SPECIAL REPAIR TO BLDG NO P-40 (MD OFFICER QTR) AT JDC SATWARI UNDER GE SATWARI

Amount

B&R PORTION:- Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and directed.

Taking down cement plaster of any description on brick or stone walls or from concrete surface including raking out joints, hacking for key, scrubbing down with water etc ,and removing unserviceable material outside the premises. complete all as specified.

Vitrified digital ceramic (double charged) any shade tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15 mm thick screed bed in C:M 1:4, complete all as specified. Note:- Sample of tiles as approved & kept in GE's sample room. The contractor are directed to visit the sample room before quoting the rate for this item.

Description all as per item No-03 but as in verical surfaces such as dado / skirting over & including a backing coat of cement plaster 10 mm thick in CM 1:4, complete all as specified.

Non - skid digital, anti scratch, anti fungus, ceramic joint less coloured tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles over & including 15mm thick screed bed in C:M 1:4, complete all as specified. Note:- Sample of tiles as approved & kept in GE's sample room. The contractor are directed to visit the sample room before quoting the rate for this item.

Glazed digital ceramic tiles of size 450x300x7 mm thick in vertical surfaces, set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of tiles over & including 10 mm thick plaster in CM 1:4, complete all as specified. Note:- Sample of tiles as approved & kept in GE's sample room. The contractor are directed to visit the sample room before quoting the rate for this item.

25 mm thick PCC 1:2:4 type B-1 using 12.50 mm crushed stone aggregated as in floor finished the surface rough to receive the top finished, complete all as specified.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) nexc 1.5 sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed By Engr-in-charge.

Taking down chowkats or frames with shutter (with out taking off shutter from the frame) exc 1.5 sqm & n. exe 4 sqm each including cutting holes for taking out hold fast or dismantling brick work (holes cut and any other damage to jambs, walls for taking out hold fast shall be finished identical to existing finish without any extra cost to Govt.), complete all as specified and directed By Engr-in-charge.

Taking down shutters of any description exc 1 sqm and n.exc 2 sqm each etc complete all as specified and as directed.

Taking down & refixing shutter of any description exc 1 sqm but n exc 2 sqm each in same opening etc complete all as specified and as directed

Pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates including lugs, hold fast, lock strike plate etc complete of size 105 x 60mm including one coat of red oxide primer and bituminous paint on back side & hold fast, complete all as specified.

Pressed steel frames made of size 1.25mm thick MS steel for door with one or more rebates including lugs, hold fast, lock strike plate etc complete of size 125 x 60mm including one coat of red oxide primer and bituminous paint on back side & hold fast, complete all as specified.

PCC 1:3:6 type C-0 (using 12.5mm crushed stone aggregate) as in for back filling in pressed steel frame & fo fixing hold fast including necessary use and waste of form work etc complete all as specified and as directed

35mm thick, flush shutters, solid core construction, with block board core and plywood face panels commercial type on both sides complete all as specified and as directed by the Engineer-in-Charge.

35mm thick 2nd Class hard wood glazed / gauzed and skelton shutters open rebeated and prepare to recive glass/ gauze but divided into square with plain chamfered or rounded mitred and rebated sash bars stiles and rails as specifed in SSR Part-I Sec 8 clause 8.24 (a), complete all as specified and as directed by the Engineer-in-Charge.

Locally fabricated 35 mm thick IInd class HW partly paneled & partly gauged & skeleton shutters open rebated and prepared to receive glass/gauge etc. (without sash bars) edges of framing plain chamfered or rounded fitted with cut & mitered beads for security glass/gauge etc. size of members of shutter as specified in SSR Pt I sec 8 Cl 8.24 (a), complete all as specified and as directed.

Soild PVC door frame of size 50mm x 47mm made out of 5 mm plain coloured PVC sheet, reinforced with MS square tube supplying and fixing in opening as per specification and drawing, complete all as specified and as directed by the Engineer-in-Charge.

Factory made solid panel PVC door shutter 30 mm thick ( style ) consisting of frame work made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour P.V.C‘ C’ channel having a PVC sheet strip 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail lock rail and bottom rail on either side and as gap inserts for top rail; and bottom rail paneling of plain, colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles and rail with suitable PVC sheets beading and jointed together with solvent cement S&F in frame at site as per specification, complete all as specified and as directed by the Engineer-in-Charge.

18/19 mm thick MDF board as in shutters/shelves etc exterior grade prelaminated one side with decorative choice lamination and other side balancing white lamination fixed to frame work with leaping around the shutter and fix with screws to etc complete all as specified and directed.

External teack wood lipping 6mm thick and 19/20mm wide fixed with nails on edges of pelmet boxes incuding wooden polishing on beading etc complete all as specified and as directed.

Butt hinges extruded aluminium alloy with galvanised mild steel hing pin anodised and fixed type C-21, 100 mm size, complete all as specified and as directed.

Aluminum handles cast type anodized 100 mm size etc. complete all as specified and as directed.

Aluminum handles cast type anodized 125 mm size etc complete all as specified and as directed.

Aluminum anodized barrel tower bolts of extruded section (ISI Marked) & fixed 150 mm long etc complete all as specified and as directed.

Aluminium anodised, barrel tower bolts size 200 mm of extruded section (ISI Marked) and fixed complete all as specified.

Aluminium alloy, anodised, sliding door bolt (ISI Marked) of size 250 mm with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed cpmplete all as specified.

Floor door stopper fixed complete all as specified. Make:- Prayag, Cat No- 5121 or equivalent cat part of IS Make as approved by GE.

Magnet door catcher fixed in repairs, complete all as specified. Make:- Prayag, Cat No- 5124 or equivalent cat part of IS Make as approved by GE.

225mm, ordinary rat tail rod patttern springs includding roller and roller plate etc. fixed in repairs, complete all as specified and as directed.

20 mm outer dia stainless steel drapery rod thickness 20 gauge and for every 01 RM length, provide 10 numbers stainless steel wings (Model No:- SS CRNG of Vista) with 50 mm dia and proportionate for part there off, with stainless steel brackets, near to ends with stainless steel finials adapter for 20mm dia drapery rod at both ends fixed in repairs complete all as specified. Note:-The drapery rod shall be projecting 150 mm outer side from the clear opening of doors/windows.( Including necessary fittings).

Box type Steel windows comprised of tubular frame and shutters made out of 1.25mm thick MS steel tube factory made with double side shutters wire gauged shutter & glass glazed shutter (wire and glass panes shall be measured and paid separately ) with side hung shutters with steel handle and steel peg stay dovetailed ot welded including 2 Nos tower bolts 150mm long for each leaf and 8mm square bar grills at spacing as shown on drg welded to FI frame work, including other fittings, hinges, handles tarred hold fasts PCC blocks etc. all as shown on drg No CEPZ /TD-354/09 sheet 1/3 to 3/3 complete.

3 mm thick sheet glass ordinary quality glazing with steel pins,oil putty to steel windows and, beads nails etc to wooden surfaces as in square exc 0.50 sqm in each pane, complete all as specified.

3 mm thick sheet glass, ordinary quality and glazing with wooden beads in square n. exc 0.5 Sqm in each pane or glazing with oil glass putty including hacking out old broken glass from wooden or steel frame surround fixed in repairs, complete all as specified and as directed.

3 mm thick figured glass, pin head type and glazing with oil putty in square n.exc 0.5 sqm in each pane, complete all as specified and as directed.

Galvanized mild steel wire cloth 0.456mm nominal dia of wire and average width of aperture 2.0mm and fixed with tinned tank or galvanized wire staple complete all as specified and as directed.

Galvanized mild steel wire cloth 0.456mm nominal dia of wire and average width of aperture 2.0mm and fixed with tinned tank or galvanized wire staple, fixed in repairs, complete all as specified and as directed.

Applying two coat of synthetic enamel paint over a coat of red oxide primer on new steel surfaces of any description having width/girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth complete all as specified.

Applying two coat of synthetic enamel paint on new wooden surfaces of any description over a coat of pink primer having width/girth exceeding 10 cm including preparation and necessary filling by chalk putty as and where requered to make surface even and smooth, complete all as specified.

Demolition of brick work built in cement mortar or cement lime mortar incl all quoins, arches pillars etc and removing unserviceable material exc 100 mtr complete all as specified.

Demolition of cement concrete (unreinforced) ground floor and pavings n exc 15 cm thickness (below or above ground level ) and removing unserviceable material exc 100 mtr complete all as specified.

Demolition of reinforced cement concrete of any discription (slab, chimeny etc) ground and removing unserviceable material exc 100 mtr complete all as specified.

Brick work with sub class ‘B’ bricks old size straight or curved on plan to any radius in half brick thick wall built in cement mortar (1:4) etc complete all as specified.

Brick work with sub class ‘B’ bricks old size straight or curved on plan exc 6 M radius built in cement mortar (1:6) , complete all as specified.

Precast cement concrete type B-1 using 20 mm graded stone aggregate as in landings, cover slabs (for manholes etc.) chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in CM(1:4) complete all as specified.

Mild steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed. all as specified and directed.

18 to 20 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, over 15 mm thick CM 1:4 complete all as specified & directed by Engr-in-charge.

Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified.

75mm thick PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate as in floor/ plinth protection laid in alternate bays finished even and smooth without using extra cement including joints filling by using mastic filling comprising one part of bitumen 85/25 mixed with three parts of coarse sand by weight complete all as directed.

Rendering 15mm thck in CM 1:3 or Plain Cement Concrete 1:2:4 type B-0 as in sunken floors without extra cement on walls/floors and including mixing of water proofing compound complete all as specified. (WPC shall be measured and paid separately).

Preparation of surfaces of any description thoroughly with wire brush & clean the dust by vacuum cleaner, the surface must be sound & free from dirt, dust & loose particals & wash the surface with water. Oil & grease must be removed using degresing solvents. Any damage surface must be repaired by using polymer modified repair mortar with Dr. Fixit Pidicrete URP. Clean the surface again & saturated with water and remove the excess water, if any and bring to touch dry state. Applying the first coat of the mixed (@ 0.75 Sqm/Kg, 1 mm thick for 2 coats) Dr Fixit Pidifin 2K on the prepared surface & allow to dry for 4 to 6 hours. Prepare amother batch batch of Dr Fixit Pidifin 2K and apply 2nd coat in direction 90 digree to first coat. Overlay protected screed, using cement sand 1:3 along with Dr Fixit LW+ complete all as apecified.

Cement concrete type E-2, 1:5:10 ( 40 mm graded crushed stone aggregate) in Sunkan filling and mass concrete complete all as specified and directed by Emgr-in-charge.

25 mm dia G I tubing medium grade galvanised laid over floors as a spout pipe in sunken floors, complete all as specified.

Central hole basin mixer without popup waste system with 450mm long braided hoses, cast copper alloy, chromium plated fency type fixed in repairs, complete all as specified. Make:- Jaquar, Cat No- CQT-23167B or equivalent cat part of make as specified in Appx-"F" of CA.

Wall Mixer with provision for overhead Shower with 115mm long bend pipe on upper side, connecting legs & wall flanges fixed in repairs, complete all as specified. Make:- Jaquar, Cat No:- CQT-23273UPR or equivalent cat part of make as specified in Appx-"F" of CA.

Sink Mixer with swinging casted round shape spout (Wall mounted Model) with connecting legs & wall flanges fixed in repairs, complete all as specified. Make:- Jaquar, Cat No- CQT-23309 or equivalent cat part of make as specified in Appx-"F" of CA.

Bib Cock with wall flange cast copper alloy, chromium plated fency type screwed for iron pipe, 15 mm bore fixed in repairs, complete all as specified. Make :- Jaquar, Cat No:-CQT-23047 or equivalent cat part of make as specified in Appx-"F" of CA.

Angular stop cock with wall flange, cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe fixed in repairs, complete all as specified. Make:- Jaquar, Cat No:- CQT-23053 or equivalent cat part of make as specified in Appx-"F" of CA.

Angular stop cock two way with wall flange, cast copper alloy, chromium plated fency type screwed for 15 mm iron pipe fixed in repairs, complete all as specified. Make:- Jaquar, Cat No:- CON-053KN or equivalent cat part of make as specified in Appx-"F" of CA.

Exposed Part Kit of concealed Stop cock & Flush cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083, ALD-089 & ALD-081) fixed in repairs, complete all as specified. Make:- Jaquar, Cat No:- OPP-15083KPM or equivalent cat part of make as specified in Appx-"F" of CA.

Regular Body of concealed Stop cock suitable for 15 mm pipe line with Protection Cap (without Exposed Parts) fixed in repairs, complete all as specified. Make:-Jaquar, Cat No:- ALD-083 or equivalent cat part of make as specified in Appx-"F" of CA.

Cromium plated, single towel rail 600mm long fixed in repairs, complete all as specified. Make:- Jaquar, Cat No:- ACN-1111BNM or equivalent cat part of make as specified in Appx-"F" of CA.

Cromium plated, Shop dish holder, complete all as specified. Make:- Jaquar, Cat No:- ACN-1131N or equivalent cat part of make as specified in Appx-"F" of CA.

Cromium plated toilet roll holder fixed in repairs, complete all as specified. Make:- Jaquar, Cat No-AKP-35751P or equivalent cat part of make as specified in Appx-"F" of CA.

Glass shelf 600mm long fixed in repairs, complete all as specified. Make:- Jaquar, Cat No- AKP-35771P or equivalent cat part of make as specified in Appx-"F" of CA.

Corner Glass Shelf (with Bracket) fixed in repairs, complete all as specified. Make:- Jaquar, Cat No- ACN-1173, or equivalent cat part of make as specified in Appx-"F" of CA.

Cromium plated hand shower (health faucet) with 8mm dia 1.20m long flexible tube and wall hook fixed in repairs, complete all as specified. Make :- Jaquar, Cat No- ALD-573 or equivalent cat part of make as specified in Appx-"F" of CA.

450mm long braided hose with two 15mm nuts & rubber washers (both side) without nipple (suitable for Geysers) fixed in repairs, complete all as specified. Make :- Jaquar, Cat No- ALD-805B or equivalent cat part of make as specified in Appx-"F" of CA.

450mm long braided hose with M10X1 nipple, 15mm Nut, O-ring & rubber washer (suitable for basin mixers) fixed in repairs, complete all as specified. Make :- Jaquar, Cat No- ALD-803AB or equivalent cat part of make as specified in Appx-"F" of CA.

Overhead Shower 100mm dia round shape single flow (ABS body chrome plated with gray face plate) with rubit cleaning System, fixed in repairs, complete all as specified. Make :- Jaquar, Cat No- OHS-1989 or equivalent cat part of make as specified in Appx-"F" of CA.

Shower Arm casted 190mm long light body Round shape for wall mounted showers with flange & 100 mm long CP nipple fixed in repairs, complete all as specified. Make:- Jaquar, Cat No- SHA-477 or equivalent cat part of make as specified in Appx-"F" of CA.

Wall hung basin with fixing accessories set, size : 560 x 430 x 185mm, including cuppling and pvc waste pipe fixed in repairs, complete all as specified. Make :- Jaquar, Cat No- CNS-WHT-811 or equivalent cat part of make as specified in Appx-"F" of CA.

Full pedestal for WHB Cat No- CNS-WHB-811 complete all as specified. Make :- Jaquar, Cat No- CNS-WHT-303 or equivalent cat part of make as specified in Appx-"F" of CA.

Vitreous china wash down water closet white, Size(365x560x400mm) with 'S' or 'P' trap, including soft closing seat cover , closed pattern with flat bottom along with fixing accesories, fixed in repairs, complete all as specified. Make:- Jaquar, Cat Part No- CNS-WHT-551PN or equivalent cat part of make as specified in Appx-"F" of CA.

Jet Spray (Stainless Steel) with 1 meter PVC Tube fixed in repairs, complete all as specified. Make:- Jaquar Essco, Cat No- ALE-547 or equivalent cat part of make as specified in Appx-"F" of CA.

WC Orissa pattern white with integral foot rest 585x 445 mm including L bend, & PCC bedding in 1:2:4 and making good disturbed floor connecting to trap and flush pipe fixed in repairs, complete all as specified. (Rate of including in taking out and removal of old WC seat unhygienic condition) Make:- Jaquar ESSCO, Cat Part No- ECS-WHT-451LE or equivalent cat part of make as specified in Appx-"F" of CA.

Wall Hung Cistern with drainage L-bend pipe with gasket & Installation Kit (Suitable for EWC) fixed in repairs, complete all as specified. Make:- Jaquar, Cat No- WHC-WHT-184L or equivalent cat part of make as specified in Appx-"F" of CA.

10 ltrs capacity PVC low level flushing cistern, ISI marked of make specified with inlet, float valve and handle including bracket with 32 mm dia PVC pipe 600 mm long fixed in repairs, complete all as specified and as directed.

Pillar taps 15mm dia, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe fixed in repairs, complete all as specified. Make:- Jaquar, Cat No-CON-011KN or equivalent cat part of make as specified in Appx-"F" of CA.

Vitreous china wash basin flat back size 550 mm x 400 mm fixed on existing CI brackets with 32mm dia brass waste coupling fixed in repairs, complete all as specified.

Stainless steel gratings of outer frame dia 100 mm openable type incl all necessary fittings such as hinges including embeding in tiles with white cement fixed in repairs, complete all as specified.

Taking down GI tubing of 15 mm dia and connection and including cleaning for refixing or removel, complete all as specified.

Taking down GI tubing of 20 mm dia and connection and including cleaning for refixing or removel, complete all as specified.

15 mm dia galvanized pipes medium grade with all fittings and fixed complete wall and ceiling or laid in floors, including one coat of bitumen on GI pipe, complete all as specified.

20 mm dia galvanized pipes medium grade with all fittings and fixed complete to wall and ceiling or laid in floors, including one coat of bitumen on GI pipe, complete all as specified.

Fixing only old 15mm dia bore steel tubing and connections in new or old position fixed to wall, ceiling or laid in floor with new fittings etc, complete all as specified.

Fixing only old 20mm dia bore steel tubing and connections in new or old position fixed to wall, ceiling or laid in floor with new fittings etc complete all as specified.

Dismantling / disconnecting / demolition of water storage tank of any type or description (RCC/PVC/Bricks etc) cap 500/1000 Ltr and refixing in same position or removing from site, as per direction Engr-in-Charge.

Rotational moulded polythylene water storage tank with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 1000 ltrs including making connections complete all as specified.

Rotational moulded polyethylene water storage tanks with float valve, plastic lid cover, triple layered, cylindrical vertical with closed top hoisted and fixed in position of capacity 500 ltr including making connection completed all as specified.

Stop valves, (ISI Marked) sutable for 20 mm bore pipe cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed in repairs, complete all as specified.

Float valves high pressure of PTMT with epoxy coated Aluminium rod and high density plastic ball screwed for iron pipe of bore 20mm including necessary fittings (Min weight 210gm), complete all as specified.

Mild steel framed work such as grills, gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; frame work of water tanks and similar work confirming to Fe-290 Gde-E-165, complete all as specified.

Complete removal of existing water proofing treatment of any description including tiles, mud faska (any type), grubbing up of tree roofs, under layer, taking down of cement plaster / demolition of cement concrete any thickness and preparation of concrete surfaces by scrubbing down with steel brushes and cleaning with water to remove all loose dirt / dust etc complete all as specified.

Plain cement concrete 1:2:4 type B-1 using 20mm graded crushed stone aggregate as in roof padding, mass concrete and similar work complete all as directed by Engr-in-Charge

P.C.C 1:2:4 type B-0 using 12.5 mm graded stone aggregate as in coping or roof kerbs on roof chamfered on edge including troweling slightly complete all as specified and directed.

Roof plaster 15 mm thick in cement mortar 1:4 mixed with water proofing compound as per manufacturer's instruction, finished even and smooth without using extra cement over cement slurry over existing roof @ 3 kg/sqm complete all as specified and directed. WPC shall be meashured and paid seperatly.

Supply only liquid water proofing compound ISI marked Make : DR Fixit complete all as specified and directed.

Cutting out cracks to V-section in existing roofs or terracing etc cleaning out, wetting, grouting with cement and sand slurry 1:3 complete all as specified.

Cutting grooves in brick wall 75mm wide and 65mm deep and shaping horizontal face of groove with cement mortar 1:3 complete all as specified and as directed.

Applying a coat of bituminous primer conforming to IS-3384 @ 0.3 ltr per sqm on prepared surface of roof slab after drying of primer apply a coat of hot blown 82/25 graded bitumen conforming to IS-702 @ 1.2kg /sqm on plaster surface and provide APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on primed surface by forced torched application both on floor as well as on wall of parapet, including bituminious alumunium paint on APP roof treatment, complete all as specified.

Taking down CI/PVC pipes 100 mm dia including all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI/PVC pipes 75 mm dia including all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Taking down CI/PVC pipes 50 mm dia including all fittings like bend, branch pieces, connectors, heel rest bend etc all as specified and directed.

Cast iron,100 mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall, complete all as specified.

Cast iron, 75mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall, complete all as specified.

Cast iron, 50mm internal bore,sand cast type, soil, waste and vent pipes in any length with or without ears, with cement joints, fixed to wall, complete all as specified.

Cast iron cowls, sutable to fix in 50 mm dia pipe, complete all as specified.

CI Reducer 100 to 50 mm internal bore, sand cast type fixed in repair, complete all as specified.

100 mm bore, branch pieces, single Tee (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches , including oval access door fixed in repairs, complete all as specified and directed.

75 mm bore, branch pieces, single Tee (equal or unequal), ordinary or inverted (spigot or socket type) or with parallel branches , including oval access door fixed in repairs, complete all as specified and directed.

75mm Cast iron floor trap, with grating including jointing to waste pipe fixed in repairs in cement concrete type B-1 (1:2:4), complete all as specified and directed.

PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement complete all as specified.

Sinks made of stainless steel 1.00 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete with waste coupling & PVC waste pipe fixed in repairs, complete all as specified and directed by Engineer-in-charge.

Rendering 15 mm thick in CM 1:6 on other than fair face of brick work / stone wall surfaces finished even and smooth with out using extra cement complete all as specified.

Rendering 15 mm thick in CM 1:4 on fair face of brick work / concrete surfaces of wall & finished even and smooth without using extra cement, complete all as specified. Note:-Please note that all necessary scaffolding, lifting arrangement for three story building on external surfaces shall be inclussived in quoted rate.

Material and labour for rendering 05mm thick in CM (1:3) as in ceiling finished even and smooth without using extra cement, complete all as specified.

Repairing of concrete surfaces such as correction of chajjas, upward facia, downward facias, ceiling and similar items with plain cement concret 1:2:4 type B-0 or rendering 10mm thick in CM 1:3 includind dubbing coat without using extra cement finished even and fair including necessory formwork and scaffolding up to fourth storey bldgcomplete all as specified and directed.

Preparation of new plastered surfaces of walls, & applying two coats of oil bound distemper and one coat of approved primer over two coat of wall care putty of 2 to 3 mm thick, complete all as specified.

Preparation of new plastered / concrete surfaces of walls, and applying two coat of cement based paint over one coat of primer complete all as per specified and directed by Engr-in-charge.

Preparation of new concrete / plastered /un-plastered surfaces of ceilling, applying two coat of white wash on ceiling, complete all as specified.

Preparation of old concrete/ plastered surfaces of ceilling & applying one coat of white wash on ceiling, complete all as specified.

Applying three coats of white wash on wall including preparation of newly plastered surfaces complete all as specified & as directed.

Applying one coat of synthetic enamel paint on old painted steel surfaces of any description having width / girth exceeding 10 cm including preparation and rubbing with sand paper to make surface even and smooth and apply putty and primer where required complete all as specified.

Applying one coat of synthetic enamel paint on old painted wood surfaces of any description having width/girth exceeding 10 cm including preparation and where requered to make surface even and smooth, complete all as specified.

Preparation of old plastered surfaces of walls & applying two coats of oil bound distemper and a coat of approved primer over a coat of wall care putty of 2 to 3 mm thick complete all as specified.

Preparation of new plastered/concreat surface of wall, chajja, facia, face of columns, beam etc and applying two coat of weather proof exterior emulsion (APEX) with necessary scaffoding including necessary filling of wall care putty on uneven surface as and where required all as specified.

Preparation of old decorative plastered/concrete surface of wall, chajja, facia, face of columns, beam etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots & rubbing with sand paper and applying one coat of weather proof exterior emulsion (APEX) with necessary scaffoding including necessary filling of wall care putty on uneven surface as and where required all as specified.

Preparation of old decorated plastered / concrete/ brick surfaces of walls and applying one coat of cement based paint on old decorated surfaces including preparation, complete all as specified and as directed.

Preparation of old decorated brick /concrete plastered / un-plastered surfaces of walls, Pillars, cornices etc by booming down with steel wire brushing, scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of lime white wash on the walls, pillars, cornices etc. complete all as specified and directed.

E&M PORTION:- Taking down carefully unsv aluminium / copper conductor point wiring (light, fan, light socket, power socket) complete fitting such as swithes, sockets, lamp holder, utility light fitting, fan regulator etc and removing materials from sites and making good distrubed surface of walls and roofs complete all as specified and as directed.

Taking down carefully unsv main switch / DBs alongwith MCBs / wooden board / connected fittings & fixtures any type and making good distrubed surface of walls and roofs to match the existing surface, complete all as specified and as directed. Note:-Old serviceable switches & MCB shall be taken on charge by the MES for reuse and unsv fittings shall be credited to the contractor.

Point wiring with 1.5 Sqmm single core multi stranded copper conductor FRLS PVC insulated and unsheathed heavy duty cable in colour code including contineous earth wire with cable of size 1.5 sqmm copper conductor flexible FRLS insulated drawn in and including concealed PVC rigid conduit / surface PVC casing caping medium grade of required size ISI marked with & including MS sheet metal sunken / terminal box 1.2mm thick of required size / module including white cover plate with frames & all necessory wall cutting and making good disturbed surface and all items as per the requirement of the work at site for modular fittings like sitches, sockets, fan regulator, bell buzzer etc., complete all as directed and specified.

One light/fan point controlled by one, one way switch 6 Amp complete all as specified.

One 3 pin socket outlet 6 amp independent complete all as specified.

One 3 pin socket outlet 6 amp on same board complete all as specified.

One bell / buzzer point controlled by one, one way switch 6 Amp complete all as specified.

One light point controlled by two 2 - way switches, complete all as specified.

Description all as per srl item No 135 here in before but for one 3 pin socket outlet 15 Amp independent with cable of size 2.5 Sqmm for point wiring and 2.5 sqmm as in continuous earth wire.

Modular switch 1 way 6A, 1 module, (ISI marked), complete all as specified.

Modular Socket, 6A - 2/3 pin combined 2 module, (ISI marked), complete all as specified.

Modular switch 1 way 16A, 1 module, (ISI marked), complete all as specified.

Modular Socket, 6A/16A - 2/3 pin combined 2 module, (ISI marked), complete all as specified.

Modular fan step regulator, 120W - 2 module (ISI marked), complete all as specified.

Modular switch 2 way 10A, 1 module, (ISI marked), complete all as specified.

Modular bell push with indicator 6A 1 module (ISI marked), complete all as specified.

Musical door bell, 230 volts AC supply all as specified and directed by Engineer-in-Charge.

Ceiling rose (ISI Marked) 3 Phase PVC/poly carbonate, insulated body, compete all as specified.

Supply and fix in replacement of Tube light fitting box type suitable for LED 18-20W tube Rod with end cap made out of CRCA sheet powder coated complete with hosing with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to light fitting including 18-20LED tube rod 4 feet long complete all as specified and directed. Make:-Wipro Cat Part No:-LL13-181-650 for LED tube rod & WIO 921208 for fittings or Equivalent cat part of make as specified in Appx 'F' here in after. Note :- The LED batten and LED tube rod shall be of same make.

Integrated LED Bulk Head luminaire comprises of a highly cost effective, compact, ultra low energy, huilt in engineering plastic housing with clear prismatic diffuser suitable for indoor and outdoor applications with IP 65 protection with all accessories pre wired and making connection with three core copper flexible cable of size 23/0.0076 from ceiling rose to PVC connection to bulk head fitting including Led lamp of 10W complete all as specified and directed. Make: Bajaj Part No BIBWP 10W LED or Equivalent cat part of make as specified in Appx 'F' here in after.

LED wall mounted batten suitable for twin LED tube rod indoor applications, extruded polycarbonate lighting fixture 2x10W LED with all accessories pre wired and making connection complete all as specified and directed. Make:-Wipro Cat Part No:-WIO-922208 or Equivalent cat part of make as specified in Appx 'F' here in after.

Lamp holder PVC/Polycarbonate type with back plate suitable for batten fittings, complete all as specified and directed.

LED lamp 7W, complete all as specified. Make:- Crompton Cat Part No LED 7W - B22 - CDL or Equivalent cat part of make as specified in Appx 'F' here in after.

Sheet metal enclosure factory made (Double door) for DBs, single pole and neutral, 240 volts, 12 way with 200Amps rated bus bar fixed on walls, including connecting both incoming and outgoing cable termination with proper taping, lagging testing and commissioning with & including taking down old unsv DBs complete all as specified. Make:-Legrand Cat part No :-5076 22 or equivalent cat part of make as specified in Appx "F" here in after.

MCB single pole and neutral 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4086 09 to 4086 17 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole and neutral 40 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4086 18 or Equivalent cat part of make as specified in Appx 'F' here in after.

MCB single pole 6 to 32 amps 240 volts 10 KA 'C' series all as specified. Make:- Legrand cat part No-4085 87 to 4085 95 or Equivalent cat part of make as specified in Appx 'F' here in after.

Sub main wiring with single core cable 2x 10 sq mm FRLS insulated unsheathed stranded copper conductor cable 1100 Volts grade including 20mm rigid PVC conduit (Concealed) medium grade alongwith 1x 6 Sq mm FRLS insulated unsheathed copper conductor cable as earth wire connected with main earth dolly including chesing, cutting & making good to match with the existing surface including taking down old unsv sun main wiring, complete all as specified and directed. Note:-2 wire of 10sqmm, 1 wire of 6qmm and one run of pvc conduit shall be measured as one unit.

Taking down of unsv ceiling fan ,dismantling blades and depositing Fan and blades in MES store yard of AGE E/M, complete all as specified & directed.

Supply and fixing AC single phase 240 Volts 50 HZ ,ceiling fan of size 1200mm Sweep complete in white colour, 5 Star rating with canopy with all accessories incl nuts,bolts,clamps etc. for fixing ceiling fan and provision of flexible copper conductor cable 3 core from ceiling rose to fan including taking down old unsv ceiling fan, complete all as specified and directed. Make :- Havells Cat Part No ES-50 Premium, Crompton Cat Part No Entrust 50 or equivalentas specified in list of make mentioned in Appx 'F'.

Taking down of unsv exhaust fan, dismantling and depositing Fan in MES store yard of AGE E/M, complete all as specified & directed.

Exhaust fan 3o0 mm sweep, heavy duty, single phase AC 230/240V 50 Hz AC, with energy efficient motor ,pre-lubricated double ball bearing ,speed 900 950 RPM, complete with louvers for wall mounting incl grouting, holding down bolts, nuts, washers and provision of flexible PVC insulated copper conductor cable 3 core 0.75 sqmm from ceiling rose to exhaust fan complete all as specified and directed. Make :- Bajaj Cat Part No-Supreme DLX HDor equivalentas specified in list of make mentioned in Appx 'F'.

Vertical distribution board TPN IP 43-'IK 09 with bus bars neutral links blanking plates double door suitable for FP MCCB as incommer and out going SP/TP MCBs 4 ways with & including MCCB four pole 100 Amp 415 volts of 16 KA breaking capacity with adjustable thermal, complete all as specified and directed. Make of VTPN:-Legrand Cat part No :-5077 45 and Make of MCCB:-Legrand Cat part No :-4200 15 or equivalent cat part of make as specified in Appx "B" here in after. Note:- MCCBs and DBs shall be of same make.

Single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amp 240 volts, complete all as specified

Earthing complete with galvanised mild steel earth plate electrode of size 600x600x6mm thick burried directly in ground earth (in vertical) earth pit not less than 2.25 mtr deep below normal ground level with top edge of the earth plate not less than 1.5 mtr below ground level connected to galvanised iron or earth lead wire 4mm dia (8 SWG) by means of nut, bolt, check nuts and washer of galvanised ironincluding PCC pit in PCC 1:2:4 type B-1 pre-cast RCC cover slab using reinfocement with XPM weighing not less than 1.87 kg/Sqm with suitable handle made of 12mm round bar, including necessary excavation and earth work in any type of soil, 20mm dia medium grade galvanised steel tube for watering with one end fixed with cast iron funnel and wire mesh, 15mm dia bore light grade galvanised steel tubing upto 7.5 m length for drawing earth lead wire protection pipe, common salt, charcoal, etc complete all as shown in electrical plate No 3 of SSR Part-I and testing on completion. Note:- Rate for earth lead wire & protection pipe upto 7.5mtr length are inclussive in this item & no extra payment shall be admissible for the same.

M/S shakti steel industries

M/S VIJAY KUMAR SHARMA

Tawi Constructions

M/S OM GUPTA