GE/Token-28/2025-26

Amount

Taking down cement plaster of any description on brick stone or concrete walls surfaces including raking out joints hacking for keys scrubbing down with water etc incl remove all debris in 2 KM form site complete all as specified and directed.

M&L for 15 mm thick rendering in cement mortar on fair faces of brick work or concrete surfaces, in cement mortar (1:4 ) mixed finished even and fair etc complete all as specified and directed

M&L Rendering 15 mm thick in CM 1:6 on other than fair faces of brick work or concrete surfaces finished even and fair without using extra cement complete all as specified.

M&L for preparation of newly/Old plastered surfaces of walls and providing and applying putty of 1 mm thickness over plastered surface to prepare the surface even and smooth and finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified as directed by Engr-in-charge.

M&L for Preparation of new surfaces (Plastered or un-plastered) of walls and applying two coats of oil bound distemper complete all as specified.

Dismantling water tanks and removing to store of 500 Ltr Capacity

Demolition of brick work built in cement or cement lime mortar of any description including quoins,arches,pillars,etc., all as directed.

M & L for brick work with Cement Mortar1:6 using sub class 'B' bricks, old size , straight or curved on plan exceeding 6 m mean radius all as specified and directed.

Material and labour for brick work with sub class B bricks of old size, straight or curved on plan exc 6m mean radius in half brick walls, in CM 1:4 complete all as specified and directed.

Dismantling of wall and ceiling/cup board board fibre pulp AC boards etc any thickness including cover fillets removing the wiring

M and L Providing & Fixing False ceiling with semi perforated 12mm thcik micro tegular edged at all heights with GRG (Glass Fibre reinforced Gypsum) false ceiling tiles for temp buildings/PMT Bldgs of size 595x595mm of approved texture, design and pattern having moisture content less than 2%,humidity resistance of 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS 476 (part-4)-1970 and light Code Description unit rate No 429 SUB HEAD :26.0 NEW TECHNOLOGIES AND MATERIAL reflectance of 85% minimum to be laid in true horizoatal level suspended on interlocking metel T-Grid of hot dipped galvanised iron section of 0.33mm thick (galvanised @ 120 grams oer sqm including both sides) comprising of main-T runners of size 15x32mm of length 3000mm, vross-T of size 15x32nn of lenght 1200mm amd secondry itermediate cross-T of size 15x32 of lenght 600mm to form grid module of size 600x600mm, suspended from ceiling using galvanised mild steel items (galvanising @ 80 grams per sqm) ie. 50mm long, 8mm outer diameter M-6 dash fasteners or 3 to 4 mm GI hanging wire for temp Bldg length/ht as per site req ,6mm dia fully threaded hanger rod upto 1000mm length and L-shape level adjuster of size 85x25x2mm.Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000mm to be fixed on perimeter wall/partition with the help of plastic rawl pluhs at 450mm center to center and 40mm long dry wall screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-incharge.

Taking down chowkhat or frame not exceeding 1.5 sqm each with shutter (without taking off shutter from the frame)

Taking down chowkhat or frame exceeding 1.5 Sqm each and not exceeding 4 Sqm each sqm each with shutter (without taking off shutter from the frame)

S&F Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid decorative type flush door shutter of size 35 mm thick comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibres (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2 , modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant. WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer?In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)complete all as specified and directed.

S&F glazed Skelton shutter IInd class hard wood 30 mm thick rebated and prepared to received glass, gauge etc divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers fitted with mitred beads for securing glass etc size of members of shutter as specified in SSR Part-I section 8,clause 8.24(a) etc.complete all as specified and directed.

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 105x60mm all as specified

S&F Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified,size 165x60mm(double frame)

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors,windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-Charge.

S&F factory made uPVC white colour three track three panels sliding window with flyproof S.S. wiremesh ( Two nos. glazed & one no. wiremesh panels ) upto 1.50m ht made of big series frame 116 x 45mm & sash 46 x 62mm both having wall thickness of 2.3 + 0.20mm and single glazing bead/ double glazing beading of appropriate dimension ( Area of window upto 2.0 sqmtr) comprising of uPVC multichambered frame and mullion (wherevr required) extruded profile duly reinforced with 1.60 +0.20mm thick galvanised mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropraiate dimension, EPDM gasket, G.I. fasteners 100 x 8mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless screw etc.Profile of frame & sash shall be miterd cut and fusion welded at all corners, mullion (if reqd) shall be also fusion welded including 5mm thick toughened glass and SS wire mesh fixed and drilling holes for fixing hardwares and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of reqd size and approval quality, all complete as per approved drg and direction of Engr in charge. Note: For uPVC frame, sash and mullion extruded profiles ,minus 5% tolerance in dimension i.e depth and width of profile dimension in higher side shall be acceptable but no extra payment on this account shall be made.

S&F SS butt hinges medium weight 100 mm size fixed with SS screws.

S&F aluminium anodised barrel tower bolt extruded section 150 mm long and fixed with MS screws.

S&F 150 mm extruded aluminium alloy handle anodised fabricated type and fixed with mS screws.

S&F 300 mm extruded section aluminium alloy anodised, sliding door bolt with hasp and staple and fixing clip of sheet and fixing bolt and nut.

S&F for 300 mm MS ordinary rat tail rod pattern spring including roller and roller plate complete fixed on wooden frame or on wall with wooden plugs and set in cement mortar all as directed.

M&L preparation of new or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified

M&L preparation of Old or previously untreated steel and iron surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

M & L for preparation of Old or previously untreated wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint complete all as specified

S & F stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm complete all as specified and directed.

Taking up or down steel tubing and connections, including cleaning for re-fixing, bore of tubing 15mm

All as per item No. 29 above but 20 mm bore .

All as per item No. 29 above but 40 mm bore .

Supplying and laying 20 mm dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified complete all as directed

All as per item No. 32 above but 25 mm dia

All as per item No. 32 above but 40 mm dia

S & F Floor door stopper 150mm size of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor all as directed.

Supply and fix vitreous China wash hand basin (pedestal) white of size 550X400mm excluding taps, waste chain and plug and porcelain stopper and waste pipe & waste coupling including all necessary fitting and fixtures complete all as specified.

S & F in repairs 15 mm dia 600mm long PVC connections with brass check nut complete Make Polytuff/symet or equivalent.

S&F in repairs bib taps 15 mm bore chromium plated brass, fancy type, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule Make-Jaquar/marc/Kohlar, complete all as specified.

S&F in repairs angle valve, fancy type, chromium plated brass, 15mm, complete all as directed.

Demolition of stone slab and tiles of any description or thickness in floor apron etc complete all as specified and directed.

S & F for Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match to 10mm thick (1:4) CM Screed bed.

All as per item no. 42 except on vertical surfaces as in skirting etc over 10mm thick backing coat in CM 1:4, set and jointed in white cement with pigment to match all as specified and directed.

M&L for Glazed ceramic tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick rendering in cement mortar (1:6) complete all as specified and as directed.

M&L for 18-20 mm Granite (any type) work (table rubbed and polished) in steps,jambs,pillars window-cill,cooking platforms and incl 15mm thick screed bed in CM 1:6 using marble dust with admixture in CM (1:4) with pointing and white cement (1:2) of pigment to match with shade of granite all as spd.

M&L for machine cut polished Machine cut Kota stone 20-25mm thick as in floor, tread, riser, pillar fixed with neat cement slurry over backing coat of 20mm thick in CM (1:4) including rubbing and polishing complete all as specified.

Dismentling asbestos cement corrugated or semi corrugated sheets in roof fixed with L hook or cranked bolt.

S & F Pre- painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

Demolition of cement concrete (un-reinforced) as path, paving and any position and any thickness complete all as specified and directed.

M & L for 75 mm thick cement concrete 1:3:6 type C2 (using 40mm graded stone aggregate) as in plinth protection laid in bays & surfaces finished even and smooth , complete all as specified.

M & L for 40 mm thick cement concrete 1:2:4 type B1 (using 12.5mm graded stone aggregate) as in floor & surfaces finished even and fair using extra cement, complete all as specified.

Demolition of reinforced cement concrete in any position all as specified and as directed by Engineer -in-Charge.

Material and labour for reinforced cement concrete 1:2:4 type B1 (using 20mm graded stone aggregate) as in roof slabs, slab supported on walls, cooking platform, beams and columns, in floors roofs, landings, balconies, canopies and in chajjas, parapet, shelves and the like complete all as specified and directed.

Use and waste of form work to soffits of suspended slabs such as roof slab, Chajja, platforms and landings etc not exc 200mm thick (horizontal or sloping) for fair finished surfaces of concrete complete all as specified and directed.

S&F TMT steel bars of 10 mm dia and over, cut to length bent to shape required, including cranking bending spirally for hopping for columns, hooking ends and binding with mild steel wire (annealed) not less than 0.9 mm dia or securing with clips quality conforming to. complete all as specified and as directed.

M&L for rotational moulded polyethylene water storage tanks white colour 500 lts capacity, triple layered (cylindrical vertical with closed top) hoisted and fixed in position including 20 mm dia PTMT float valve, lid tank cover for polyethylene and polyethylene balldescription including fitting and fixtures complete all as specified. (ISI Marked)

S&F 20 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

S&F 25 mm bore tank nipple suitable for HDPE water tank. (Minimum weight 15 mm-38gms/20mm- 45gms /25mm- 65gms) complete all as specified and directed

Demolition and breaking up rain water pipes (CI,AC,PVC etc) set in any cement mortar of any diameter incl bends.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears ,110mm bore complete.

S/F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, soil, waste, vent pipe in any length with or without ears 75 mm bore complete.

Supply only for broken brick coarse aggregate n.exc 40mm deposited, spread and levelled in layers watered and rammed to a true surfaces complete all as specified.

S&F rolled sections as in main and cross beams, hip and jack rafters; purlins , pillars, trusses , water tank stage , framed guard bars, barred iron doors, ladders, frame balusters, walk ways, railing and similar work where connected to common rafters and running rails and guides for sliding doors; fixed with angle cleats or other connecting plates complete all as specified and directed.

Taking down carefully aluminium point wiring from wooden battan (light, fan, socket or power) completely including (fittings such as switches, ceiling roses, pendants, regulator, sockets etc).

Taking down old MCCB , TPN DBs , SPN DBs, & main switch/ enclosure box of any make and type from the site complete all as specified and directed.

Taking down old submain wiring of any size and make from the site complete all as specified and directed.

M&L point wiring with PVC insulated FRLS 1100 Volts unsheathed cable 1.5 Sqmm multistranded copper conductor and drawing concealed in wall & including nonmetalic rigid new PVC conduit medium grade ISI Marked not less than 20 mm dia of conduit, terminal box of 1.2 mm thick and 3 mm thick hylam sheet cover for terminal boxes also including porvision of earth wire PVC insulated FRLS 1100 Volts unsheathed 1.5 sqmm stranded copper conductor single core cable connected to common earth dolly the following :-

One light/fan/bell point controlled by one by one way switch ( switch to be measured and paid separtely).

One 3 pin socket outlet 5 hole 5 Amp independent including PVC unsheathed copper conductor 1.5 Sqmm cable as earth wire connected to common earth and to earth dully socket & switches to be measured and paid separately.

All as per above item No 68 (b) but Same board.

One power point with insulated stranded copper conductor cable 2.5 Sqmm single core for 3 pin 15 Amp switch socket and PVC insulated FRLS 1100 Volts unsheathed copper conductor 1.5 Sqmm in and including new PVC conduit medium grade not less than 25 mm dia, stranded conductor as earth wire connected to dolly complete.

M&L for submain wiring with two single core PVC insulated FRLS 1100 Volts unseathed stranded copper conductor cable 6 Sqmm in and including new PVC conduit medium grade not less than 20 mm dia, for submain wiring and connection complete FRLS 1100 volts unsheathed stranded copper conuctor cable of 6 Sqmm size stranded conductor as earthwire.Note-Two runs of 6 sqmm cable and one run of 6 sqmm cable and one run of PVC condit shall be measured as one RM.

S&F switch modular type 5 Amp SP one way ISI marked complete all as specified.

S&F switch modular type 15 Amp SP one way ISI marked complete all as specified.

S&F socket modular type5 pin 5 Amp flush type ISI marked complete all as specified.

S&F socket outlet modular type 2 in 1,3 pin 5/15 Amps ISI marked complete all as specified.

S&F ceiling rose 3 phase PVC polycorbonate,isolated body. complete all as specified.

S & F electronic fan regulator 5 step,360 degree rotation 120W-2 module, ISI marked, complete all as specified and directed by engr-in charge.

M&L for earthing of machinery/equipment/panel/installed at power house/subatation, complete with galvanised steel earth palte electrode 600 x 600 cm x 6.3 mm thick buried directly in ground (Earth pit not less than 2.5 mtrs deep below ground level) with top edge of the plate not less than 1.5 mtrs below normal ground level connecting to galvanised iron strip 25 x 4 mm as earthing lead by means of bolts, nuts, check nuts and washers of galvanised iron or steel and earth protected by 40 mm dia GI pipe medium grade and connected to distribution board/earthing test point all as shown in electrical plate No.3 of SSR Part-I )2009) and testing on completion all as specified and directed.

Supply & fix in repair factory made epoxy powder coated Distribution Board VTPN-4 ways with metal door (IP-43 protection) fabricated from minimum 1.6mm thick CRCA sheet and fixed flush to wall and suitable for universal mounting and including 200 Amp copper bus bar, neutral bar, standard DIN rail, Earth bar and cable ties for cable management, top and bottom removeable gland plates with knockouts and suitable for one TPN- MCCB 160 to 250 Amp as incomer and 40 to 63 Amp SP MCBs outgoing complete all as specified and conforming to IS : 8623.

Supply and fix MCB DB SPN 12 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and DP/SP MCBs as out going with tinned copper bus bar ,neutral link earth link complete all as directed by Engineer -in- Charge.

Supply and fix MCB DB SPN 8 way Horizontal, IP - 43 Protection double door 240 V AC 50Hz with for MCB SPN as incomer and SP MCBs as out going with tinned copper bus bar, cement spill protractor, door earthing, mechanical Impact Strength IK 08, neutral link earth link complete.

S&F MCB SPN 40 to 63 Amp "C " curve, 10 kA.

S&F MCB SP 6 to 32 Amp "C" curve ,10 kA.

Supply and fix LED batten luminaire surface mounted, 4 feet system wattage of 20 Watts with lifetime of 25000 burning hours with 70% of its initial lumen maintained. CRI>80, Power Factor > 0.95, THD< 20%, colour temperature - 6500K, surge protection 3KV in CM, IP-20 protected, meets LED IS specifications, Class - 1, Short circuit and over circuit protection, voltage range - 150 to 270 Volts AC, temperature range 0 to 50 DegreeC, system efficacy at luminarie level > 105 Lumens/watt and including connecting up with PVC sheathed 0.75 sqmm 3 core copper conductor flexible wire from ceiling rose to fitting fixed complete. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.

Supply and fix LED batten luminaire surface mounted 2 feet system wattage of 9-10 watts and not less than 900 lm system lumen output with life time of 25000 burning hours with 70% of its initial lumen maintained. CRI > 80, power factor > 0.95, THD < 10%, color temperature > 6500 K , surge protection 2.5 KV in CM IP- 20 protected meets LED IS specifications, short circuit and over circuit protection, voltage range - 150 to 270 volts AC, temperature range 0 to 50 Degree C, and including connecting up with PVC sheathed 1.5 sqmm 3 core copper conductor flexible wire fixed complete all as specified and directed. Note- All the above mentioned specs will be verified through LM 79 and LM 80 report of NABL accredited Lab before supply of LED fixtures.

M&L in replacement Decorative wall mounting CITY-1 Decorative wall light fixture made up of Polycarbonate, Including 14 W retrofit LED BULB (B-22 base). NOTE-1: Price of LED bulb included with city -1 fitting.

Supply and fix 10/12 watts PVC body bulkhead fitting with non yellowing polycarbonate cover, IP65 Protection, System level efficacy of the Luminary is >100lm/W with a life class of 25000 burning hours at L70 criteria, Power Factor >0.95, driver with Voltage range 150-270V, Temperature range 0 to 50 Deg, Driver efficiency >85%, THD<20%, CRI>80, Color Temperature-6500K, Surge protection of 4.0 KV, including connecting up with necessary PVC sheathed 3 core 0.75 Sqmm copper conductor flexible wire fixed complete all as specified and directed.

Supply and fix in repairs LED 2 X 2 ft backlite surface mounted fitting 36/40 Watts including connecting up with necessary PVC sheathed 3 core 1.5 Sqmm copper conductor flexible wire fixed complete.

Taking down carefully the existing ceiling fan of 1200/1400mm from its position after disconnecting electric connection and making good surface deposits to MES store and refxining the same after rewinding and all at same position all as specified and directed.

S & F pressure die cast aluminium housing LED street light luminaires with IP66 deg. of protection suitable for 60 watt LED fitting duly fixed on 40 mm dia GI mast including 50X 6 mm thick MS flat with suitable size of fastner including making connection flexible copper conductor cable from ceiling rose to fitting complete all as specified and directed. Note : The Contractor quoated the rates incl all accessories like suitable GI pipe mast, 50x6 mm thick MS flat, fashner, nut & bolts, suitable length of flexiable wire.

S&F in replacement MCCB 160 A, 4 pole 36 ka MCCB, completely connected with copper thimble and with all accessories complete all as specified and directed.

Supply and fixing new BLDC fan against old ceiling fans BLDC conversion three blade, Robust and reliable inverter motor (brush less DC Motor) powered by ECM technology, BEE 5 star rating for energy saving, rated Air delivery >220 cum/min, AC single phase 230/240 V of size 1200 mm sweep including making connection with three core flexible, copper winding in fan,copper cable pvc insulated of suitable length, complete all as directed. Note BLDC Fan should work on existing electronic fan regulator & also with remote controled.

Schedule of Credit

M/S MSD & Associate (BID ID -3374764)

SAGAR ENTERPRISES (BID ID -3366672)

M/s Durga Traders (BID ID -3364295)

J S CONSTRUCTION CO (BID ID -3366062)

M/s M M BAHL (BID ID -3366302)

POONAM ENTERPRISES (BID ID -3365744)

M/S ANIL KUMAR (BID ID -3368513)

M/s SAAR ENGINEERS (BID ID -3374888)