ARM of electrical installation of residential building MMC I

exhaust fan Conforming to IS 2312 -1967.

Metallic louvred shutter suitable for 300 mm sizes exhaust fan.

Metallic louvred shutter suitable for 380 mm sizes exhaust fan.

18- 22 watt LED surface mounted Batten light.

40 watt LED surface mounted Batten light.

5-7 watt LED Recessed orsurface Down lighter.

12 -15 watt LED Recessed or surface Down lighter.

18 watt LED Recessed or surface Down lighter.

LED Batten Emergency

Inverter

luminaire minimum system lumen output of 2000 lumen.

Utility knife Tapaia UK-3

Spare Blade UB-10 for utility knife UK-3 Taparia

Flexible connection pipe 450mm Long

metal braided Hoses .

Measuring Tape

Length of the Tape is 30 M. The width of the Blade is 13mm.

Casing Capping clip

PVC Nail Clip 20 mm Double Nail.

Aluminium Paint .

Red Oxide Metal Primer.

Paint Thinner.

Paint Brush 2 inch

Paint Brush 3 inch

Wooden Screw 35 x 8

Wooden Screw 50 x 8

Dry wall Gypsum Screw 0.75 inch

Dry wall Gypsum Screw 1inch

Dry wall Gypsum Screw 1.5 inch

10 Amp

12 way

PVC Strip Connector.

15 Amp

Iron drill bit Set having 25 Pcs .

Self supported FRP Platform Step Ladder

Multifunction Testers .

400 Amp 04 Pole Power contactor.

16 Sq mm Aluminium Flat thimble

25 Sq mm Aluminium Flat thimble

50 Sq mm Aluminium Flat thimble

70 Sq mm Aluminium Flat thimble

95 Sq mm Aluminium Flat thimble

120 sq mm Aluminium Flat thimble

150 Sqmm Aluminium Flat thimble

185 Sq mm Aluminium Flat thimble

240 Sq mm Aluminium Flat thimble

300 Sq mm Aluminium Flat thimble

400 Sq mm Aluminium Flat thimble

16 Sq mm Aluminium Ferrule

25 Sq mm Aluminium Ferrule

35 Sq mm Aluminium Ferrule

50 Sq mm Aluminium Ferrule

70 Sq mm Aluminium Ferrule

70 watt Flood Light

powder coated pressure die cast aluminium body with driver .

150 watt Flood Light

powder coated pressure die cast aluminium body with driver.

45 watt Street light LED fixture powder coated pressure die cast aluminium body with driver .

72 watt Street light LED fixture powder coated pressure die cast aluminium body with driver.

90 watt Street light LED fixture powder coated pressure die cast aluminium body with driver.

150 watt Street light LED fixture powder coated pressure die cast aluminium body with driver as per the requirement with Driver.

10 to 11 Watt

0.6 Metre nominal size LED Bollard Light fitting complete with LED module.

25-watt LED-based post-top luminaire

IP 65

with Die-cast aluminium spigot housing

complete with diffuser

LED module

driver with surge protection .

10 Watt to 12 Watt Spike LED light with aluminium housing

IP66 having tiltable feature to throw light in the desired direction.

Straight through cable jointing kit with heat shrinkable kit with ferrules for 1.1 KV grade cable. Size 2 X 16 sq. mm sq. mm 1.1 KV grade cable.

Straight through cable jointing kit with heat shrinkable kit with ferrules for 1.1 KV grade cable. Size 2 X 25 sq. mm sq. mm 1.1 KV grade cable.

Straight through cable jointing kit with heat shrinkable kit with ferrules for 1.1 KV grade cable. Size 3.5 X 35 sq. mm sq. mm 1.1 KV grade cable.

Straight through cable jointing kit with heat shrinkable kit with ferrules for 1.1 KV grade cable. Size 3.5 X 300 sq. mm 1.1 KV grade cable.

Cable Junction Boxes

IP 66 weather proof

size 205 mm x 255 mm x 112 mm

with terminals suitable for 16 sq mm cable.

4 Inch Cutting Wheel for Metal suitable for 4 inch angle grinder.

1.5 Volt Alkaline non- rechargeable

type battery

size- AAA.

1.5 Volt Alkaline non-rechargeable

size- AA.

9 Volts Alkaline non-rechargeable Battery.

23A

12V Alkaline Battery.

LED

10 watt per metre or 120 LED per metre

in various colors

IP65 rating

with adopter.

Supplying of Adapter for LED Rope Light.

LED Rope Light

6 W per Mtr

IP65

Tri-Color. 18 Meter.

Supplying Pidilite WD 40 mechinical contact cleaner in 500 ml can with Straw Spray.

2 x 16 sq mm aluminium conductor

XLPE Insulated

PVC sheathed

armoured power cable of 1.1 kV grade

confirming to IS 7098 Part 1 1988 with upto Date Amendments.

2 x 25 sq mm aluminium conductor

3.5 x 35 sq. mm aluminium conductor

confirming to IS 7098 Part 1 1988 with up to Date Amendments.

3.5 x 120 sq. mm aluminium conductor

3.5 x 400 sq. mm aluminium conductor

Socket tester to verify that the wall socket is correctly wired and to check for common faults.

M-Seal - Regular epoxy compound.

Pu Foam Insulation Sealant 750 ml

Distilled Water

5 Liters .

Weatherproof

IP66

wire connector with plug and socket suitable for 4 sq mm copper cable.

Digital Earth ResistanceTester.

PVC Weatherproof

8 module MCB DB with DIN rail.

Wall-Mounted Voltage Stabilizer

Suitable for 1.5 Ton Split Air Conditioner.

Suitable for 2 Ton Split Air Conditioner.

Blue Plastic Crate

4 Litre Capacity

Size 300 x 200 x 100 mm

suitable for material storage.

PVC Weatherproof Switch Box

IP66 Rated.

A Power adaptor with in built RCD 30 ma

Robustt Caution Tape 3 Inches x 130 Mt

Pack of 1

White and Red PVC Material

Barrication tape.

Polypropylene Floor Standing Caution Sign Board

Stainless Steel Clip for fixing LED batten as per sample provided by department.

Waterproof Paint Marke.

15A insulated test lead cable with dual-ended insulated crocodile clips

suitable for electrical testing. Set of 5 Pc.

Plastic Step Stool

Nominal Dimensions Width 57 cm

Depth 54 cm

Height 60 cm.

30W 220V Round Corded Soldering Iron with LED Worklight . 6 Months Warranty.

Solder Paste Flux Pack -50 gm

Lead-Free Soldering Wire

0.8 mm diameter

suitable for electronic and electrical soldering and component repair. 20-gram pack.

Cleaning Cloth Towels

Material 100 percent cotton.

Microfiber Multi-Purpose Cleaning Wipe.

Contactless Surface Temperature Detector.

PVC Plastic Pipe Cutter

Cutting Capacity Up to 42 mm

HSS Bi-metal Holesaw Set

20 TO 64 mm diameter hole saw sizes 20

25

32

38

51

and 64 mm.

Plastic Tool Box with Organizer

Height 150 mm

width 190 mm

length 335 mm

High carbon steel Shovel with Wooden Handle.

Hoe Powrahs

High Tempered Iron Pickaxe

Aluminium Self Supporting Type Tower Ladder Extendable PVC Pendent Holder

One way. Bed switch

240 v

50 Hz

Single pole 10 amps

two way switch

ISI marked. Modular type

Modular Bell Push Switch. Modular type

Modular blanking plate

Single pole 25 amps

one way modular switch

ISI marked.

2 module

Modular base & cover plate

3 module

4 module

6 module

12 module

Flame - Retardant

PVC Electrical insulation Tapes 6 mtr X 1.8 cm long

PVC gitti/PVC rawal plug/PVC fastener 38/40mm long/PVC fastener 38/40mm long

3 mm thick phenolic laminated

1.5 Sq. mm. FRLS/HFFR single core

multi strand copper conductor

PVC insulated cable suitable upto 1100 volts

4 Sq. mm. FRLS/HFFR single core

6.0 Sq. mm. FRLS/HFFR single core

Modular MCB single pole 25 Amp “C” curve

3 kA breaking capacity.

Pin Anchor Fastener 6 x 50

Pin Anchor Fastener 8 x 50

Pin Anchor Fastener 8 x 75

Pin Anchor Fastener 10 x 100

Ring Hook Fastener M-8

Ring Hook Fastener M-10

Wedge Anchor Fastener 8 mm x 75 mm

3 mm thick PVC phenolic laminated round sheet cover minimum170 mm dia for fan box.

3 mm thick PVC phenolic laminated round sheet cover 100 mm dia.

PVC Surface Modular box

BEE 5 star rating

25 litres capacity water storage heater

with protection against over heating

Multifunction Safety Valve and external adjustable thermostat

with 16 A

plug top with in-built 30 mA RCD and 02 nos flexible connection pipe suitable for working with 230V AC

1 Phase supply etc as required. (with 7 year warranty on inner tank

3 year warranty on heating element

2 year comprehensive Warranty)

1200 mm sweep

BEE 5 star rated

ceiling fan with Brush Less Direct Current (BLDC) Motor

class of insulation B

3 nos. blades

down rod upto 30 cm long

2 nos. canopies

shackle kit

safety rope

copper winding

Power Factor not less than 0.9

Service Value (CMM/W) minimum 8.00

Air delivery minimum 215 CMM

350 RPM (tolerance as per IS 374-2019)

THD less than 10%

without remote and compatible with existing step electronic regulator unit for speed control and all remaining accessories including safety pin

nut bolts

washers

temperature rise 75 degree C (max.)

insulation resistance more than 2 mega ohm

suitable for 230 V

single phase AC Supply. The firm has to submit a type test report of the ceiling fan from a NABL accredited lab before commencement of supply. (BLDC Ceiling fan with minimum 2 years Warranty)

Supply of 400 MM

Single phase wall mounting fan

Fresh air fan with louver shutter 250 mm sweep.

230 mm sweep

1400 RPM

single phase

metallic exhaust fan Conforming to IS:2312 -1967.

18- 22 watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%

Operating voltage AC 140-270 Volt

frequency 50/60 hz

Operating temp range -5 °C to 40 °C

internal surge protection of 2.5 KV with Short & Open circuit protection

THD < 10%

P. F. ≥ 0.95

IP20

CRI ≥ 80

Flicker free (flicker should be below 5 %)

life time (LED

Driver & electrical circuitry)

of minimum 50000 Burning Hours with

70% of initial Lumen maintained till life ends

CCT 3000°K 4000°K/5700°K/6500°K (As per ANSI Bin)

SDCM(Standard Deviation Color Matching) <3

Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on housing. with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement.

40 watt LED surface mounted Batten light of following body material and construction as per IS : 10322 with driver (Replaceable) as per the requirement with Driver efficiency >85%

CCT 3000°K/4000°K/5700°K/6500°K (As per ANSI Bin)

Maximum power consumption should not more than the specified rating and Fixture shall be of relevant BIS standard. Manufactures Word Mark/Name Engraved Embossing/Screen printing on housing. with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in- Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C). Powder coated die cast/Extruded aluminium Body (Thickness ≥ 1.20 mm)

5-7 watt LED Recessed/surface Down lighter (Round/square Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%

P. F.≥0.95

CRI ≥80

UGR (Unified Glare Rating) ≤ 19 Flicker free (flicker should be below 5 %)

of minimum 50000 Burning Hours with 70% of initial Lumen maintained till life ends

as per LM80 extrapolation IES TM- 21-11 report

SDCM (Standard Deviation Color Matching) <3

Maximum power consumption should not more than the specified rating and Fixture shall be to relevant BIS standard. Manufactures Word Mark/Name Engraved Embossing/Screen printing on housing. Complete in all respect with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast/Extruded aluminium Body including trim.

12 -15 watt LED Recessed/surface Down lighter (Round/square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%

of minimum 50000 Burning Hours with 70% of

as per LM80 extrapolation IES TM-21-11 report

CCT 3000°K/4000°K 5700°K/6500°K (As per ANSI Bin)

Maximum power consumption should not more than the specified rating and Fixture shall be to relevant BIS standard. Manufactures Word Mark/Name Engraved/Embossing/Screen printing on housing. Complete in all respect with Minimum 5 year OEM warranty. System lumen efficacy ≥120 <135 lm/Watt output. LM79 & LM80 Test report and all testing required for LED fixtures as per BIS shall be submitted. Shape size and CCT shall be as approved by Engineer-in-Charge as per requirement. (Thermal management: heat sink of aluminium housing such that LED junction temperature shall not rise above 90°C) Powder coated die cast/Extruded aluminium Body including trim.

18 watt LED Recessed/surface Down lighter (Round/square/Rectangular) SMD type of following body material with PMMA and prismatic diffuser and construction as per IS : 10322 with driver as per the requirement with Driver efficiency >85%

LED Batten Emergency (Inverter) luminaire

1100 mm (nominal size)

with a minimum system lumen output of 2000 lumen and a minimum system luminous efficacy of 100 lm/W

with built-in Li-ion rechargeable battery

suitable for operation on a 140-270V

1Φ

50Hz AC supply system

complete with all accessories

electronic driver

diffuser etc.

as required.

metal braided Hoses with steel/Brass Nuts & Rubber Washers suitable Geyser.

Length of the Tape is 30 M. The width of the Blade is 13mm

PVC Nail Clip 20 mm (Double Nail)

Red Oxide Metal Primer

Paint Thinner (General Purpose)

Paint Brush 2"

Paint Brush 3"

Wooden Screw 35 x 8 mm

Wooden Screw 50 x 8 mm

Dry wall/Gypsum Screw 3/4"

Dry wall Gypsum Screw 1"

Dry wall/Gypsum Screw 1½"

Iron drill bit Set having 25 Pcs (PRO Metal HSS-G Twist Drill Bit Set 2607019446 of Bosch make

Self- supported FRP Platform Step Ladder with the following specifications: • Fully extended height: 10 feet • Minimum platform size: 300 mm (Length) × 250 mm (Width) • Anti-