Drilling of bore well with motor

Drilling of bore wells by down the hole hammer, (DTH) drilling of finished dia of 165mm (6½’’ dia) in all formations to the depth specified and reaming the bore to the required dia to lowering (insertion) of 175mm internal dia casing pipe with coupling, lowering, fixing of casing pipes, flushing the bore well at an average pressure of 7kg/Cm2 (100PSI) conducting yield test, inclusive of transportation from point to point, crew charges, consumables, shifting of rig and all other charges etc., in all over the district. The bore wells should be true & vertical and work should be carried out to the satisfaction of the department and carried out as per IS-2800 Part-I & II/1979 and amendments if any from time to time and fixing of casing pipe and supply and fixing of Well Cap.

Cost of 180 mm dia / 6 Kg UPVC casing pipes for potable water supply confirming to IS 12818/1992 as amended fron time to time including transportation all taxes etc., ( ISI standard make like Sudhakar etc., ) should be supply.

Geological Survey Charges

Earth work excavation and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in Ordinary Soil-Mechanical Means.

Manufacture, Supply,& delivery of 90mm dia High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete

Manufacture, Supply,& delivery of 63mm dia High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc.,complete

Supply of 3 core 2.5 sqmm or 6 sqmm PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:2010 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells / Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL / Sudhakar / Bonton / RajnigandhaSSR 2025-26 Page No. 309 (ELEC-1.5.5(n))

Providing and supplying in ISI mark rigid PVC o Classs/s pipe (push on joints) pressure pipes confirming to IS specifications no. 16647-2017 inclusive cost of EDPM gasket seals on joints including all statutory duties of Class 500 PN-12.5 of dia 110mm SSR 2025-26 Page No. 309 (TBSP-H.I-45)

Supply, Transportation and fixing of 50mm dia 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts.SSR 2025-26 Page No. 388 (ELEC-5.15.6(b))

Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete. SSR 2025-26 Page No. 382 (ELEC-5.11.2)

Supply, Transportation and fixing of 150mm dia dia galvanised bore cove 450mm length, 12mm thickness and 75mm wide MS Clamp set with required nuts and bolts. SSR 2025-26 Page No. 388 (ELEC-5.15.6(e))

Supply and Transportation of star rated 7.50 HP 20-25 StageThree phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / Aryenvarsha / Lubi / Falcon SSR 2025-26 Page No. 379 (ELEC-5.7.1(f))

Labor charges for instalation, testing, trail run and commusing of submersible pumpset with all accessories as per the standared specefications