RENOVATION OF BARBETTE BUILDING AT CFEES UNDER GE I RND DELHI

Amount

Demolition of Cement Concrete including design mix cement concrete manually/ by mechanical means including disposal of material outside MoD land complete all as specified and directed.

Demolition of R.C.C. work of any description as in Chajjas, Cantilevers, Facia etc manually/ by mechanical means including cutting and stacking of steel bars/reinforcement and disposal of unserviceable material outside MoD land complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or wood) shutter of area 3 sq. metres and below including chowkhats, architrave, holdfasts etc complete all as specified and directed.

Dismantling doors, windows and clerestory windows (steel or wood)shutter of area beyond 3 sq. metres including chowkhats, architrave, holdfasts etc complete all as specified and directed.

Dismantling tile work for thickness of tiles 7 mm to 25 mm in floors/walls/dado and roof tiles (including CM bedding) laid in cement mortar bedding including disposal of rubbish/malba outside from Mod land within 20Km lead at approved municipal dumping ground complete all as specified and directed.

Taking down/ Dismantling old plaster/ rough cast plaster or skirting on brick or stone walls/ceiling etc. including raking out joints and cleaning the surface for plaster and disposal of rubbish/malba outside from Mod land within 20Km lead at approved municipal dumping ground complete all as specified and directed.

Disposal of building rubbish / malba / similar unserviceable, dismantled or waste materials by mechanical means, including loading, transporting, unloading to approved municipal dumping ground within 20Km lead complete all as specified and direction beyond 50 m initial lead, for all leads including all lifts involved complete all as specified and directed.

Dismantling steel work in built up sections in angles, tees, flats and channels, rolling shutters including all gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead complete all as specified and directed.

Demolishing brick work manually/ by mechanical means built in cement mortar including stacking of serviceable material including disposal of material/malba outside Mod land from 5KM upto 20KM lead at municipal dumping ground complete all as specified and directed.

M&L for Brick work with common burnt clay (non modular) subclass `B' bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes built in cement mortar 1:6 complete all as specified and directed.

M/L for cement concrete type C2 (1:3:6) using 40mm graded stone aggregate) as in surface channels and drains complete all as specified and directed.

M&L for brick work with Sub class B burnt clay bricks straight or curved on plan exc 6m mean radius built in C:M 1:4 complete all as specified and directed.

Providing and laying in position cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) for sub bases of floor, mass concrete finished even and rough to receive topping layer complete all as specified and directed.

M&L for joint free glazed coloured ceramic tiles of 300mm x 450mm x 7mm thick on vertical surface of walls set and jointed with neat cement slurry and pointed in white/coloured cement to match the shade of tiles, over and including 10mm thick rendering in CM 1:4, complete all as specified and directed.

M&L for Non - skid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match complete all as specified and directed.

M&L for Vitrified (light shade) tiles 8 to 9 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry, over and including 15 mm thick screed bed in CM 1:6 and pointed in white or coloured cement to match the shade of tile complete all as specified and directed.

M&L for 12 mm cement plaster of mix 1:6 (1 cement: 6 fine sand) in fine sand for height upto 10m from ground level on new or old brick works or concrete work finished even & fair without using extra cement complete all as specified and directed.

M&L for 12 mm cement plaster of mix 1:4 (1 cement: 4 fine sand) in fine sand for height upto 10m from ground on new or old brick works or concrete work finished even & fair without using extra cement ccomplete all as specified and directed.

M&L for Rough cast plaster upto 10 m height above ground level with a mixture of sand and gravel or crushed stone from 6 mm to 10 mm nominal size, dashed over and including the fresh plaster in two layers, under layer 12 mm cement plaster 1:4 (1 cement : 4 coarse sand) and top layer 10 mm cement plaster 1:3 (1 cement : 3 fine sand) mixed with 10% finely grounded hydrated lime by volume of cement finish using ordinary cement complete all as specified and directed.

M&L for 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) on ceiling new or old brick works or concrete work finished even & fair without using extra cement complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work or concrete surfaces finished even and fair without using extra cement in CM 1:4 complete all as specified and directed.

M&L for preparation of newly plastered surface/ old plastered surfaces of wall and applying 2mm thick white wall care putty (1mm thick in each coat), to give an even finished fair surface and preparing the surface for final finish of painting etc complete all as specified and directed.

M&L for Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) on wall /dado/vertical surfaces over and including water thinnable priming coat with cement primer complete all as specified and directed.

M&L for Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade on New work (two or more coats) on ceiling over and including water thinnable priming coat with cement primer completed all as specified and directed.

Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface fair including necessary repairs to scratches etc. complete. and M&L for Distempering two coat with oil bound washable distemper of approved brand and manufacture to give an even shade (two or more coats) on wall /dado/ceiling/soffit surfaces of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour completed all as specified and directed.

M&L for preparation of newly plastered surfaces of walls including all cornices, pilasters etc and applying two coats of acrylic exterior emulsion apex paint (weather proof) of approved tint / shade(s) over and including one coat of water based alkali resistant primer complete all as specified and directed.

Complete removal of existing treatment including preparation of plastered or unplastered old decorated surfaces of walls/soffits/chajjas etc incl pillasters and cornices etc. incl washing, rubbing down and stopping the previously treated surface and applying two coat of acrylic exterior emulsion apex paint (weather proof) of approved tint / shade(s) over and including one coat of water based alkali resistant primer complete all as specified and directed.

S&F in repair counter wash basin 560 x 400 x 205 mm snow white oval type including waste coupling 32 mm dia with ply nuts, PVC waste pipe and fixed complete all as specified and directed.

S&F in repair brass CP Pillar taps swan neck type 15mm nominal bore, cast copper alloy, fancy type with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

Providing and fixing uplasticised PVC connection pipe 15 mm nominal bore with brass unions with 45 cm length complete all as specified and directed.

S&F repair brass chromium plated angle valve 15mm nominal bore for basin mixer and geyser points of approved quality conforming to IS:8931 complete all as specified and directed.

S&F in repair P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS:7231, low level white with PVC in let ball valve, float and handle, 10 ltrs capacity and 32mm dia PVC bend for required squat pattern including fitting and flush pipe etc, set with concrete and making good to floor with all fittings and fixtures complete all as specified and directed.

Providing and fixing as in repair white vitreous china pedestal type water closet (European type W.C. pan)"EWC" with white plastic solid seat and lid,with connection to trap, and to flushing pipe anti-syphonage pipe and including sheet cover and CP jet etc with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required complete all as specified and directed.

S&F in repair white Vitreous China Urinal, Half stall type, complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; including CP urinal Spreader with brackets and Waste coupler complete all as specified and directed. .

S&F in repair brass long body bib cock 15 mm nominal bore of approved quality conforming to IS standards and weighing not less than 410 gms complete all as specified and directed.

Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc.complete all as specified and directed.

M&L for PCC 1:2:4 type C1 using 20 mm graded stone aggregate as in mass concrete over roof as in padding/ sub base flooring including cement slurry over old RCC surface, surface fair finished even & fair without using extra cement complete all as specified and directed.

Disconnecting damaged overhead/terrace PVC water storage tank of any size from water supply line and removing from the terrace including shifting at ground level complete all as specified and directed.

Providing and placing on terrace (at all floor levels) polyethylene water storage tank, 1000 liters capacity (cylindrical vertical with closed top) HDPE triple layered fixed and hoisted in position on roof at any height all as specified in SSR Part I complete with inlet and outlet of 20 mm GI tank connection nipple including 20mm Gun metal gate valve at inlet and outlet connection and making necessary holes for inlet, outlet and overflow pipes complete all as specified and directed.

Complete revoval of existing water proofing treatment including PCC padding / brick tiles/ brick coba and Mud Phaska etc. without damaging the existing slab complete all as directed and M&L for preparation of surfaces to achieve clean and sound concrete surfaces float finished and free from cavities and projecting nibs. All substrates should be dry clean and free of dust, plaster, oil,paint, grease, corrosion, deposits, and any other deleterious substances. Crackes/honey comb will be repaired by chasing open the area minimum 20mm depth in V-groove shape. All the chased substrate should be sound and cleaned using water. Smooth substrate must be mechanically roughened to provide an adequate key applying bond coat on the prepared surface with Nitobond SBR latex of FOSROC/smartcare repair polymer SBR latex of Asian paints/pidilite (Dr. Fixit Super Latex) or equivalent of Sika mixed slurry coat (1 SBR:1water:3 Cement). Reinstallement polymer modified mortar shall be complete within the overlay time of bonding coat. Later reinstating the chased area with Nitobond SBR latex admixed PMM, of FOSROC/Smartcare Repair polymer SBR latex admixed PMM of Asian paints/Pidilite (Dr. Fixit Pidicreate URP) or equivalent of sika inculding finsihing, curing, complete all as specified and directed.

M&L for Waterproofing Treatment over mother slab by Providing and applying 2 layers of FOSROC proofex Torchseal-3PI strandard or Asian paints smartcare APP membrane or equivanet in Sika/pidilite-3mm thick Non-woven polyster mat reinforced APP modified bituminious membrane. The system is applied in double layers (one in x-direction, other in y-direction). Membrane to be overlapped for 100 mm sideways and 150 mm at the end laps with each having followings specifications: M&L for Waterproofing Treatment over mother slab by Providing and applying 2 layers of FOSROC proofex Torchseal-3PI strandard or Asian paints smartcare APP membrane or equivanet in Sika/pidilite-3mm thick Non-woven polyster mat reinforced APP modified bituminious membrane. The system is applied in double layers (one in x-direction, other in y-direction). Membrane to be overlapped for 100 mm sideways and 150 mm at the end laps with each having followings specifications: a. Membrane thickness :3 mm (+/-10%) b. Tensile strenth ASTM D5147: >400N/5 CM(L&T) c. Tensile tear strenth ASTM D4073: 200N/5 CM d. Resistance to water pressure-DIN 52123: No Leak e. Elongation ASTM D5147 f. Water tightness (EN 1928-1) KPa: 60m System included Priming the substrate with Proofex Torchseal Primer/proofex smartcase bitumen Primer or equivalent in sika/pidilite (at consumption 0.4 litres/sqm), Provision and application of 3mm thick Proofex torchseal of fosroc/smartcare app membrane of Asian paints or equivalent in sika/pidilite in double layer and termination of the membrane at 450 mm from the roof level in groove of 50mmx50mm filled with Nitoseal PU 50 of Fosroc or smartcare hybrid PU sealant or equivalent in sika/pidilite

M&L for providing and installing 300 GSM non-woven geotextile membrane as a protection layer over the finish waterproofing treatment prior to protection screed complete all as specified and directed.

M&L for providing and laying PCC of M20 grade mixed with approved water proofing compound like Conplast WLXtra of fosroc or smartcare VltaliaNEO of Asian paints or equivalent in sika/pidilite an advanced technology based, corrosion resistance admixed as per ASTM G1, IS 2645, JISZ 1535 mixing @ 200 ml/bag of cement, includig control joints (6mm wide and 10 mm deep) at every 3mx3m panel size, making angle fillet of 75mmx75mm using M20 grade concrete at the corners.

M&L for induced control joints as in roof filling in the screed concrete with sealant Fosroc nitoseal PU50/ Asian paints smartcare PU sealant or equivalent in sika/pidilite.

M&L for hacking up the corners using suitable mean, later cleaning the same using water, followed by the application of Nitobond SBR latex or smartcare Repair polymer equivalent in Sika/pidilite/mixed slurry coat (1SBR:1water:3 cement) & later filling and making 100 mm x100mm concave coving using Nitobond SBR latex admixed PMM of FOSROC/smartcare Repair polymer SBR latex admixed PMM of Asian Paints or equivalent of sika/pidilite, including finishing, curing, all complete all as specified and directed Note for Ser No.40.00 to 40.05 :- (a) MoU will be done by the contractor with the one of the above OEM for carrying out water proofing treatment. (b) The roof treatment works shall be carried out through a specialized and authorized applicators of OEM only

Supply only Intergral water proofing compound complete all as specified and directed.

M&L for 15 mm thick plaster in CM 1:4 over concrete surfaces of roofs finished even and fair with WPC @ 3% by weight of cement complete all as specified and directed. Note :-WPC will be measured and paid seperately complete all as specified and directed.

Dismantling 15 to 40 mm dia G.I. pipe for Internal Work- Exposed on wall complete all as specified and directed.

S&F 15 mm dia nominal bore G.I. Pipes with new G.I. fittings and clamps, including making good the walls etc. concealed pipe, cutting chases and making good the wall complete all as specified and directed.

All as per item Ser No-44.00 above but GI Pipe 20mm bore.

Providing and fixing factory made P.V.C. door frame of size 50x47 mm with overall thickness of 5 mm, made out of extruded 5mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door frame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer’ instructions complete all as specified and directed.

S&F factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel rimers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of which 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5 mm thick, 95 mm wide PVC sheet out of which 75mm shall be flat and 20 mm shall be tapered in 45 degree on the inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mm x 2 ) thick, 20 mm wide ross PVC sheet be provided as gap insert for top rail & bottom rail, paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded/ sealed to the styles & rails with 7 mm (5 mm+2 mm) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc complete all as specified and directed.

S&F aluminium tower bolts 150x10 mm ,ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etccomplete all as specified and directed.

S&F aluminium handles 125 mm ,ISI marked, anodised transparent or dyed to required colour or shade, with necessary screws etc complete all as specified and directed.

S&F Powder Coated aluminium window and ventilator shutters, fixed type without sash bar, aluminium section weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws and all necessary builder hardware etc complete all as specified and directed.

Providing and fixing aluminium work for fixed portion/partition and frames of door and windows with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be fair, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / tainless steel screws, complete all as specified and directed.

S & F Powder coated aluminium door shutters,aluminium section weighing not less than 0.55 kg/m including necessary joining cleats,glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges,anodised aluminum snap beading screws, and all necessary builder hardware etc complete all as specified and directed.

S&F MS work in grill, gratings, frames, guard bar, ladder, stair railings, brackets, gates and similar works welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc complete all as specified and directed.

Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc complete all as specified and directed.

Providing and fixing glazing With glass panes of 5 mm thickness in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete all as specified and directed.

S&F vertical venetian blinds consisting of Aluminium head rails,with flip cover of approved tint and traverse cord complete all as specified and directed.

M&L for for chipping of spalled and loose concrete and cleaning rust from reinforcement by sand blasting scrubing down concrete surfaces with wire brushes cleaning with water allow to dry and appling a layers of Zinc rich epoxy primer as an antirust on all exposed reinforcement followed by a layer of bounding coat of approved epoxy adhesive on complete exposed surfaces of concrete to be gunited all as specified and applying two layers of guniting over steel welded mesh 2 mm dia of wire and aperture 75 mm,total thickness of guniting not exc 40 mm (Avg thickness) in Cement mortar 1:2 using OPc 53 grade cement mixed with polycreate mixture @2% by weight of cement or as per menufacturer's instructions and finally appling cement plaster over guniting surface of required thickness to give even uniform and fair finishes confirming to proper geomtrics in cement mortar 1:3 to match the existing surfaces as in sides ,soffits of the slabs,chajja,fins,facia ,parapets,lintels,columns and beams etc complete including necessary scaffolding ,shuttering,chasing to brick work or RCC members at any heght up to 03 storied buildings including removal of all small trees/shurbs etc complete all as specified and directed.

S&F Hard drawn steel wire fabric 75 x 25 mm mesh of weight not less than 4.75 kg/sqm complete all as specified and directed.

Providing and fixing P.V.C. flexible waste pipe 32mm dia for sink or wash basin including P.V.C. waste fittings complete all as specified and directed.

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete all as specified and directed.

Providing and fixing pressed steel door frames and fixing with adjustable lugs with split end tail to each jamb conforming to IS: 4351, manufactured from commercial mild steel sheet of 1.60 mm thickness, including hinges, jamb, lock jamb, bead and pressed mild steel welded or rigidly fixed together by mechanical means, including M.S. pressed butt hinges 2.5 mm thick with mortar guards, lock strike-plate and applying a coat of approved steel primer after pre-treatment of the surface complete all as specified and directed.

Providing and fixing 30 mm thick flush door shutters including ISI marked Stainless Steel butt hinges with necessary screws flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction and well matched commercial ply veneering complete all as specified and directed.

Providing and fixing on wall face unplasticised 75mm dia Rigid PVC SWR pipes Single socketed conforming to IS : 13592 Type A, including jointing with seal ring complete all as specified and directed.

Dismantling C.I. or asbestos rain water pipe 100 mm dia/75mm dia with fittings and clamps including stacking the material within 50 metres lead complete all as specified and directed.

Providing and fixing on wall face unplasticised 110mm dia Rigid PVC SWR pipes Single socketed conforming to IS : 13592 Type A, including jointing with seal ring complete all as specified and directed.

Providing and fixing on wall face unplasticised - PVC moulded bend of for unplasticised Rigid PVC SWR pipes 110mm/75mm dia conforming to IS 13592 complete all as specified and directed.

M&L for Painting One or more coats on old work with synthetic enamel paint on wood/steel/concrete surfaces of approved brand and manufacture of required colour to give an even shade complete all as specified and directed.

M&L for Painting with synthetic enamel paint on wood/steel/concrete surfaces two or more coats on new work of approved brand and manufacture to give an even shade over a coat of primer as desired complete all as specified and directed.

Providing and fixing false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections consisting of main "T" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross "T" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main "T" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross "T" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture having 8 mm thick square edge PVC Laminated Gypsum Tile of size 595x595 mm, made of Gypsum plasterboard, manufactured from natural gypsum as per IS 2095 part I and laminated with white 0.16mm thick fire retardant PVC film on the face side and 12micron metalized polyester on the back side with all edges sealed with the face side PVC film which goes around and wraps the edges and is bonded to the edges and the back side metalized polyester film so as to make the tile a completely sealed unit in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main "T" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights complete all as specified and directed.

M&L for for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron ccomplete all as specified and directed.

M&L for for Providing and injecting chemical emulsion for Post Constructional Antitermite Treatment of soil under existing floors using emulsion @ one litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement: 2 coarse sand) to match the existing floors complete all as specified and directed.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, complete all as specified and directed but excluding the cost of painting complete all as specified and directed.

Dismantling stone slabs and tiles of any description or thickness in floors, aprons laid dry in any mortar complete all as specified and directed.

M&L for Granite (of any type) spotless and tint of granite as approved by GE, 18 to 20 mm thick as in floor, staircase, risers of steps, skirting, dado machine cut bedded and jointed with grey cement slurry and pointed with white cement and admixture of pigment to match the shade of granite stone including cutting,rubbing, and polishing surface and rounding of edges complete over and including 20 mm thick screed bed in CM 1:4 complete all as specified and directed. Note :- Granite to be used in staincase shall be single piece.

S&F aluminium section powder coated (powder coating not less than 50 micron thick) grill of size 6.0 mm x 4.5 mm thick section 10cm centre to centre spacing fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles complete with U-channel all around fixed in window with screws complete all as specified and directed

S&F Glass film 25 micron reflective/translucent type sticked to glass panes as per instructions of manufacturer's instructions complete all as specified and directed.

Providing and fixing Stainless Steel Grade A ISI SS 304 (18/8) kitchen sink without drain board 470x420 mm bowl depth 178 mm as per IS:13983 with C.I. brackets and stainless steel coupling, plug 40 mm,including PVC flexible waste pipe, washers including cantilever cast iron brackets connecting union etc including painting of fittings and brackets, cutting and making good the walls wherever required complete all as specified and directed

M&L for Kota stone slab 20-25mm thick jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing laid over 20mm thick screed bed of cement mortar 1 : 4 (1 cement : 4 coarse sand) complete all as specified and directed.

Earth work in excavation in all kinds of soil by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, complete all as specified and directed.

Excavating in trenches not exc 1.5m wide and not exc 1.5m in depth, for foundation etc for laying of cables or for shafts, wells, manholes etc not exc 10 sqm on plan and not exc 1.5 m in depth and getting out in any type of soil complete all as specified and directed.

M & L hardcore of broken bricks of gauge n.exc.63mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and well rammed to a true surface complete all as specified and directed.

Providing and laying in position cement concrete 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) excluding the cost of centering and shuttering- All work up to plinth level complete all as specified and directed.

Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc complete all as specified and directed.

Returning, filling in, including spreading, levelling, watering & well ramming in layers n exc 25 cm with any type of soil complete all as specified and directed.

Removing excavated material outside MoD land and depositing where directed at al level n. exc 1.50 m above the starting point complete all as specified and directed.

M&L for providing Precast cement concrete type B1 1:2:4 using 20mm graded stone aggregate as in coping complete all as specified and directed.

M&L for for providing precast cover slab in PCC 1:2:4 Type B1 using 20mm graded stone aggregate for drains with perforated hole complete all as specified and directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

Taking down carefully point wiring aluminium (light, fan, socket, and power) complete (fittings such as switches ceiling roses, pendent regulators sockets etc complete removing material and taken as credit and making good the disturbed surface of wall, floor etc complete all as specified and directed.

M & L for light point/fan point/exhaust fan point /socket point/call bell Point wiring one 3 pin 5 Amps switch/socket outlet point with one switch as per requirement. Using approved colour coding as per IS, with multistranded copper conductor 1.5 Sq. mm (nominal area), two single core, PVC insulated and unsheathed FRLS cable 1100 volts grade, ISI-694 marked drawn through in and including heavy duty, PVC conduit /casing caping including all accessories etc, heavy duty ISI marked, concealed / surface mounted as per site requirement with modular switch, GI box /PVC surface mounted modular box with earth dolly , covered with modular white cover plate with frame suitable for modular switches including PVC insulated multistranded copper conductor 1.5 Sqmm (nominal area) single core FRLS cable as earth continuity conductor to common earth and connecting to Earth dolly of for one 3 pin 5 Amp switch/ socket outlet points with one switch complete all as specified and directed.

All as per item but using 2.5 sq mm two single core copper conductor cable of multistranded FRLS PVC insulated unsheathed 1100 volts grade for 15 amps point including necessary running of 2.5 sq mm copper conductor flame retardant PVC wire as earth continuity conductor wiring and connecting to the common earth dolly complete all as specified and directed.

S&F modular type socket 5 pin 6 Amp 230 Volts AC complete all as specified and directed.

S&F modular type switch 16 Amp 230 Volts AC complete all as specified and directed.

S/F modular type socket 3 pin 16 Amp 230 Volts AC complete all as specified and directed.

S&F regulator for ceiling fan modular electronic step type 120watt- 2module suitable for 1200/1400mm ceiling fan complete all as specified and directed.

S&F in replacement of telephone socket jack RJ 11 With shutter complete all as specified and directed.

S&F ceiling rose surface type bakelite 65x50mm two to three terminal 230V PVC polycarbonate complete.

Dismantling of ceiling fan and painting the same with one or more coats of spray painting with synthetic enamel paint of approved brand and make to give an even shade including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same in same position after miror repairs if any complete all as specified and directed.

S&F AC socket with two pin and earth plug with one single pole MCB SP,C Curve type of capacity 20 Amp, 240V, 10 kA complete all as specified and directed.

S&F 32 Amps 415 volts TPN industrial type socket outlet with 4 pole and earth metal enclosure plug top alongwith 30 amps C curve TP MCB in sheet steel enclosure on surface or recessed with chained metal cover for socket out let and complete with connections testing and commissioning etc as required. complete all as specified and directed.

M&L for in replacement wiring for submain wiring along with earth wire with the 2x2.5 sqmm+ 1X 2.5 sq mm earth wire of FRLSH PVC insulated copper conductor single core cable in and including PVC concealed conduit pipe 20 mm external dia medium grade including all accessories ccomplete all as specified and directed. Note:-Three run of cable and one run of PVC conduit shall be measured as one unit (RM)

M&L for in replacement wiring for submain wiring along with earth wire with the 2x4 sqmm+ 1X 4 sq mm earth wire of FRLSH PVC insulated copper conductor single core cable load in and including PVC concealed conduit pipe 25 mm external dia medium grade including all accessories complete all as specified and directed. Note:-Three run of cable and one run of PVC conduit shall be measured as one unit (RM)

M&L for in replacement wiring for submain wiring along with earth wire with the 2x6 sqmm+ 1X6 sq mm earth wire of FRLSH PVC insulated copper conductor single core cable in and including PVC concealed conduit pipe 25 mm external dia medium grade including all accessories complete all as specified and directed. Note:-Three run of cable and one run of PVC conduit shall be measured as one unit (RM)

M&L for in replacement wiring for submain wiring along with earth wire with the 4x6 sqmm+ 2X6 sq mm earth wire of FRLSH PVC insulated copper conductor single core cable in and including PVC concealed conduit pipe 40 mm external dia medium grade including all accessories complete all as all as specified and directed. Note:- Four run of cable and one run of PVC conduit shall be measured as on unit (RM)

S&F in replacement of LED surface/recess mounted panel light mounting as per site requirement which provides soft-light and glare free symmetrical illumination 2'X2',36W, 230 volt, 50 Hz and cable for connecting to ceiling rose complete all as specified and directed.

S&F in replacement of Surface and wall mounted LED batten, extruded aluminium housing provided for efficient heat dissipation with polycarbonate diffuser & integrated electronic driver.trica batten 230 volt, 50 Hz, 20 watt and cable for connecting to ceiling rose complete all as specified and directed.

S&F IP-43, protection metal double door Vertical TPN -DB rated busbar, 415 volts, 50 HZ complete with interconnection links, blanking plates, cable ties, identification labels TPN 8 way, 24 modules suitable for accommodating 100 Amps MCCB 4 pole as incomer and SP/TP MCB as out going and concealed /surface on wall as per site requirement including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing Make - Legrand / ABB/L&T/ Schenider. Note- MCCB 100 Amps 4 pole as incomer will be measured seprately in relevant item.

S&F IP-43 ,MCB DB 12 way ,double door, with 100 amp rated busbar 240 V, SPN concealed / surface on wall as directed by Engr in charge including all cutting holes in or through walls, making good to walls, ceiling etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing

Supply and fix in replacement of MCCB four pole 415 volts 50 Hz , 100 amps, with rupturing capacity 16 KA complete all as specified and as directed including taking down old unserviceable MCCB complete all as specified and directed.

S&F MCB SPN 63 Amp 10 KA C' series complete all as specified and directed.

S&F MCB 6 Amp to 32 Amp sp 10 KA C' series complete all as specified and directed.

S&F MCB TP 63 Amp 10 KA C' seriescomplete all as specified and directed.

S&F rigid non- metallic concealed PVC conduit of size 25mm dia inclusive of all tees, bends, elbow, reducers, bell mouth tube ends and fixing accessories such as couplers. locknuts, saddles, pipe hook etc over the surface/recess complete all as specified and directed.

S&F Powder coated pressure die cast aluminium SMD LED street light with heat resistant of capacity 45 Watt with GI bracket made of 40 mm medium grade GI pipe bend to shape approx 1.2 mtr length incl Clamp etc complete all as specified and directed.

Material and Labour for earthing complete with Steel earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded by 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron earth wire 4.00 mm dia by means of Copper nuts, bolts and washers. GI wire shall be laid in 20 mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following provisions complete all as specified and shown in electrical plate No 3 of SSR Part-I & including testing on completion and taking out old materials of earthing :- (a) GI wire of 4 mm dia. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1, exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel TMT bar 75mm centre to centre both ways with 2 Nos MS handles of 12mm dia mild steel TMT bars suitable for carrying of pit cover. (d) All PCC work shall be in 1:2:4 type B-1 using 20mm graded stone aggregate.

Supply and fix 6 SWG GI wire at 0.50 meter below ground level for conductor earth electrode including connection termination with GI thumble etc as required complete all as specified and directed.

Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 185 Sqmm 3.5 core complete all as specified and directed.

Supply,laying, testing and commissionnig of LT cables 1100 volts grade, XLPE insulated and PVC sheathed, armoured, with multi stranded aluminum conductor, heavy duty conforming to IS - 1554 part-I, including cable glands, crimpimg type cable lugs in LT panel / MCCB in bldg etc to suit the cable laid in trenches/fixed to poles/drawn through pipes complete of sizes 50 Sqmm 3.5 core complete all as specified and directed.

M&L for for laying reinforced concrete pipes for cable protection, class NP2 of dia 100 mm, 2 nos half round (for bottom and top) levelled to a trne strate befor refilling of soil complete all as specified and directed.

Design, supply,install, test and comissioning of free standing floor mounted, dust and vermin proof Panel of suitable size for out door installation factory made both front and rear side double door system, fabricated with 3.15 mm thick CRCA sheet for load bearing members and 2 mm thick for doors and covers and shall be painted witrh epoxy powder paint by means of electro static gun after rigorous pre treatment comprising of cold phosphating process on all internal and external surfaces after due preparation of surfaces. The panel shall consist of 600 ,Amps rating TPN bus bars of high conductivity aluminium alloy and shall be provided with colour coded heat shrinkaable sleeves,with 600 mm depth of the panel. The panel shall be modular/cubical type with bus chamber cable allay and provided with separate fully compartments for each switch including instrumentation such as Ampere Meter, Volt meter, Phase indicating lamp with double stud hinged door , front and rear openable with locking arrangement and suitable for 1100 Volts grade , 3 phase 415 Volts , 50 cycles , AC Supply and to with stand short circuit fault level of not less than 10 KA and degree of protection shall be IP 54 . The panel shall be fixed with angle iron frame made of angles of size 50x50x6 mm , embedded 200 mm below ground level in PCC 1:2:4, Type B1 using 20 mm grade stone aggregate , 600 mm above ground level and comprising the following including taking out of old panels etc , removing of cables and connecting to new panels with all required material such as glands, lugs etc INCOMING :- (a) MCCB 4 pole 400 Amps capacity rup cap 36 KA at 415 volt 50 Hz AC fixed thermal magnetic release type and earth leakage protection ICS =100% ICU with rotary handle - 01 No incoming OUTGOING:- (a) MCCB 4 pole 250 Amps capacity rup cap 25 KA at 415 volt 50 Hz AC fixed thermal magnetic release typewith rotary handle - 01 Nos Out going (b) MCCB 4 pole100 Amps capacity rup cap 16 KA at 415 volt 50 Hz AC fixed thermal magnetic release type with rotary handle - 04 Nos Out going (c) MCCB 4 pole 63 Amps capacity rup cap 16 KA at 415 volt 50 Hz AC fixed thermal magnetic release type with rotary handle - 02 Nos Out going (d) LT Danger notice plate -01 No (e) Panel Control wiring complete with suitable size copper conductor cable and suitable size gland for LT cables

Material and Labour for earthing complete with iron earth plate electrode 600mmx600mmx6mm thick burried in ground vertically to a depth not less than 2.25meters below ground level with top edge of the earth plate at a depth not less than 1.5 meter below the ground level, earth plate surrounded 15cm thick layers of common salt and charcoal dust starting from ground below 15 cm of earth plate and up to 15 cm above the same. GI plate connected with galvanised iron strip of 32x6 mm by means of Copper nuts, bolts and washers. Strip laid in 40mm dia light grade GI pipe as protection from top of the plate up to test point (cost of protection pipe up to 7.5 meters from earth electrode will be included in the rates quoted by the contractor) with following complete all as specified and shown in electrical plate No 3 of SSR Part-I & testing on completion :- (a) GI strip of size 32mm x 6mm. (b) Watering pipe GI light grade 20mm dia from top of the earth electrode up to MS funnel with wire mesh embeded in floor of PCC earth pit. (GI Funnel should properly tightned on GI watering pipe and embeded in PCC floor of earth pit with open top suitable for watering of earth pits) (c) Excavation & earthwork in any type of soil PCC earth pit 30x30x30cm constructed in PCC 1:2:4 type B1 exposed surfaces smoothly finished with 15mm thick cement mortar 1:6 plaster including RCC pit cover 50mm thick 1:2:4 type B1 reinforced with 8mm dia mild steel bar 75mm centre to centre with 2 Nos MS handles of 12mm dia suitable for carrying of pit cover.

M&L for for Earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit / pipe or fixed to poles or any other indicated situation for loop earthing etc as required for 32x6 galvanized iron strip, complete all as specified and directed.

Supply and laying 80mm bore light grade GI pipe fixed to walls / poles or laid in trenches, road crossing etc, for protection of under ground cable including sealing ends with hessian cloth impregnated with bituminous compound in ground and with suitable clamps, bolt/nuts etc for fixing on walls, poles etc complete all as specified and directed.

Supply and install hi wall split units indoor / outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter for better indoor air quality with mimimum BEE 5 star rated of capacity 1.5 TR including electrolyte grade copper tubing including synthetic rubber foam for insulation for refrigerant copper piping complete all as directed. Note- The quoted rate is inclusive of necessary T&P, Rope, Ladder etc with safety equipment for execution of work upto 4 story building complete all as directed.

S & F in replacement of electrolyte grade copper tubing of size 1/4" suitable for any type of split type AC complete all as specified and directed.

All as per ser item No. 125.00 here-in-before but size 1/2"complete all as specified and directed.

Supply and install of AC out door stand on the wall suitable for outdoor unit upto 2 TR including grouting in the wall complete all as specified.

S&F PVC drain pipe in all respect complete with all necessary fitting such as elbow, tee, reducer etc of 25 mm dia complete in all as directed.

S&F synthetic rubber foam for insulation for refrigerant copper piping of size 1/2" internal dia split type AC complete all as specified.

S&F synthetic rubber foam for insulation for refrigerant copper piping of size 1/4" internal dia split type AC complete all as specified and directed.

Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 270 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 4 KVA complete all as directed.

Sree Ram Enterprises

SAWARIYA ENGINEERS AND CONTRACTORS

m/s Kailash Chander

Mohit Infratech