REPAIR REPLACEMENT TO CUPBOARDS, TILING, GALVALUME SHEET, SANITARY FITTING AND OTHER MISC BR WORKS IN MARRIED ACCN IN DOMESTIC AREA UNDER GE AF JAMMU

Taking up or down steel tubing for 15mm dia pipe and connections including cleaning for re-fixing or removal to store.all as spd and directed by Engg-in-Charge

Dismantling boarding, any description, fixed in any position with screws.complete all as spd and directed.

S & F 30 mm width of flap Continous (Piano) hinges, mild steel, bright finish or electrogalvanised .complete all as spd and directed.

S & F 140mm ball catches with 8 mm dia steel ball, and brass body and striking plate including letting in complete all as spd and directed.

S &F in repair stainless steel 25mm dia fancy type curtain rods fixed to wall with two no's of bracket,two no's of end ball and funnel including taking down of existing curtain rod.complete all as specified and directed.

Dismantling existing unservicable floor tile of any description including bedding/screed layer.compplete all as specifed and directed.

M&L for colored non skid ceramic tiles 7to 8 mm thick, area of each tile exc 0.11 sqm but n exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in colored cement over and incl 15 mm thick screed bed or bedding layers of cement mortar 1:4 to match Shade, pattern, laying etc of tiles at site.complete all as spd and directed. Note:- the work should be executed in patch work.

Dismantling existing unservicable wall tile of any description including bedding/screed layer and M&L for 300x450 x7 mm thick glazed ceramic tiles colored as in dado/ skirting and vertical surfaces set&jointed in neat cement slurry and pointed in colored cement over and incl 10 mm thick cement mortar 1:4 to match the Shade, pattern, laying etc of tiles.complete all as spd and directed.

S&F in Repair PVC seat cover for EWC white colour complete with MS Hinged cromium plated all as spd and directed by Engg-in-Charge

S&F in repairs 10 ltrs capacity PVC valveless syphonic action type flushing cistern low level with inlet ball valve float and handle complete all as specified .

Supply and fixing in repair fancy type Angle valve cast copper alloy cromium Plated (CP) 15mm dia screwed down high pressure with crutch or butter fly handles screwed both and iron pipe or for unions and fixed.complete all as spd and directed.

S and F in repair 15mm dia Bib taps fancy type,Cromium plated(CP)with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed.complete all as spd and directed.

S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement all as spd and directed by Engg-in-Charge

S&F Shelf of PTMT fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 300 gms).complete all as spd and directed.

S&F soap container of CP fixed with and including Chromium plated brass screws and plastic cleats ( Minimum weight 105 gms).complete all as spd and directed.

S&F in repair 20mm Ball brass valves,high pressure,with polythene float and flynut complete,screwed for iron pipe or brass ferrule and fixed.complete all as spd and directed.

S&F in repair pillar tap fancy type CP screwed down high pressure with or without lettered hot and cold with long screwed shanks and fly nut screwed for Iron pipe and fixed 15mm dia..complete all as spd and directed.

S&F in repair brass spindle (half round) complete for 15mm dia bib tap.complete all as spd and directed.

Supply and fixing

in repair brass spindle complete for 15mm size stop cock.complete all as spd and directed.

S&F in repair 32mm dia waste pipe of PTMT,half or full threaded (minimum weight 45 gms), to WHB complete all as specified and directed by Engr-in-Charge.

S&F in repair 32mm dia waste coupling of Chromium plated,half or full threaded (minimum weight 45 gms), to WHB complete all as specified and directed by Engr-in-Charge.

Disconnecting existing tanks (capacity of tanks. 500 ltr) setting aside (or lowering if required) for repair, cleaning etc and hoisting if required reconnecting and re-fixing in position with existing accessoriess including Cleaning & removing all dirt and scale from tank and also from mouth of pipe completly as directed by Engineer-in charge Note:- Date of cleaning should be mentioned after cleaning of tank.

Discreption all as per Item no 55 above but 1000 Ltrs capacity.complete all as spd and directed.

Supply and fixing in repair Aluminiun anodised barrel tower bolts of extruded section of size 150mm .complete all as spd and directed.

Supply and fixing in repair MS butt hinges medium weight cold rolled 100 mm ISI marked complete all as specified incl required welding etc in repairs.complete all as spd and directed.

Supply and fixing in repair continuous (piano) hinges mild steel bright finish width of flap 40 mm (when open) .complete all as spd and directed..

Supply and fixing in repair door seal 1.5mm thick strip of mild steel with hard brush fixed in door bottom .complete all as spd and directed.

Material and labour for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge.

Taking down cement plaster of any description including racking out joint hacking for key scribing down with water etc.complete all as spd and directed. Note:- including wall tile/mosaic wall tile etc

M&L rendering 5 mm thick in cement plaster 1:3 on ceiling surface finished even and smooth without using extra cement.complete all as spd and directed.

M&L for prepration of new plastered surfaces of ceiling applying three coats of white wash.complete all as spd and directed.

M&L preparation of new plastered surfaces of finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade: New work (Two or more coats applied @1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).complete all as spd and directed.

Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one .complete all as spd and directed..

Supply and fixing in repair stainless steel wire cloth 0.36 mm nominal dia of wire and avg wide 1.40 mm aperture of tinned tacks of galvanised wire staple to steel windows/fixed with wooden beads of 2nd class HW to wooden doors/windows all as spd.complete all as spd and directed.

Repair to leakage water in pillar tap, stop cock, angle valve, bib tap of any description by replacing the washer and other fixing accesorries required and refixing the same in origninal positio.complete all as spd and directed.

Repair /adjustment to washer/siphon etc for high or low level flushing cistern any type any make including replacement of washer, check nuts, plug etc and making it functional complete all as spd and directed.

Demolition of brick work or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars,drains etc, but excluding ashlars facings, dressed stone work and precast concrete articles.complete all as spd and directed.

Dismantling of asbestos cement sheets, corrugated or semi corrugated etc in roof covering.complete all as spd and directed.

Dismentling of wrought iron or mild steel work such as agle iron fencing post and similar type work or any description not other wise provided complete all specified and directed.

M&L Mild Steel sections confirming to FE-410-W as in Framed work as in doors, gates of angles or other section with gusset plates, rails etc including necessary cutting, drilling, welding etc complete all as per directed by Engr- in charge.

M&L for Preparation of new or untreated steel surface of any description exc. 10 cm. in width or girth and applying two coats of synthetic enamel paints, over a coat of red oxide zinc chrome primer, complete all as specified and directed by Engr-in-charge.

SCHEDULE 'A' PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch 'A' Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder.