Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹12.5 LAccepted-AOC | L1 | Accepted-AOC Lowest Bidder | |
| 2 | L2₹14.1 L+₹92,975 (7.04%)Rejected-AOC | L2 | Rejected-AOC Other than Lowest Bidder | |
| 3 | L3₹16.0 L+₹2.8 L (21.0%)Rejected-AOC | L3 | Rejected-AOC Other than Lowest Bidder | |
| 4 | L4₹16.9 L+₹3.7 L (27.8%)Rejected-AOC | L4 | Rejected-AOC Other than Lowest Bidder |
Tender Value
₹20 L
EMD Value
₹40,000
Closing Date
29 Sept 2022, 6:00 pmClosed
Garrison Engineer (South) Jaipur
Garrison Engineer (South) Jaipur Military Engineer Services Kalyan Marg, Jaipur302006
REPAIR AND MAINT OF EXTERNAL WATER SUPPLY SYSTEM INCL INSTALLATIONS UNDER GE(S) JAIPUR
2022_MES_549834_1
GE (S)/J-29P /2022-23 8750/E8
Open Tender
Civil Works
Item Rate
210 days
Jaipur
Class E category b(i)
9 documents required · 9 mandatory
₹500
GE (S) Jaipur
₹40,000
Yes
12 Nov 2022
3 Sept 2022
1 Oct 2022
3 Sept 2022
29 Sept 2022
16 Sept 2022
Amount
Excavation in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth and getting out in soft/loose soil in trenches complete all as specified.
Returning, filling-in, including spreading, levelling watering and well ramming in layers not exceeding 25 cm thick each, in soft /loose soil complete all as specified.
Removing excavated surplus soil to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting point complete all as specified.
M&L for galvanised steel tubes "medium grade " (ISI marked) with all fitting( ISI marked) and fixed complete to walls and ceilings or laid in floors/trenches and under road, complete all as specified and directed including taking down old u/s pipes of the following sizes :-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
Supplying, laying, jointing and testing ductile iron pressure pipe (K-7) centrifugally cast, ISI marked, with socket and spigot ends & jointing materials ( IS 8329/2000), standard length , of k7 specifications with out zinc coating laid in trenches, under floor,road etc for water complete all as specified and directed including taking down old u/s cast iron /ductile iron of following sizes:- Note :- (i) Quoted shall be inclusive of jointing with jointing material as required. (ii) CI/DI fittings/accessories will be measured & paid seperately under relevant item.
80 mm dia
100 mm dia
150 mm dia
M & L for sluice valves,class PN 1.6 of undermentioned type and size with cast iron body with forged steel spindle, non rising type and cast iron wheel head, both ends flanged, IS-14846 marked comlete with neoprene rubber gasket ,jointing material and incl nuts/bolts/washer of suitable size etc complete all as specified and directed including taking down old unsv :-
80 mm bore
100 mm bore
150 mm bore
M & L for non return valves,class PN 1.0 of undermentioned type and size with cast iron body and both ends flanged, IS-14846 marked comlete with neoprene rubber gasket ,jointing material and incl nuts/bolts/washer of suitable size etc complete all as specified and directed including taking down old unsv :-
80 mm bore
100 mm bore
150 mm bore
M & L for Butterfly valve ISI marked complete with all fittings/accessories, required for fixing in existing header.complete all as specified and directed including taking down old unsv valve of following size :-
80 mm bore
100 mm bore
150 mm bore
M&L ductile iron/CI fittings, ISI marked viz bends, tapers, reducers, tee pieces (single or double branch) any type, angle / radius and straight connecting pieces, but all ends flanged, size of pipe upto 200 mm bore, complete all as specified and directed.
Supply and fixing in repair MS saddle piece made out of MS flat iron 50x6mm complete with GI socket welded it on one FI strip suitably positioned at the centre of pipe complete with MS nuts, bolts, washers (02 Nos) and rubber packing for branch connection complete all as specified and directed for following sizes of pipe :- (Note. Excavation and earth work shall be measured and paid separately)
80 mm dia
100 mm dia
150 mm dia
S & F in repair detachable joints suitable for CI/DI pipe complete with cast iron ring , rubber rings nut, bolts, excavation and earthwork, cutting of pipe etc of following sizes complete all as specified and directed . (Note. Excavation and earth work shall be measured and paid separately)
80 mm dia
100 mm dia
150 mm dia
Material and labour for drilling hole upto 250 mm dia under bituminous road or any type of floor for laying of pipe not exceeding 1.5 mtr deep including refilling with material and watering well ramming/compacting and making good with PCC 1:2:4 type B-1, 10 cm thick complete all as specified and directed .
Construction to brick masonary valve pit/ chamber of under mentioned size and including necessary excavation and earth work, PCC (1;2:4), brick work in CM(1;6) 230/345 mm thick, Plaster in CM 1:6 on inside and out side (above ground ), angle iron frame 40x40x6mm size including fabrication work, hold fast, MS sheet cover 3mm thick, duly painted with one coat of black bituminous paint of approved quality, handle and including provn of 40mm dia Godrej (freedom) lock complete all as specified and directed :-
900x900x900 mm (internal dimension)
1200 x1200x900 mm (internal dimension)
600 x600x600 mm (internal dimension)
Repairs to sluice valves,class PN 1.6 of undermentioned type and size with cast iron body with steel spindle, non rising type and cast iron wheel head, both ends flanged, complete with neoprene rubber gasket ,jointing material and incl nuts/bolts/washer of suitable size etc complete all as specified and directed :- .
80 mm bore
100 mm bore
150 mm bore
M&L for leakage rectification, cutting of existing pipe and making threading for repair/ replacement of U/S fittings etc., pipe in short lengths (1 to 2 meter pipe) or addition / alteration of the following size. Replacement of above GI pipe and including fittings like tee, Elbow/Sockets/Union/Nipple etc and making serviceable including necessary execavation as required complete all as specified and directed.
15 mm bore of pipe
20 mm bore of pipe
25 mm bore of pipe
50 mm bore of pipe
80 mm bore of pipe
100 mm bore of pipe
150 mm bore of pipe
S & F in repair for rotational moulded polyethylene water storage tanks , triple layer ,ISI marked with inlet/outlet pipe pieces (20 to 25 mm bore) GI pipe medium grade 10 to 20 cm length each,(cylindrical vertical with closed top), hoisted and fixed in position of following sizes complete all as specified and directed. (Note:- Cost of connection with incoming and outgoing pipe line is included in above quoted cost.)
M&L for gun metal gate valve/forged valve with iron wheel head, screwed both ends for jointing iron pipes, non rising, forged brass spindle class-1, IS-778 marked of following sizes including taking down old unsv :-
15 mm bore
20 mm bore
25 mm bore
40 mm bore
50 mm bore
M&L in repair for run lead joints in position including preparation of ends provision of hump yarn gasket and pig lead filling and proper caulking and testing complete etc pipe bore of following size including , cuting of pipe etc of following sizes :- Note:- Excavation & earth work shall be measured and paid separetly in respective item
80 mm dia
100 mm dia
S&F Bib Tape 15 mm dia, cast iron copper alloys screwed, screwed for iron type and fixed.
Providing water tanker 5000 ltr water capacity, at bhakrota location due to failure of water supply source from any nearest civil area potable water availability point all as per directed. Note :- Source of water to be approved by GE in writing and all T&P shall be arranged by Contractor.
Repair & maintenance of existing header ,jointing,welding pipe line with header incl if required material such as, Tee, long/short MS bend coupler,flange , nuts ,bolts,washer ,rubber gasket kit as per existing size of pipe,exc ,earth work complete etc. Testing & commissining of pipe line after repair all as per directed by engr in charge
PCC (1:3:6) type C2 using 40 mm graded aggregate for making good the disturbed portion of road/floor/platform etc including form work compaction etc all as specfied and directed by Engineer-in-Charge.
M& L for repair of existing MS pits/tank cover,air pipe including of unsv hinghes,hook, wire mesh,welding work and applying one coat of synthetic enameled black paint after appying one coat of red oxide primer complete.
