REPAIR OF CERTAIN WOODEN AND STEEL FURNITURE AT OTM/MD ACCN OF 56 ASC SUP UNDER BSO (SOUTH) OF GE (SOUTH) BANGALORE

Amount

BED PLYWOOD TOP WITH MNF SET (Drg No.FD - 246 applicable to item nos. 01 to 05) Removing the existing unserviceable broken wooden long rail and supply of first class hard wood (Teak wood) new long rail of size 35mmx90mmx1980 mm including 35 mm x 5mm flat iron of mild steel bent to right angles as shown on drg and as as directed.

Removing the existing unserviceable broken wooden head board including legs and supply and fix 900x400mm new head board including teak wood legs of size 60mmx60mmx300mm and all as specified and as shown on drgs.

Removing the existing unserviceable /broken foot board including legs and supply and fix 900x300mm new foot board including teak wood legs of size 60mmx60mmx400mm and all as specified/directed and as shown on drg.

Removing the existing unserviceable /broken wooden stiffeners (supporting pieces) and supply and fix first class hard wooden stiffeners of size 40cmx60cm complete all as specified/directed and as shown on drg.

Removing the existing unserviceable plywood and supply and fix 900mmx1800mm x 12mm thick plywood commercial BWR grade bearing ISI marked all as specified/directed and as shown on drg.

TABLE WRITING (Drg No. FD-249, FD-275 (applicable to item nos. 06 to 11) Removing the existing unserviceable broken top and supply and fix new top made out of 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 6mm thick teak wood edging, size 1145mmx600mm all as specified/directed and as shown on drg.

Removing the existing unserviceable/ damaged cupboard shutter and supply and fix new shutter made out of 18 mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, size 400mmx700mm, including piano hinges and brass lock all as specified/directed and as shown on drg.

Removing the existing unserviceable drawer and supply and fix new drawer size 300mmx600mmx75mm, made out of teak wood plank 12 mm thick for sides and back and 18mm thick prelaminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6mm thick plywood for bottom of drawer (Plywood, grade BWR, type BB with no. of ply 5) including fittings such as knobs etc all as specified/directed and as shown on drg. Note:- Each drawer will be measured as single unit.

Removing the existing unserviceable back and supply and fix new back size 1145mmx700mm, made out of 6mm thick Plywood grade BWR, type BB, no. of ply 5, with two coats of synthetic enamel paint over a coat of primer all as specified/directed and as shown on drg.

Removing the existing unserviceable side and supply and fix new side size 600mmx700mm, made out of prelaminated particle board, 18mm thick exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination all as specified/directed and as shown on drg. Note:- Each side will be measured as single unit.

Removing the existing unserviceable leg and supply and fix new teak wood leg size 35mmx55mmx717mm, etc complete all as specified/directed and as shown on drg.

TABLE DINING 8 PERSONS 1800mm x 900mm (Drg No. FD-273 FD-239 - applicable to item nos. 12 to 15) Removing the existing unserviceable damaged top and supply and fix new top with a new prelaminated particle board 18mm with 6 mm thick teak wood edging all round of size 1800mmx900mm all as specified/directed and as shown on drg..

Removing the existing unserviceable damaged front and back rails & supply and fix new teak wood front of size 15mmx100mmx1800mm and back rails all as specified/directed and as shown on drg..

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg all as specified and as shown on drg of size 75mmx40mmx700mm.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx100mmx900mm all as specified and as shown on drg .

TABLE PEG (Drg No. FD- 277: - applicable to item nos. 16 to 19) Removing the existing unserviceable top and supply and fix new top of size 450x300 mm made out of 18mm thick pre-laminated particle board and 4mm thick teak wood edging round the top of table all as specified and as shown on drg.

Removing the existing unserviceable bottom rail and supply and fix new teak wood bottom rail of size 20x 40x300mm all as specified and as shown on drg.

Removing the existing unserviceable front/back rail and supply and fix new teak wood front/back rail of size 20x 40x450mm all as specified and asshown on drg.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30x50x380 mm all as specified and as shown on drg.

TABLE CENTRE (Drg No. FD-274 :- applicable to item Nos 20 to 23) Removing the existing unserviceable top and supply and fix new top of size 900mm x 450mm made out of 18mm thick pre laminated particle board and provided 4mm thick teak wood beading alround of table top all as specified and as shown on drg.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 30mmx60mmx400mm all as specified and as shown on drg.

Removing the existing unserviceable long rail of size 30mmx60mmx900mm and supply and fix new teak wood long rail all as specified and as shown on drg.

All as per item Ser no 22 here-in-before but short rail of size 30mmx60mmx450mm.

TABLE DRESSING WITH MIRROR LADIES (Drg No. FD-32 FD-251 - applicable to item nos. 24 to 31) Removing the existing unserviceable drawers and supply and fix new drawers of size 300mmx380mm, 3 Nos & 315mmx115mm, 2 Nos made out of teak wood plank 12mm thick for sides/ back and 18 mm thick pre-laminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination for front and 6 mm thick plywood, grade BWR, type BB with no. of ply 5 for bottom of drawers, including fittings such as knobs etc all as specified and as shown on drg. Note:-Each drawer shall be measured as single unit.

Removing the existing broken glass shutters and supply and fix new glass shutters of size 300mmx390mm, 2 Nos, 5mm thick all as specified and as shown on drgs. Note:- Each glass shutter will be measured as single unit.

Removing the existing unserviceable aluminium channel and supply and fix new aluminium channel of width 10mm, 1mm thick suitable for the drawer of size 530mm long all as shown on drgs.

Removing the existing unserviceable plywood portion from back of mirror and supply and fix new back with frame of mirror of size 395mmx1230mm made out of 6 mm thick plywood, grade BWR, type BB with no of ply 5 all as specified and as shown on drgs.

Removing the existing unserviceable mirror and supply and fix new mirror of size 365mmx1220mm, 5 mm thick complete with frame and back all as specified and shown on shown on drgs.

Removing the existing unserviceable 12mm ply wood from back and supply and fix new back of size 395mmx900mm of table dressing ladies made out of 12 mm thick plywood commercial quality all as specified and as shown on drgs.

Removing the existing unserviceable frame with legs and supply and fix new teak wood frame with 4 legs short frame of size 235mmx40mmx25mm, 2 nos & and long frame of size 650mmx40mmx25mm, 2nos and leg of size 155x45x45mm all as specified and shown on drgs.

Removing the existing unserviceable leg and supply and fix new leg made out of teak wood of size 155mmx45mmx45mm, 4 nos all as specified and as shown on drgs. Note:- Each leg shall be measured as single unit.

TABLE 900X600 WITH DRAWER (Drg No. FD-41 & FD-283 FDapplicable to item nos. 32 to 35) Removing the existing unserviceable table top and supply and fix new top of size 900mmx600mm of prelaminated particle board 18mm of size interior grade with 4mm thick teak wood edging all round all as specified and as shown on drgs.

Removing the existing unserviceable/damaged front and back rails and supply and fix new teak wood front and back rails of size 25mmx130mmx740mm all as specified and as shown on drg.

Removing the existing unserviceable damaged leg and supply and fix new teak wood leg of size 60mm to 40mm(bottom) with a height of 735mm all as specified and as shown on drg.

Removing the existing unserviceable damaged side rails and supply and fix new teak wood side rails of size 25mmx130mmx440mm all as specified and as shown on drg.

TEAPOY (Drg No. FD-34 FD-278 FD-232 FD-382 - applicable to item nos. 36 to 39) Removing the existing unserviceable top and supply and fix new top of size 600mmx450mm made out of 18mm thick pre-laminated particle board exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination with 4mm thick teak wood edging al-round the top of teapoy all as specified and as shown on drg.

Removing the existing unserviceable leg and supply and fix new teak wood leg of size 515mmx45mmx45mm all as specified and as shown on drg.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 450mmx50mmx20mm all as specified and as shown on drgs.

Removing the existing unserviceable side rail and supply and fix new teak wood side rail of size 390mmx50mmx20mm all as specified and as shown on drgs.

SOFA SETs (Drg No. FD-281 - applicable to item nos. 40 to 48) Removing the existing unserviceable tapestry cloth, cushion and replacing with new tapestry cloth as per sample with foam cushion of size 560mmx530mm, 40 density, 100mm thick, including inner long all as shown on drgs and as directed. Note :- Each cushion for seat or back will be measured as single unit.

Removing the existing unserviceable leg from sofa and supply and fix new teak wood leg of size 510mmx75mmx35mm all as shown on drg and as directed.

Removing the existing unserviceable arm rest from sofa and supply and fix new teak wooden arm rest of size 750mmx70mmx35mm all as shown on drawing and as directed .

Removing the existing unserviceable side rail from sofa and supply and fix new teak wood side rail of size 690mmx100mmx35mm all as shown on drawing and as directed .

Removing the existing unserviceable bearer from sofa long pieces and supply and fix new teak wood bearer of size 590mmx50mmx22mm all as shown on drawing and as directed .

Removing the existing unserviceable bearer from sofa short pieces and supply and fix new teak wood bearer of size 440mmx50mmx22mm all as shown on drawing and as directed .

Removing the existing unserviceable battens from sofa and supply and fix new teak wood battens of size 570mmx50mmx22mm all as shown on drawing and as directed .

Removing the existing unserviceable front rail from sofa long pieces and supply and fix new teak wood front rail all as shown on drawing and as directed .

Removing the existing unserviceable front rail from sofa short pieces and supply and fix new teak wood front rail of size 22mmx102mmx1740mm all as shown on drawing and as directed .

ALMIRAH LARGE STEEL (Drg No.FD-1031) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah large steel complete as shown on drgs and all as directed by the Engr in Charge.

ALMIRAH SMALL STEEL (Drg No.FD-1032) Removing the existing unserviceable three way locking device and supply and fix three way locking device with cover for almirah medium steel complete as shown on drgs and all as directed by the Engr in Charge.

ALMIRAH LARGE STEEL/SMALL STEEL (Drg No. FD-1031 FD-1032 FD-6 - applicable to item nos. 51 to 59) Removing the existing unserviceable lock and supply and fix new lock Make: Godrej/Link/Harrison of appropriate size, 6 levers with duplicate keys chromium plated or equivalent as suitable in almirah large/ medium steel as shown on drgs and all as directed. Notes : (i) Unit rate quoted shall include for provision/repairs to back plate, cover to key hole, back side cover, locking device etc. (ii) Removing the existing steel chromium plated handle and supply and fix new handles shall be measured and paid separately.

Removing the existing unserviceable handle and supply and fix new chromium plated M S handle 125mm long to almirah large/small steel as shown on drg and all as specified and as directed.

Removing the existing unserviceable clamps for shelves and spot welding the shelves to almirah sides as directed and shown on drgs for almirah large/small steel. Note:- Welding each shelf completely will be measured as a single unit.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah large steel of Size 920 x 485 x 1985mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete all as specified and as directed.

Material and labour for preparation of old painted steel surfaces and applying one coat of synthetic enamel paint on all external and internal surfaces of almirah small steel of Size 760mm x 440mm x 1270 mm including fixing new 3mm hard rubber pad in the bottom of legs etc complete all as specified and as directed.

Removing the existing unserviceable/ damaged shelves for almirah large steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drg.

Removing the existing unserviceable/ damaged shelves for almirah small steel and supply and fix MS sheet CRC 1mm thick bent to shape and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drgs.

Removing the existing unserviceable/ damaged/ broken legs for almirah large and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drgs.

Removing the existing unserviceable/ damaged/ broken legs for almirah small and supply and fix new legs and applying two coat of synthetic enamel paint over a coat of red oxide primer including welding to the almirah all as specified and as shown on drgs.

TABLE CLERK STEEL (Drg No.FD-1004 - applicable to item nos. 60 to 61) Material and Labour for cleaning / preparing the existing surfaces of table office clerks steel including inner surfaces of steel drawers and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish and to fix hard rubber shoe for legs all as directed.

Removing the existing unserviceable drawers of table office clerk steel and supply and fix new drawer made of MS sheet CRC 1 mm thick bent to shape to its original position including Godrej lock steel of 6 levers or equivalent and applying one coat of synthetic enamel paint over a coat of red oxide primer all as specified and as shown on drgs.

TABLE WITH DRAWER STEEL 900 X 600 X 760 MM (Drg No. FD-1008 - applicable to item nos. 62 to 65) Removing the existing unserviceable top and supply and fix new top of particle board commercial 18 mm thick exterior grade pasted with 1.5 mm thick plastic laminated sheet fixed on top all as directed and as shown on drgs.

Removing the existing unserviceable drawers of table and supply and fix new drawer made out of MS sheet CRC 1mm thick bent to shape to its original position and applying two coat of synthetic enamel paint over a a coat of red oxide primer including welding to the table dining and all as specified and as shown on drgs.

Removing the existing unserviceable/damaged leg/ frame and replacing with new leg/frame of 25mm x 25mm square MS Tube 1.6 mm thick welded and applying two coat of synthetic enamel paint over a one coat of red oxide primer including welding to the table and all as specified and as shown on drgs.

Material and labour for preparing old steel surfaces of steel frame of table 900x600x760 mm with one coat of synthetic enamel paint as specified and as shown on drgs.

LOCKER STEEL (BUILT IN) (Drg No. FD-1029 - applicable to item nos. 66 to 70) Material and Labour for cleaning/preparing the existing surfaces of locker steel including inner and outer surfaces and applying one coat of synthetic enamel paint by spray process to achieve a uniform finish all as directed and as shown on drg.

Removing the existing unserviceable/damaged/broken legs for lockers steel and supply & fix new legs and applying one coat of synthetic enamel paint over one coat of red oxide primer including welding to the locker and providing rubber pad 3mm thick for legs all as specified and as shown on drgs.

Removing the existing unserviceable/damaged hanging rod and supply and fix new hanging rod 20 mm dia steel chromium plated conduit pipe and two sockets shall be provided at the end of hanging rod.

Removing the existing unserviceable/damaged handle and supply and fix new chromium plated handle 100 mm long to locker steel fixed to shutters all as specified/directed and as shown on drg.

Removing the existing unserviceable/damaged Hasp and staple and supply and fix new cromium plated hasp & staple 75 mm long to locker steel all as specified/directed and as shown on drg.

Chair Dining FD (Drg No. FD-288 and FD-279 - applicable to item nos. 71 to 76) : Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 890mmx65mmx65mm complete all as shown on drg complete all as specified and as directed.

Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 455mmx45mmx45mm complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable back rest and supply and fix new teak wood back rest of size 380mmx50mmx19mm complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 400mmx65mmx30mm including drilling holes at 12.5 mm C/C as shown on drg complete all as specified and as directed.

Removing the existing unserviceable rear rail and supply and fix new teak wood rear rail of size 400mmx65mmx30mm including drilling holes at 12.5 mm C/C as shown on drg complete all as specified and as directed.

Removing the existing unserviceable side rails and supply and fix new teak wood side rails of size 380mmx65mmx30mm including drilling holes at 12.5 mm C/C complete as shown on drg complete all as specified and as directed.

CHAIR EASY FD (Drg No. FD-17/229 - applicable to item nos. 77 to 82) : Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 535mmx40mmx40mm complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 535mmx40mmx40mm complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable broken Arm rest and supply and fix new teak wood arm rest of size 610mmx55mmx25mm complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable front frame and supply and fix new teak wood front frame of size 53mmx70mmx25mm including drilling holes at 12.5 mm C/C complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 520mmx55mmx25mm complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable rear rail and supply and fix new teak wood rear rails of size 500mmx50mmx25mm as shown on drg complete all as specified and as directed.

Chair Writing (Drg No. FD-20 and FD-280 - applicable to item nos. 83 to 89) : Removing the existing unserviceable rear leg and supply and fix new teak wood rear leg of size 890mmx65mmx65mm complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable front leg and supply and fix new teak wood front leg of size 675mmx45mmx45mm complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable back rest and supply and fix new teak wood back rest of size 445mmx65mmx12mm complete as shown on drg complete all as specified and as directed.

Removing the existing unserviceable front rail and supply and fix new teak wood front rail of size 490mmx65mmx30mm including drilling holes at 12.5 mm C/C as shown on drg complete all as specified and as directed.

Removing the existing unserviceable rear rail and supply and fix new teak wood rear rail of size 440mmx65mmx30mm including drilling holes at 12.5 mm C/C as shown on drg and complete all as specified and as directed.

Removing the existing unserviceable side rails and supply and fix new teak wood side rails 440mmx65mmx30mm including drilling holes at 12.5 mm C/C as shown on drg complete all as specified and as directed.

Removing the existing unserviceable/ broken Arm rest and supply and fix new teak wood Arm rest of size 495mmx50mmx19mm complete as shown on drg complete all as specified and as directed.

CHAIR TUBULAR STEEL WITH /WITHOUT ARMS (Drg No. FD-75 - applicable to item nos. 90 to 96) Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel with arms all as directed/specified and as sshown on drg.

Material and labour for preparing the surfaces of old steel tubular frame of the chair with one coat of synthetic enamel paint smoke grey shade for chair tubular steel without arms all as directed/specified and as sshown on drg.

Removing the existing unserviceable/damaged seats from chair tubular steel with/without arms and supply and fix new frame of size 480mmx450mmx25mmx 4 Nos made out of teak wood frame with half round beading at edges all as directed/specified and as shown on drg.

Removing the existing unserviceable/damaged back from chair tublular steel with/without arms and supply and fix new back frame of size 480mmx45mmx25mmx 4 Nos made out of teak wood frame all as directed/specified and as shown on drg.

Removing the existing unserviceable/broken arm rest and supply and fix new arm rest of size 380mmx50mmx25mmx 2 Nos with 1st class hard wood made to shape and painted with two coats of black synthetic enamel paint for chair tubular steel with arms all as directed/specified and as shown on drg.

Removing the existing unserviceable rubber shoes from bottom of chair and supply and fix new hard rubber shoes to the bottom of chair all as directed/specified and as shown on drg.

Removing the existing unserviceable PVC/rubber plug from top of chairs and supply and fix new PVC / rubber plug to the top of chair all as directed/specified and as shown on drg.

Trestle Store Room (Drg No. FD-86 - applicable to item nos. 97 to 99): Long Rail :- Removing existing long rail and S & F new long rail of size 100mm x 100mm length as specified made out of second class hard wood all as per drg and as specified by Engr-in-charge.

Middle Stiffner :- Removing existing middle stiffner and S & F new middle stiffners of size 100mm x 100mm length as specified made out of second class hard wood all as per drg and as specified by Engr-in-charge.

Legs :- Removing existing legs and S & F new legs of size 100mm x 100mm length as specified made out of second class hard wood all as per drg and as specified by Engr- in - charge

Vivek Engineers

Global Furnisherts