REPAIRS TO LEAKAGE SEEPAGES PUMBING CEMENT PLASTER FLOOR TILING WATER TANKS CLEANING DAD RESIDENTIAL AND OFFICE ESTABLISHMENT UNDER GE SOUTH BANGALORE

Amount

Demolition of un- reinforced cement concrete in ground floors and pavings not exceeding 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 mixed with water proofing compound 3% by weight of cement wherever required for floors and sides of wall in sunken floors, finished even and smooth without using extra cement complete all as specified and directed.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for applying one coat of NITTO proof to sides and bottom of sunken floors, complete all as specified and directed.

S&F polythene film, black 50 micron thick laid in floors complete all as specified and directed.

M&L for PCC 1:5:10 type E2 (using 40mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and directed.

M&L for 30mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) in floorings including finishing the surface even and smooth without using extra cement complete all as specified and directed.

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing) and removing servicebale tiles to stores and rubbish off the premises complete all as specified and as directed.

S&F glazed ceramic tiles in vertical surface 300x 200x 7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match etc including 10 mm thick backing coat in CM 1:4 complete all as specified and directed.

S&F non-skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:6 complete all as specified and directed.

S&F in repair in patches light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles n. exc 0.36 Sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile including 15 mm thick screed bed in cement mortar 1:4 complete all as specified and directed.

M&L for machine cut cudappah stone slab 22mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing over 15 mm thick screed bed in cement mortar 1:6 complete all as specified and directed.

M&L for granite (of any type) tiles 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing complete over a screed of 15mm thick in CM 1:6 complete all as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps,cooking platform, and other similar situations complete all as specified and directed.

Taking down and refixing of old GI tubing 20 mm bore with necessary connection including new fittings, in new or old position in wall, ceiling and floor complete all as specified and directed.

Supplying and laying of CPVC pipes 20 mm dia SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including taking down old unserviceable GI tubing complete all as specified and directed.

S&F 20 mm dia CPVC brass elbow complete all as specified and as directed.

S&F 20 mm dia CPVC Brass Tee complete all as specified and as directed.

S&F bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges:large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165 complete all as specified and directed.

S&F in repair vitreous china squatting pan Orissa pattern size 580 x 440 mm white with front or back inlet, integral foot rest including CI 'P' or 'S' trap with providing lime concrete bedding and connecting to flusing cistern complete including breaking up existing damaged WC seat and connecting flush pipe etc and making good to floor complete all as specified and directed.

S&F in repair vitreous china wash down water closet pan (pedestal pattern) white including plastic water closet sheet cover white, closed pattern with flat bottom, with mild steel chromium plated or aluminised hinging device and including mild steel chromium plated jet fixed to water closet with 15mm dia and 1.2m to 1.5m long flexible pipe complete complete all as specified and directed.

S&F in repair plastic seat cover white for water closet pedestal pattern closed patter with flat bottom fixed with mild steel chromium plated or aluminium hinging device complete all as specified and directed.

S&F in repair PVC white low level flushing cistern 10 ltr capacity with all fittings syphonic action with inlet ball valve and float including flush pipe, ball valve, handle, bracket PVC short bend etc. complete all as specified and directed .

S&F in repairs PVC connection 15 mm size, 45 cm long with PTMT adopter,check nuts and washer on both sides complete all as specified and directed.

S&F in repair PVC flush pipe 32 mm bore high density for low level flushing cistern including all joints, washers suitable for Indian type and Pedstal type WC complete all as specified and directed.

S&F in repair, bib taps, cast copper alloy, with crutch or butterfly handles, screwed down, screwed for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair, bib taps, brass, fancy type, long body, chromium plated for 15 mm bore GI pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair 15 mm bore bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-90gms). complete all as specified and directed.

S&F in repair pillar taps, brass, with capston heads, fancy type, chromium plated, screwed down high pressure with or without lettered 'Hot' or 'cold' with long screwed shanks and flynuts screwed for 15mm bore iron pipe complete all as specified and directed.

S&F in repair 15 mm bore pillar tap standard of PTMT any colour high pressure screwed for iron pipe and fixed. (Minimum weight 15mm-110gms) complete all as specified and directed.

S&F in repair stop valves 15 mm nominal bore, brass, fancy type, chromium plated, screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipes or for unions complete all as specified and directed.

S&F in repair angle valves 15 mm nominal bore, brass, chromium plated complete all as specified and directed.

S&F in repair stop valves 15 mm nominal bore, brass, fancy type, chromium plated with long shank and cup (concealed type), screwed down, high pressure with crutch or butterfllly handles, screwed both ends for iron pipe or for brass ferrule or to GI socket complete all as specified and directed.

S&F in repair 125 mm size Brass chromium plated shower roses with swivel joints, including fixing to steel pipe or union complete all as specified and directed.

S&F in repair health faucet jet of 15mm bore incl 1.00m long PVC Pipe and flanges fixed to stop cock complete all as specified and directed.

S & F in repairs PVC (SWR) Floor trap/Nahani Trap of 75 mm outlet plain with grating including jointing with solvent cement.

S&F in repair brass chromium plated grating 125 mm dia circular with centre hole/ without hole of approved make and fixing with cement mortar 1:3 on Nahani trap or floor trap complete all as specified and directed.

S&F in repair PVC (SWR) pipes 110mm dia single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F in repair PVC (SWR) pipes 75mm dia single socketed in any length with rubber ring joints fixed to walls etc complete all as specified and directed.

S&F in repair PVC bends any radius 75mm dia complete all as specified and directed.

S&F in repair PVC bends any radius 110mm dia complete all as specified and directed.

S&F in reapir PVC bends any radius 110 mm dia with access door complete all as specified and directed.

S&F in repair PVC bends any radius 75 mm dia with access door complete all as specified and directed.

S&F in repair PVC Single T any radius 110 mm dia with access door complete all as specified and directed.

S&F in repair PVC Single T any radius 110 mm dia complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm branch piece,double (double Y) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm branch piece,double (double Y ) equal or unequal complete all as specified and directed.

S&F in repair PVC (SWR) 75 mm vent cowl complete all as specified and directed.

S&F in repair PVC (SWR) 110 mm vent cowl complete all as specified and directed.

Cutting holes into or through brick walls built , in cement mortar or cement lime mortar and stone walls built in lime mortar or walls of lime concrete of superficial area exc 150 Sqcm but n.exc 400 Sqcm complete all as specified and as directed.

S&F 500 ltr capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including taking down the existing unserviceable one complete all as specified and directed.

S&F 1000 ltr capacity rotational moulded polyethylene water storage tanks (cylinder vertical with class top) hoisted and fixed in position including taking down the existing unserviceable one complete all as specified and directed.

S&F in repair 20 mm dia gun metal, globe or gate valve with iron wheel head screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair 20 mm bore ball valve high pressure of PTMT with epoxy coated Aluminium rod & high density plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm-210gms) complete all as specified and directed.

S&F 20 mm bore nipple suitable for HDPE water tank. (Min wt 45 gms) complete all as specified and directed.

S&F in repairs HDPE PVC lid (cover) for 500/1000 ltrs capacity PVC tank complete all as specified and directed.

Dismantling mangalore pattern roofing tiles with ceiling tiles or slate roofing & similar work complete all as specified and directed.

M&L for mild steel works in framed brackets of angle iron including all necessary cutting ,welding,drilling holes etc complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for cutting chases, pinning in making good to facings where required and pointing in CM 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring,etc., and making good, cutting not exc 10 cm girth complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

Removal of vegetation/tree growth etc on external surface of walls or on roof top in two/four storey building by taking all necessary precaution to the workers and also the adjacent govt properties including digging out of filling holes with PCC 1:2:4 type B1 using (20 mm graded stone aggregate) and finishing the surface to match adjacent surfaces after application of suitable chemical using " break" manufactured by M/S denocil company or equivalent to avoid re growth of the vegetation and removing the debris to outside the MD land complete all as specified and directed. Note:- Any damage to the adjacent govt properties like glass windows, pipes lines etc to be made good without any extra cost. (a) For plants of girth not exc 5 cm.

All as per item no.63 here-in-before for plants of girth exc 5 cm and n.exc 15 cm.

sree veerashwara constructions