Development of Surrounding Area near Gangeshwar Complex, Fudam. (3rd Call)

Amount

Works

Civil Works :- Sec 1.0 Dismantling Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of Brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift.(ii) In Cement Mortar.

Dismantaling tiled of stone floors laid in mortar including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.

Dismantaling of sheet roofing including ridges, Hips, Valleys, Gutters etc. stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift.(i) G.I.sheet roofing

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the materials with all lead and lift.

Filling available excavated earth (excluding rock) in trenches. plinth, sides of foundations etc. in layers not exceeding 20 cm. in depth consolidating each deposited layer by ramming and watering.

Providing material and labour for Disposing off the un-used excavated earth, debris, malba, dismantled materials for all lead and lift/ depth out side the campus at non objectional place as directed by Engineer in charge.

Providing material and labour for Filling in foundation, plinth and plot filling with murrum (brought from out side) in layers of 20cm. thickness including watering, ramming and consolidating etc complete as directed by Engineer in charge.

Providing and filling sand below R.C.C. Raft in Layers including ramming and watering complete.

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-ll Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1% concrentration inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

Providingand laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6- crushed stone aggregates 20 mm nominal size) and curing complete including cost of formwork in (A) Wall Caps/ Coping

Providing TMT Bar FE 500D reinforcement for R.C.C. work including bending, binding (with 18 SWG -1.22 mm GI wire) and placing in position complete upto floor two level, all heights/ depth complete as per drawings, specifications and direction of Engineer in Charge.

Providing fusion bonded Epoxy coating not less than 175 micron thickness and upto 300 micron to reinforcement bars of any diameteer as per IS-13620-1993/ ASTM-775 M including testing of coating at plant and all taxes etc complete as directed by engineer ion charge.

Sec.4.0 Masonry works White Stone Bela mesonry block in course in superstructure with stone of approved quality in Lime Mortar 1:5 (1-Cement :5- course sand) including packing the joints etc. complete.

Providing material and labour for White Stone Bela mesonry work in partition walls upto 15 cm thickness in cement Mortar 1:4 ( 1- Cement : 4- course sand)

Providing upto floor two level precast cement concrete jali or grill 1:2:4 mix (1- Cement : 2- coarse sand : 4-graded stone aggregate 6mm nominal size) reinforced with 1.6 mm dia. Mild steel wire including roughening,cleaning, fixing and finishing in cement mortar 1:3 and curing complete. (A) 50mm thick

Sec.6.0 Plastering & Pointing works Providing material and labour for laying 10mm thick cement plaster in single coat on ceiling & stairs and soffits plastering and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand) for all floor, all level, all height (including all basement) with necessary scaffolding, curing, finishing, making grooves, forming pattas, hacking properly to RCC surface etc. complete as directed by the Engineer-in-charge.

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in (i) Cement mortar 1:3 (l-cement:3-sand) and finishing with a floating coat of neat cement slurry

Providing material and labour for laying 20mm thick sand faced cement plaster on walls upto height 10 metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand) with necessary scaffolding, curing, finishing, making grooves, forming pattas, hacking properly to RCC surface etc. complete as directed by the Engineer-in-charge.

8.0 Flooring works Providing and laying cement concrete flooring 1:2:4 (1-cement : 2-coarse sand : 4-graded stone aggregate 20mm nominal size) laid in one layer and finished with a floating coat of neat cement. (B) 50mm thick. (more than 10 ton)

Providing and laying polished Kota stone slab flooring over 20mm (Average) thick base of cement mortar 1:6 (1- cement : 6-coarse sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing etc. complete. (A) 25mm thick

Providing and laying polished kota stone slab 25mm thick in risers of steps,skirting Dedo and pillars laid on 10mm thick cement mortar 1:3 (1-Cement : 3 coarse sand) and jointed with gray cement slury mixed with pigment to match the shade of slab including rubbing and polishing etc. complete.

Providing material and labour for laying Cement Mortar for additional floor bedding in Cement Mortar 1:6 (1-Cement: 6 - coarse sand) including curing etc for all floor, all level all height. Additional bedding thickness shall be as per drawing and as directed by engineer in charge.

Sec.9.0 Painting works Applying two coats of Birla (white cement based) or Asian (acrylic lapy- putty) or equivalent & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Wall painting (two coats) with plastic emulsion paint of approved brand and manufacture on undecorated wall surface to give an even shade including throughly brushing the surface free from mortar droppings and other foreign matter and sand papered smooth.

Extra over item for painting with plastic emulsion paint of approved brand on ceilings and sloping roofs.

Finishing wall with weather proof exterior emulsion paint on wall surface (two coats) to give an required shape even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials.etc complete

Sec.10.0 Interior works Providing material and labour for fixing eco-friendly light weight calcium silicate false ceiling tiles having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for Extra Strength The Light weight calcium silicate ceiling tiles shall have, light reflection 85% non-combustible as per BS 476 part IV, 100% humidity resistance and also having thermal conductivity0.043° w/m KC for the best thermal Insulation. The Light weight calcium Silicate tile shall be of approved texture of size 595 x 595 x 15 mm to be laid on true horizontal level suspended inter locking metal grid of hot dipped galvanized steel sections (galvanizing @120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and size of 24X38mm made from 0.30 mm thick (minimum) sheet, 1200mm centre to centre, and cross ‘T’ of size 24x28mm made out of 0.33mm (Minimum) sheet spaced 1200mm along spaced between main ‘T’ at 600mm centre to centre to form agrid of 1200x600mm and secondary cross ’T’ to be interlocked at middle of the 1200X600mm panel to form grid of size 600x600mm resting on periphery walls/ partitions on a perimeter wall with the help of rawl plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm interval and laying 15mm thick Densified edges light weight calcium silicate ceiling tiles in the grid including, cutting /making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required, Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to ceiling with 12.5mm dia and 50mm long dash fasteners, 4mm GI adjustable rods with galvanized steel level clips of size 85X30X0.8mm, spaced at 1200mm centre to centre long main ‘T’ bottom exposed with 24mm of all T-sections shall be pre-painted with polyester baked paint, as per specifications, drawings and as directed by engineer-in-charge.

Providing & Fixing M/F Suspended 12.5mm Plain Gypsum Board which includes GI Perimeter Channel is fixed along the perimeter of existing wall/ partition with the help of screws at 600mm centres. GI Ceiling Angle is suspended at up to suitable height as per sight conditions by fixing it to the GI soffit clit with Soffit Cleat and Rawl Plug creating 1220mm x 1220mm grid. GI Intermediate channel is fixed to the GI Ceiling Angle with 2 Nos of 4.2x13 GI metal to metal screw. The GI Ceiling Section is then fixed to the GI Intermediate Channel with the help of Connecting Clip and in direction perpendicular to the Intermediate channel at 457mm c/c. All framing and grid section shall be GI (as per IS 513) having yeild strength 300 mpa and galvanized finish of 150 GSM as per IS 277. Single layer of 12.5mm tapered edge Plain Gypsum Board (Confirming to IS 2095-Part-I, 2011) is then screw fixed to ceiling section with 25mm drywall screws at 230mm centres. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with Jointing Compound & Joint Paper tape. The contractor should prepare shop drawings based on the concept drawing and get it approved by the Engineer-in-charge. After approval of drawings, the contractor shall prepare the sample based on the drawing and get it approved by the Engineer-in-Charge before execution. Rates shall be inclusive of cost of making cut outs/ openings for electrical fixtures, tube lights/ air-conditioners, grills, diffusers etc & providing additional sections for strengthening the openings/ cutouts, making grooves between wall & board or as per drawing for all floor, all level, all height etc as directed by Engineer in charge. Area of cutouts shall not be deducted and no extra payment shall be considered for additional sections provided. Only plan area shall be considered for payment.

Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M250 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete.

Providing and laying of Hot applied Thermoplastic compound 2.5 mm thick including Reflectorising Glass Beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC : 35 & finished surface to be level, uniform and free from streaks and holes. (As per Government letter No.SOR 102003/94/S-1/ Dated.20-7-2004)

Cat eyes/ pavement marker (MMC nail less with stud at bottom) Made out acrylic styrene – acrylonitrile of high impact polystyrene fitted with moulded of methacrylate reflector cube corner reflector design filled with tightly adhering potting compound as per ASTM D-788 size 11.5 x 7 x 1.60 cm or 10 x 10 x 1.75 cm. provided with bituminous adhesive in sufficient quantity with each unit for fixing. No nail shall allow for fixing. Reflector on both sides, minimum reflective area 12.9 sq.cms on each face. Coefficient of lamination as per specification and compressive strength 13 Tonnes at 23 degree centigrade, ( B ) Both side lense. (With stud as per design, installed in concrete or asphaltic surface by drilling holes of suitable size and fixed with bituminous adhesive as directed)

Sec.12 Signage Works Cautionary Warning Sign :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x 90 x 90 cms. equilateral triangle as per design of IRC-67-1977. Pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint ;reflectorised with retro refiectivesheeting as per latest M.O.S.T.Specifications; 3.1m long stand postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm, 75 x 75 x 6mm as required; painted with bestquality epoxy coatings in black andwhite bends. The details of symbol foreach board shall be as per theinstruction of engineer in charge. The fixing at site shall be in 1:2:4 CC blockof size 45 x 45 x 60 Cms. for each leg.including excavation, curing etc.complete under the supervision of engineer in charge.(A) Engineer Grade(VR)

Informatory Signs :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 80 x 60cms. rectangle as per the design of IRC-67-1977 pre treated with phospheting process & acid teching; coated with one coat of epoxyprimer and two coats of best qualityepoxy paint; reflectorised with retro reflective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand postand frame fabricated from suitable sizeiron angle of 35 x 35 x 3mm75x75x6mm as required; painted with best qualityepoxy coatings in black and whitebends, the details of symbol for eachboard shall details of symbol for eachboard shall be as per the instruction ofengineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x45 x GOcms. for each leg. including excavation curing tec. complete under the supervision of engineer in charge.(A) Engineer Grade(VR)...

Parking Signs :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 60 x 60cms. sequare plus 60 x 20cms rectangular additional plate as as per the design of IRC- 67-1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro reflective sheeting as per latest M.O.S.T. Specifications; 3.1m long stand post and frame fabricated from suitable size iron angle of 35 x 35 x 3mm 75x75x6mm as required; painted with best quality epoxy coatings in black and white bends, the details of symbol for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x 45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(A) Engineer Grade(VR)...

Village name/ Bump Ahed sign :-Providing and fixing sing boards made out of 2mm aluminium sheet; size 90 x 60cms. rectangle as as per the design of IRC-67-1977 pre treated with phospheting process & acid etching; coated with one coat of epoxy primer and two coats of best quality epoxy paint; reflectorised with retro refiective sheeting as per latest M.O.S.T. Specifications; Letters and numerals should be as per IRC-30-1968, 3.1m long (2 nos) stand post and frame fabricated from suitable size iron angle of 50 x 50 x 5mm painted with best quality epoxy coatings in black and white bends, the details of symbol or inscription/ numerals for each board shall be as per the instruction of engineer in charge. The fixing at site shall be in 1:2:4 CC block of size 45 x45 x 60cms. for each leg. including excavation curing etc. complete under the supervision of engineer in charge.(A) Engineer Grade(VR)...

Extra for using ground glass (frosted or obscured on one side) instead of plain glass.

Providing and fixing Fly proof galvanised M.S. wire gauge of I.S.l gauge designation 85 G. with wire of dia.0.56 mm to windows and celevating windows including 60 x 20mm beading of teak wood. (upto 10 ton)

Cutting holes up to 30x30 cm in walls including making good the same:- With common burnt clay F.P.S. (non modular) bricks

Providing material and labour for Cutting holes of required size in brick/ block masonry wall for fixing of exhaust fan including providing and fixing 300 mm dia PVC pipe conforming BIS-12818 and making good the same etc. complete as per direction of Engineer-in-charge.

SEC:5 Doors and Windows work Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid doorwindowCeosetory windows & other FramesChowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder rice huskwheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kgcum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), minimum compressive strength of 58 Nmm2, modulus of elasticity 900 Nmm2 and resistance to spread of flame of Class A category with property of being termiteborer proof, watermoisture proof and fire retardant and fixed in position with M.S hold fastlugsSS dash fasteners of required dia and length complete as per direction of Engineer-In- Charge. (M.S hold fastlugs or SS dash fasteners shall be paid for separately). Frame size 65 x 100 mm

Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately)

Providing and fixing factory made uPVC white colour sliding glazed window upto 1.50 m in height dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes, wire mesh and silicon sealent shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame and sash extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable Three track three panels sliding window made of (big series) frame 116 x 45 mm & sash 46 x 62 mm both having wall thickness of 2.3 ± 0.2 mm and single glazing bead / double glazing bead of appropriate dimension. (Area of window above 1.75 sqm)

Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable. Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension. (Area upto 0.75 sqm.)

Filling the gap in between joinery frame & adjacent RCC/ Brick/ Stone work by providing weather silicon sealant over backer rod of approved quality as per architectural drawings and direction of Engineer-in-charge complete Upto 5mm depth and 5 mm width

Providing and fixing M.S. grills as per approved pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.The grill to be fixed to masonry/RCC by anchoring with fastners or lugs to be embedded in RCC blocks as per the apporved drawing.No seperate measurement shall be made for fasteners/screws.The pattern shall be approved by architect/Engineer in charge prior to fabrication

Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISi, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width from 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

Providing material and labour for fixing SS 316 grade butt hinge of average 100 x 58 x 1.9 mm - with ball bearing of approved make as per approved sample with necessary screws etc. complete for all floor all height all level as directed by Engineer in Charge.

Providing and fixing bright finished brass 100 mm mortice latch and lock, ISI marked, with six levers and a pair of anodised (anodic coating not less than grade AC 10 as per IS : 1868) aluminium lever handles of approved quality with necessary screws etc. complete.

Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 200x10 mm

Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick : Float glass panes 4 mm thick glass pane (weight not less than 10kg/sqm)

Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion -Powder coated aluminium

18 mm thick plain cement mortar band in cement mortar 1:4 (1 cement :4 fine sand): Moulded band

Sec.7.0 Providing and laying water proofing treatment in sunken portion of WCs,bathroom etc., by applying cement slurry mixed with water proofing cementcompound consisting of applying : (a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints,corners, junctions of pipes and masonry with polymer mixed slurry.

Providing and applying fibre reinforced elastomeric liquid water proofing membrane with resilient acrylic polymers having Sun Reflectivity Index (SRI) of 105 on top of concrete roof in three coats @10.76 litre/ 10 sqm. One coat of self-priming of elastomeric waterproofing liquid (dilution with water in the ratio of 3:1) and two coats of undiluted elastomeric waterproofing liquid (dry film thickness of complete application/system not less than 500 microns). The operation shall be carried out after scrapping and properly cleaning the surface to remove loose particles with wire brushes, complete in all respect as per the direction of Engineer-in-Charge

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage. For vertical surface two coats @ 0.70 kg per sqm

Providing and applying integral crystalline slurry of hydrophilic in nature for waterproofing treatment to the RCC structures like retaining walls of the basement, water tanks, roof slabs, podiums, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc., prepared by mixing in the ratio of 5 : 2 (5 parts integral crystalline slurry : 2 parts water) for vertical surfaces and 3 : 1 (3 parts integral crystalline slurry : 1 part water) for horizontal surfaces and applying the same from negative (internal) side with the help of synthetic fiber brush. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e by reducing permeability of concrete by more than 90% compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure on negative side. The crystalline slurry shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the engineer-incharge. The product performance shall carry guarantee for 10 years against any leakage. For horizontal surface one coat @1.10 kg per sqm.

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only . Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.Glazed Vitrified tiles Matt/Antiskid finish of size.Size of Tile 600 x 600 mm.

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Extra for providing material and labour for Grouting the joints of any type of flooring tiles of Size upto 600mm having joints of 3mm / 4mm width and in full depth, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade and approved make (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge.

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour and shade. Area of slab over 0.50 sqm

Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 13.61.1 Two or more coats on new work

11.0 External Development work Providing and placing in position 100 mm thick factory made machine batched& machine mixed Precast RCC Rectangular Covers on drains of footpath ofvarious sizes, of M-25 grade cement concrete for RCC work, including cost ofcentering, shuttering, reinforcement of 8 mm dia TMT bars of Fe 500 grade @maximum 100mm c/c on both ways , neat cement punning on finished surface,properly encased on all edges with 1.6 mm thick , 100 mm wide MS sheet duly painted over priming coat , reinforcement to be welded at edges with MS sheetand providing 2 Nos. 12 mm dia bar for hooks etc i/c cost of cartage, all leads &lift, handling at site etc. all complete as per direction of Engineer-in-Charge.

Constructing soak pit 1.20x1.20x1.20 m filled with brickbats including S.W. drain pipe 100 mm diameter and 1.20 m long complete as per standard design

Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-III (size range 26.5 mm to 0.075 mm ) having CBR Value-20

Providing and laying tactile tile (for vision impaired persons as per standards) of size 300x300x9.8mm having with water absorption less than 0.5% and conforming to IS:15622 of approved make in all colours and shades in for outdoor floors such as footpath, court yard, multi modals location etc., laid on 20mm thick base of cement mortar 1:4 (1 cement : 4 coarse sand) in all shapes & patterns including grouting the joints with white cement mixed with matching pigments etc. complete as per direction of Engineer-in-Charge.

Providing material and labour for laying Porcelain Mosaic tiles of make by piccolo, Italia or Equivilant in different sizes (25mm x 25mm/ 50mm x 50mm/ 100mm x 100mm) having 8 mm thickness with water absorption less than 0.08% and conforming to IS: 15622, in any colours and shade, in Water body, skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS: 15477, in average 6 mm thickness, including grouting of joints for al depth al level as directed by engineer in charge. The tile shall be fixed as per approved pattern and design. Sample to be approved by Architect prior to procurement.

Providing and fixing Locks Baby latch of brass chromium 75mm long of approved quality with necessary screws etc. complete.

Sec.2.0 Earth work Providing material and labour, machinery for Excavation of foundation upto 1.5 m depth including sorting out and stacking of useful materials and disposing off the excavated stuff from 50 to 300 mtr for all lead, all lift/ depth etc complete as directed by Engineer in charge. - Soft rock.

Providing material and labour for laying in position Ready Mixed M-30 grade concrete/ batch mix concrete for reinforced cement conctere work, using cement content as per approved Design Mix without Fly Ash (Min cementitious level as per latest IS 456 shall be maintained) manufactured in fully automatic batching plant and transported to site of work in transit mixer for all lead having continuous agitated mixer, as per mix design for reinforced cement concrete work including any type of form work, pumping of R.M.C. from transit mixer to site of laying, cost of admixtures in recommended proportions as per IS: 9103 to accelerate/ retard setting of concrete, improve workability without impairing strength and durability; finishing, compacting, vibrating, curing etc for all elements, all floors, any heights/depths, any lead and lift but excluding the cost of reinforcement as directed by Engineer Incharge.

Ficus Virens (Pilkhan tree)TREE: (10' to 12' height & 3-5 inch girth) : Supply & plantation of trees as per specified plantation plan. This will also include excavation of pits (90cm x 90cm x90cm) ,mixing of soil additive (farm yard manure) @ 10kg per pit and garden soil, pesticides application ,staking,watering etc. Tree plantation should be carried out neatly accurately as per drawing etc and maintain the growth till handing over. Complete as directed by engineer-in-charge.

Cannon-ball (Kailashpati) TREE: (10' to 12' height & 3-5 inch girth) : Supply & plantation of trees as per specified plantation plan. This will also include excavation of pits (90cm x 90cm x90cm) ,mixing of soil additive (farm yard manure) @ 10kg per pit and garden soil, pesticides application and staking,watering etc.Tree plantation should be carried out neatly accurately as per drawing etc.and maintain the growth till handing over. Complete as directed by engineer-in-charge.

Aegle marmelos (Belpatra)TREE: (10' to 12' height & 3-5 inch girth) : Supply & plantation of trees as per specified plantation plan. This will also include excavation of pits (90cm x 90cm x90cm) ,mixing of soil additive (farm yard manure) @ 10kg per pit and garden soil, pesticides application and staking,watering etc Tree plantation should be carried out neatly accurately as per drawing etc.and maintain the growth till handing over. Complete as directed by engineer-in-charge.

Ficus Religiosa (Peepal Tree) TREE: (10' to 12' height & 3-5 inch girth) : Supply & plantation of trees as per specified plantation plan. This will also include excavation of pits (90cm x 90cm x90cm) ,mixing of soil additive (farm yard manure) @ 10kg per pit and garden soil, pesticides application and staking,watering etc. Tree plantation should be carried out neatly accurately as per drawing etc. and maintain the growth till handing over.Complete as directed by engineer-in-charge.

SHRUBBERY/HEDGE PLANTATION Datura (Dhatura) Supplying well grown shrub/hedge plants of required height (average 2' to 3') 8 nos. and planting as per drawing by providing and mixing garden soil with vermi compost (@ 250kg /100 Sqm) or mixture of decayed neem cake and tobacco powder in depth of planter as per drawing with soil pesticide & insecticide. Plants should be disease free and fungus free in 8"x 10" polythene bag. Plastic bags or pots should be removed carefully and soil around the roots should not be dropped or disturbed much. Proper watering to be done and maintain the growth till handing over complete as directed by engineer in charge

SHRUBBERY PLANTATION Calotropis gigantea (Aankhda) Supplying well grown shrub/hedge plants of required height (average 2' to 3') 8 nos. and planting as per drawing by providing and mixing garden soil with vermi compost (@ 250kg /100 Sqm) or mixture of decayed neem cake and tobacco powder in depth of planter as per drawing with soil pesticide & insecticide. Plants should be disease free and fungus free in 8"x 10" polythene bag. Plastic bags or pots should be removed carefully and soil around the roots should not be dropped or disturbed much.Proper watering to be done and maintain the growth till handing over complete as directed by engineer in charge.

GROUND COVER (Ipomea Biloba) Plant (8" height & 8-10 nos per 1 m2) : Supply & plantation of Plants as per specified plantation plan. This will also include mixing of additive @ 1kg per Sq.m. and good soil, pesticides application and staking. Plantation should be carried out neatly accurately as per drawing etc.Proper watering to be done and maintain the growth till handing over Complete as directed by engineer-in-charge.

SHRUBBERY PLANTATION Bougainvillea (2.0 mtr c/c) : Supply & plantation of Mix veriety of Bougainvillea bush 2-3 ft height 12"X12" bag (To be planted on garden ground) This will also include excavation of 450X450X450 mm pit mixing of additive @ 0.250 kg per pit and good soil, pesticides application and staking. Proper watering to be done and maintain the growth till handing over.Plantation should be carried out neatly accurately as per drawing etc. Complete as directed by engineer-in-charge. .

SHRUBBERY/HEDGE PLANTATION Cascabela thevetia (yellow Oleander) Supplying well grown shrub/hedge plants of required height (average 2' to 3') 8 nos. and planting as per drawing by providing and mixing garden soil with vermi compost (250kg / 100 Sqm) or mixture of decayed neem cake and tobacco powder in depth of planter as per drawing with soil pesticide & insecticide. Plants should be disease free and fungus free in 8"x 10" polythene bag. Plastic bags or pots should be removed carefully and soil around the roots should not be dropped or disturbed much. Proper watering to be done and maintain the growth till handing over. complete as directed by engineer in charge.

Ficus benghalensis (Banyan Tree) TREE: (10' to 12' height & 3-5 inch girth) : Supply & plantation of trees as per specified plantation plan. This will also include excavation of pits (90cm x 90cm x90cm) ,mixing of soil additive (farm yard manure) @ 10kg per pit and garden soil, pesticides application and staking. Tree plantation should be carried out neatly accurately as per drawing etc. Proper watering to be done and maintain the growth till handing over.. Complete as directed by engineer-in-charge.

Saraca asoca (Ashoka) TREE: (10' to 12' height & 3-5 inch girth) : Supply & plantation of trees as per specified plantation plan. This will also include excavation of pits (90cm x 90cm x90cm) ,mixing of soil additive (farm yard manure) @ 10kg per pit and garden soil, pesticides application and staking. Tree plantation should be carried out neatly accurately as per drawing etc. Proper watering to be done and maintain the growth till handing over. Complete as directed by engineer-in-charge.

Procuring healthy grass free from weeds and foreign materials and laying on the soil medium as turfing,the rate include for grass cost, transport to site, cost and application of manure, planting, labour, supervision and maintenance for 2 months after planting Pearl Grass

Providing material and labour for making leak proof joints in stone works for a width and depth upto 10mm , using epoxy grout mix of 0.70 kg of organic coated filler of desired shade and approved make (0.10 kg of hardener and 0.20 kg of resin per kg), including filling/ grouting and finishing complete as per direction of Engineer-in-charge.

Providing and laying 20 mm thick imported Ipe wood deck flooring panels of length 0.90 mtr-2.20 mtr & Width 70/90 mm in any approved shade for pool deck screwed to alumiminium chanels (50x25x2.5mm) with SS crews and clips as per the pattern/design approved by the Architect. The cost includes all materials, accessories, screws,clips, labour etc. complete as per the direction of Engineer In Charge. The wood panels shall be treating wood with deck oil of approved brand as per manufacturer's specifications

Supplying ,stacking and sprading of good earth (Garden Soil) including spreading simulataneously as directed. Good earth shall be a friable, tyoical of cultivated top soil of the locality. It shall be free of sub-soil, stones, earth clad, sticks roots or other objectionable extraneous materials no topsoil shall be delivered in a muddy condition, etc complete as required.

Supplying and stacking of dry farmyard manure free extraneous matterharmfull bacteria, insects and chemical on site .

MAINTENANCE After 6 Months of defect liability period the annual maintenance, there will be a 12-month maintenance period. During this period tender/ Contractor will have to maintain garden with plants in health condition. Fertilizer, Pesticides & manure in the scope of tenderer. A mixture of Ammonium sulphate, DAP & potash will need to be added in a ratio of 1:1:1@1kg of mixture for 50sqm of garden. This mixture needs to be added every quarter Farmyard manure @ 0.025 per sqm need to be added twice a year. All plant mortality due to natural causes will be in the scope of contractor. Maintenance of irrigation system is also in the scope of contractor. This will include regular servicing of pump, panels drippers & Sprinklers. Water required for plant irrigation will be in the scope of contractor. In case plant mortality the replacement will be of the same quality of earlier plant. Inspection of maintenance & billing shall be done on a month basis. Bill will have to be submitted on the 1st of every month. Tools and Tackles will be in the scope of contractor.

POINT WIRING IN COPPER (MODULAR) Note: 1. For Point wiring above 10 mtr. of length, additional length will be added at rate of mains. 2. For point wiring in bathroom and W/C and washbasin area in residential quarters reduce overall rate by 50% of point wiring for light. 3. For use of ZFLR/HFFR Copper wires in place of FRLS PVC wires add 10% in Item of Point wiring Item No 1-1-1 to 1-2-5 & 1-5-1 & 1-5-2. Point wiring for Light / Bell with 2-1.5 sq. mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in/on surface on wall/ceiling complete with 6 A Modular type switch/bell push & accessories and earth continuity of following type, erected on PVC/Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on/in wall/ceiling as per pipe erected, with necessary Lamp holder/ceiling rose/H.D. Connector as directed. With medium class Rigid PVC pipe and accessories.

Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm. (green) both are of ISI marked 1.1 KV Grade FRLS PVC insulated multistrand copper wires, in following type of pipe to be erected concealed in/flushed on wall/ceiling complete with 6A Modular type switch and hum free EME four or more step type electronic fan regulator with separately mounted and accessories with earth continuity of following type erected on PVC/Metallic box, single mounting base frame covered with textured/metallic front plate modules erected on/in wall/ceiling as per pipe erected, with necessary ceiling rose/H.D. Connector as directed. With medium class Rigid PVC pipe and accessories.

Point wiring for secondary light point with 2-1.5 sq.mm & earth wire of 1.5 sq. mm (green) both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires, in following type of pipe to be erected concealed in/flushed on wall/ceiling, complete with earth continuity and necessary connection with primary light with accessories erected on Metal/PVC box covered with 3mm thick PC (Polycarbonate)/Acrylic sheet for open/concealed wiring. With necessary Lamp holder/ceiling rose/H. D. Connector as directed. Note: - Maximum up to 6 mtrs length, excess will be considered as Mains for Secondary Point. With medium class Rigid PVC pipe and accessories.

Providing following type of Modular Type Accessories mounted with pvc/metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge. One No. SP 6 Amp.

Providing following type of Modular Type Accessories mounted with pvc/metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge. One No. 5 pin plug.

Providing following type of Modular Type Accessories mounted with pvc/metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge. Blank plate single

Providing following type of Modular Type Accessories mounted with pvc/metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge. 16 Amp. SP one way switch.

Providing following type of Modular Type Accessories mounted with pvc/metallic box covered with appropriate front plate modules erected with necessary connection. As desired by Engineer In charge. 6/16 Amp. Universal socket

Mains with 1.1 KV grade FRPVC insulated ISI marked stranded Copper conductor wire in following type of pipe to be erected concealed in / flushed on wall/ ceiling, with 1.5 sq. mm. copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size. With medium class Rigid PVC pipe and accessories. (b) 2 wire 2.5 sq. mm.

Main with 1.1 KV grade FR PVC insulated ISI marked stranded copper conductor wire in following type of pipe to be erected in / on wall / ceiling with 2.5 sq. mm copper conductor FR PVC insulated stranded wire of green colour for earth continuity of following size. With medium class Rigid PVC pipe and accessories. (a) 2 wire 4 sq. mm.

Miniature circuit breaker single pole 6A to 32A. suitable to operate on 240V. A.C. system and having breaking capacity 10 KA to be erected in existing box. Confirming to IS 8828 / 1996 with ISI Mark.

Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box having following capacity ( Cat.III ) 6 to 32 Amp.

Approved make ELCBs / RCCBs conforming to IS: 12640 and having sensitivity of 30 mA and Short Circuit withstand capacity of 6 KA and suitable for operation on 3 phase and neutral 415V. having charectorstic of quick action & tripping with all advance feature & do not incorporate any electronic component for following Max. rating erected as directed 25 Amps. FP.

Providing and erecting Sheet Steel powder coated MCB distribution board – flush/surface mounted fitted with busbar, neutral link, earth bar and DIN rail, confirming to IS 13032 and BS 5486-1986 with out MCB to house appropriate nos. of MCBs. (The DBs should be used of same company of MCB to be used). single phase incoming and horizontal single phase outgoing sheet steel double door (IP-43) 12 way

three phase incoming and single phase horizontal type outgoing Per phase isolation type (PPI) sheet steel double door 6 way

Providing and erecting metallic vetrified danger notice board for MEDIUM VOLTAGE installation to be erected as per I.S.

Providing and erecting Annealed bare Copper wire 8 to 16 S.W.G.

Providing and erecting Pipe type earthing having 150 cms.long and 2.5 cms. dia. galvanised iron pipe with coupling and buch buried in specially prepared earth pit complete with necessary 8 SWG earth wire.

Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe of following size of cables. 3 core 2.5 Sq. mm.

Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing cable trench / pipe of following size of cables. 3 core 6 Sq. mm.

Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 10 Sq. mm.

Providing and erecting XLPE (IS: 7089) (I) -88 ISI armoured cable multistrand Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps or in existing trench / pipe of following size of cables. 4 core 16 Sq. mm

Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 to 4 core 2.5 Sq. mm.

Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 to 4 core 6 Sq. mm

Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 to 4 core 10 Sq. mm

Providing and fixing heavy duty flange type brass cable gland with rubber ring for PVC insulated armoured cable complete with out going tails, insulating tape etc for following size of cables. 2 to 4 core 16 Sq. mm.

Solderless crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 1.5/2.5/4/6 Sq.mm.

Solderless crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 10 Sq. mm.

Solderless crimping type Aluminium lugs confirming to IS suitable for cable of following size evenly crimped with high pressure tool & connected to switchgear terminals with brass/cadmium plated nut bolts in an approved manner. 16 Sq. mm.

Providing and erecting Approved make Ceiling fan with double ball bearing ISI mark with condenser A.C. 230 V. 50 Cys. 1200 mm. sweep complete, canopy and 30 cms. down rod erected on existing hook or clamp with 24/0.2, 3 core flexible wire with earthing [ Make shall be approved by Engineer in charge]

Supplying and erecting approved make low noise decorative exhaust fan having size 200mm with 1350 RPM with square frame ABS body with inbuilt lowers & square frame.

Supplying and fixing of following ways surface! recess mounting, vertical type, 415 V, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 A tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCB (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 way (4 + 12), Double door

Providing and fixing of lightning conductor finial, made of 25 mm dia 300 mm long, G.I. tube, having single prong at top, with 85 mm dia 6mm thick G.I. base plate including holes etc. complete as required

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For horizontal run)

Providing and fixing G.I. tape 20 mm X 3 mm thick on parapet or surface of wall for lightning conductor complete as required. (For vertical run)

Providing and fixing testing joint, made of 20 mm X 3 mm thick G.I. strip, 125 mm long, with 4 nos. of G.I. bolts, nuts, chuck nuts and spring washers etc. complete as required.

Supply, installation testing and commissioning of Light fixtures including all civil works 10W Bollard Light

Supply, installation testing and commissioning of Light fixtures including all civil works 12W Spike Light-Ilumine Spike light

Supply, installation testing and commissioning of Light fixtures including all civil works 16W Buried Uplighter

Supply, installation testing and commissioning of Light fixtures including all civil works 30W Flood Light

Supply, installation testing and commissioning of Light fixtures including all civil works 9W Foot Lamp

Supply, installation testing and commissioning of Light fixtures including all civil works 2X25W Pole Light (570X606)mm/ Rated Voltage-240V AC/50Hz;ATHD<10%; Power Factor >0.95/ Efficacy -100(Lm/W)

Supply, installation testing and commissioning of Light fixtures including all civil works 16W Up-Down Led Wall Light

Supply, installation testing and commissioning of Light fixtures including all civil works 6W Recessed Mount LED Light

Supply, installation testing and commissioning of Light fixtures including all civil works 10W Mirror Light

20W LED Tube Light-Wide operating Voltage/Rated Voltage-100-300V AC/ 220-240V AC /50Hz; THD <10% inbuilt Surge protection:2.5kV, class-I product,IK05 ; Beam Angle- 120° ; Colour Temp as Per Interior Requirement ; Life;30,000 BH@L70B50

Providing and erecting ISI mark Medium class RIGID PVC PIPES of following size complete to be erected on/in wall or ceiling erected with necessary PVC fittings & Junction boxes fixed with adhesive solution & Clamps with following dia of pipes, in approved manner as directed. 20 mm

Supplying & erecting approved make LAN cable of following size in existing pipe as per direction. CAT - 6

Supplying & erecting M.S. box having 16 Gauge painted with red oxide or heavy duty PVC box erected flushed on wall or concealed in wall with necessary plastering & finishing as directed of following size. 100mm x 100mm x 75mm (d)

Note: 1. The proposing IP cameras to be with ONVIF conformance and to be integrated for the features with the existing Network Video Recorder/ Video Management System at premise. 2. Bidder to propose and notify required storage requirement for the BOQ camera quantity for the recording @720P x 15 FPS & 30 Days. Supply, Installation, testing and commissioning of 4MP IP IR Fixed Dome Camera with tender specifications as minimum and with all the necessary accessories for the installation

Supply, Installation, testing and commissioning of 4MP IP IR Fixed Bullet Camera with tender specifications as minimum and with all the necessary accessories for the installation

32 Channel IP Cameras support, 4 SATA Ports ( Loaded with HDD for 60 days storage), Maximum users - 20 or higher, IR Range of 100 Mtr, Ptotocols - HTTP, HTTPS, TCP/IP, IPv4/IPv6, UPnP, RTSP, UDP, SMTP, NTP, DHCP, DNS, IP Filter, DDNS, FTP, SNMP, IP Search , ONVIF 2.4, SDK, CGI trigger Events - recording, PTZ, Tour, Alarm out, video Push, Email, FTP, Snapshot, Buzzer & Screen tips, recording Mode - manual, Schedule (Regular, Continuous), MD (video detection: motion detection, tampering, video Loss), Stop, Bandwidth - 200 Mbps, ONVIF 2.0

Supply, installation, testing and commissionig of 8Port POE Switch (10/100/1000 Mbps)

Supply, installation, testing and commissionig of 6U Wall Mount Rack

Supply, installation, testing and commissionig of 20/21 inch Display with all mount & HDMI Cable

Providing and fixing 600mm x 450mm bevelled edge mirrror of superior glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden pluge with C.P. brass screws and washers.

Providing and fixing stainless steel toilet paper holder. Make: Jaquar, Kohler, Grohe, Cera high end series.

Providing and fixing C.P. ss towel rail comlete with C.P. brass/ ss brackets fixed to wooden plugs with C.P. brass/ ss scews.(B) 600mm x 20mm size.

Providing and erecting water cooler having storage capacity 80Ltr. & cooling capacity 40 Ltr.per hour @ an ambient temp of 450 C. The outlet temp. of the water should drop by 150 C within a hour, The water cooler should be comprising of hermetically sealed compressor, fan motor, condensing unit, water tank surrounded by evaporating coil, thermostats, relay etc. complete with necessary inlet & outlet connection. The body of water cooler will be made from Stainless Steel.

Supplying & erecting 5 stage single reverse osmosis water purification system with M.S. powder coated frame, pre filter housing with 'O' ring pre sediment filter GAC filter, carbon filter suitable buster DC pump capacity 80 psi, mention with 40 Osg inline type post carbon filter auto low & high pressure switches with following size of storage tank & LPH capacity & erected as directed with one year comprehensive maintenance guarantee. [B] 25 Ltr / Hr with 30 Ltr. S.S. Pressure Tank

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [B] 20 mm. Make: Astral, Supreme, Finolex, Prince

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [C] 25 mm. Make: Astral, Supreme, Finolex, Prince

Providing and fixing center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [D] 32mm. Make: Astral, Supreme, Finolex, Prince

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and floor etc. complete. [F] 50mm. Make: Astral, Supreme, Finolex, Prince

Providing laying and jointing in true line and level 40 mm dia. U.P.V.C. Pipe ( SCH- 80) for cold water including fittings. This includes jointing of pipes & fittings with one step UPVC solvent cement, trenching, refilling & testing of joints, including cost of all materials complete as per direction of Engineerin- Charge. Make: Astral, Supreme, Finolex, Prince (pumping line)

Providing and supplying ISI mark CI D/F Butterfly Valves as per IS:13095 (Latest Edition) of PN 10 and 50 mm diameter including all taxes, insurance, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to departmental stores, stacking etc. complete.

Providing and fixing Gun metal check or non-return fullway wheel valve.(E) 40mm dia.

Providing erecting and fixing double coated SIntex or equivalent PVC. (ISI) water tank of required capacity each with all necessary fittings and connection etc. complete on terrace. (Make: Sintex / Kaka )

Providing, laying and jointing in true line and level 110 diametre U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Construction of Manhole chambers(Inspection chambers) 600mm X 600 mm and depth 1.0 m in brick or bela stone masonry, locally available in C. M. 1:6. Foundation concrete 150 mm thick in C. C. 1:4:8 of trap metal size 25 mm to 40 mm thick, inside cement plaster in C. M. 1:3 and cement pointing outside in C. M. 1:3 and top cover of precast RCC slab 100 mm thick (with key hole in two parts, each with handles or MS Bar etc. complete as given size) Upto 1 Mt. depth from G. L. to pipe invert level incl. complete civil works but excl. cost of excavation and refilling, with cast in situ RCC slab in one single piece with fixing of CI-MH Frame and cover (incl. cost of CI-MH Frame and cover) with 23 mm thick brick masonry wall in C.M.1:6. With precast slab in two parts 15mm.

Providing and fixing in position cowel went to pipes.(C) 100mm dia

Providing and fixing floor mounted, white vitreous china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge.

Providing and fixing white vitreous china wash basin including making all connections but excluding the cost of fittings : Flat back wash basin of size 550x400 mm

Providing and fixing PTMT towel ring trapezoidal shape 215 mm long, 200 mm wide with minimum distances of 37 mm from wall face with concealed fittings arrangement of approved quality and colour, weighing not less than 88 gms.

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : 25 mm nominal bore

Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 15mm nominal bore

Providing and fixing PTMT soap Dish Holder having length of 138mm, breadth 102mm, height of 75mm with concealed fitting arrangements, weighing not less than 106 gms.

Providing, laying and jointing in true line and level 50mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, laying and jointing in true line and level 75mm diameter U.P.V.C (Type B) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. (Make: prince/ supreme / astral / finolex)

Providing, laying and jointing in true line and level 110 mm diameter U.P.V.C (Type A) conforming to IS 13592-1992 with one end plain and other end socketed with rubber ring, & fittings conforming to ISI 14735-1999 of approved make for drainage system pipe line, pipe shall be jointed with each other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size 110 mm diameter x 149 mm length x 145 mm height at every 2000 mm center to center or shall be concealed in walls as directed including necessary fittings such as bends, shoes etc. including testing of pipes and joints and jointed with adhesive solvent cement including cost of all materials. Make: Astral, Supreme, Finolex, Prince

Providing, fixing and testing PVC Deep seal Multi Trap of 110 X 110 mm dia diameter, with necessary distance piece of 75mm dia pipe and 150 x 150mm heavy duty Stain less Steel three piece grating(Anti cocroch), making necessary holes and cutting in Slab/Walls, etc complete as per engineer in charge. (Make: prince/ supreme / astral / finolex)

SITE DEVELOPMENT- PUMPROOM, PERCOLATION WELL, IRRIGATION Supply, installation, testing and commissioning of Water Fountain including all SS Crown Fountain 10ft OD 3 (3Pcs. Falnged Joints) Inlets 70Nos 1/4" SS Collars welded, evenly distributed in a gap of 5" 70nos Brass chrome plated 1/4" adjustable clear stream jets. ; 2hp/3ph Submersible Pump with Cast Iorn body, Impeller of Noryl and shaft with SS.Total Head :8-14Mtr, Discharge:11-7 LPS Make: Kirloskar; Necessary pipes, Valves, Fittings, cables, Starter etc and other accessories

Sarjan Construction Pvt Ltd