REPAIR/ MAINT OF DG SETS AND LIGHTING ARRESTER INCLUDING CONNECTED ITEMS AT HIGH RISE BLDG UNDER GE (W) COLABA, MUMBAI

Amount

Repair, maintenance of Diesel driven Generating set by replacing unserviceable minor spare parts such as gaskets, nuts, bolts, washers and spring including oiling, greasing and Servicing of DG set by replacement of connected fast moving spare parts of DG Set 160 KVA capacity, Make -Crompton Greaves, Ser No- 1308062206352 (Main Pump house) all as specified and directed

All as per item No 1 above but DG Set 125 KVA capacity, Make- Crompton Greaves, (Pump House No 8)

All as per item No 1 above but DG Set 125 KVA capacity, Make - Kirloskar Koel (Assaye Bldg PH )

All as per item No 1 above but DG Set 100 KVA capacity, Make - Greaves, Ser No 130804140555 & 1308042205600 ( Agastya & Menka PH )

All as per item No 1 above but DG Set 63 KVA capacity, Make - Kirloskar, Ser No-H 469470(MT Area)

All as per item No 1 above but DG Set 50 KVA capacity, Make -Greaves Ser No- 1308041507977 (Brahmaputra )

All as per item No 1 above but DG Set 40 KVA capacity, Make - Kirloskar Koel, Ser No- DS3S119CP156128 & 11340438 (Assaye & Gun House)

All as per item No 1 above but DG Set 25 KVA capacity, Make - Kirloskar, Ser No- 2A0038860 & 2A0043010 (SS NO 4 & Tilottama PH)

All as per item No 1 above but DG Set 10 KVA capacity, Make- Kirloskar AFI Bldg

All as per Item No 01 above but diesel Engine fire fighting pump 100 HP Kirloskar Brahmaputra -02 and Augusta - 02 Note :- (a) Cost of minor spare parts such as gaskets, nuts, bolts, washers and spring shall deemed to be included in the rate quoted by the tenderer. (b) Lathe work required also deemed to be included in the rate quoted against these items. (c) Spare parts such as fast moving item shall be measured and paid separately under relevant items of this schedule as "Supply only" Items. (d) Repair/ maintenance, servicing and overhaulling shall be carried out through authorized dealer / distributor of manufacturer's of DG Sets.

Repair/maintenance of existing control panel of DG set by replacing the connected items such as leads, copper wire, thimble, Analogue Ammeter, Analogue voltmeter, frequancy meter etc along with other minor parts required for carrying out maintenance complete all as directed by Engineer in Charge. Note- Ammeter, Voltmeter and frequancy meter shall be measured and paid separately as supply only items and labour element involve for replacing the same shall deemed to be included in the rate quoted against these item.

Supply only Analogue Ammeter Class 1, 5 A, 3 phase. Make : L&T Cat Part No. WDS301FEV00 or equivalent model from make Siemens.

Supply only Analogue Voltmeter Class 1, 3 Ph. Make : L&T Cat Part No. WDS01FCA00 model from make Siemens.

Supply only Frequancy meter single phase, Class 0.20.Make- L&T, Cat Part No. WDS121FCF00

Repair/ over hauling of self starter assembly of any type/make/ model including replacement of bearing bushing, washer, bendix pinion, carbon bush etc complete as required for proper functioning of DG set 100 to 160 KVA all as directed by Engr-in-Charge:- Note:- (a) Make & SM No of DG Sets shall be as specified against item No 1 here-in-before. (b) Repair works shall be carried out by authorised agent / dealer of DG Sets.

All as per item No 15 above but DG set 40 to 63 KVA

All as per item No 15 above but DG set 10 to 30 KVA Note:

Disconnecting the exhaust pipe line with mufler of DG set from Exhaust Manifold of the Engine and removing the Unserviceable Asbestos Rope from the Exhaust Pipe, Cleaning the Exhaust Pipe and cutting the mufler removing all Carbon Particles Inside including wrapping of existing asbestos rope all as directed by Engr-in-charge for the DG set 100 to 160 KVA

All as per item No 18 above but DG set 40 to 63 KVA

All as per item No 18 above but DG set 10 to 30 KVA

Dismantaling Radiator assembly from DG set Engine from inside and out side, cleaning and Washing the Radiators & fins by Compressed Air with Chemical Water, removing all dust, etc. from the Radiator and Filling Coolant, re-assemble the same in Original Position with new gaskets, radiator connecting hoses and clamps all as directed by Engr-in-charge, for the DG set 100 to 160 KVA Note:- (i) Coolant shall be measured and paid seperatly under relevnt items of these schudule. (ii) Asbestos rope shall be measured and paid separately under relevant items of these schedule. (iii) Repair works shall be carried out by authorised agent / dealer of DG Sets. (iv) Make & SM No of DG Sets shall be as spesified against item No 1 here-in-before.

All as per item No 21 above but DG set 40 to 63 KVA

All as per item No 21 above but DG set 10 to 30 KVA

Disconnecting the fuel tank including Inlet/Outlet Connections of the DG set 100 to 160 KVA and cleaning the Tank properly and removing all dusts, mud, etc. and refixing the fuel tank and Inlet/Outlet Pipe connections in orginal position complete all as directed by Engr-in-charge.

All as per item No 24 above but DG set 40 to 63 KVA

All as per item No 24 above but DG set 10 to 30 KVA

M&L for scraping of old painted surfaces of DG sets and preparation of old painted surfaces for repainting complete body of DG set including alternator, with one coat superior quality synthetic enamel paints of colour as per existing for engine, alternator, base frame, etc. by spray painting including writing SM/MES NO all as directed by Enginner -in- charge for DG set 100 to 160 KVA

All as per item No 27 above but DG set 40 to 63 KVA

All as per item No 27 above but DG set 10 to 30 KVA

Material and labour for Rewinding of starter armature complete for the following capacities of DG sets With super enamelled copper winding wire including taking out old unserviceable winding of DG set 100 to 160 KVA Note: (a) Make & SM No of DG Set shall be as specified against item No 1 here-in-before. (b) Repair/ maintenance & servicing shall be carried out through authorized representative of manufacturer's of DG Sets.

All as per item No 30 above but DG set 40 to 63 KVA

All as per item No 30 above but DG set 10 to 30 KVA

Repair/over hauling of automatic/manual, Governor assembly of any make/type/model complete including calibration and replacement of spare parts as required to make the governor 100 % trouble free complete all as directed by Engr-in-Charge for DG set 100 to 160 KVA Note: (a) Make & SM No of DG Set shall be as specified against item No 1 here-in-before. (b) Cost of spare parts shall deemed to be included in the rate quoted by the tender.

All as per item No 33 above but DG set 40 to 63 KVA

All as per item No 33 above but DG set 10 to 30 KVA

Repair/ over hauling, servicing of dynamo assembly of 12 volt of any make/type and including rewinding of armature and field coil including replacement of bearing/bushing, carbon bush etc all as required to make dynamo 100% serviceable all as directed by Engineer-in-Charge.

Repair/ over hauling, servicing of alternator for battery charger of 12 Volt Battery of any make / type / rewinding of armature and field coil including replacement of bearing / bushing etc and make the alternator 100% serviceable all as directed by Engineer-in-Charge.

S&F in repair Indicator lamp (AC/DC) LED type for as per existing fitting all as directed by Engineer-in-Charge. Make: Legrand /Semens/L&T

S&F in repairs Current transformer coil range 300/5 A ,15 VA/Cl-1 all as directed by Engineer-in-Charge. Make: Legrand/L&T/Semens

Repair/ servicing of alternator of any make/type/model including grinding/polishing of slip rings assembly cleaning and re-tensioning of carbon bush holder including replacement of carbon bush for the alternators of DG set 100 to 160 KVA. Note: (a) Make & SM No of DG Set shall be as specified against item No 1 here-in-before. (b) Cost of spare shall demand to be included in the rate quoted by the tender

All as per item No 41 above but DG set 40 to 63 KVA

All as per item No 41 above but DG set 10 to 30 KVA,

Taking out of defective automatic voltage regulator (AVR) of DG set (alternator side) and supply and fix New automatic voltage regulator (AVR) including necessary connection, testing and cable work all as directed by Engr-in-charge for DG set 100 to 160 KVA Note:- Make & SM No of DG Set shall be as specified against item No 1 here-in-before.

All as per item No 44 above but DG set 40 to 63 KVA

All as per item No 44 above but DG set 10 to 30 KVA, Note:

Supply only Piston Assembly. Part No F615320000/200710 for DG set 10 to 50 KVA capacity

Supply only Piston Ring set. Part No F600571000/AR12098 for DG set 10 to 50 KVA capacity

Supply only Linner Assembly. Part No F638210000/BM98224 for DG set 10 to 50 KVA capacity

Supply only Gasket set. Part No F656670000/BM62431 for DG set 10 to 50 KVA capacity

Supply only 'O' ring kit/Liner O ring. Part No F656680000/215983/216879/181449 for DG set 10 to 50 KVA capacity

Supply only Head gasket. Part No F600726000/BM50745 for DG set 10 to 50 KVA capacity

Supply only Main bearing. Part No M055400003/3239990 for DG set 10 to 50 KVA capacity

Supply only C R Bearing. Part No B055410003/203670 for DG set 10 to 50 KVA capacity

Supply only Front oil seal. Part No F601616000/212227 for DG set 10 to 50 KVA capacity

Supply only Rear oil seal. Part No F600916000/211253 for DG set 10 to 50 KVA capacity

Supply only Valve (inlet/Exhaust). Part No F600755000/144911/150288 for DG set 10 to 50 KVA capacity

Supply only Valve seal Part No FM35902000/F635904000/69965 for DG set 10 to 50 KVA capacity

Supply only Valve guide. Part No F600702000/66890 for DG set 10 to 50 KVA capacity

Supply only Valve steam seal. Part No F600714000 for DG set 10 to 50 KVA capacity

Supply only Can bush. Part No F600140000/157870 for DG set 10 to 50 KVA capacity

Supply only Connecting Rod bush. Part No S055520703/43067 for DG set 10 to 50 KVA capacity

Supply only Thrust washer. Part No W006320003/157280 for DG set 10 to 50 KVA capacity

Supply only Hose pipe Kit for DG set 10 to 50 KVA capacity

Supply only Hose clamp set for DG set 10 to 50 KVA capacity

Supply only Flexible pipe set for DG set 10 to 50 KVA capacity

Supply only high pressure pipe set. Part No 6H00970000 for DG set 10 to 50 KVA capacity

Supply only Leak off pipe. Part No 6H112420000 for DG set 10 to 50 KVA capacity

Supply only Oil filter set. Part No 0643610000/LF516 for DG set 10 to 50 KVA capacity

Supply only Diesel filter set. Part No4811710000/FF5511 for DG set 10 to 50 KVA capacity

Supply only Air filter set. Part No F672907000/F672908000/4055279/4055280 for DG set 10 to 50 KVA capacity

Supply only Oil pressure gauge. Part No F6908110000/500109 for DG set 10 to 50 KVA capacity

Supply only Oil temperature gauge. Part No F690803000/500410-A for DG set 10 to 50 KVA capacity

Supply only Fan belt. Part No F637511000/178611 for DG set 10 to 50 KVA capacity

Supply only Flexible pipe set for DG set 10 to 50 KVA capacity

Supply only High pressure pipe set. Part No. 6H00970000 for DG set 10 to 50 KVA capacity

Supply only Leak Off pipe. Part No. 6H112420000 for DG set 10 to 50 KVA capacity

Supply only Oil filter set. Part No. 4811710000 for DG set 10 to 50 KVA capacity

Supply only Diesel filter Set. Part No. 0643610000 for DG set 10 to 50 KVA capacity

Supply only Air filter set. Part No. 6H411 for DG set 10 to 50 KVA capacity

Supply only Fan belt. Part No. 0605201000 for DG set 10 to 50 KVA capacity

Supply only Belt tensioner. Part No. 6H05003000 for DG set 10 to 50 KVA capacity

Supply only Lube oil pump. Part No. 6H00410000 for DG set 10 to 50 KVA capacity

Supply only Exhaust blow. Part No. 6H0041000 for DG set 10 to 50 KVA capacity

Supply only Stop solenoid. Part No 6H23204000 for DG set 10 to 50 KVA capacity

Supply only Copper washer set. Part No. 6H06110000 for DG set 10 to 50 KVA capacity

Supply only Engine Oil (20 W 40) Make- Servo/Castrol /BPCL.

Supply only Coolent Make- Fleet Guard or equivalent Make as approved by GE.

supply and fixing sealed Lead - Acid battery 12 Volts 120 Ah suitable DG Set with connected wiring all as specified and directed. Make- Exide

Supply and fixing sealed Lead - Acid battery 12 Volts 150 Ah suitable DG Set with connected wiring all as specified and directed. Make- Exide

Supply, lay in trenches, floors, fix on wall/pole, passing through pipes, LT UG cable, 1100 volts grade, PVC/ XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs of size 70 Sq.mm 3.5 core confirming to IS specifications :-

All as per Item No.91 above but of size of XLPE cables 35 Sqmm 3.5 Core.

Description all as per item no 91 but size of XLPE 16 Sq.mm 3.5 core

Description all as per item no 91 but size of XLPE 10 Sq.mm 4 core

Excavation in trenches not exceeding 1.5mtr wide and not exc 1.5mtr in depth and getting out in soft/ loose soil for laying of cable all as specified and directed.

Returning, fillling in trenches including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick all as specified and directed.

Removing excavated surplus soil and depositing where directed at a distence not exceeding 50mtr at a level not exceeding 1.5 mtr above the starting point all as specified and directed.

Supply lay/spread in trenches, river sand, clean, including spreading, levelling, punning for laying /cushioning of cables all as specified and as directed.

Supply lay in trenches fly ash bricks, old size sub class “B” disignation for cable protection all as specified and as directed.

M&L electrical earthing complete with GI plate Electrode of size 60 Cm X 60 Cm X 6 mm thick burried directly in ground vertically at a depth not less than 2.25 mtr. below normal ground level, with top edge of earth plate at a depth not less than 1.5 mtr. below normal ground level, connected to GI earth strip 32mm x 6mm earth lead by means of bolts, nuts and washers of galvanised iron, earth lead strip protected by means of 32 mm bore dia light grade GI pipe up to switch board/panel board , all as specified and shown in MES schedule Electrical Plate No-5 of SSR Part I, including excavation and earth work in any type of soil, PCC 1:3:6 type C1 in chamber, RCC 1:2:4 type B1, 40 mm thick cover slab with 6 mm dia MS bars at 100 mm centre to centre both ways, with 6 mm dia MS hook, Charcoal dust, salt, funnel for watering complete and testing the Earth resistence and writing on the chamber by paint all as specified and as directed.

M & L for repair of Single pointed air termination aluminium rod 12 mm dia 300mm long complete to walls/roof/pipes with suitable clamps of MS bolts and nuts etc required at site all as specified and as directed by Engineer-in-Charge. Note:- MS work will be measured and paid separately.

M&L for repair of Single pointed air termination Copper rod 12 mm dia 300mm long fixed to walls/roof/pipes with suitable clamps of MS bolts and nuts etc required at site all as specified and as directed by Engineer-in-Charge. (MS work will be measured and paid separately).

M&L of taking down existing aluminum strip 25mmx3.00mm / 32x6mm Gl Strip from the top of bldg /ground (roof down conductor) and keep shape custody (for serviceable strips for re-use), retrieved all as specified and directed by Engineer-in-Charge.

M&L for making old serviceable strips refined against item No-106 making straight and re-fixing the same in position by wiring screw / gattas /insulators /PCC Block all as specified and directed by Engineer-in-charge.

M&L for aluminum strip 25x3.15 mm earth continuity conductor or Main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles in roof of high rise bldg or any other indicated and as required by saddles not more than distatance of 50 cm between two saddles with jointing nuts, bolts /washers to wall/surface or recess of high rised buildings or burried in ground or any situation for loop all as specified and directed by the Engineer-in-Charge.

M&L for copper strip 25x3.15 mm earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles in roof of high rise bldg and as required by sadles not more than distatance of 50 cm between two saddles with jointing nuts, bolts /washers to wall/surface or recess of high rised buildings or burried in ground or any situation for loop all as specified and directed by the Engineer-in-Charge.

M&L in repairs galvanised iron strip 25x3.15mm earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or or buried in ground or drawn in conduit/pipe or fixed to poles in roof of high rise bldg and as required by saddles not more than distatance of 50 cm between two saddles with jointing nuts, bolts /washers to wall/surface or recess of high rised buildings or burried in ground or any situation for loop all as specified and directed by the Engineer-in-Charge.

M&L in repairs galvanised iron strip 32x6mm earth continuity conductor or main earthing lead fixed to wall on batten or recess or chases or buried in ground or drawn in conduit/pipe or fixed to poles in roof of high rise bldg and as required by saddles not more than distatance of 50 cm between two saddles with jointing nuts, bolts /washers to wall/surface or recess of high rised buildings or burried in ground or any situation for loop all as specified and directed by the Engineer-in-Charge.

S&F in repairs Gl tubing 40mm bore light grade in trenches/floor/fixed along pole for cable/earth strip protection with proper size of clamps nuts and bolts for fixing lighting conductor all as specified and directed by the Engineer-in-Charge.

All as per item No 112 above but of size 50mm bore all as specified and directed by the Engineer-in-Charge.

M&L for Raw salt with mixiing in water all as specified and directed by the Engineer-in-Charge.

M&L funnel suitable for each pit all as specified and directed by the Engineer-in-Charge.

M&L in repairs insulator for each strip and fixed arrangement in roof/wall of building for run of strips on it with nuts and bolts all as specified and directed by the Engineer-in-Charge

S&F in repairs test point terminal block made of gun metal or phosphorus bronze of size 75X75X25mm drilled and screwed including 03 Nos 8 mm dia long hex head screw all as specified and directed by Engineer-in-Charge.

M&L dismantling of PCC earth pit chamber and making PCC chamber of size as per electrical plate No 3 of SSR 2009 Part I with PCC (1:2:4) type B1 including RCC cover with suitable handle all as specified and directed by the Engineer-in-Charge

S&F in repairs Pit cover, cast iron 10mm thick hinged to Cl frame 40x40mm all as specified and directed by the Engineer-in-Charge.

Earthing complete with galvanized steel earth plate electrode 600 x 600 mm, thickness not less than 6mm buried directly in ground (earth pit not less than 2.25 mtr deep Below ground level) with top edge of the plate n.less than 1.5 mtr below ground level, connected to galvanized earth lead 25 x 3.15 mm dia by means of bolts, nuts, check nuts and washers of GI including PCC pit in PCC 1:2:4 type B-1 angle iron 40x40x3mm frame with pre-cast RCC 1:2:4 type B-1 cover with XPM weight n.less than 4kg/sqm and 6mm dia bar handle, excavation and earth work in any type of soil, charcoal, dust and common salt light grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore 05 mtr long and earth wire up to main earthing of pole complete all as shown in Electric Plate No 3 of SSR 2009 Part-I, all as specified and testing on completion

All as per Srl item No 120 above but using galvanised iron strip 32x6mm upto test point.

Earthing complete with Copper earth plate electrode 600 x 600 mm, thickness n.less than 6mm buried directly in ground (earth pit not less than 2.25 mtr deep Below ground level) with top edge of the plate n.less than 1.5 mtr below ground level, connected to copper earth lead 25 x 3.15 mm dia by means of bolts, nuts, check nuts and washers of GI including PCC pit in PCC 1:2:4 type B-1 angle iron 40x40x3mm frame with pre-cast RCC 1:2:4 type B-1 cover with XPM weight not less than 4kg/sqm and 6mm dia bar handle, excavation and earth work in any type of soil, charcoal, dust and common salt light grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore 05 mtr long and earth wire up to main earthing of pole complete all as shown in Electric Plate No 3 of SSR 2009 Part-I, all as specified and testing on completion

S&F in repairs cross arms bracing supports clamps and back plates fabricated from structural steel section including nut, bolts, washers, welded, binding, cold as hot drilling holes for bolts in any shape or size as required painted with two coats of aluminium paint over a coat of red oxide primer after preparation of surface all as specified and directed.

S&F plug & socket board TPN enclosure with 3 pole and earth metal plug & socket for incorporating TP including MCB TPN 32 Amps all as specified and directed. Make :- Havells/ Standard/Legrand.

S&F in repairs metal plug clad & socket including MCB SPN 20 Amps all as specified and directed by the Engineer-in-Charge. Make :- Havells/ Standard/Legrand.

M&L in repairs of Aviation obstruction light with single 100w, GLS in over head tanks / Bldg / high mast/Shaft pans comprises of (a) Luminaries body : Aviation yellow coloured die-cast aluminum alloy housing for one nos 100 watt GLS Lamps, (b) Enclosure : Red colored poly carbonate done secured to housing by 3 Nos screw (c) Mounting arrangement : 38 mm dia threaded item with lock nets for mounting on pipe above structure (d) Degree of protection : IP43, Make : Bajaj/ Havells / CG

M&L in repairs serviceable 2 core aluminum conductor of Size 2.5 Sqmm for obstruction light in over head tank/high rise tower/ bldg including 20mm PVC pipe and sadles not more than distatance of 50 cm between two saddles all as specified and directed.

M&L for maintenance free chemical eathing comprising of 17.2 mm dia molecularly copper bounded 250mm micron on steel electrode 2.5 mtr long each- 03 Nos per set, earth enhacning soil treatment compound TEREC+ having essential chemical ingradinets such as ionic chemical, dispersion chemical, diffusion chemcial, expansion chemical and bygroscopic chemical to provide stable low resistance for earth terminal to make it maintenance free ( TEREC + comes in 5 kg per bag required per set of chmical earthing) HDPE earth pit cover madium duty to withstand 2000 kg load. U clamp bolt for connecting copper strp Minimum size of copper strip 25 X 3 mm-20RM to earth rod all as specified and directed.

M&L in repairs sheet metal enclosure 2 way with MCB SPN 16 Amps fixed in high rise bldg all as specified and directed.

M&L in repairs refilling of earthing materials charcoal, salt in sufficient quantities at par the satisfaction of Engr - in- Charge for better results in existing earthing all as specified and directed.

M&L in repairs Sub main wiring, with two runs of 2.5 sq mm stranded copper conductor PVC unsheathed FRLSH wire along with 2.5 sq mm green colour wire as earth contuinity conductor and connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires all as specified & as directed. Make : Polycab / Havells / Finolex as approved by GE Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. Note: Mode of measurement two runs of 2.5 sqmm cable and one run of 2.5 sqmm cable with PVC conduite shall be measured as one length.

S&F in repairs wall mounted exhaust fan PLASTIC body having high speed 1325 rpm of sweep size 200 mm, inbuilt bird gaurd and air delivery 500 CMM with nuts, bolts, fastners including connecting with PVC insulated and PVC sheathed copper flexible cable and necessary fixing arrangement all as specified and directed. Make - Bajaj MAXIMA DXI 200MM / Havells / CROMPTON.

Supply and lay in trenches, floors, fix on wall/pole, passing through pipes LT UG cable, 1100 volts grade, PVC / XLPE insulated, with multistranded aluminium conductors, armoured with galvanised steel wire or tape, gland, lugs of size 10 Sq.mm 3 core confirming to IS specifications all as specified and directed. Make- Havells/Palza/RR kabel

S&F in repairs MCB SP, 240 volt, 16 to 40 Amps, C series all as specified and directed. Note: Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB Make : Havells / Legrand / Schneider / Indo Asian

M&L in repairs Sub main wiring with two runs of 10 sq mm stranded copper conductor PVC unsheathed FRLSH wire along with 10 sq mm green colour wire as earth contuinity conductor connected to common earth dolly including PVC FR heavy duty conduit of adequate size (not less than 32 mm dia) for housing the wires from panel / Main DB to house SPN DB all as specified & directed. Make : Finecab / Havells / Finolex as approved by GE Note: (a) Thimble/lugs of rating of MCB should be used with wire for fixing in the MCB. (b) Mode of measurement shall be two runs of 10 sqmm cable and one run of 10 sqmm cable with PVC conduit shall be measured as one length.

M/s ASPIRE ENGINEERING ENTERPRISES

N.S.ENTERPRISES

Bidder Name

NOEL ENGINEERS

N.S.ENTERPRISES

M/s ASPIRE ENGINEERING ENTERPRISES