REPAIR TO DRAIN FOOTPATH CULVERT AND OTHER ALLIED WORKS IN CERTAIN OMQ SMQ AREA UNDER AGE BR II OF GE AF ADM AREA AGRA

Amount

Demolition of cement concrete unreinforced ground floor and paving n.exc 15cm thick below or above GL complete all as specified and directed.

M&L for 100 mm thick cement concrete type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40mm graded stone aggregate) as in sub base complete all as specified and directed.

Dismantling of stone slab and tiles of any description or thickess in any position laid bedded and pointed in any mortor etc complete all as specified and directed.

M&L for machine made precast rubber moulded coloured interlocking tiles/ paver of any shape and size with grey cement and pigment confirming to IS- 15658 of 2006 of 60mm thcik M-35 grade laid, jointed complete all as specified after preperation of formation bed over & including 50 mm thick sand cusion complete all as specified and directed.

M&L for chequred cement concrete tiles of size 250 mm x 250 mm x 22 mm thick with grey cement and pigments, laid & jointed with cement slurry and pointed with grey cement mixed pigments as in floors over & including 15mm screed bed jointed with CM 1:4 complete all as specified and directed.

M&L for PCC 1:3:6 type C-2 (using 40mm graded stone aggregate) 75 mm thick as in path/ plinth protection finishing the surface even and fair complete all as specified and directed.

M&L for PCC type B-1, 1:2:4, (using 20 mm graded stone aggregate) 40 mm thick as in floor, finished the surface even and smooth with using extra cement laid in alternate panels including glass dividing strips 3 mm thick and 38 mm wide complete all as specified & directed.

Demolition of brick work built in cement mortar or cement lime mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class 'B', old size bricks, in full brick thick wall, straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

M&L for plain cement concrete 1:3:6 type D-2 (using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar 1:4 on fair faces of brick work or concrete surfaces on external walls, mixed with water proofing compound (water proofing compound to be measured separately as supply only), finished even & smooth without using extra cement complete all as specified and directed.

M&L for PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) as in coping including necessary formwork if required finishing the exposed surface even & smooth without using extra cement complete all as specified.

Taking down cement plaster of any thickness on walls including racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coats of cement base paint over one coat of primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

Supply only integral water proofing compound Make-PIDILITE/Sikka/Imermo/CICO or equivalent as approved by G.E complete all as specified and directed.

M&L in repair providing precast cement concrete 1:2:4 type B-1 (using 20mm graded stone aggregate) as in cover slab, shelve, bed plates set in CM 1:4, including chamfers, weatherings, throating etc.complete all as specified and directed.

Dismantling of bricks (laid flat or on edge) or brick tiles in floors, channels, kerbs,aprons,etc laid bedded and pointed in any mortar complete all as specified and directed.

M&L for bricks, sub class 'B' laid flat on floors, old size bricks bedded jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.

M&L for bricks, sub class 'B' laid on edge in floors, old size bricks bedded jointed in cement mortar 1:6 and pointed in cement mortar 1:3 complete all as specified and directed.

M&L for flush pointing to brick tiles, bricks laid flat or on edge in CM 1:3 incl racking out joints complete all as specified and directed.

Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and directed.

Returning, filling in soil, including spreading, leveling watering and well ramming in layers not exceeding 25 cm complete all as specified and directed.

Removing excavated material not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified and directed.

S&F for 16-18 mm thick dholpur stone cladding gang saw cut with machine cut edges, uniform colour of each stone size exceeding 0.5 sqm area fixed with and including one number SS clamps (grade - 202) of flat 30mm X 2mm, 150 mm long made to shape in each slab, making V-groove at top and bottom of stone and drilling hole for hold fastener, polishing, rubbing & including silicon treatment over & including 15 mm thick cement plaster in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed.

Dismantling of chain link fencing of any type & size complete all as specified and directed.

S&F chain link fencing of 50 mm x 50 mm x 3 mm and fixed to angle iron posts including line wires, and type to any type of standard, rails, straining bolts, etc & provn of winding wire complete all as specified and directed.

Fixing only chain link fencing including line wires, any mess, size and type to any type of standard, rails, straining bolts, etc including provn of winding wire complete all as specified and directed.

Dismantling structural steel work including doors, gates but excluding framed truss etc complete all as specified and directed.

Dismantling posts or struts (wood, steel or RCC) any section, including taking out embedded portion and making good natural ground disturbed ground complete all as specified and directed.

S&F angle iron posts and struts in fencing including cutting tops to shape as directed, driiling holes, notching for wire, etc, flat iron fillets (for secruing wire mesh etc) including all necessary drilling, bolting or riveting, etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M&L for preparation of new steel surfaces of any description, exc.10 cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed.

M&L one coat of synthetic enamel paint on old steel surfaces of any description,over 10cm in width or girth, not otherwise described including preparation of surfaces complete all as specified and directed.

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends Fe-410w (Gde 250 quality-A or Fe-290 (Gde - E-165) and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

Excavation in post holes (or similar holes) in soft/ loose soil each n. exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm watering and removing surplus soil to a distance n exc 50 m and making good surface complete all as specified and directed.

S&F framed work as in doors or gates of angle or other section with gusset plates,rails braces, etc, conforming to Fe-290 Gde Fe-165 complete, drilled for fixing of steel sheeting or other covering Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging, also fastering and fixing complete all as specified and directed.

M&L for cement concrete in foundations,filling and mass concrete Type C-2 1:3:6 (using 40 mm graded stone aggregate) complete all as specified and directed.

S&F 110 mm bore UPVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and directed.

Demolition and breaking up rain water pipe (PVC, AC, or re-inforced concrete ) of sice 110mm coplete all as specified and directed.

S&F 110mm bore UPVC (SWR) bends any radius coplete all as specified and directed.

M&L for PCC 1:2:4 type B-0 (using 12.50 mm graded stone aggregate) as in machine pressed kerb stones up to 60 CM in height, including weathering, slightly rounded or chamfered angles and throating complete all as specified and directed.

M&L for applying two coats of synthetic enamel paint (yellow,black,& white) on newly plastered/ concrete surface including one coat of primer and preparation of surface complete all as specified and directed.

M&L for applying one coat of synthetic enamel paint (yellow,black,& white) on old concrete surface including preparation of surface complete all as specified and directed.

M&L for PCC (1:4:8) type D-2 (using 40mm graded stone aggregate) as in benching and haunching for drain pipe as specified for 300mm dia pipe complete all as specified.

M&L for 300mm bore reinforced concrete pipes class NP-2 (ISI Marked) laid & jointed complete with coller complete all as specified and directed.

M/s K S Builders

B K Construction Company

HARI BUILDERS

Sethi Brothers

Asha Construction

M/s M S Sharma and Co.

m/s shanti consruction co

SHRI SAINATH ENGINEERS

Abhi Construction

garg construction company