MTPS I M I Circle CA FP Replacement of wornout punctured Headers pipelines in Hydrant Emulsifyre system Service water and Auxiliary Cooling water system etc

Amount

Charges for removing and assembling the RCC slab in hydrant system underground pipe line trench for attending of water leak.

Charges for excavation of earth work in the underground pipe line.

Charges for refilling the excavated soil after completion of work.

Charges for dismantling of 300NB worn out M.S ERW pipe by cutting etc.,

Charges for Erection, laying, cutting and welding of 300NB M.S ERW Pipeline.

Charges for dismantling of 200 mm dia damaged M.S ERW pipe by cutting etc.,

Charges for erection of 200 mm dia M.S ERW pipe by cutting and welding etc.,

Charges for dismantling of 150 NB damaged M.S ERW pipe by cutting & welding.

Charges for erection of 150 NB dia New M.S ERW pipe by cutting & welding.

Charges for dismantling of 80/100 NB dia damaged M.S ERW pipe by cutting & welding.

Charges for erection of new M.S ERW 80NB/100NB pipe by cutting & welding.

Charges for cutting, grinding, cleaning and welding of 150 /100/ 80 NB bend, flange and fabricated reducers with new erected M.S ERW pipe per Joint.

Charges for cutting, grinding, cleaning and welding of 200 NB bend, flange and fabricated reducers with new erected M.S ERW pipe per Joint.

Charges for fabrication of patch plate size (150mmx100mm x5.4mm thick) for 100NB M.S ERW pipe, cleaning the underground 100NB M.S. ERW pipe punctured area ,Top of pipe opening 200x150mm size by cutting, fixing the patch plate bottom of the pipe (inside) by welding, closing the top of opening by aligning and welding in the existing line.

Charges for fabrication of patch plate size (150mmx100mmx5.4mm thick) for 150NB/200NB M.S ERW pipe, cleaning the underground 150NB/200NB M.S. ERW pipe punctured area ,Top of pipe opening 200x150mm size by cutting, fixing the patch plate bottom of the pipe (inside) by welding, closing the top of opening by aligning and welding in the existing line.

Charges for fabrication of patch plate size (150mmx100mm) 7.01 thick plate by cleaning the punctured 350 NB M.S.ERW pipe, aligning and patch welding work.

Charges for Fabrication of patch plate size (150mmx100mm) 7.01 thick plate by cleaning the punctured 300 NB M.S.ERW pipe, aligning and patch welding work.

Charges for Fabrication of patch plate size (150mm x 100mm) 7.01 thick plate by cleaning the punctured 200 NB M.S.ERW pipe, aligning and patch welding.

Charges for providing and dismantling of scaffolding arrangement up to the height of 8 mtr for pipe line changing work.

Charges for fabrication of new single headed hydrant post out of 80 mm ф M.S ERW pipe 2 metre length and welding with MS bend one side and M.S flanges on both sides.

Charges for replacement of punctured single headed hydrant post along with landing valve by new post with landing valve with new gasket by cleaning the flange surface and wrapping the pipe by tar sheet up to 1 mtr.

Charges for dewatering.

Charges for wrapping of tar sheet on the underground line.

Charges for Painting the fabricated 350/300/200/150/100/80 NB M.S ERW pipe lines with one coat enamel red oxide primer.

Charges for Painting of two coats of enamel red / Bus green paint to the fabricated 350/300/200/150/100/80 NB M.S ERW pipe lines.

Charges for Cutting the existing damaged 350NB MS pipe & lowering the pipe from 13Mtr & 20Mtr elevations to ground floor.

Charges for Providing & dismantling of Scaffolding & Plat form Arrangements around the pipe at 13Mtr & 20mtr height.

Charges for Erection of New 350NB pipe including lifting and rigging to 20 M height by chain pulley block, aligning, arresting, welding work.

Cost of Synthetic Enamel Post Office Red Paint.

Cost of bus Green Enamel paint

Cost of Thinner

Cost of cutting Gas

Cost of Electrodes Welding Rod

Cost of Consumables and T&P

S PANDURANGAN