M&L for leakage rectification, cutting of existing pipe and making threading for repair/ replacement of U/S fittings, rubber gasket, saddle piece, nuts, bolts with washer etc., pipe in short lengths (maximum 1.5 mtr to 3 mtr) or addition and alteration of 80 to 100 mm dia CI/DI pipe dia and including inserting/replacement of fitting, rubber gasket, welding, lead joint,and including necessary exacavation & earth work as required for making it serviceable complete all as specfied and directed . Note:- Cost of pipe in short lengths (maximum 1.5 mtr to 3 mtr), fittings, rubber gasket, welding, and excavation & earth work shall be deemeed to be inluded in quoted rate. Notes:- (i) Cost of pipe in short lengths (maximum1.5 mtr to 3 mtr), fittings, and welding shall be deemeed to be inluded in quoted rate. (ii) The job should be completed in 8 hours(max). (iii) The rectification should be maintained for minimum one year. (iv) D-Joint, Saddle piece should be measured in the respective item of schedule. (v) The job location shall contain flange pipes in overhead tanks & UG sumps also.
All as per item No 24 above but for size 150 mm.
S&F in replacement of Supply and replace U/S float valve complete including taking down of following sizes :-
20 mm bore
15 mm bore
Supply and use as per direction by engr in charge on site of bleaching powder grade-I approved quality having chlorine content 35% dry and white free flowing powder without hard lumps and impurities and easily soluble in water. The material should not contain more than 0.3% moisture particle size passing through - 1.70 mm IS sieve and stability loss of chlorine should be maximum 1/15th.
Supply, fixing, testing and commissioning in repair centrifugal pump set of capacity 1.0 HP single phase 230 volts 50HZ AC supply complete as directed and specified by Engineer in charge. Make :- Kirloskar Jalraj-1 ultra item code- D11130100723/ KSB or equivalent cat part in other makes as per Appendix 'B'. (Note:- For item no. 28 & 29 cost of complete connection with existing input and output supply pipe line and all minor connecting parts is included in above quoted price. Cost of suitable metal clad box and MCB is included in above quoted price.)
Supply, fixing, testing and commissioning in repair centrifugal pump set/Monoblock pump set of capacity 2.0 HP single phase 230 volts 50HZ AC supply complete as directed and specified by Engineer in charge. Make :- kirloskar single phase monoblock pump KDS 216++ KSB or equivalent cat part in other makes as per Appendix 'B'.
M & L for transportation & dismantling of mono block/centrifugal pump set any type Cap 1 to 5 HP, 1/3 phase, 230/415 volts, 50Hz, AC supply after disconnecting electric connection, dismanteling of pump for repairing/ replacing defective parts as ordered, re-assembling and testing including replacing worn out nuts, bolts, washers oiling/greasing, cleaning the body and applying one coat of synthetic enamel paint complete and lowering the same and reconnecting to pipe line and electric connection after following repairs as directed by Engineer-in-charge :- Note : - (i) The spare part required for replacement shall be measured & paid for separately as supply only under item No 30.01 to 30.09
Supply only terminal box including connectors of copper, plate of motor.
Supply only ball bearing as per existing.
Supply only, stainless steel pumpshaft.
Supply only, gun metal impeller with neck key, distance bush.
Supply only coupling with cover as per existing.
Supply only damaged MS love joint star rubber disc as per existing
Supply only flange joints as per existing.
Supply only fan blade as per existing.
Supply only steel pipe for watering the gland packing as per existing
Cutting of burnt winding and rewinding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc.
M & L for transporattaion & dismanteling of centerifugal pump set of Cap 7.5 HP to 12.5 HP 3 phase, 415 volts, 50Hz, AC supply after disconnecting electric connection, dismanteling of pump for repairing/ replacing defective parts as ordered, re-assembling and testing including replacing worn out nuts, bolts, washers oiling/greasing, cleaning the body and applying one coat of synthetic enamel paint complete and lowering the same and reconnecting to pipe line and electric connection after following repairs as directed by Engineer-in-charge :- Note : - (i) The spare part required for replacement shall be measured & paid for separately as supply only under item No 31.01 to 31.10
Supply only terminal box including connectors of copper, plate of motor.
Supply only ball bearing as per existing.
Supply only, stainless steel pumpshaft.
Supply only, gun metal impeller with neck key, distance bush.
Supply only coupling with cover as per existing.
Supply only damaged MS love joint star rubber disc as per existing
Supply only flange joints as per existing.
Supply only fan blade as per existing.
Supply only steel pipe for watering the gland packing as per existing
Supply only base stand for motor with new nut, bolt & washers as per existing
Cutting of burnt winding and rewinding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc.
M & L for transporattaion & dismanteling of centerifugal pump set of Cap 15 to 30 HP 3 phase, 415 volts, 50Hz, AC supply after disconnecting electric connection, dismanteling of pump for repairing/ replacing defective parts as ordered, re-assembling and testing including replacing worn out nuts, bolts, washers oiling/greasing, cleaning the body and applying one coat of synthetic enamel paint complete and lowering the same and reconnecting to pipe line and electric connection after following repairs as directed by Engineer-in-charge :- Note : - (i) The spare part required for replacement shall be measured & paid for separately as supply only under item No 32.01 to 32.10
Supply only terminal box including connectors of copper, plate of motor.
Supply only ball bearing as per existing.
Supply only, stainless steel pumpshaft.
Supply only, gun metal impeller with neck key, distance bush.
Supply only coupling with cover as per existing.
Supply only damaged MS love joint star rubber disc as per existing
Supply only flange joints as per existing.
Supply only fan blade as per existing.
Supply only steel pipe for watering the gland packing as per existing
Supply only base stand for motor with new nut, bolt & washers as per existing
Cutting of burnt winding and rewinding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc.
M & L for taking out submersible pump set of Capacity 10 HP to 20 HP, 1/3 phase, 230/415 volts, 50Hz, AC supply along with column pipe of any size from the bore well after disconnecting electric connection, dismantling of pump and motor for repairing/ replacing defective parts as ordered, oiling, greasing as required and re-assembling and testing including replacing worn out nuts, bolts, washers oiling/greasing, cleaning the body and applying one coat of synthetic enamel paint complete and lowering the same after repairing and making electrical and delivery pipe connections complete all as specified and directed. Note : - (i) The spare part required for replacement shall be measured & paid for separately as supply only under item No 33.01 to 33.07
Supply only, stainless steel pumpshaft.
Supply only, gun metal impeller with neck key, distance bush.
Supply only Shaft bush.
Supply only thurust bearing with plate of pump
Supply only rubber gasket 3mm thick having 4 Nos of 5/8" dia hole.
Supply only Shaft coupling with key.
Supply only steel sleave for submersible cable.
Cutting of burnt winding and rewinding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc.
Repair to pump shaft or any other part by welding, grinding, polishing & straghting etc
M & L for taking out submersible pump set of Capacity 3 HP to 7.5 HP, 1/3 phase, 230/415 volts, 50Hz, AC supply along with column pipe of any size from the bore well after disconnecting electric connection, dismantling of pump and motor for repairing/ replacing defective parts as ordered, oiling, greasing as required and re-assembling and testing including replacing worn out nuts, bolts, washers oiling/greasing, cleaning the body and applying one coat of synthetic enamel paint complete and lowering the same after repairing and making electrical and delivery pipe connections complete all as specified and directed. Note : - (i) The spare part required for replacement shall be measured & paid for separately as supply only under item No 34.01 to 34.07
Supply only, stainless steel pumpshaft.
Supply only, gun metal impeller with neck key, distance bush.
Supply only Shaft bush.
Supply only thurust bearing with plate of pump Make : Aroma/ KSB
Supply only rubber gasket 3mm thick having 4 Nos of 5/8" dia hole.
Supply only Shaft coupling with key.
Supply only steel sleave for submersible cable.
Cutting of burnt winding and rewinding the stator with supper enamelled copper wire of suitable size and class of insulation including insulation paper, sleeves, thimbles etc.
Repair to pump shaft or any other part by welding, grinding, polishing & straghting etc
Repairs of the LT Panel & Starter of submersible pump of any capacity and any make as under:-
M&L for re-wiring of the complete panel main switch to starter and connected accessories with copper conductor PVC insulated wire of existing suitable size (upto 4 sqmm and maximum 20 mtr) including cable lugs and metal clad box including 20 amp MCB complete all as specified and directed.
Supply & fix in repair for contactor of capacity 100 Amp, 4 pole, as per existing.complete all as specified and directed. Make:- Havells CAT No CN5 40F or equivalent cat part in other makes as per Appendix 'B'.
Supply & fix in repair for contactor of capacity 200 Amp, 3 pole, type as per existing.complete all as specified and directed. Make:- Havells Cat No CH1115T or equivalent cat part in other makes as per Appendix 'B'.
Supply & fix in repair for electronic timer as per existing. Make: Legrand cat Part No 049986 or equivalent cat part in other makes as per Appendix 'B'.
Supply & fix in replacement Micro pressure based relay 8 amp to 40 amp as per existing.
Supply & fix in repair for single phase preventor for the motors upto capacity 30 HP as per existing complete all as specified and directed.
Supply & fix in repair for ampere meter with CT,s of range 0-30 amps as per existing complete all as specified and directed.
Supply & fix in repair for voltmeter with PT,s of range 0-500 volts as per existing complete all as specified and directed.
Supply & fix in repair for over load relay coil 37-50 Amp, 230 volts type RT23V as per existing complete all as specified and directed.
Supply & fix in repair for existing Panel Box housing (K105K) upto size 1.2 x 0.4x1.5mtr with new bus-bar (upto 10 Kg) suitable for existing fittings/fixtures complete all as specified and directed.
Supply & fix in repair for MCB TPN of capacity 63 amps , rating 10/15 KA 415 volts as per existing complete all as specified and directed.
Supply and fix jointing kit for submersible cable of 1100 volts grade of 4/6 sqmm 3 core , complete all as specified and directed.
Supply only submersible copper cable PVC insulated over all sheethed flat ISI marked of 1100 volts grade of 4 sqmm 3 core. Note :- Necessary receipt voucher (RV) shall be prepared for record duly verified by audit.
Supply only submersible copper cable PVC insulated over all sheethed flat ISI marked of 1100 volts grade of 6 sqmm 3 core. Note :- Necessary receipt voucher (RV) shall be prepared for record duly verified by audit.
Supply and replace changeover switch 100 Amp , 415 volts, 4 pole on load without sheet enclouser suitable for existing panel complete all as specified and directed.
Supply and replace changover switch 250 Amp , 415 volts, 4 pole on load without sheet enclouser suitable for existing panel complete all as specified and directed. Make:- Havells Cat No IHCBFO0100 or equivalent cat part in other makes as per Appendix 'B'.
Supply calcium based high strength granular chlorination chemical (calcium hypochlorite having chlorine 65% to 70% ) for water treatment. Granular material shall be free of foreign material decomposing at 177 C soluble in water and alcohol not hygroscopic practically clear in water solution at saturation level. The material should not contain more than 5% to 10 % moisture. Granular size should be as follows:- Mesh passing through -100 BSS 1.5 % maximum iron as Fe 0.05% maximum Mn 40 PPM maximum Mol wt 142.98, Toxicity :Oral rate LD 50-850 mg/kg. duly tested from approved laboratory packed in a fibre drum duly sealed granular type from manufacturer or authorised dealer/distributor complete all as specified and directed. Note- Brand name/batch number expiry date and complete particulars of manufacturer should be printed on the container/packing and only sealed container supply will be accepted. Make:-“M/S Sree Rayalaseema Hi-Strength Hypo Ltd (Puri Chlor brand Calcium Hypo Chlorite) or any make approved by E-in-C's Branch”.
M & L Sand cushioning to PVC under ground cable with screened and washed tibba sand (non cohessive) and punning to provide a required cover complete all as specified and directed. Note : Punned thickness shall only be measured for payment.
M&L Brick class "B" brick old size as in protection cover to under ground cables laid dry, flat & jointly to each other complete all as specified.
Supply ,Laying, Jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI marked) laid in trenches, ducts, pipes or fixed on poler of size 16 Sqmm 4 core complete all as specified and directed. including taking down old unserviceable cable.
Supply ,Laying, Jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI marked) laid in trenches, ducts, pipes or fixed on poler of size 25 Sqmm 4 core complete all as specified and directed. including taking down old unserviceable cable.
Supply ,Laying, Jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI marked) laid in trenches, ducts, pipes or fixed on poler of size 95 Sqmm 3 1/2 core complete all as specified and directed. including taking down old unserviceable cable.
Supply ,Laying, Jointing, testing & commissioning LT under ground cable XLPE insulated, screened PVC bedded, galvanised steel strips or wire armoured, heavy duty with multi stranded aluminium conductor, 1100 volts grade (ISI marked) laid in trenches, ducts, pipes or fixed on poler of size 150 Sqmm 3 ½ core complete all as specified and directed. including taking down old unserviceable cable.
Supply and fix in repair DOL starter,suitable for upto 5 HP 1/3 phase, 230/415 volts AC supply motor complete all as specified and directed.
Supply and fix in repair of fully automatic star delta starter for 5 HP to 7.5 HP capacity motor in centrifugal/submercible pump with range of phase current from 9-13 Amp comprising of combo volt and ammeter single phase preventor, over load relay and timer housed in MS sheet power coated enclosure for 5 HP to 7.5 HP Capacity complete all as specified and directed.
Supply and fix in repair of fully automatic star delta starter for 15 HP to 25 HP capacity motor in centrifugal/submercible pump with range of phase current from 25-30 Amp comprising of combo volt and ammeter single phase preventor, over load relay and timer housed in MS sheet power coated enclosure for 15 HP to 25 HP Capacity complete all as specified and directed.
Supply and fix in repair of fully automatic star delta starter for 10 HP to 12.5 HP capacity motor in centrifugal/submercible pump with range of phase current from 16-22 Amp comprising of combo volt and ammeter single phase preventor, over load relay and timer housed in MS sheet power coated enclosure for 10 HP to 12.5 HP Capacity complete all as specified and directed.
S&F in repair of following size column pipe both side flanged GI Medium grade ISI marked ( Each of 3 m length) including taking out old corroded column pipe both side flanged complete all as specified and directed.
80 mm bore
65 mm bore
50 mm bore
Material and labour for servicing chlorine dosing system of any make and any capacity including servicing/rewinding of pressure pump of any capacity and duly paint by two coat of enamel paint complete all as specified and directed. (Note:- Dismantalling all connections from existing pipe lines and reassembling after proper servicing will be included in above quoted price. Cost of metal clad box with 20 Amp MCB and electric wiring with 3 core 4 sqmm cable will be included in above quoted rate. Cost of all plastic pipes/flexible pipes and valves of any type will be included in above quoted price.)
Dewatering of OH RCC Tank capacity 100000 Litre scraping scalp, fungus, loose dirt etc and surface cleaning with using bleaching powder first and then with the plain water complete all as specified and directed.
Dewatering of underground RCC sump capacity upto 1 Lakh Litre scraping sculp, fungus, loose dirt, mud etc and cleaning with using bleaching powder first and then with the plain water complete all as specified and directed. Note for item no. 54 to 55 :- (a) The Job should be completed within 8 Hrs of time after taking over the site.(b) The site will be given by Engr-in-charge after consultation with user. However the same will be intimated to contrcator a day prior to the work to be started at site so that to make necessary arrangement of material and labour. (c) Necessary T&P, scaffolding for cleaning of OH Tank if required, diesel operated pump set , hose pipe and bleaching powder (except water) required for cleaning of sump/OH Tank to be arranged by contractor with in the overall cost quoted.(d) Date of cleaning to be writtern in white letter not less than 10 cm with black base as directed by Engr-in-charge.
Collection, packing & forwarding for testing of water sample from different locations under GE south jaipur from authorised State govt lab/Central govt approved lab CTL as per IS-10500/2012 for drinking water complete as per specified and directed by engr in charge. (Note:- sample will be collected as per requirement from different locations and water testing report will be submitted to AGE E/M-III office by contractor within 07 days of sample collection.)
SHREE BHAGWATI ENTERPRISES
M/S TRADE LINKERS
Shree Karni Electrovision
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .