting on1"( 25 mm) S.S. pipe 1.5mm thk. 304 grade size S.S.304 grade square bars 10mm, of clear height 1meter placed at 30 cm c/c including making necessary hold fast fixture (10 mm square bars 22 cm long) embedded in staircase concrete for resting the S.S 304 grade . vertical square bars with holding etc. as per approved design and as required for the work including bending hand rail pipe to proper shape in curves with specials etc. complete (Approved Makes -Tata/SAIL/Jindal/Essar/Bhushan Steel/Arecelor Mittal). Railing height is 1 M. as per approved by architect. COMPLETE EIC

Providing and fixing M.S. round or square bars in railings & stand posts with M.S.flats at required spacing in embedded/ fixed in below complete all as shown on drawing & directed by Engineer-in-Charge

Applying general insecticide pest control treatment to floors, cupboards, plinth, walls etc including labour materials etc. complete. Using Imidacloprid 30.5SC As per IS 6313 part-II ((0.075% concentration by mass) is recommended 10.5 ml chemical diluted with 5 One Litre of water application 0.5 litre chemical/One Square Meter of surface is recommended as per I.S.

M & L for Brickbat WPT, consisting of (a) slurry coat of neat cement using 2.75 One Kilo Gram/One Square Meter of cement admixed with water proofing compound (b) brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound confoOne Running Metering (c) second coat of cement slurry using 2.75 One Kilo Gram/ One Square Meter of cement admixed (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound confoOne Running Metering to IS : 2645

Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or slope and to be tempered to bring mortar creme out upto surface using white cement including rounding off junctions and extending them upto 15 cm along the wall, clearing with water and oxalic acid etc. as directed.

Providing material and labour for carrying out waterproofing treatment to sound concrete surface of toilets, sunken slabs, corridors, wet areas etc. after proper surface preparation to remove loose dust, dirt etc., reOne Pairing of cracks (if any) using polymer modified mortar, carry out cementitious injection grouting at leakage One Points modified with Plasticized Expandive Grout Admixture @ 225 gms per bag of cement, carry out 50 mm thick cement mortar (1:3) vattal corner modified with Styrene Butadine Polymer bonding agentat dosage of 2.5 Ltr per 50One Kilo Gram cement, Pre- dampening concrete surface, mixing and application of two coats of Elastomeric Polymer modified cementitious waterproofing coating by incorporating alkali resistance 45 gsm glass fibremesh between 1st and 2nd coat using suitable brush or roller as per coverage etc. complete for all floor al height all level as per manufacturer's specification and as directed by engineer in charge. Cured Polymer modified cementitious waterproofing coating shall comply with ASTM D4060, ASTM D4541, ASTM D638,ASTM C836 and possess below properties: Mixed density: 1.68 gloc, Adhesion to concrete-> 1N/mm2, One Numbern-toxic, Static crack accommodation-1mm Water proofing system shall be executed by only approved applicator of approved brand and under strictly supervision of technical fellow of manufacturer. The rate should includs 10 year guarantee for waterproofing.

HOLE PACKING Providing material and labour for applying total packing treatment on any type of pipes comes into water proofing area for all floor, all height as directed by engineer in charge as follows: Preparing the inside surface of core and Pipe by roughening using suitable Sand paper to get better adhesion prior to packing works. Cleaning the surface by wire brushing followed water jet to remove any laitance or loose flaky particles. Applying a coat of styrene-butadiene based polymer coating using Styrene Butadine Polymer bonding agentto enhance adhesion between the packing material and other surfaces. Packing the gap using One Numbern shrink cement polymer based grout using One Numbern- shrink cementitious grout upto the surface of the bore whilst the bonding agent is in tacky state before application of water proofing treatment. Treatment shall be executed by same agency with same manufacturer's product. Warranty includes in water proofing item.

Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm. Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have, light reflection 85% One Numbern-combustible as per B.S. 476 part IV, 100% humidity resistance and also having theOne Running Meteral conductivity0.043 w/m KC.for the best theOne Running Meteral insulation The Light weight calcium Silicate tile shall be of approved texture Fine fissured/Spintone /Cosmos having NRC value of 0.5 & Globe having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per som including both side) consisting of main Trunner suitably spaced at joints to get required length and size of 24X38mm mace from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross T of size 24X28mm made out of 0.33mm (Minimum; sheet spaced 1200mm along spaced between main Tat 600mm centre to centre to foOne Running Meter agrid of 1200X600mm and secondary cross of length 600mm and size 24x28mm made of 0.30 mm thick (Minimum) sheet to be interlocked at middle of the 1200X600mm panel to foOne Running Meter grid of size 600X600mm resting on perionery walls/partitions on a perimeter wat angle pre-coated steel of size (24X24X3000mm made of C.40mm thick (minimum) sheet with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall

Providing and fixing pre-cast Rubber Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed by mechanically pressed and as per approved design including 35mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete.

Providing and applying a coat of textured finished on column the rate shall be included scrapping, levelling and preparing the surface complete.

12 mm thick plain cement mortar Raised bands in cement mortar 1:4 (1 cement : 4 fine sand)

Providing cement vata (10cm. x 10 cm. size) quarter round in cement mortar 1:1 including neat cement finishing, watering etc. complete.

Providing and fixing wsh down water cloOne Set (European type, W.C. Pan) with integral P or S trap including jointing the trap with soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be measured and paid for separately)(A) vitreous China Pattern :(i) in white colour Model - CNS-WHT-551-PSPP of Jaquar or equivalent model in Cera, Hindware

Providing and fixing plastic seat and cover for wash down water closer with C.P. brass hinges and rubber buffers. (B) Black plastic seat and cover. Model - CNS-WHT-551-PSPP of Jaquar or equivalent model in Cera, Hindware

Providing and fixing health faucet Hand Shower (Health Faucet) with 1 Meter Long Easy Flex Tube in Chrome Finish and Wall Hook with N.R.V (Back Flow Preventer) Model - ALD-587 of Jaquar or equivalent model in Cera, Hindware

Providing and fixing water cloOne Set squatting Pan (Indian type W.C. Pan) size 580mm (Earthwork, bed concrete, foot reste and trap to be measured and paid for separately) (A) Vitreous China.(I) Long pattern = White colour Model - Starwhite - Hindware or equivalent model in Cera, Jaquar

Providing and fixing 12.5 One Litre low level flushing cistern with a One Pair, of C.I. or Mild brackets, complete with fittings such as lead valve less syphon, 15mm One NumbeOne Running Meter.nal size brass ball valve with polythene float, C.P brass handle unions and couplings for connections, with inlet, outlet and overflow pipes, 40mm dia. porcelain enamelled flush bend including cutting holes in walls and making good the same connecting the flush bend with cistern and cloOne Set (overflow pipe to be measured and paid for separately)(A) Vitreous China (I) In white colour Model - WHC-WHT-184NBTL of Jaquar or equivalent model in Cera, Hindware

Providing and fixing urinal of approved quality including connecting the urinal with waste pipe, tap etc complete (A) white earthenware flat back or corner type size 430mm x 260mm x 350mm Model - URS-WHT-13261 of Jaquar or equivalent model in Cera, Hindware

S & F, Wall Mixer with Provision for Overhead Shower with 115mm Long Bend Pipe On Upper Side, Connecting Legs & Wall Flanges Model - FUS-29273UPR of Jaquar or equivalent model in Cera, Hindware

Providing and fixing C.P. Overhead shower rose with 15mm or 20mm inlet.(A) 105mm dia. with 190mm long flat wall mounted shower aOne Running Meter Model - SHA - 483 (Shower AOne Running Meter) & OHS-1709 of Jaquar or equivalent model in Cera, Hindware

Providing and fixing washbasin with single hole for pillar tap with C.I. or M.S. brackets painted white including sutting holes and making good the same but excluding fittings. (A) Vitreous China: (ii) Flat Back washbasin 550 mm x v 400mm size. (i) In white colour Model - JDS-WHT-25901 of Jaquar or equivalent model in Cera, Hindware

Providing and fixing C.P. brass waste for washbasin or sink. (A) 32mm dia.

Providing and fixing M.I. fisher union for washbasin or sink. (A) 32mm dia.

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing C.P. brass towel rail comlete with C.P. brass brackets fixed to wooden plugs with C.P. brass scews. 600mm x 20mm size

Providing and fixing toilet paper holder.(A) C.P. Brass

Providing and fixing screw down bib taps of following size.(A) Brass screw down bib tap polished bright. (i) 15mm dia. Model QQT-7037 of Jaquar or equivalent model in Cera, Hindware

Providing and fixing pillar tap, capstan head, screw down high pressure with screws, shanks and back nuts. (i) 15mm dia. Model - FUS-29001 of Jaquar or equivalent model in Cera, Hindware

Providing and fixing chromium plated brass half turn flush cock of approved quality including fixing in pipe line etc. complete.(i) 15mm dia. Model - KUP-35053PM of Jaquar or equivalent model in Cera, Hindware

Providing and fixing of angular cock with wall flange of approved quality including fixing in pipe line etc. complete. Model - FUS-29053 of Jaquar or equivalent model in Cera, Hindware

Providing and fixing Gun metal check or One Numbern-return fullway wheel valve.(E) 40mm dia.

Providing and fixing chromium plated, bottle trap with necessary couplings of approved quality for wash basin. Model - ALD-769 L250x190 of Jaquar or equivalent model in Cera, Hindware

Providing and fixing G.I. Rain water spout of 50mm dia. and 30cm. length.

Providing and fixing concealed center One Point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. One NumbeOne Running Meterinal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete.[A] 20 mm. Make - Astral CPVC Pro, Prince, Supreme

Providing and fixing concealed center One Point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. One NumbeOne Running Meterinal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm. Make - Astral CPVC Pro, Prince, Supreme

Providing and fixing concealed center One Point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. One NumbeOne Running Meterinal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm. Make - Astral CPVC Pro, Prince, Supreme

Providing and fixing concealed center One Point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. One NumbeOne Running Meterinal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [E] 40mm. Make - Astral CPVC Pro, Prince, Supreme

Providing and fixing concealed center One Point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. One NumbeOne Running Meterinal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm.

Providing, laying and jointing in true line and level 75 diametre U.P.V.C (Type B) confoOne Running Metering to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings confoOne Running Metering to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with One Each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Make - Astral Aquaris, Prince, Supreme

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) confoOne Running Metering to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings confoOne Running Metering to ISI 14735- 1999 of approved make for drainage system pipe line, pipe shall be jointed with One Each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Make - Astral Aquaris, Prince, Supreme

Providing, laying and jointing in true line and level 160 diametre U.P.V.C (Type B) confoOne Running Metering to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings confoOne Running Metering to ISI 14735- 1999 of approved make for drainage system pipe line, pipe shall be jointed with One Each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Make - Astral Aquaris, Prince, Supreme

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm diameter with jali of the following One NumbeOne Running Meterinal diameter of self cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.

Providing and fixing Heavy class SS grating of grade SS 304 of approved make and quality, and as approved by the Engineer-in-charge, weighing One Numbert less than 150 gms. including One Setting in floor with white cement to match with floor finish as per requirement complete as per directions of Engineer-in-Charge. I) Standard Floor Drain 150x150mm. FD1116S - KICH

Providing and laying Cement concrete 1:5:10 (1-Cement : 5-Fine sand :10-Graded stone aggregate 40mm One NumbeOne Running Meterinal size) bedding for stoneware pipes of following internal diameters with necessary foOne Running Meterwork and curing complete.(B) 150mm dia. (166mm Ave. bed thickness)

Providing and fixing S.W. gully trap with C.I. grating brick masonry chamber and water tight C.I. cover with frame of 300mm x 300mm size (inside) with standard weight.(i) Square mouth traps. (A) 100mm x 100mm size P type. (upto 10 ton)

Providing laying (to level or slopes) and jointing reinforced concrete Light duty One Numbern-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(B) 150mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty One Numbern-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(C) 250mm

Providing laying (to level or slopes) and jointing reinforced concrete Light duty One Numbern-pressure pipes I.S. class NP2 of the following internal diameter with collars and butt ends prepared for collar joints including testing of joints complete.(D) 300mm

Providing and fixing in position cowl went to pipes.(C) 100mm dia

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank

Constructing brick masonry chamber for underground C.I. Inspection chamber and bends with bricks having croshing strength One Numbert less than 35One Kilo Gram. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm intenal dimensions total weight of cover with frame to be One Numbert less than 38One Kilo Gram. (Wt. of cover 23 One Kilo Gram.) and Wt. of frame 15One Kilo Gram. ) (R.C.C. top slabe with 1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete.(iii) Inside dimensions 600mm x mm and 450mm deep for pipe lines with three or more inlets. (upto 10 ton)

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2- coarse sand : 4-graded stone aggregate 20mm One NumbeOne Running Meterinal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm One NumbeOne Running Meterinal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 1.5M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be One Numbert less than 128 One Kilo Grams. (Wt. of cover 64 One Kilo Gram. and Wt. of frame 64 One Kilo Gram.)(A) With 230mm thick walls of brick msonry using brick having crushing strength One Numbert less than 35One Kilo Gram. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand)

Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2- coarse sand : 4-graded stone aggregate 20mm One NumbeOne Running Meterinal size) foundation concrete 1:3:6 mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering 15mm thick with Cement Mortar 1:5 (1-Cement : 5 coarse sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 mix (1-Cement :2-Coarse sand :4-stone aggregate 20mm One NumbeOne Running Meterinal size) finished smooth complete including curing and festing (i) Inside size 900mm x 1200mm and 2.25M. deep including C.I. cover with frame size 560mm diameter total weight of cover and frame to be One Numbert less than 128 One Kilo Grams. (Wt. of cover 64 One Kilo Gram. and Wt. of frame 64 One Kilo Gram.)(A) With 230mm thick walls of brick msonry using brick having crushing strength One Numbert less than 35One Kilo Gram. / Sq.cm. in Cement Mortar 1:5 (1- Cement: 5-Coarse sand)

Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gates, frames, guard bar, grills, gratings, ladder, railings, brackets, and similar works

M & L for surface excavating the area n exc 30 cm deep in hard/dense soil, removing all weeds and breaking earth clods with bamboo/wooden rod and preparing and refilling the excavated area with fertile soil mixed with well decomposed cowdung or faOne Running Meteryard manure at the rate of 10 One Kilo Gram/10 One Square Meter area and also pesticides for controlling soil born insects & pests for 15 cm top soil layer (total thickness shall be 500mm)etc . complete all as specified and directed.

Providing and laying Neelgiri/Mexican grass turf with earth 50mm to 60mm thickness of existing ground prepared with proper level and ramming with tools wooden (DhuOne Running Meteros) and than rolling the surface with light roller make the surface smoothen and light waterning with sprinkler and maintenance for 30 days or more till the grass establish properly, as per direction of officer-in-charge

Providing and stacking of Polyalthia longifolia (Ashok) of height 180- 195 cm. in gunny bag of size 30 cm as per direction of the officer-in- charge.

Providing and stacking of Mangifera indica (Mango-grafted ) of height 60 75 cm. in big poly bag of size 25 cm as per direction of the officer-in- charge

Providing and stacking of Phyllanthus emblica (Amla) of height 150-165 cm. in Big HDPE Bag as per direction of the officer-in-charge.

Providing and stacking of Azadirachta indica ( Neem ) of height 120- 130cm in big polybag of size 25 cm as per direction of the officer-in- charge

Providing and stacking of Allamanda violacea of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and stacking of Alpinia Variegated (three in one) having ht. 30 cm and above, with fresh and healthy variegated foliage in 25 cm size of Earthen Pot/Plastic Pot & as per direction of the officer-in-charge

Providing and stacking of plant Canna dwarf of height 25 to 30 cm., 2 to 3 suckers in earthen pots of size 20 cm Earthen Pot/Plastic Pot and as per direction of the officer-in-charge

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. (upto 10 ton)

Surface excavation n .exc 30 cm deep and averaging 15cm deep and getting out In any type of soil complete all as specified and directed by Engineer-in-Charge.

Providing and fixing pre-cast Inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed by mechanically pressed and as per approved design including 35mm Sand layer for levelling and filling the joint with sand in proper line and level etc complete.

Painting name/ Letters/ marking with Paint over wall.

Supplying & fixing of SS Etching Sign Boards 12" x 3 " for rooms with proper fixing arrangement.

Half brick thick honey- comb brick work with common burnt clay building bricks having crushing strength One Numbert less than 35 One Kilo Gram/Sq.Cm. (i) In Cement Mortar 1:4 ( 1- Cement : 4 - coarse sand)

M & L for Brick-bat filling

M & L for PCC 1:1.5:3 (20 mm graded aggt) as in landings, cover slabs (for man holes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces

Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm One NumbeOne Running Meterinal size) and curing complete including cost of foOne Running Meterwork in (A) Wall Caps / Coping (upto 10 ton)

M & L for 15mm Thick Rendering in CM 1:4 finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge.

Providing and fixing factory made precast RCC perforated drain covers, having concrete of strength One Numbert less than M-25, of size 1000 x 450x50 mm, reinforced with 8 mm dia four One Number longitudinal & 9 One Number cross sectional T.M.T. hoop bars, including providing 50 mm dia perforations @ 100 to 125 mm c/c, including providing edge binding with M.S. flats of size 50 mm x 1.6 mm complete, all as per direction of Engineerin- charge

S & F of SRFC Manhole cover 600 x 450 for soakage pit complete all as specified

SITE CLEARANCE Earthwork for embankment including breaking clods, dressing with all lead and lift (excluding watering and consolidation)(C) From Borrow area within 1.0 Km.lead (upto 10 ton) including Rolling levelling & watering of earth work as directed

Earthwork in cuting in all sorts of soil and soft murrum including conveying and spreading the stuff, embankment as and where directed within 200meters from the end of the cutting with all required lead and lift.

BOREWELL Boring / drilling bore well of required dia for casing / strainer pipe, by suitable method prescribed in IS: 2800 (part 1), including collecting samples from different strata, preparing and submitting strata chart / bore log, including hore & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer in-charge, beyind 90 metre & up to 150 metre depth below ground level. All types of soil: 300 mm diameter (2 x 100 meters = 200 meters total length)

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine / medium / coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge.

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410, mild steel, screwed and socketed / plain ended casing pipes of required dia, confoOne Running Metering to IS: 4270, of reputed & approved make, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacturer, including required hire & labour charges, fittings and accessories, all complete, for all depths, as per direction of Engineer-in- charge. 200 mm One NumbeOne Running Meterinal size dia having minimum wall thickness 5.40 mm (2 x 80 meters = 160 meters)

Supplying, assembling, lowering and fixing in vertical position in bore well, ERW (Electric Resistance Welded) FE 410, plain slotted (having slot size of 1.6 / 3.2 mm), mild steel, threaded and socketed / plain bevel ended casing pipe (Type A) of required dia, confoOne Running Metering to IS: 8110, of reputed & approved make, having wall thickness One Numbert less than 5.40 mm, including painted with outside surface with two coats of anticorrosive paint of approved brand and manufacturer, including required hire & labour charges, fittings and accessories, all complete, for all depths, as per direction of Engineer-in-charge. 200 mm One NumbeOne Running Meterinal size dia (2 x 20 metres = 40 meters total length)

Development of tube well in accordance with IS: 2800 (part 1) and IS: 11189, to establish maximum rate of usable water yield without sand content (beyond peOne Running Meterissible limit), with required capacity air compressore, running the compressor for required time till well is fully developed, measuring yield of well by "V" One Numbertch method or any other approved method, measuring static level & draw down etc. by step draw down method, collecting water samples & getting tested in approved laboratory, including disinfection of tubewell, all complete, including hire & labour charges of air compressor, tools & accessories etc., all as per requirement and direction of Engineer-in-charge. (2 x 8 hours = 16 hours total for 2 tube wells)

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of bore well housing / casing pipe, removable as per requirement, all complete for borewell of 200 mm clamp

Providing and fixing M.S. Clamp of required diameter to the top of casing / housing ppe of tube well as per IS: 2800 (part 1), including necessary bolts & nuts of required size complete. - 200 mm clamp

Providing and fixing Bail plug / Bottom Plug of required dia to the bottom of pipe assembly of tubewell as per IS: 2800 (part 1): 200 mm clamp

RECHARGE PIT Boring/drilling bore well of required dia for casing/ strainer pipe, by suitable method prescribed in IS: 2800 (part I), including collecting samples from different strata, preparing and submitting strata chart/bore log, including hire & running charges of all equipments, tools, plants & machineries required for the job, all complete as per direction of Engineer in-charge, upto 90 metre depth below ground level All types of soil: 300 mm diameter (2 x 50 meters = 100 meters total length)

Supplying, assembling, lowering and fixing in vertical position in bore well unplasticized PVC medium well screen (One Running MeterS) pipes with ribs, confoOne Running Metering to IS: 12818, including hire & labour charges, fittings & accessories etc. all complete, for all depths, as per the direction of Engineer-in-charge. 200 mm One NumbeOne Running Meterinal size diameter

Supplying, filling, spreading & levelling stone boulders of size range 5 cm to 20 cm, in recharge pit, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge.

Supplying, filling, spreading & levelling gravels of size range 5 cm to 10 cm, in recharge pit, over the existing layer of boulders, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in-charge.

Supplying, filling, spreading & levelling coarse sand of size range 1.5 mm to 2 mm, in recharge pit, over gravel layer, in the required thickness, for all leads & lifts, all complete as per the direction of Engineer-in- charge.

Gravel packing in tubewell construction in accordance with IS: 4097, including providing gravel fine / medium / coarse, in required grading & sizes as per actual requirement, all complete as per direction of Engineer- in-charge.

Providing and fixing factory made precast RCC perforated drain covers, havng concrete of strength One Numbert less than M-25, of size 1000 x 450 x 50 mm, reinforced with 8 mm Dia four numbers of logitudinal & 9 numbers cross sectional T.M.T. hoop bars, including providing 50 mm diameter perforations @ 100 to 125 mm centre to centre, including providing edge bridging with M.S. flats of size 50 mm x 1.6 mm complete, all as per the direction of Engineer-in-charge.

ROAD Box cutting the road surface to proper slope and camber for making a base for road work including removing the excavated stuff and depositing on the road side slope as directed upto 50Mt.lead.

Earthwork for embankment including breaking clods, dressing with all lead and lift (excluding watering and consolidation)(E) From Borrow area within 3.0 Km. lead (upto 10 ton)

Rolling of earthwork in layers with power roller including filling in depressions which occur during the process. (upto 10 ton)

Watering of earth work as directed.

Construction of granular sub-base by providing close graded material, spreading in unifoOne Running Meter layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete.

Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to site, laying in unifoOne Running Meter layers with paver in sub- base / base course on well prepared surface and compacting with vibratory roller to achieve the desired density.

2cm. thick open - graded pre-mix carpet surfacing with 0.27 cu.m. stone chippings (12mm size 0.18cu.m. and 10mm size 0.09 cu.m.) mixed with 14.4 One Kilo Grams. of bitumen per 10 Sq.M. of road surface excluding rolling and consolidetion etc. complete. (Stone chippings and Bitumen shall be paid separately)(i) With tack coat at rate of 5.0 One Kilo Gram. /10 Sq.M. (upto 10 ton)

Labour charges for laying premixed bituminious macadam / concrete / carpet etc. by hot mix laid process including heating the asphalt and aggregates by continuous hot mix,transporting the mix and spreading the same by paverfinisher and consilidation with powerroller including providing and layingunifoOne Running Meteraly tack coat includingproviding and laying unifoOne Running Meteraly tackcoat including necessary fire wood oillubricants, labour charges and hirecharges of the required plant and machineries etc. complete.

Consolidation of 2cm. thick open graded premixed asphalt carpet with power roller including cost of fuel hire charges of roller etc. complete.

Cost of VG-40 Asphalt

Providing and laying seal coat sealing the voids in a bitumiOne Numberus surface laid to the specified levels, grade and cross fall using Type A seal coats

Removal of unserviceable soil including excavation, loading and disposal upto 1000 metres lead.

Providing and laying of Hot applied TheOne Running Meteroplastic compound 2.5 mm thick including Reflectorising Glass Beads @ 250 gms per One Square Meter area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 & finished surface to be level, unifoOne Running Meter and free from streaks and holes. (As per Government letter One Number.SOR 102003/94/S-1/ Dated.20-7- 2004)

Providing and stacking of Citrus limon/ lemon tree of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Punica granatum/ Pomegranate of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in- charge.

Providing and stacking of Sapodilla/ Chikoo tree of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of almond tree of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Nirgudi of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Ardusi of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Lantana Sellwiana (Blue) of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge.

Providing and stacking of Brinjal Plant of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and stacking of Tuar Plant of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and stacking of Lady finger of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and stacking of nagarvel. in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and stacking of Crinum AsiatiOne Cubic Meter of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge

Providing and stacking of Aloevera of height 30 cm to 45 cm. in poly bag of size 20 cm as per direction of the officer-in-charge

Providing & Fixing of Marble / Sandstone Fountain with all necessary connection complete for PHC garden as per direction of the officer-in- charge.

Providing & Fixing of Marble / Sandstone Sculptures complete for Residence garden as per direction of the officer-in-charge.

Providing & Fixing of Garden benches for PHC garden as per direction of the officer-in-charge.

Providing & Fixing of Garden benches for Residence garden as per direction of the officer-in-charge.

Providing material and labour for fixing 6mm thick Aluminium composite sheet (ACP) Sheet of any size, any shape, any color, any texture of approved make and as per approved sample (approved by architect). ACP sheet shall be fixed in aluminium frame and shutter work with necessary cutting of sheet, single side, double side coloured as per drawing & specifications including providing and fixing EPDM quality rubber/ silicon sealant/ adhesive tape/ screwing on the periphery of the sheet as per the required thickness etc. complete at all floors/ all levels/ all heights as per the drawing & directed by Engineer in charge. Cut edges of the ACP sheet shall be provided with masking tape. Actual installed quantity shall be measured and paid.

Total Cost of Buildings, Plumbing & Sanitary Fixtures, Road, Sewer Line, Compound Wall, Area Drainage, & Gate & Landscaping (A) INTERNAL ELECTRIFICATION One Point wiring for Light / Bell with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A Modular type switch / bell push & accessories and earth continuity of following type, erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected, with necessary Lamp holder/ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme Switch/Sockets: Legrand, MK, Havells

One Point wiring for Two Way Controlled Light One Point with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (green) both are of .ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires erected in below type of pipe with 6A Modular type switches and following type of accessories erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary batten/angle holder or ceiling rose or H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme Switch/Sockets: Legrand, MK, Havells

One Point wiring for FAN with 2-1.5 sq.mm & earthwire of 1.5 sq.mm (Green) both are of .ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured/metallic front plate modules erected on / in wall / ceiling as per pipe erected. with necessary ceiling rose / H.D.Connector as directed. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme

One Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm Cu. Wire from nearby switchboard/mcb db board (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme Switch/Sockets: Legrand, MK, Havells

One Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories. [II] For 16A Plug with 2- 2.5 sq.mm Cu. Wire (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme Switch/Sockets: Legrand, MK, Havells

One Point wiring for Individual Plug with & earthwire of 1.5 sq.mm (Green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multistrand copper wires, in below type of pipe erected complete with Modular type switch & 5 pin Plug erected on PVC / Metallic/Wooden box covered with appropriate front plate modules erected on / in wall / ceiling as per pipe erected with following type of accessories.[III] For 16A Plug and 16 amp switch with 2-4 sq.mm Cu. Wire with 2.5 sq.mm ( green) earthing wire from mcb d b board. (f) with medium class Rigid PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme Switch/Sockets: Legrand, MK, Havells

One Point wiring for Looped Plug with 6A Modular type switch & 5 pin socket erected on PVC / Metallic/Wooden box, single mounting base frame covered with textured / metallic front plate modules erected on / in wall / ceiling with following type accessories. Cat. III Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme Switch/Sockets: Legrand, MK, Havells

Providing following type of Modular Type Accessories mounted with pvc / metallic/Wooden box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge. (3) Two Pin/RJ-11 Telephone Socket [A] For One Gang Cat. III One Numberte: Consider same make of Switch & Sockets Make: Legrand, MK and Havells

Providing following type of Modular Type Accessories mounted with pvc / metallic/Wooden box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge. (4) TV Co-axial Socket outlet Cat. III One Numberte: Consider same make of Switch & Sockets Make:

Providing following type of Modular Type Accessories mounted with pvc / metallic/Wooden box, single mounting base frame covered with textured / metallic front plate , modules erected with necessary connection. As desired by Engineer In charge. (8) Modem Jack for Computer Open RJ-45 One Numberte: Consider same make of Switch & Sockets Make: Legrand, MK and Havells

Providing & Erecting approved make following size of TV Co-axial flexible cable comprising inner conductor of solid bare copper insulated with Foam PE & Secondary conductor made of poly - Aluminium film bonded Al. Braids @ suitable coverage overall sheathed with black PVC insulation. b).RG-6 Make: Polycab, RR Kabel, Havells

Supplying & erecting approved make Telephone Cable electrolytic copper conductor PE insulation twisted in two One Pairs, & wrapped with FRLS PVC tape & sheathed with FRLS PVC or HFFR outer Jacket suitable for telephone wiring & confiOne Running Metering to C-DOT erected in existing pipe. of following size of conductors & One Number.of One Pairs. With necessary connections. [A] Conductor Size 0.5 mm (a) UnaOne Running Meteroured 2) Two One Pairs Make: Polycab, RR Kabel, Havells

Providing & erecting main Distribution (MDF) indoor type, back mounted frame as per DoT standard approved with krone strips. (b) Suitable for 20 One Pair

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, confiOne Running Metering to IS 13032 and BS 5486-1986,IP-54 suitable for 250 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be used of same company of MCB to be used) (A) Three phase 4 way SS Double door for single phase outgoing. Make: Schneider, Legrand, L & T

Providing and erecting Sheet Steel powder coated Vertical MCB distribution board (VTPN) - flush / surface mounted double door (IP54) fitted with insulated copper busbar, isolated neutral link, earth bar and DIN rail, confiOne Running Metering to IS 13032 and BS 5486-1986,IP-54 suitable for 250 AMP TPN MCCB + RCCB as incomer and three phase outgoing as per following .(The DBs should be used of same company of MCB to be used) (B) Three phase 6 way SS Double door for single phase outgoing. Make: Schneider, Legrand, L & T

Providing and erecting Sheet Steel powder coated MCB distribution board - flush / surface mounted fitted with busbar, neutral link, earth bar and DIN rail, ConfoOne Running Meters to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate One Number. of MCBs.(The DBs should be used of same company of MCB to be used) suitable for (B) three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) (b) sheet steel double door (i) 4 way Make: Schneider, Legrand, L & T

providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to operate on 240 V A.C. system and having breaking capacity 10 KA to be erected in existing box. confiOne Running Metering to IS 8828/1996 with ISI Mark Make: D'MAK™, Legrand, L & T

providing and erecting Approved make ELCBs / RCCBs confoOne Running Metering to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and suitable for operation on 3 phase and neutral 415V,50Hz. having characteristic of quick action & tripping with all advance feature & do One Numbert incorporate any electronic component for following Max. rating erected as directed. (ii) 40Amps. FP Make: D'MAK™, Legrand, L & T

providing and erecting Approved make Four pole moulded case circuit breaker having breaking capacity ICU of 25 KA. at 415 V,having One NumberOne Running Meteral current rating up to 25 A to 100A. with Fixed theOne Running Meteral & magnetic release suitable to work on A.C. supply 50 c/s. with all internal connections & complete erected in existing 16 G.M.S. housing. ICS=100% of ICU only Cat III Make: D'MAK™, Legrand, L & T

Supplying & erecting 20 Amp 10 KA ‘C Curve’ single pole MCB with 20 Amp. Plug socket, company fabricated powder coated sheet steel enclosure erected as directed with connection. [A] Metal Clad Socket with metal clad top Cat.III Make: D'MAK™, Legrand, L & T

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (a) 2 wire 1.5 sq. mm Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme

Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size (A) with medium class Rigid PVC pipe and accessories (b) 2 wire 2.5 sq. mm Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 4 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size [A] with medium class Rigid PVC pipe and accessories (a) 2 wire 4 sq. mm Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme

Mains with 1.1 KV grade FRLS PVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 4 sq. mm copper conductor FRLS PVC insulated stranded wire of green colour for earth continuity of following size [A] with medium class Rigid PVC pipe and accessories (d) 3 wire 6 sq. mm Make: FR-LSH flexible cable: Polycab, RR Kabel, Havells; Medium grade UPVC conduits: Precision, Prince, Supreme

Providing and erecting Approved make Ceiling Fan with double ball bearing ISI mark with condenser 230 volt A.C. 50 Hz. 1200 mm Sweep complete having 4 blades Aluminium body and blades One Sets having ornamental design shakes, caOne Numberpy & 30 cms. Down rod erected with 24/0.2, 3 core flexible wire with earthing Make: Crompton, Havells, Bajaj, Usha, Orient

Supplying and erecting 19 / 20 mm. One NumbeOne Running Meterinal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper insulation without leakage and earthing.

Providing & erecting fresh air fan 250 mm dia with square frame make of ABS body with louvers Cat.II Make: Crompton, Havells, Bajaj, Usha, Orient

Supplying & erecting single phase approved make industrial exhaust fan suitable for medium duty ring mounted low One Numberise operation suitable for medium duty having following dia size and maximum speed in RPM [A] 305 mm dia 900 RPM Cat.II Make: Crompton, Havells, Bajaj, Usha, Orient

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 45˚ C. The outlet temp. of the water should drop by 15˚ C within a hour, The water cooler should be comprising of heOne Running Meteretically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, theOne Running Meterostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel. Make: Blue Star, Havells, Dakin

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, prefilter housing with 'O' ring presediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. [B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank Make: Blue Star, Havells, Kent

Providing and erecting approved make split air-conditioning unit consisting of copper condensing unit with fan motor, heOne Running Meteretically sealed rotary compressor with accessories etc. duly connected separately erected evaporating unit and blower motor with its accessories by means of extra supplied proper insulated copper tubing,drain PVC pipes suitable for ( cost includes powder coated Stand, Eco Friendly green gas charging, 15A plug top & Remote Control) with necessary core cutting. For 3 Star Rating of current year (b) for 1.5 ton capacity Make: Blue Star, Havells, Dakin

Supplying and erecting horizontal / vertical mounting type storage water heater with copper container housed in M.S./S.S. body insulated with glass wool / puff complete with heating elements,adjustable theOne Running Meterostats 300C to 850C, indicating lamp, safety valve, fusible plug, etc.complete erected with coach bolts, nuts. washers & cementation (A) 10 Ltr. with 3 KW. heating element Cat.III Make: Havells or equivalent model of Recold, AO Smith

Supplying and erecting approved make online Un-interruptible Power Supply system comprising flat One Cubic Meter-boost charger, static Inverter & sealed maintenance free SMF batteries. The charger having operating capacity for input 160-270V AC & inverter having output 230V,50 Hz Ac with 0.8 load power factor with battery, over/under voltage output with over load & short circuit protection equipment. The system housed in CRC sheet duly powder coated paint with following power backup.with MS painted batteries stand, 10% Overload capacity for momentary load. (E) 10 KVA 3 - phase with 1Hr Backup

Providing, erecting, testing & commissioning approved make oil immersed ONAN cooled, double wound, core type indoor / outdoor copper wound 11KV/ 433V step down transfoOne Running Meterer of following capacities operating on 3 phase, 50 Hz 4 wire & neutral earthed system continuously rated for a full temperature rise in oil One Numbert exceeding 45 Deg.C.at maximum ambient temp. of 50 Deg. C. complete with necessary radiator first filling of new transfoOne Running Meterer oil & standard fitting as below complying with IS 1180( Part 1 ):2014 standards with energy efficiency level 2 Off load tap changing range steps +2.5% to -5% on H.V for variation should be provided. The H.V. shall be connected Delta & Secondary with star connection. The transfoOne Running Meterer should have cable-end boxes on H.T. side suitable for up to 3 core 150 sq.mm. XLPE cable & 1. Oil conservator with filling Hole & Cap - One One Number. 2. TheOne Running Meterometer pocket with 6" dial type theOne Running Meterometer switch alaOne Running Meter & trip contacts- Two One Number. 3. Silica-gel breather with charge- One One Number. 4. Plain oil level gauge - One One Number. 5. Drain / Sampling / Filter valve- One One Number. 6. Top Filter Valve - One One Number. 7. Explosion vent with Diaphragm - One One Number. 8. Rating & Diagram plate - One One Number. 9. Additional neutral bushing for earthing - One One Number. 10. Bi directional Roller - Four One Number. 11. Earthing teOne Running Meterinals - Two One Number. 12. Lifting lugs - Two One Number. 13. Air release plug. - One One Number. 14. Double float buchholz relay with AlaOne Running Meter and trip contacts. 15. Control cable as required from TransfoOne Running Meterer to VCB Panel is to be provided with necessary connection to VCB relays for protection. as per IS 1180 level-2 (a)160 KVA Max. allowable loses at 50 % of rated load is 0.98 KW and at full load is 2.93 KW Make: Kirloskar, Crompton Greaves, One Cubic Metermins

Providing & erecting approved make AMF control panel suitable for following size of 3 phase, 415 V., 50 cycles, A.C. diesel generating One Set complete of scope as detailed below: 1) Power module: A One Pair of electromechanically interlocked contactors (for mains & generator) Overload relay for generator contactor Neutral contactor for mains and generator Power socket for connections. 2) Control and metering module: Line voltage monitor. Generator voltage monitor Ammeter 3 items attempt start facility. Air circuit breakers/MCB/MCCB of suitable rating for auto/manual operation. Auto/manual switch. Emergency stop push buttons. Manual start push button. frequency meter. Engine hour meter. Two earthing studs. 3) Protection module: The engine shutdown in the unlikely event of Low lube oil pressure High cylinder head temperature. V belt failure. 4) Indicators with alaOne Running Meter Load on generator. 5) Indicators Load on mains Engine fails to start . Emergency stop battery charger. The AMF Panel of following capacity AMF Control Panel for100 KVA/125 KVA3 phase DG One Set Make: D'MAK™, L & T, Schneider, Siemens, ABB

Supply, installation, testing and commissioning of factory made, CPRI type tested, indoor cubical compartmental type MAIN LT PANEL of suitable size, confoOne Running Metering to IEC 61439-1 & 2 and IEC 61641, having both sides openable with hinged double doors and locking arrangement, IP 43 protection made out of 2.0 mm thick mild steel CRCA sheet, supported and fixed on structural frame of angle iron of suitable size, including earthing stud, labelling, painting to all internal & external exposed steel surfaces with powder coating paint (7 tank process), duly fixed in ground with PCC foundation (1:2:4) type B1, with danger One Numbertice plate of 1.6 mm thick mild steel vitreous enamelled (white) with letters, figures and conventional skull and bones in signal red colour suitable for 3- Phase, 4 Wire system, 500 V grade with necessary wiring, PVC sheathed stranded copper conductor of appropriate length and size, including fixing lugs, bolts, screws, etc. complete as specified and directed by engineer-in-charge. Make: D'MAK™, L & T, Schneider, Siemens, ABB [A] BUSBAR CHAMBER [i] 01 One Set (3L + N) of copper busbar of rated capacity 320 A, covered with PVC insulated sleeves including insulator, nuts, bolts, etc. with complete connection [i] 200 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, confoOne Running Metering to IEC 60947-2, having microprocessor based trip unit, adjustable overload One Setting (0.7 - 1 X In), adjustable short-circuit One Setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alaOne Running Meter & Overload), etc.- 01 One Number. [ii] Cl 1.0 multi-function meter capable of measuring V, A, F, PF, W/VA, Wh/VAh, Runhrs. Onhrs & interupts- 01 One Number. [iii] LED phase indicators (Red, Yellow, Blue)- 01 One Set [C] OUTGOING [i] 100 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, confoOne Running Metering to IEC 60947-2, having microprocessor based trip unit, adjustable overload One Setting (0.7 - 1 X In), adjustable short-circuit One Setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alaOne Running Meter & Overload), etc.- 01 One Number. [ii] 63 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, confoOne Running Metering to IEC 60947-2, having microprocessor based trip unit, adjustable overload One Setting (0.7 - 1 X In), adjustable short-circuit One Setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alaOne Running Meter & Overload), etc.- 02 One Number. [iii] 32 A, 415 V, Ics = 100% Icu = 25 kA, 50 Hz FP MCCB, confoOne Running Metering to IEC 60947-2, having microprocessor based trip unit, adjustable overload One Setting (0.7 - 1 X In), adjustable short-circuit One Setting (5 - 10 X Ir), adjustable neutral protection (N, N/2, OFF), front indication LEDs (Ready, Overload and pre-alaOne Running Meter & Overload), etc.- 02 One Number. [iv] LED phase indicators (Red, Yellow, Blue)- 05 One Set [v] Digital ammeter of suitable capacity with suitable CTs for One Each feeder- 05 One Number.

Providing and erecting XLPE(IS:7098)(I)-88 ISI aOne Running Meteroured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (A) 3 1/2 core 25 Sq. mm ( 16 Sq. mm 1/2 core) Make: Polycab, RR Kabel, Havells

Providing and erecting XLPE(IS:7098)(I)-88 ISI aOne Running Meteroured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (B) 3 1/2 core 50 Sq. mm ( 25 Sq.1/2 mm core) Make: Polycab, RR Kabel, Havells

Providing and erecting XLPE(IS:7098)(I)-88 ISI aOne Running Meteroured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (E) 3 1/2 core 120 Sq. mm ( 70 Sq. mm 1/2 core) Make: Polycab, RR Kabel, Havells

Providing and erecting XLPE (IS:7098)(I)-88 ISI aOne Running Meteroured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (c) 4 core 10 Sq. mm Make: Polycab, RR Kabel, Havells

Providing and erecting XLPE (IS:7098)(I)-88 ISI aOne Running Meteroured cable multistrand / Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of

Supplying and erecting of 4.5 Meter Decorative Street light Pole 100/200 AF - Top/Bottom , 3 mm sheet thickness with 350 x 350 x 20mm Base Plate (310 PCD), With M 24 x 600 mm Foundation Bolts and 1 Meter Single AOne Running Meter Hot Dip Bracket(48mm OD Pipe). Make: Ambika Poles Pvt Ltd., NST Steel Tubes Pvt Ltd. & kesslec Pvt Ltd

Supplying & erecting earth pit of minimum bore dia.150mm size approved make Earthing Electrode consisting Pipe-in-Pipe TechOne Numberlogy as per IS 3043-1987 made of corrosion free hot dipped G.I.Pipes having Outer pipe dia of 50mm having 80-200 Micron galvanising, Inner pipe dia of 25 mm having 200-250 Micron galvanising, connection teOne Running Meterinal dia of 12mm with constant ohmic value surrounded by highly conductive compound with high charge dissipation suitable for following type of applications with chamber and heavy duty cover.(approved make OEM has to submit test certificate) & having back filling compound of (B) Inner chemical (CCM Compound)- Resistivity:- 0.2 □/ meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at One Number load & dry foOne Running Meter, Sulphar content:- <2%(C) Back fill Compound :- Earthing compound should be capable to retain moisture for long time Necessary test report must be submitted. (c) For Electrical Installation covering TransfoOne Running Meterer Neutrals, Lightning arrester Earthing, A.C.Plant & Sensitive Computer System(like Automation, SCADA) i.e independent Earthing in One NumberOne Running Meteral soil. Length of Pipe : 3.00 mtrs Back filling Compound :2 One Number Bags of

Providing and erecting required size HOT deep Galvanised iron strip for earthing of H.T. , OCB/ ACB/ TransfoOne Running Meterer LT panel board, Motors etc. using proper clamp.

Supplying, installing, testing & commissioning of SOLAR WATER heating system as per prevailing IS code comprising of Solar flat locket collector, stainless steel hot water storage isolated tank with S.S. heat exchanger, absorber made of copper sheet & copper tube of following capacity in liter / day (LPD) with "B" size aluminium box collector with appropriate capacity electrical backup arrangement (Excluding inlet & outlet pipe lines) [D] Capacity of 500 LPD Make:- Lobel Solar Power System, Sunline Energy

Supplying & erecting resin bonded flap rock wool / glass wool with conductivity valve 1.67 sq.mm per watt & to with stand the temp. to 100 degree centigrade C thickness 50mm with G I pipe of following size dia "B" class as per IS:1239. The plastic sheet to be used as covering of glass wool. Al. cladding besides other materials like chicken mesh, 26 G Al. Sheet shall be used for cladding the insulation pipe. [C] for 32 mm dia pipe

Supplying & erecting 12mm composite pipe manufactured from polythene material with destructed theOne Running Meteral expansion of 25 10-6 / degree kelvin (low expansion Co-efficient), resistant to freezing theOne Running Meteral conductivity 0.43 watt / (m degree kelvin) UV resistant suitable for continuous operating temperature of 95 degree centigrade & rated pressure of 6.9 One Kilo Gram / sq.cms at 850 degree centigrade. The kitec pipe shall have chemical composition prepared as per ASTMF 1282-02 specifications (Pressure rating of 13.8 One Kilo Gram per sq.cms. & 11 One Kilo Gram per sq.cms at 60 degree) The pipe shall be duly jointed by comprising crimp fitted with internal as well as external end sealing arrangement. [B] For 16 mm pipe Make: Tata, Jindal, BST

Supplying & erecting 12mm composite pipe manufactured from polythene material with destructed theOne Running Meteral expansion of 25 10-6 / degree kelvin (low expansion Co-efficient), resistant to freezing theOne Running Meteral conductivity 0.43 watt / (m degree kelvin) UV resistant suitable for continuous operating temperature of 95 degree centigrade & rated pressure of 6.9 One Kilo Gram / sq.cms at 850 degree centigrade. The kitec pipe shall have chemical composition prepared as per ASTMF 1282-02 specifications (Pressure rating of 13.8 One Kilo Gram per sq.cms. & 11 One Kilo Gram per sq.cms at 60 degree) The pipe shall be duly jointed by comprising crimp fitted with internal as well as external end sealing arrangement. [C] For 20 mm pipe Make: Tata, Jindal, BST

Cutting the heavy duty pipe and threading one end of pipe with 8 TPI / 11 TPI as per requirement and including to and fro charges. (E) 100mm (4") dia pipe

Supplying ISI Marked (Embossed) following size of Heavy duty “C” Class G.I . Pipe & erecting as directed by Engineer-in-charge with necessary plumbing as desired. (F) 80 mm dia. Make: Tata, Jindal, BST

Supplying ISI Marked (Embossed) following size of Heavy duty “C” Class G.I . Pipe & erecting as directed by Engineer-in-charge with necessary plumbing as desired. (E) 65 mm dia. Make: Tata, Jindal, BST

Supplying ISI Marked (Embossed) following size of Heavy duty “C” Class G.I . Pipe & erecting as directed by Engineer-in-charge with necessary plumbing as desired. (D) 50 mm dia. Make: Tata, Jindal, BST

Supplying ISI Marked (Embossed) following size of Heavy duty “C” Class G.I . Pipe & erecting as directed by Engineer-in-charge with necessary plumbing as desired. (C) 40 mm dia. Make: Tata, Jindal, BST

Supplying ISI Marked (Embossed) following size of Heavy duty “C” Class G.I . Pipe & erecting as directed by Engineer-in-charge with necessary plumbing as desired. (B) 32 mm dia. Make: Tata, Jindal, BST

Providing, installation, testing and commissioning of stainless steel Y-strainer 80 mm NB of size fabricated out of 1.6 mm thick stainless steel, Grade 304, sheet with 3 mm dia holes with stainless steel flange. Make: Kirloskar, Leader, Venus

Providing & erecting open well horizontal moOne Number block pump One Set with cast iron body, complete for three phase submersible motor having [D] For 5 HP 3 phase open well horizontal moOne Number block pump One Set suitable for 1350 LPM to 310 LPM @ 10 to 42 Mtr head suitable for 50/65 mm dia delivery pipe- cat ii Make: Kirloskar / Beat & Crompton / CRI , Grundfos / Mather & Platt

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with One Numbern rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and confoOne Running Metering to IS 780 of following sizes as required: 80 mm NB Make: Kirloskar, Leader, Venus

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with One Numbern rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and confoOne Running Metering to IS 780 of following sizes as required: 65 mm NB Make: Kirloskar, Leader, Venus

Supplying, fixing, testing & commissioning of double flanged sluice valve of rating PN 1.6 with One Numbern rising spindle, bronze/gun metal seat, ISI marked complete with nuts, bolts, washers, gaskets and confoOne Running Metering to IS 780 of following sizes as required: 40 mm NB Make: Kirloskar, Leader, Venus

Providing, installation, testing and commissioning of One Numbern-return valve sizes confiOne Running Metering to IS: 5312 complete with rubber gasket, GI bolts, nuts, washers etc.as required : 80 mm NB Make: Kirloskar, Leader, Venus

Supplying and erecting Direct-on-line, Starter with 15A.rating contractor and with 4-14A. range, directly operated theOne Running Meteral overload relay in sheet steel enclosure for 3phase 415V.50 c/s. A.C. motor up to 7.5 H.P.complete erected on P.W. Block with necessary connection. Make: D'MAK™, Havells, L & T

Providing and erecting XLPE (IS:7098)(I)-88 ISI aOne Running Meteroured cable multistrand / Solid Aluminium conduc tor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables (b) 4 core 6 Sq. mm Make: Polycab, RR Kabel, Havells

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed. h) 2.50 Sq.mm 3 core round PVC sheathed Make: Polycab, RR Kabel, Havells

Supplying, installation, testing and commissioning of electric driven terrace pump having 450 litre/min discharge @ 35 m head suitable for automatic operation and consisting of following, complete in all respects, as required: (Terrace Pump) (a) Horizontal type, multistage, centrifugal, split casing pump of cast iron body & bronze impeller with stainless steel shaft, mechanical confiOne Running Metering to IS : 1520 (c) M.S.fabricated common base plate, coupling, coupling guard, foundation bolts etc.as required. (d) Suitable cement concrete foundation duly plastered and with anti vibration pads. Make: Kirloskar, SPP Pumps, Precision Engineering Works

Providing and erecting XLPE(IS:7098)(I)-88 ISI aOne Running Meteroured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. (C) 3 core 6 Sq. mm Make: Polycab, RR Kabel, Havells

SITC of Microprocessor based Net-workable Analogue Addressable Fire AlaOne Running Meter Control Panel. The Panel shall be compliant with EN54-2, EN54-4 and approved by LPCB. The Fire AlaOne Running Meter Control Panel shall have inbuilt one loop. The Panel must have large graphic display. The Panel must also have the capability to take Addressable Intelligent Wired and Wireless Devices on same loop. One Each loop shall have a capacity of 127 analogue Addressable devices and 127 Base sounders/Base Sounder Beacons. The Panel shall have 240 V AC power supply along with automatic Battery Charger. One Numbern-Networkable Approved by LPCB Make: ONYX- One Numbertifier, XLS-3000- Honeywell

SITC of Analogue Addressable Single Input Module. which Includes a single monitored input, flying leads for easy installation. Electronically addressed, Approved by LPCB & Vds. Make: ONYX- One Numbertifier, XLS- 3000- Honeywell

SITC of Manual Call One Point approved to EN54-11:2001, Approved by LPCB Easy to install, push-fit wiring teOne Running Meterinals Make: ONYX- One Numbertifier, XLS-3000- Honeywell

Supplying and erecting Flexible PVC insulated multi strand multi core 1.1 kv grade ISI marked copper wires of following size to be erected as directed. d) 1.50 Sq.mm 2 core round PVC sheathed Make: Polycab, RR Kabel, Havells

Supplying and fixing first-aid Hose Reel with MS construction spray painted in post office red, confoOne Running Metering to IS 884 complete with the following as required.20 mm One NumbeOne Running Meterinal internal dia water hose theOne Running Meteroplastic (Textile reinforced) type -2 as per IS: 12585 20 mm One NumbeOne Running Meterinal internal dia gun metal globe valve & One Numberzzle. Connections from riser with 25 mm dia stop gun metal valve & M.S. Pipe and socket. 30 m Drum and brackets for fixing the equipmets on wall. Make: Newage, AAAG, Minimax

Supplying & erecting ABC powder type 'Ceasefire' type Fire extinguisher as per IS 13849 or 1 One Kilo Gram capacity with necessary clamp for erection on wall Make: Newage, AAAG, Minimax

Supplying & erecting carbon dioxide (CO2) fire extinguisher user of following capacity with necessary clamps made from 50 x 6 mm M.S. Flat with nut & bolts grouted in wall complete. Make: Newage, AAAG, Minimax

SITC of 43 Inch 500 NTS Brightness professional Display with Direct- Type LED, Viewing Angle : 178 Degree Verti, 178 Degree Hor. Operation 27x7, Native Resolution 3840 x 2160 (16:9) - UHD, 4 x USB (2 x 2.0, 1 x 2.0 internal, 1 x Type C), 0-40°C, ≤0.5 W, HTML 5 Browser Opera(4.9), Yes(internal) IEEE 802.11 a/b/g/n Dual WiFi certificated, BIS, YES CLASS A 3dB margin. Make: Samsung/Panasonic/LG or equivalent

Supply, installing testing and commissioning of CP PLUS 16 channel NVR: CP UNR- 4K564R8-V2 with following specifications: (i) Bandwith: 200 MBPS (ii) H.265 techOne Numberlogy (iii) Max channel : 16 channels, support upto 8 mp (iv) Support: 8 SATA HDD, of 8 TB (v) Smartphone Network: Android and iOS Make: GRE Enterprise, Ivalue Systech Pvt. Ltd, Priyanshi Enterprise Solutions

Supply, installing testing and commissioning of CP PLUS IP camera with following specifications. (i) Bullet: 2MP, 1/2.7" CMOS image sensor, low illuminance, high image definition, Built-in IR LED, max IR distance: 30 m, CP-UNC-TA21PL3 Make: GRE Enterprise, Ivalue Systech Pvt. Ltd, Priyanshi Enterprise Solutions

SITC of 24 x 10/100/1000BASE-T ports 4 x Gigabit RJ45/SFP Combo ports Advanced L2 switching and security features L2+ Static Routing Optional “standard mode” or “surveillance mode” management user interface Make: Hikvision DS-3E0326P-E/M

Supply, installing testing and commissioning of 4 TB Surveillance Hard drives Make: Western digital (W.D)/Toshiba/segate

Supply, installing testing and commissioning of PVC box 5" x 5" heavy box for CAMERA WITH D-LINK connectors.

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction [C] CAT - 6 Make: Polycab, RR Kabel, Havells

M & L for rack for DVR safety.

Supply, installation, testing and commissioning of Roof Mounted Type Solar PV Modules minimum rating of 330 Wp shall be poly Crystalline type, the module efficiency shall be more than 16.99 %at Standard test conditions with anti reflective coating and anti dust coating confiOne Running Metering to IEC 61215 and IEC 61730 complete all as specified and directed by the engineer- in- charge. Make: Waaree, Vikram, Tata solar any reputed Indian Manufacturer

Supply, installation, testing and commissioning of 15 kW of String Inverter(DC to AC 415 Volt, 15 KW at given load condition)IP 65 out door wall mountaing,with efficiency One Numbert less than 97% confiOne Running Metering to IEC 600682-2/vde standards with multifunctional LED indications with alaOne Running Meter , (1) One NumbeOne Running Meterinal Voltage-415 V +/-10 % ,3 Ph ,50 Hz (2) Micro Prcwssor /Dsp micro Controller based system (3)Total HoOne Running Meteronics Distrotion <3 % (4)Inverter should be capable of Synchronisation with grid supplyt and DG One Set supply.complete all as specified and directed by the engineer- in- charge. Make: FIMER (ABB) , Hitachi any Reputed Manufacturer

M & L for Hot Dip Galvanized MMS Structure( HDGI zinc coating shall be as per IS 4759. Necessary testing provision for MMS to be made Minimum 80 micron Galvanization)C chanel Should be 40*40*40 mm.The Rectangular/ square/ circular hollow pipe section used for the structure should have a minimum thickness of 2.0 mm. Other than above, the material thickness should be minimum 2.5 mm.The total load of the structure (when installed with PV modules) on the terrace should be less than 60 One Kilo Gram/m2 .The minimum clearance of the structure from the roof level should be 300 mm with SS304 fastners and all required accessories like Clamps,Nuts, Bolts, Cable Ties Etc as all specified and directed.

S & F of Outdoor type IP55, powder coated, 1 In 1 Out LT Panel configuration with 32 A MCB, AC SPD Type 2 complete.Minimum Size of Enclosure Should be 400x300x155 (IP55) Along with 4 pole MCB 32 Amps,AC Surge Protection Device-3ph of 40kA(as per IEC 60364-5- 53),4 Indication Lamp-R, Y, B.,with multi functional meter 3 phase, 415 Volt(Voltage , Current, Power and Energy Measurement),Including Copper Busbar with NVR and contactor including connecting lugs and Double compression glands etc complete ass specified and directed. Make: Switchgear: Siemens,L&T,Legrand ,Schneider, SPD: Citel/ Phoenix/ OBO

Providing and erecting XLPE(IS:7098)(I)-88 ISI aOne Running Meteroured cable multistrand Copper conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe at road crossing or floor of following size of cables. (C) 4 core 10 Sq. mm Make: Havells, Polycab, RR Kabel

M & L for 4 Sq mm single core DC copper flexible Solar Multi Stranded Sheathed Cable (Photovoltaic power cables, halogen free, flame retardant, As per EN50618 approval) flexible Solar Cable complete as all specified and directed by engineer- in- charge. Make: Leoni, Lapp, Reputed

Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(confoOne Running Metering to IS 14930 II ) with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground / road surface for enclosing cable (A) 50 mm outer dia Make: Tirupati, Reputed

S & F of Male & Female One Pair of MC4 connectors compatible with 4 mm2 DC solar cable. Make: Staubli, Reputed

Providing and erecting required size Copper strip for earthing of H.T. OCB / ACB/ TransfoOne Running Meterer, LT panel board, Motors etc. using copper clamp

M & L for spike type Lightning Arrestor with 3 air teOne Running Meterinals complete with all accessories as specified and directed by engineer-in-charge.

Rajrath Construction

M/S. V.S.KOTADIA

M/s Rajguru Construction