Dismantling, diversion and erection of electric poles, conductor etc for extension of railway siding platform, power supply of CC cameras and for power supply reorganization for weighbridges and wind barrier work at railway siding no-3, BOCM, LKPA

Amount

Erection of metallic pole of following length in cement concrete 1:3:6(1 cement ,3 coarse sand,6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as reqd.-Above 8.0 mtrs and upto 11 mtrs

Dismantling of pole/ street light standard/ strut embedded in cement concrete foundation etc. as required.

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle iron/ channel iron cross arm on wood/ RCC/ PCC/ steel tubular/ rail pole etc. as required.

Erection of AAA conductor of 7/2.00 mm to 7/3.15 mm dia. including binding etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and erection of 100 mm X 65 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Supplying and erection of 75 mm X 90 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .

Labour charges for steel work welded in built up section trusses and frame work including cutting, hoisting and fixing in position as required.

Supply of G.I. Wire-8SWG

Erection of GI wire No-8 SWG including binding etc. as required

Supply bof MS angle & flat ,Size 65 mm x 8 mm for bracket, 50 mm x 6 mm for clamp

Supply of M.S Bolt & Nut size 16mm x 50mm

Erection of Cardle guard

Supplying of channel iron 100 mm X 50 mm X 6 mm (9.56 kg per metre) V shape cross arm for two 33 KV over head line conductors complete with 50 mm X 6mm M.S. flat iron clamps, bolts and nuts including drilling holes for insulator pins, bolts, nuts, washers etc and painting with primer and finish paint as required .

Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.-200A TP&N

Total impact of GST for the purpose of CTC

M/S LIGHT PALACE

M/S H.A. ENTERPRISES

RK POWER & CONSTRUCTION