Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.4 LAccepted-AOC SHANTI KUNJ CHESIRE HOME ROAD BARIATU RANCHI 834009 JHARKHAND | RANCHI | JHARKHAND | 834009 | L1 | Accepted-AOC Being L1 | |
| 2 | L2₹16.1 L+₹1.7 L (11.5%)Rejected-Finance 119 LANE NO 4 DAYA NAND NAGAR LAWRENCE ROAD AMRITSAR PUNJAB 143001 | AMRITSAR | PUNJAB | 143001 | L2 | Rejected-Finance Quoted amount is more than L1 |
Tender Value
₹16.9 L
EMD Value
₹33,800
Closing Date
9 Sept 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
Major S Rakesh
Garrison Engineer Ranchi, 7th Club Road Ranchi, PIN-834001
REPAIR/MAINT TO CENTRIFUGAL/SUBMERSIBLE PUMPING SETS AT 1 I R O FLT LPH AREA UNDER GE RANCHI
2023_MES_612847_1
8400/1191/E8
Open Tender
Civil Works
Item Rate
180 days
Ranchi
Class E Cat a (ii)
6 documents required · 6 mandatory
₹500
GE Ranchi
₹33,800
Yes
3 Nov 2023
9 Aug 2023
11 Sept 2023
10 Aug 2023
9 Sept 2023
22 Aug 2023
Amount
Taking out the submersible motor from bore/open well upto 7.5 HP including GI pipe of 40/50 mm dia complete all as directed and transportation of submersible motor upto 7.5 HP 3 Phase from pump house at any location in LPH Area/R&O Flt/LAO Doranda under AGE E/M , transporting to contractors workshop, dismantling and carrying out necessary repair/replacement of motor including reassembling, testing and commissioning for satisfactory operation as per the following :- (a) Cutting out existing winding of starter of submersible motor of any make and rewinding with same size of copper winding wire as existing as directed by the Engineer-in-Charge. (Note : Cutting of existing copper winding shall be done in front of AGE E/M / JE E/M and rewinding photographs for the same have to be provided ) (b) Straightening the slot of water of submersible motor of any make. (c) Replacement of thrust bearing block complete of submersible motor of any make. (d) Replacement of worm-out bushes of submersible motor as per manufactures design and specification. (e) Replacement of submersible cable 3 Core of suitable size 4 Mtr long complete with suitable clips. (f) Replacement of sand guard. (g) Providing of sleeves in end plate of submersible motor. (h) Replacement of cable gronment. (j) Replacement of water seal. (k) Replacement of studs with nuts. (l) Remetlling of motor shaft, turning to bring it to original size and shape and plastering of shaft of submersible motor. (m) Painting of motor and tranporting it back to site/store yard and testing to the entire satisfaction of Engineer-in-Charge.
Reparing of submersible pump upto 7.5 HP and lowering down of motor pump set with GI pipe and rope all as directed and transportation of submersible pumps from pump house at any location in LPH Area/R&O Flt/LAO Doranda under AGE E/M Yard, transporting to contractors workshop, dismantling and carrying out necessary repairs/replacement of pumps/testing as the following :- (a) Replacement of coupling of submersible motor pump key. (b) Overhauling of submersible pump and carrying out the following repairs. (c) Balancing of pump shaft and cutting of key slots. (d) Minor repairs of bowel assembly. (e) Re-threading of worn-out studs holes and providing over size studs with nuts. (f) Replacement of bowels bushes. (g) Replacement of neck ring. (h) Replacement of steel distance pieces. (j) Replacement of impeller. (k) Replacement of bowel. (l) Replacement of head extension. (m) Painting of pumps and transporting it back to site/store yard and testing to the entire satisfaction of Engineer-in-Charge.
S&F PVC insulated submersible cable water proof flat type 3 core with stranded copper conductor cable, 6 Sqmm, 1100 Volts grade inculding cable lugs/joints, connection to submersible motor and other end to aluminium amoured cable including jointing complete as directed.
All as per Item Srl No. 3 above but of 4 Sqmm, 1100 Volts submersible cable.
S&F HDPE Borecaps of size 250 mm dia complete all as directed.
Replacement of old rusted GI Column Pipe heavy grade of size 50 mm dia flanged type in the bore/open wells complete all as specified and directed.
All as per Item Srl No. 7 above but of 40 mm dia.
