SPECIAL REPAIR TO WATER PROOFING TREATMENT OF BLDG NO P-110 TO P-119 (WATCH TOWER) OF CERTAIN UNIT AND BLOCK NO 157 ORS MD ACCN, AT NCC OTA KAMPTEE

Amount

Dismantling of asbestos cement (Corrugated, semi corrugated etc.) of any thickness including ridges hips valleys as in roof covering, complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section, in any position , complete all as specified and directed.

Dismantling of timber fillets unframed under 40 Sq cm in section , complete all as specified and directed.

Supplying and fixing mild steel work such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc Fe-410W (Gde-250) quality A, complete all as specified and directed.

Supplying and fixing mild steel screw bolts (machine made) 50mm long, 12mmm dia with hexagonal or square head at one end and screw the other, or screwed bolt ends, each screw end to be fitted with washer and one hexagonal or square nut, not exc. 5cm long, complete all as specified and directed.

Material and labour for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet of on colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw, complete all as specified and directed.

Material and labour for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based plain steel sheet of on colour having tensile strength of 550 MPA as in ridges/valley, fixed with and including self tapping screw, complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets, complete all as specified and directed.

Material and labour for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with raw plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx24mmx0.30mm, cross tee shall be 28mmx24mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick, complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and debris, complete all as specified and directed.

Material and labour Non - skid coloured Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed of cement mortar (1:6), complete all as specified and directed.

Ditto all as per item No. 11 above but, as in skirting with 10mm backing in cement mortar 1:4, complete all as specified and directed.

Material and labour for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc, complete all as specified and directed.

Material & labour for glazed ceramic coloured tiles 300mmx450mm, on vertical surface such as skirting's/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:4 finished even and fair, complete all as specified and directed.

Taking down existing water proofing treatment including PCC padding, Mortar, screed bed and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water , complete all as specified and directed.

M &L Roughening surfaces of old concrete by picking ,sweeping clean and washing down with water to remove dust etc and Brushing neat cement slurry with 3.0kg of cement per sq. metre, complete all as specified and directed.

Material and labour for 40mm thick cement concrete 1:2:4 type B-1 (using 20 mm graded stone aggregate) as in padding , copping using water proofing liquid compound as per manufacturer's instructions laid to proper slope and gradient, finished even and smooth without using extra cement, complete all as specified and directed. Note :- Water proofing liquid compound shall be measured and paid separately.

Material and labour for provision of water proofing treatment by using APP torch on miniral/slate finished membrrance over roof and vertical surfaces including preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sq m on clean and dry surface and then providing APP membrane having non woven. polyster film reinforcement with 3 mm thick and weight not less than 3 .00 kg/sq m and finished on top with mineral/ slate finished torch on system laid with 100 mm & 150 mm over lap on side & end laps resepectely laid over rendering 10 mm thick in CM 1:4 , finished even & smooth without using extra cement using water proofing liquid as per manufacturers instructions. Note- Water proofing liquid will be measured & paid separately.

Supply only liquid integral water proofing admixture , complete all as specified and directed.

Demolition of RCC in suspended work and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed.

Material and labour Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) , complete all as specified and directed.

Material and labour Formwork to Formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide, complete all as specified and directed.

Material and labour RCC 1:2:4 type B1 ( using 20mm graded stone aggregate) for slab supported on walls, beams and coloumns in floors roofs, landings, balconies, canopies, deck slab and in shelves etc, complete all as specified and directed.

Supplying and fixing mild steel TMT bars 10mm dia and over , cut to length, bent to shape required, including cranking bending and binding with mild steel (anneal) wire not less than 0.90mm dia, complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, aprons etc, complete all as specified and directed.

Material and labour for pre-polished Machine cut Kota stone slab flooring 18-25 mm thick over cement screed base 20mm thick in CM 1:4 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab incl rubbing and polishing, complete all as specified and directed.

Material and labour for pre-polished Machine cut Kota stone slab 18-25 mm thick in riser of steps, skirting, dado and pillar 10 mm thick back plaster in CM 1:4 laid and jointed with grey cement slurry mixed with pigments to match the shade of the slab, complete all as specified and directed.

Material and labour for Marble work 18 to 20mm thick (table rubbed and polished) in steps, jambs, pillars, windowcills and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with marble of other than white or black, complete all as specified and directed.

Supplying and fixing pre-polished granite 20mm thick fixed on platform/shelves over 20mm thick screed bed in cement mortar 1:4 including necessary moulding etc, complete all as specified and directed.

Demolition of un-reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 100 m, complete all as specified and directed.

Material & labour 75 mm th PCC (1:3:6) Type C1 (using 20 mm graded stone aggregate), as in plinth protection/path and finishing surfaces even & smooth without using extra cement including mastic filling in the joint, complete all as specified and directed.

Material and labour for cement concrete type D2 1:4:8 (using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and directed.

Material and labour for chequred tiles 300 x 300 x 25 mm thick, rubber finished glossy finish, set jointed and pointed in neat and cement slurry in floors with grey cement and pigment incl screed bed or bedding layer of mortar 15 mm thick for laying floor finishes in cement mortar 1:6, complete all as specified and directed.

Material and labour for 100 mm thick plain cement concrete type B-2 (1:2:4) (Using 40mm graded stone aggregate) in base of hardstanding etc. finished even and smooth without using extra cement etc, complete all as specified and directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m, complete all as specified and directed.

Material and labour for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6, complete all as specified and directed.

Ditto all as per item No. 36 above but half brick wall in CM 1:4, complete all as specified and directed.

Supplying and fixing wire netting of galvanised steel wire 0.71 mm dia and size of mesh is 12 mm fixed in properly with suitable nails for repair of cracks at various locations in wall, beam,chajja, facis, slab, lintel etc including taking down plaster of cracked portion and making good the area by rendering in CM 1:3, complete all as specified and directed.

Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and directed.

Material and labour rendering 15mm thick on brick work or concrete surfaces with CM (1:6) finished even and smooth without using extra cement, complete all as specified and directed.

Rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces finished even and smooth without using extra cement, complete all as specified and directed.

Material and labour for preparation of new plastered surface and applying two coats of oil bound distemper over a coat of cement Primer over 2mm thick wall care putty in two layers , complete all as specified and directed.

Material and labour for complete removal of Existing Treatment and applying two coats of oil bound distemper over a coat of cement Primer over 2mm thick wall care putty in two layers , complete all as specified and directed.

Material and labour for preparation of old plastered surfaces of wall and applying two coats of white wash, complete all as specified and directed.

Material & labour for preparation of newly plastered surfaces of wall & applying two coats of cement base paint over a coat of alkali resistance primer, complete all as specified and directed.

Taking down chowkat or frame with shutter (without taking off shutter from the frame) n.exc. 1.5 sqm each, making good disturbed surfaces and removing materials from site of work, complete all as specified and directed.

Ditto all as per item No.46 above above but of size exc 1.5 Sqm and n.exc 4 Sqm each, complete all as specified and directed.

Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site, complete all as specified and directed.

Material and labour for MS Framed work of Fe-290(Gde E-165)as in doors or gates of angle or other section with gusset plates, rails, braces, MS Plates etc, complete, drilled for fixing of steel sheeting or other covering. doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete etc, complete all as specified and directed.

Supplying and fixing 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides, complete all as specified and directed.

Supply & fixing 30mm thick 2nd class hard wood factory made Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a), kiln seasoned and chemically pressure treated, complete all as specified and directed.

Supplying and fixing of ECO-4000 series pre-coated double rebated openable windows or ventilator made out of galvanised steel colour coated/powder coated (base steel as per IS 513 of 'D' quality galvanised as per IS 277 with zinc of 120gm/Sqm) with total thickness of coating 0.58 microns finished painted with polyster paint12-16mm microns thick and back coated with alkyd backer 5-7 microns thick or powder coated with polyster powder upto 50-60 microns thick outer frame section 72x55mm, centre mullion section 72x50mm, shutter section 47 x 20mm, fly mesh section 40x20mm and the fixed glass beading section 12x12mm outer frame and mullions shall consists rebate for glazed shutter, fly mesh and 20mm provn for guard bars/grills, the section cut to length miter joints with corner brackets, centre mullions fixed with mullion cap, stay handles, latch 2 Nos of heavy duty stainless steel pivot hinges per shutter and panelled with 5mm thick plain float glass and stainless steel(304 grade) mesh for fly mesh shutter fixed with EPDM gasket incl fixing windows with concrete/ stone or brick masonry wall by means of self expanding sleeves and driving MS electroplated 80mm long bolt into the sleeve through frame (minimum 4 Nos fro 1600 mm high windows, 3 nos for 1200mm or less windows and 2 Nos in ventilators), incl 10 mm Square bars welded to 6 x 12mm flat at a distance 125mm c/c etc complete all as per directions of Engr-in-charge. Make :- SECCOLAR of NCL ALLTEK & SECCOLAR Ltd, AP and M/s Ashwani & Sons, Ghaziabad.

Supply and fixing stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with tinned tacks or galvanised wire staples, complete all as specified and directed.

Supplying and fixing 4 mm thick sheet glass ordinary quality, glazing with oil putty and glazing pin and wood bid in square n. exc. 0.5 sqm in each pane, complete all as specified and directed.

Material and labour for Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165, complete all as specified and directed.

Supplying and fixing 200 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate, complete all as specified and directed.

Supplying and fixing Solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with M.S square tube, supplying and fixing in opening, complete all as specified and directed.

Supplying and fixing factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 4mm thick moulded laminated PVC Sheet on the front face & 4mm plain colour PVC sheet on back face, with wood free EPS supplying & fixing in frame at site as per specification & drawing, complete all as specified and directed.

Supply & fixing butt hinges mild steel of 100mm size , complete all as specified and directed.

Supply & fixing 150mm Aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed.

Supply & fixing 125 mm Aluminium handles oval type stove enamelled black, complete all as specified and directed.

Supplying and fixing 250 mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed, complete all as specified and directed.

Supply & fixing in repairs 150mm Aluminium barrel tower bolts, stove enamelled black, with bright bolt and fixed, complete all as specified and directed.

Supply & fixing in repairs 125 mm Aluminium handles oval type stove enamelled black, complete all as specified and directed.

Supplying and fixing in repairs 250 mm Aluminium alloy, anodized, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed, complete all as specified and directed.

Supplying and fixing Steel ventilator with top hung shutter including hinges, steel peg stay, complete all as specified and directed.

Material & labour for preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed.

Material and labour for applying one coat of synthetic enamel paint to old painted wooden surfaces of any description, not oterwise described, over 10 cm width or girth including preparaton of surfaces, complete all as specified and directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described, exc. 10 cm width or girth & applying with two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

Material and labour for preparation of old steel surfaces of any description not otherwise described, exc. 10 cm width or girth & applying with one coats of synthetic enamel paint, complete all as specified and directed.

Cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth in cement mortar 1:3, complete all as specified and directed.

Supplying and fixing GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection, complete all as specified and directed.

Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection, complete all as specified and directed.

Supplying and fixing in repairs vitreous china white squatting pan "Orissa Pttern" size 580x440mm, with integrated foot rest (excluding flushing sistern, flush pipe etc) including making good to floor , complete all as specified and directed.

Supply & fixed in repairs Wash Hand basin ( flat back or angle back )of size 550 X 400 MM white including , waste pipe, chain and plug, porcelain stopper and vitreous china pedestal including for & pinning in ends of brackets including supply & fixing of waste pipe, complete all as specified and directed.

Supplying and fixing in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc, complete all as specified and directed. Make : Prayag Cat No 501

Supplying and fixing in repair bib tap 15 mm dia chromium plated screwd for iron pipe or for brass ferrule and fixed , complete all as specified and directed.

Supplying and fixing in repairs chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe, complete all as specified and directed.

Supplying and fixing Pillar tap 15 mm dia, cast copper alloy, chromium plated screwed down high pressure with or without lettered Hot or Cold with scrwed shanks and fly nuts, screwed for iron pipe and fixed, complete all as specified and directed. make seiko

Supplying and fixing in repair long shank and cup (concealed type) stop valve 15 mm dia Chromium plated fancy type, high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed, complete all as specified and directed.

Supplying and fixing in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut, complete all as specified and directed.

Supplying and fixing in repairs stop valve/ angle cock 15 mm dia screwd for iron pipe or union and fixed Chromium plated fancy type, complete all as specified and directed.

Supplying and fixing in repairs 20mm dia stainless steel curtain rod of approved quality including cutting and fixing to curtain brackets, complete all as specified and directed.

Supplying and fixing for fancy type curtain brackets of approved quality fixed to wall with screws , complete all as specified and directed.

Supply and fixing Towel Rail 20mm dia of Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats, complete all as specified and directed.

Supplying and fixing in repair 100 mm dia PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed.

Supplying and fixing in repair sinks with drainage board made of stainless steel thick kitchen or laboratory with plugs,washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm incl waste pipe 32mm dia, complete all as specified and directed.

Supplying and fixing as in repair stainless steel kitchen plate rack of size 75x60x25 cm of minimum thickness 0.8mm including necessary drilling, fixing with screw, plugs in kitchen etc , complete all as specified and directed. Make : Nirali/Prayag

Supplying and fixing waste fitting, 32 mm brass, chromium plated for basin, etc with long screwd shank and fly nut, complete all as specified and directed.

Supplying and fixing waste fitting, 40mm brass, chromium plated for sink, etc with long screwd shank and fly nut , complete all as specified and directed.

Supplying and fixing in repairs 40mm bore of pipe low density polyethylene pipe (LDPE) of pressure rating 6kg/cm fixed, complete all as specified and directed.

Supplying and fixing PVC (SWR) floor trap, plain with grating including jointing 75mm , setting and jointing with solvent cement, complete all as specified and directed.

Supplying and fixing in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls with stack clamp every one meter apart, complete all as specified and directed.

Dismantling water tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description, complete all as specified and directed.

Supplying and fixing 500 ltrs capacity Rotational moulded multi layer polyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including float valve 20 mm PTMT connections, complete all as specified and directed.

Dismantling boarding, any description, fixed in any position with nails, complete all as specified and directed.

Supplying and fixing Plywood board, 19mm medium density, flat pressed single layer type or threelayer type with BWR type adhesive, fixed with screws to frame, complete all as specified and directed.

Supplying and fixing Prelaminated particle board, interior grade prelaminated both side decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work, including 1st class HW fillet, complete all as specified and directed.

Material and labour for Supplying and fixing Continuous (piano) hinges, width of flap 38 mm (when open) , brass, bright finish, complete all as specified and directed.

Material and labour cutting out cracks to V-section in existing roofs or terracing, cleaning out, wetting, grouting with cement and sand slurry 1:3 etc, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for in any position complete all as specified and directed.

Supplying and fixing Mild steel angles, including embeding in concrete and screwing etc. including securing bolts; posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165, complete all as specified and directed.

Supplying and fixing 2 mm thick fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc., complete all as specified and directed.

Material and labour for cutting holes in brick walls built in cement mortar or cement lime mortar and stone walls built in lime mortar exc half brick but not exc one brick inserting holdfasts and making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B1 as required, complete all as specified and directed.

Taking down point wiring with aluminium conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to macth with existing surfaces including white washing/colour washing/ distempering to match with existing wall/floor/ceiling finishes, complete all as specified and directed.

Taking down sheet metal enclosure, DB & MCBs main switch etc and making good distrubed sufaces to match with exisiting surfaces, complete all as specified and directed.

Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed sufaces to match with the existing surfaces, complete all as specified and directed.

Material and labour for point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed on surface of wall/ceiling including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm modular boxes sunk on wall for mounting of any type modular switches, switch sockets, fan regulator etc including modular cover with frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch, complete all as specifed and directed. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate. All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly.

Ditto all as per item Sl No 108 above but One ceiling/exhaust fan point controlled by oneway switch and regulator, complete all as specified and directed.

Ditto all as per item Sl No 108 above but One 3 pin 5 amp socket outlet point on the same board with other switches, complete all as specified and directed.

Ditto all as per item Sl No 108 above but One 3 pin 5 amps socket out let point on independent board, complete all as specified and directed.

Ditto all as per item Sl No 108 above but One bell/buzzer point controlled by one bell push, complete all as specified and directed.

Ditto all as per item Sl No 108 above but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm for 15 amps power point, complete all as specified and directed.

Material and labour for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed in wall of the size 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm, complete all as specified and directed. PVC Conduit Make : Polycab,Modiplastr, Finolex. Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same Make.

Supply and fixing for switch modular type single pole one way 6 amp 1 module 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

Supply and fixing for socket modular type single pole one way 6 amp 2 module 2/3 pin 250 volts AC suitable for modular switchboxes, complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

Supply and fixing for switch modular type single pole one way 6/16 amp 3 pin 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

Supply and fixing for socket modular type single pole one way 6/16 amp 2/3 pin 2 module, 250 volts AC suitable for modular switch boxes, complete all as specified and directed. Make: Anchor / Roma/ legrand/ Crabtree.

Supply and fixing ceiling rose, surface type, three terminals 5 amps, complete all as specified and directed.

Supply and fixing Electric Bell Ding dong AC 230 volts, single phase, complete all as specified and directed.

Supply and fixing bell push switch modular type single pole one way 5 amp 240 volts, complete all as specified and directed. Make: Anchor / Roma/ legrand/ Crabtree.

Supply and fixing 0-4 step -2 module modular type electronic regulators for ceiling fan 1200/1400 mm sweep, 240 volts, 120 watts single pole complete all as specified and directed. Make: Anchor/ Roma/ legrand/ Crabtree.

Supplying and fixing 18-22 Watt LED Tube light fittings complete with aluminum body including tube rod, driver with not less than 2000 Lumen O/P and I/p rated voltage 240V connecting with 3 core 1 sqmm copper conductor cable complete all as specified and directed. Make & Model:- Philips Astra Line CG LDC-20-CDL/ Philips/ Wipro/ Surya

Supply and fix lamp holder insulated body with back plate for angle/ batten fitting complete all as specified and directed.

Supply and fixing LED light fitting 10W bulk head luminaries with lamp holders etc complete with all accessories and including connecting upto with twin core twisted flexible cable suitable size of 230V, 50Hz complete all as specified and directed. Make: Bajaj Cat Part no BIBWP 10W / LBHP 10 CDL of CG/ Wipro/ Surya/ Philips.

Supply and fix building security light LED 25 W with Lumen O/P 1800 with driver with rated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc. complete all as specified and directed. Make : CG LSTS-25-CDL/ Philips/ Wipro.

Supply and fixing Exhaust fan metallic body 300mm sweep, single phase, 230 Volts, 50Hz, with nut and bolts, washers etc., and connecting up with twin core twisted flexible copper conductor cable of suitable size from fitting to ceiling rose, and making holes complete all as specified and directed. Make: Bajaj/ CG/ Havells.

Supply and Fixing MCCB TPN 40 amps 415 V 50Hz 16ka with enclosure complete all as specified and directed connecting with incomer cable using suitable size lugs as requires and connection to main DB using 10 sqmm X4 FRLSH copper conductor complete all as specified and directed. Make: Legrand/ Siemens/ Schneider.

Supply and fix sheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting, double door, complete all as specified and directed. Make- Legrand/Hegger /L&T.

Supply and fix MCB Triple pole & neutral 240 volt 40 to 63 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Hayger

Supply and fix MCB single pole & neutral 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Hayger

Supply and fix Energy meter enclosure made of bakelite material with fixing of meter and testing, complete all as specified and directed. Make:-Hensel/ Ship/ HPL

Supply and fix MCB single pole 240 volt 6 to 40 amps 10 KA, complete all as specified and directed. Make:-Legrand, L&T, Hayger

Earthing complete with galvanised steet earth plate electrode 600x600x6mm thick burried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr. below the normal ground level connected to galvanised earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanised iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :- (a) Excavation and earth work or drilling hole for electrode in any type of soil (b) PCC pit in cement concrete 1:2:4 TYPE B-1 (c) Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric (d) Funnel with watering pipe of GI 20mm nominal bore light grade and copper lugs etc all as specified. (e) 15mm nominal bore meduim grade GI protec-tion pipe 7.50 metre long for protection of earthing lead. (f) Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion.

NOTE :- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.) [(-) Rs.1,02,461.00/- ]

M/s Jagdish Staioners and General Stores

M/s DS Khekde

M/s B S Jain

NORTH INDIA PEST CONTROL

M/s M.G. Hargunani

M/s Rahul Traders

khushal constructions

Bidder Name

DE PRETTY AND CO

khushal constructions

M/s B S Jain

M/s Rahul Traders

M/s DS Khekde

M/s Jagdish Staioners and General Stores

M/s M.G. Hargunani

NORTH INDIA PEST CONTROL