REPAIR MAINTENANCE OF BARRACKS SHEDS AND OTHER TEMP ACCN UNDER BR II UNDER GE NW NOFRA

Amount

Taking down cement plaster, any description on brick or stone walls and ceiling including racking of joints hacking for key scrubbing down with water etc for storey upto GF to sixth floor incl all necessary scaffolding etc.

M&L for 20mm thick plastering in cement & sand mortar 1:4 in 2 coats (15 mm thick backing coat and 5 mm thick setting coat mixed with water proofing compound) on fair faces of brick work or stone masonary surfaces, finished even and smooth (w/o using extra cement) all as specified and directed (WPC shall be mesured and paid seperately) incl all necessary scaffolding etc complete.

M&L for 15mm thick plastering in cement & sand mortar 1:6 on fair faces of brick work or stone masonary surfaces, finished even and smooth (w/o using extra cement) all as specified and directed incl all necessary scaffolding etc complete.

Preparation of new plastered surfaces of walls/Ceiling and applying two coats of acrylic emulsion exterior grade (100%) over a coat of primer incl all necessary scaffolding etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of wall and applying two coats of oil bound distemper over a coat of primer over a coat of 1 to 2 mm thick wall care putty (JK/Birla) all as specified and directed.

Supply only integral water proofing compound

Material & labour for complete removal of existing treatment on walls including washing down, rubbing down and applying 2 coats of Acrylic emulsion exterior paint of required shade : (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm)

Dismantling wrought iron or mild steel work of any description not otherwise provided for.

S& F for Framed work such as grills,angle iron, posts, pipe sections, railings etc. with ends of bars shouldered and/or riveted, or forged into spikes; door shutters with gusset plates, braces, etc., to be prepared for hanging or sliding with and including eitherr hooks and hinges or steel hanging door fittings and similar work con- forming to Fe.290.Gde-E-165 at any height including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

M&L for 1.25 mm thick mild steel, plain, black sheet as in steel door shutters cut to size and welding to angle iron framework in repairs complete all as specified.

M&L for preparation of new steel surfaces of any description and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified incl all necessary scaffolding etc.

M&L for preparation of old steel surfaces of any description and applying one coat of synthetic enamel paint complete all as specified incl all necessary scaffolding etc.

S & F in repair for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

S&F in repair for pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550Mpa as in roof covering/ cladding to wall, fixed with self tapping screws in repair, complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 (40mm graded stone aggregate) as in flooring finished with even and fair without using extra cement incl necessary formwork and demolition of old concrete

M &L for 80 mm thick M-40 Grade interlocking paver block machine pressed of any size, shape and colour as approved by GE incl 50mm sand cushion and demolition of old paver blocks as directed by Engineer-in-Charge.

Demolition of brick work/ stone masonary built cement mortar

M&L Brick work with subclass 'B' bricks, straight or curved on plan exc 6m mean radius built in cement mortar 1:6 complete all as specified and as directed by Engineer-in-Charge.

Dismantling stone slabs of any description or thickness in floors laid bedded and pointed in any mortar, complete all as specified.

M&L for Polished granite stone slab 20mm thick (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platform and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture pigment to match with shade of granite including moulding at front edge all as specified and as directed as in platforms Note : Quality of granite all as approved by GE .

Dismantling floor, hearth or wall tiling including cement mortar bedding ( but not backing), removing serviceable tiles to store and disposing the rubbish to the out side of MD land

M&L for DGVT vitrified ceramic tiles light shade 10mm thick (square/rectangular) area of each tiles not exceeding 0.36 sqm including over 15mm thick Screed bed or bedding layer in CM 1:6 for laying floor finishes, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engineer-in-Charge Make: Somany, Kajaria, Orient bell.

M & L for DGVT vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished area of each tiles not exceeding 0.36 sqm but as on veretical surfaces such as skirting /dado including 10mm thick backing layer of CM 1:4 for laying floor finishes on vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed by the Engineer-in-Charge

M&L for Non skid coloured ceramic tiles 7 to 8 mm thick(square/Rectanglar) area of each tiles exc 0.11 Sqm but n exc 0.18 Sqm in floor including 20mm thick screed bed or bedding layer for laying floor finishes in CM 1:6 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M&L for coloured glazed ceramic tiles 450x300x7 / 350x250 x7 mm mm thick but as on vertical surfaces such as skirting/dado including 15 to 20mm thick backing coat in CM 1:4 etc set and jointed in neat cement slurry and pointed in white or coloured cement to match.

M & L for false ceiling made out of 600 X 600 x4 to 6mm thick ceilling board/ tiles deep panel suspensor system made out of powder coated GI sheet main tee of size 23.50x40x23.50x0.63mm and angle size 19x19x0.63mm including 3mm GI wire for suspending bolts necessary washers nut/ clits/pin hook etc. for securing frame work to ceililng to the snap grid all as directed by Engr-in-Charge including provn of necessary holes/ cuttings for providing light/ fan as required including making necessary recesses/ projected pattern complete all as specified and as directed. Make- Armstrong/ Chanakya/ Everest.

S&F roof tiles, Mangalore pattern, interlocking at side joints, laid dry including dismatling of tiles

M&L for preparation of old wall surfaces and applying two coats of oil emulsion distemper complete all as specified and directed.

M&L preparation of old distempered surfaces of walls and applying one coat of oil emulsion distemper on walls etc all as specified.

M&L for preparation of old plastered surfaces of ceiling and applying one coat of oil emulsion distemper on ceiling .

M&L for preparation of old painted wooden surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as speciified.

Taking down chowkats or frames exc 1.5 sqm but n.exc 4.00 sqm each but with shutters (without taking off shutters from the frame)

Taking down shutters of any description exc 1 sqm and n exc 2 sq.m each

Taking down chowkats or frames N.exc 1.5 sqm each with shutters (without taking off shutters from the frame) , complete all as directed.

S&F 40mm thickness Flush shutters, solid core construction, with particle board core, commercial type on both sides and both faces is covered with decorative face veneer with lipping / frame work to match, complete all as specified.

S&F 35mm thick 2nd class HW rail & stile plain framed , panelled shutter ( two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 ( Part I), kiln seasoned and chemically pressure treated

S&F 30mm thick 2nd class hardwood glazed and skeleton shutters open rebated and prepared to receive glass, gauze, etc. divided in to squares,with plain, chamfered or rounded , mitred and rebated sash bars,any numbers ; edges of framing plain, chamfered or rounded , fitted with cut and mitred beads for securing glass, etc., sizes of members of shutters as specified in SSR Part I, Section 8 clause 8.24 (b) ; supplied and fitted to chowkhats of Second class hard wood.

M&L for preparation of newly wooden surfaes of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer incl preparation of surfaces.

S&F aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples all as specified and directed.

S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, in opening as per specifiecation and drawings.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tubes for top & bottom rails MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width struck inside with solvent cement forstyle and plain colour PVC sheets for top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the styles & rails with suitable PVC sheet beading and jointed together with solvent cement supply & fixing in the frame at site. complete all as specified

S&Fin repair powder coated (colour of coating as directed) aluminium (minimum 25 micron thickness of coating) of various section as required/suitable for doors, window & partion/Ventilator (sliding /or openable type)etc including fixing and making the frames hinges to receive glass/wire gauge etc. Complete incl all fittings like jointing cleats, glazing clips, rubber neoprene packing. anodised aluminium snap beading screws etc. rubber beading, clips locking arrangement, handle, sealant etc all as specified and as directed.

S&F 300 mm long aluminium alloy, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet cast or extruded section and fixing bolts and sliding bolts all as specified.

S&F for aluminium anodized barrel tower bolts 200 mm of extruded section and fixed.

S&F for aluminium anodized barrel tower bolts 150 mm of extruded section and fixed.

S&F 150 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.

S&F 100 mm size aluminium alloy handles, cast type anodised, ISI marked all as specified.

S&F butt hinges 100 mm mild steel hinges medium weight and fixed.

S&F butt hinges 75 mm mild steel hinges medium weight and fixed.

M & L for MS flat for hold fast. Conforming to Fe-310-0 or Fe-410-0

S&F 150 mm long floor door stopper of aluminium door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring all as specified

S&F 125 mm long hasp and staple safety type aluminium anodised with mild steel hinge pin including bolt to hinge plate and fixed with screws

Hacking out old broken glass (any thickness, size, quality or description) from iron frames glazed with putty or wooden beads complete all as specified. ( Work carried out upto 16th floor of building either from inside or from outside)

S&F 3 mm thick sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 Sqm in each pane all as directed.

S&F 3mm thick sheet glass froasted or obscured one side and glazing with oil putty or wooden beads in square area n.exc 0.5 Sqm in each pane complete.( Work carried out upto 16th floor of building either from inside or from outside)

S&F in repairs aluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with aluminium wire staples incl wooden beading all as specified and directed.

S&F GI tubing medium grade with all fittings like Tee, bend, elbow etc, 15 mm bore fixed to walls or ceilings with saddles/spacers , clips .,including taking down existing GI water tubing complete with all fittings of 15 mm bore, complete all as specified. ( Rates includind of scaffolding upto 16th floor)

All as per Ser item No. 58 above but 20mm bore of pipe

Taking down & Refixing 15mm old steel tubing and connections in new or old position (Walls, ceiling,floors, etc.), complete all as specified. ( Rates incl of scaffolding upto 16th floor)

All as per Ser item No. 60 above but 20mm bore of pipe

S&F 20mm bore of CPVC pipes having thermal stability for hot & cold water supply including all plain and brass threded fittings fixed of required sizes including with all fittings and fixed to wall /ceilings with suitable clamps, laid in floor or concealed of 20mm size (in high rise building (upto 16th floor)including scaffolding) and incl. taking down old tubes of any desc. complete all as specified and directed by Engineer-in-Charge. Make: Finolex / Prince/ Astral

S&F in repairs vitreous china wash down water closet pan white (pedestal pattern) including plastic sheet cover with nuts and bolts etc all as specified and directed. (Make -Cera/Jaquar/ Hindware / Parryware)

S&F in repairs water closet squattin pan (Orissa pattern) 580x440mm, white with integral foot rests including connecting to trap and to flushing pipe antisyphonage pipe including making good to floor (excluding flushing cistern and flush pipe).

S&F vitreous china wash hand basin flat back of size 550x400mm including bracket, brass chromium plated waste coupling of 32 mm bore and pillar tap 15mm bore dia fancy type complete as fixed in repair.

S&F 10 ltr capacity PVC syphonic action type flushing cistern low level white with inlet, ball valve, float and handle including connetion to pipe but fixed in repair complete all as specified.

S&F in repairs CP bib cock 15 mm bore complete all as specified and directed. Make : ESSCO /Jaquar / Marc / Prayag

S&F in repairs fancy type CP Pillar taps 15 mm bore all as specified and directed . Make : ESSCO /Jaquar / Marc / Prayag

S&F in repairs CP angular stop cock 15 mm bore all as specified and directed. Make : ESSCO /Jaquar / Marc / Prayag

Dismantling water tank of capacity exc. 250 Ltrs but n.exc. 500 ltrs.

S&F rotational moulded polythylene water storage loft tank tank of 300 ltr capacity hoisted including 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for inron pipe and fixed (minimum weight 210 grms ) all as specified in SSR Part I.

S&F in repairs PVC modular section 20mm thick as in profile including 'C' channels, aluminium all around the profile all as specified.

S&F in repairs 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed (minimum weight 210 grms) all as specified and directed.

S&F 2nd class hard wood (sal) plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints all as specified.

M&L for PCC 1:2:4 (20mm graded stone aggregate) as in copings, bed blocks, bed plates etc all as specified.

SHRI SAI ENTERPRISES

B P ENTERPRISES

Angrahit Services Trading Co

satguruenterprises

BOB ENTERPRISES

Unitech Enterprises

ASHOK CONSTRUCTION

SHREE JAGDISH FURNITURE CO.