S&F of steel rope in submersible bore wells from motor to top edge of the bore well of size 6 mm dia (Multi wire stainless steel) for holding of submersible pump motor set all as directed.
M&L GI flange joints with rubber gasket or 3 mm thick chemically treated compressed including suitable size bolts, nuts and washer complete as directed of size 50 mm dia.
S&F MS work as/or holding MS clamps on tube well for delivery/column pipe, fabricated out of flat iron section as directed, made to shape drilled fixed with 16 mm dia MS bolts, nuts, washers etc including one shop coat of red oxide primer, after preparation of surface complete all as directed.
Flushing/cleaning of bore well including taking out and lowering of new /repaired submersible pump set of any size, 3 Phase 400/415 Volts in 200/250 mm size tube well upto existing depth of bore comprising following nature of work:- (a) Dip connecting existing pipe connection in any size and removing electric connection. (b) Errection of trapord/chain pulley lock at site. (c) Unscrewing the submersible pump and removing the same at site for relowering. (d) Transporting the trolley mounted DTH machine at site for flusing the bore well/further boring if required. (e) Flushing the bore hole through compressor operating 120 PSI after lowering the rig in length 1.5 Mtr x 80 Nos continously till clear water in obtained not less than 8 hrs.
M&L dismantling the power supply of electric motor any type including dismantling from pump and taking to workshop with necessary transportation and opening the complete motor and rewinding the motor with super enameled copper wire as per the existing guage with necessary insulation, sticks and varnishing, including replacement of shaft bearing of shaft and replacement of bearing 02 Nos and motor terminals plate/cable ducts and minor repair of strater complete of capacity 20 HP including two coat of synthetic enamel painting complete all as directed including reassembling, testing and commissioning for satisfactory operation. Note : Cutting of copper winding of motor and rewinding shall be done in front of AGE E/M /JE E/M.
All as per Item Srl No. 13 above but upto capacity 7.5 HP electric motor any type.
M&L dismantling complete Centrifugal/Mono Block Pump set of any type and overhauling the pump re-threading of wor nout holes of studs and providing over size studs with nuts and washers. Remantlling and balancing of shaft, replacement of gun metal bush, all bearing type 6309/6307/6307C etc and gland packing (12/8 mm) of pump set and refitting the same after the repair all as specified capacity 20 HP including two coat of synthetic enamel painting, SM No writings etc complete with base etc all as directed including reassembling, testing and commissioning for satisfactory operation
All as per Item Srl No. 15 above but upto capacity 7.5 HP.
M&L dismantling the power supply of openwell submersible motor pump set of 3 HP capacity including dismantling from existing pipeline and taking to workshop with necessary transportation and opening the complete motor and rewinding the rotor with super enameled copper wire as per the existing guage with necessary insulation, sticks and varnishing, including required repairs including two coat of synthetic enamel painting complete all as directed including reassembling, testing and commissioning for satisfactory operation. Note : Cutting of copper winding of motor and rewinding shall be done in front of AGE E/M /JE E/M.
Supply and fix for in line pressure boosting pump 0.5 HP electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia or 20/25mm dia including necessary electrical connections and GI fittings including removal of old unsv one complete all as specified and as directed. Make – Kirloskar, KSB, Crompton.
M&L Cement concrete (1:4:8) Type D-2 using 40 mm graded stone aggregate as in foundation filling and mass concrete, all as specified and as directed.
Removing excavated material n.exc 50 m and depositing where directed at a level n.exc 1.5m above the starting point, all as specified and as directed.
Excavation in trenches, n.exc. 1.5 m wide and n.exc 1.5m in depth for foundation and getting out in soft/loose soil, all as specified and as directed.
Demolition of cement concrete in ground floors and paving n.exc 15 cm thickness (below or above ground level), all as specified and as directed.
S&F monoblock pump (tullu pump) set 0.5 HP fixing the same on its position/new position electrically operated 240 volts, 50 Hz fixed to 15/20 mm dia or 20/25mm dia including necessary electrical connections and GI fittings including removal of old unsv one complete all as specified and as directed. Make – Kirloskar, KSB, Crompton.
M & L Opening dismentling pump set 0.5 HP and taking out defective motor pump of any capacity from site, transporting to work shop for repair and rewinding with supper enameld copper conductor as per existing size and guage as recommended by OEM including varnishing drying cleaning to slots repair to any damage slot for smooth functioning of motor testing & transporting back at site ofter repair and refixing the same on its position reconnection testing, commissioning complete all as specified and as directed.
M & L opening the pump 0.5 HP assembled with motor trace out the defective parts of the pump melting grinding the shaft by lath machine to make as per original Shape and size and fixing the new parts as required, and refixing the same on its position reconnection testing, commissioning complete all as specified and as directed.
M &L for filling of gland packing in pump side or as directed.
M & L transporting burnt Pressure Booster pump motor upto 2 HP to work shop for opening the elect motor single phase 230 volt and rewinding with supper enameld copper conductor as per existing size and guage including varnishing drying cleaning to slots repair to any damage slot for smooth functioning of motor testing, Opening the pump assembled with motor trace out the defective parts of the pump melting grinding the shaft by lathe machine to make as per original Shape and size and fixing the new parts as required & transporting back at site ofter repair and refixing the same on its position reconnection testing, complete all as specified and as directed.
Supply and replace Direct On Line (DOL) submersible starter 3 phase 415 Volt suitable for 7.5 HP submersible motor overload relay range 6.5 to 20 Amp. Make : Havells/CG/Anchor
S&F in replacement of 3 Ph, Star delta starter panel for capacity 20 HP complete all as specified and directed. Make : Havells/CG/Anchor
S&F in replacement of 3 Ph, Star delta starter panel for capacity 7.5 HP complete all as specified and directed. Make : Havells/CG/Anchor
S&F in replacement of 3 Ph, Star delta starter panel for capacity 3 HP complete all as specified and directed. Make : Havells/CG/Anchor
S&F submersible motor pump set of 415 Volts 3 phase suitable for 200 mm dia borewell with head 200m. 7.5 HP, complete all as specifed and directed. Make: CG/Kirloskar/KSB
S&F submersible motor pump set of 415 Volts 3 phase suitable for 200 mm dia borewell with head 200m. 5 HP, complete all as specifed and directed. Make: CG/Kirloskar/KSB
S&F centrifugal motor pump set of 415 Volts 3 phase 10 HP not less than 100 m head, not less than 25000 L/h discharge, inbetween 1400 to 1500 RPM range including necessary electrical connections, GI fittings and necessary foundation/plinth, PCC, iron angle and fixing with nuts, bolts, complete all as specified and as directed. Make: Crompton/Kirloskar/KSB
S&F MCCB four pole 415 Volt 50 Hz 250 Amp of capacity 25 KA with thermal magnetic release complete with all accessories.
S&F MCCB four pole 415 Volt 50 Hz 400 Amp of capacity 25 KA with thermal magnetic release complete with all accessories.
S&F MCCB four pole 415 Volt 50 Hz 100 Amp of capacity 16 KA with thermal magnetic release complete with all accessories.
S&F MCCB four pole 415 Volt 50 Hz 160 Amp of capacity 36 KA with thermal magnetic release complete with all accessories.
S&F MCCB four pole 415 Volt 50 Hz 63 Amp of capacity 25 KA with thermal magnetic release complete with all accessories.
Dismantling and repair of starter panel/LT panel of centrifugal motors of any capacity complete all as specified and directed. Note : material used/replaced in panel will be measured and paid seperately.
S&F Dry run and over load protection with phase failure relay as per existing (sample) alongwith suitable CTS-01 Set and single phase preventer complete all as specified and directed
S&F Surge protector of suitable rating (as per existing) 3 ph 4 wire base 415 Volts AC complete all as specified and directed
S&F contactor suitable for starter panel as per (sample) existing for motor pump at complete all as specified and directed
S&F Copper bus bar of proper rating in Amps as per existing (Sample) busbar with suitable thickness for fixing in LT Panel in replacement of damaged bus bar complete all as specified and directed
S&F PVC copper cable 4 sqmm 2 core required for connection/fixing in LT/starter panel complete all as specifed and directed.
S&F Current transformer (CT) as per existing (sample) suitable for electrical panel for pump /motor, complete all as specified and directed
S & F Suitable Add-on Auxilary Block for contactor (as per existing sample) (1 No 1 NC)/(2 NO 2 NC)
S&F in replacement of RYB indicator required for LT panel or starter panel for centrifugal/submersible pumps
S & F push buttons (set of green and red) with 2 NO 2 NC three phase suitable for starter panel complete all as specifed and directed.
S&F Electronic adjustable cyclic timer for star delta starter as per existing (sample) complete all as specified and directed
india trading company
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .