Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹4.3 LAccepted-Finance | L1 | Accepted-Finance AS PER BOQ | |
| 2 | L2₹4.4 L+₹13,150 (3.08%)Accepted-Finance | L2 | Accepted-Finance AS PER BOQ | |
| 3 | Rejected-Technical 1 SHAKTI NAGAR JAMMU JAMMU KASHMIR 180001 | JAMMU | JAMMU AND KASHMIR | 180001 | - | Rejected-Technical Disqualified as per comparative chart |
Tender Value
₹5.7 L
Closing Date
7 May 2022, 6:00 pmClosed
Executive Engineer
JKPHC JAMMU
Construction of Class Rooms over the existing Girls Common Room by way of Supply, Installation, Testing and Commissioning of Fire hydrant for 1st Floor at GCW Parade, Jammu. (Contract No 01)
2022_DGPJK_166949_1
01 of PHC JAMMU DIV/2022-23 Dated 18-04-2022
Open Tender
Machineries/ Mechanical Engg Items
Item Rate
30 days
JAMMU
REFER PQ TERMS AND CONDITIONS
3 documents required · 3 mandatory
₹1,000
Executive Engineer JKPHC Jammu
Exempted
Office of the Executive Engineer, JKPHC Jammu
21 May 2022
18 Apr 2022
9 May 2022
18 Apr 2022
7 May 2022
18 Apr 2022
18 Apr 2022 - 20 Apr 2022
21 Apr 2022
Amount
SITC of underground M.S Pipes (B class) including cutting, screwing, welding etc. and providing all fittings e.g flanges, bends, tees, elbows reducers, clamps, hinges etc. Underground pipes shall be wrapped & coated by providing twin coating of Bitumen wrapping with first coating bitumen coating Wrapping with bitumen Hessian cloth & finishing with Bitumen paint of following sizes:
a) 100 mm dia
b) 80 mm dia
Same as above but for over ground M.S Pipes (B class) including cutting holes & chases in bricks or RCC wall/slab & Making good the same. Painting with one coat of primer and two coats of synthetic enamel of approved shade of following sizes:
a) 100 mm dia
b) 80 mm dia
SITC of single headed oblique pattern hydrant Landing valve with 80mm dia flanged inlet and 63mm dia Instantaneous type female outlet complete.
Supply of non-percolated flexible hose RRL 63mm dia x 15 mtr long complete with instantaneous type 63mm dia male and female coupling and Riverted to hose pipe with riverts and GI wire.
Supply of 63mm dia short branch pipe with 20mm dia nozzle.
SITC of First aid hose reel wall mounting swinging type complete with drum & brackets, 25 mm dia ball valve & 20 mm dia 30 mtr long high pressure pad hose with shut off nozzle complete as req.
SITC of cast iron double flanged Butterfly valve complete of following sizes:
a) 100 mm dia
b) 80 mm dia
SITC of following accessories:
a) 25mm dia spring loaded air release valve.
b) Pressure Guage
c) 25 mm dia gate valve
SITC of cast iron double flanged NRV complete of following sizes:
a) 100 mm dia
SITC of GM Fire Brigade connection with collecting head 63mm,2 way instantaneous type male couplings with flanged outlet complete with blank caps.
S/l of 4 core 10 sqmm Aluminum cable from motor to starter.
SITC of pump with 450 LPM , 55 mtr head and 15 HP motor complete with Starter complete as required.
Earthwork excavation in trenches including backfilling and leveling the top after laying of MS pipe.( running mtr)
Supply & installation of weather proof hose cabinetsfabricated from 18 swg MS sheet/section with full front glass door and suitable to accommodate 2 nos 15 mtr long hoses and 1 no branch pipes as req.
S.I.T.C of Photo smoke detector.
S.I.T.C of Manual call box fabricated from 16 gauge MS sheet with hammer complete as req.
S.I.T.C of electronic hooter with audible range of 25-30mtr with suitable output wattage as req.
SITC of 2 zones solid-state main control panel suitable for wall mounting confirming to IS-2189 fabricated out of 16 guage CRCA sheet incorporating audio visual indication for each zones & 2x12V sealed dry maint. Free battery not less than 07AH capacity & battery charger complete.
S/l of 2 x 1.5 sqmm dia PVC insulated copper conductor armoured cable as req.
S/l of 4 x 1.5 sqmm dia PVC insulated copper conductor armoured cable as req.
Providing & fixing ABC type fire extinguishers 4 Kg cap. Complete with discharge arrangement, high-pressure hose pipe complete as req.
Providing & fixing CO2 type fire extinguishers 4.5 Kg cap. Complete with wheel valve arrangement, high-pressure wire Braided hose pipe as req. conf. to IS 2878
Bucket Stand
M/S YASIR IMRAN CONTRACTOR
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .