Loading
Loading…
Loading…
| # | Company | Amount | Status |
|---|---|---|---|
| 1 | ₹18.8 Laccepted-finance | accepted-finance |
Tender Value
₹17.9 L
EMD Value
₹44,900
Closing Date
6 Jan 2026, 11:00 pmClosed
Karnataka Power Transmission Corporation Limited
Srinivas T
Providing additional 03 Nos of MCVCB at 66/11kV Madikeri Substation in Madikeri Taluk, Kodagu District.
KPTCL/2025-26/SS/WORK_INDENT2778
KPTCL/2025-26/SS/WORK_INDENT2778
Open
Sub-Station
Two Tender Document System(Two Cover)
KPTCL CEE Transmission Zone Office Mysuru
12 documents required · 12 mandatory
The Bidder shall be registered firm as Sole Proprietorship/Partnership/Pvt Ltd Company etc
For other than proprietorship, the Bidder shall furnish the registered partnership deed and Power of Attorney
Tenderers who meet the specified minimum qualifying criteria, will only be qualified, if their available tender capacity is more than the total tender value. The available tender capacity will be calculated as under:Assessed Available Tender Capacity: (AxNx2.5-B)Where A-Maximum value of works executed (KPTCL & Non-KPTCL) in any one year during the last five years (updated to FY 2024-2025) taking into account the completed as well as works in progress. N-Number of years prescribed for completion of the works for which tenders are invited.B-Value, at FY 2024-2025 price level of existing commitments (KPTCL & Non-KPTCL)and on-going works (KPTCL & Non-KPTCL) to be completed during the next 1(One)year.Note:(i)The statements showing the value of existing commitments and on-going works as well as the stipulated period of completion remaining for each of the works listed should be countersigned by the Employer in charge, not below the rank of an Executive Engineer or equivalent.(ii)A self-declaration is to be uploaded by the Tenderer stating that the information with regard to assessed available tender capacity (Works on Hand) furnished are correct.
Minimum Average Annual Turnover (MAAT) of the bidder for best two(02) year out of preceding five financial years, shall not be less than Amount Put to Tender as per 3.2(a) of std tender documents(ITT).
valid Super grade Electrical Contractor License issued by the Government of Karnataka as on the date of opening of techno-commercial bid (refer 2.3 of ITT)
Even though the Tenderers meet the above criteria, they are subject to be disqualified if they have:- Made misleading or false representations in the forms, statements and attachments submitted in proof of the qualification requirements and/or- Record of poor performance such as abandoning the works, not properly completing the contract, inordinate delays in completion, litigation history, or financial failures etc. and/or- Participated in the previous Tender for the same work and had quoted unreasonably high Tender prices and could not furnish rational justification.
Bidder shall ensure that soft copies of Power of Attorney, Letter of Undertaking, No Deviation CERTIFICATE as revised in Annexure , Any other undertaking / agreement (if applicable) are to be uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date as per 3.10(xviii) of ITT
Bidder shall ensure that soft copies of i. Letter of undertaking for Non performance ii. Letter of undertaking for Risk and Cost iii. Letter of undertaking for Litigation iv. Letter of undertaking to source the supply of equipment material from KPTCL approved Vendors only (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date as per 3.10(xviii) of ITT
i. Letter of undertaking to source the equipment/material for the work from the approved Vendors who meet the eligibility clauses regarding restrictions on procurement from a country which shares a land border with India (Annexure-XVI) ii. Letter of undertaking as per clause No.1.5 of Annexure-XVII iii. Letter of undertaking as per clause No.1.6 of Annexure-XVII (if applicable) are uploaded besides submitting the Originals to the office of the Chief Engineer, Electy., Operation, KPTCL, Mysuru, after the last submission date and on or before the date and time of opening of techno commercial bids.
ESI certificate
EPF Certificate
Shall upload valid GST Certificate and PAN copy
₹500
₹44,900
6 Jan 2026
24 Dec 2025
8 Jan 2026
3 Jan 2026
30 Dec 2025
Supply Estimate
11kV UG cable 3 core 240 sq.mm for connecting 11kV DP to 11kV feeder MCVCB(105mtrX3F)
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240 sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
1.1 kV class Armoured Copper Cables
4core x 2.5 sqmm Copper Control cable for DC supply and PT Supply extension
1.1 kV class Armoured Copper Cables
4core x 6sqmm Copper Control cable for AC supply extension
1.1 kV class Armoured Copper Cables
19core x 2.5sqmm Copper Control cable
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL along with H frame for mouting GOS Set, 11 kV, 400 Amps Double Break GOS.
9 kV, 10 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR
Pad Clamps for coyote
Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Terminal Blocks (knife type)
(6 TB's per Feeder) = (6x 3nos =18 )
Current Cable - 2.5 Sq-mm multistrand copper wire for CT termination
Voltage Cable - 2.5 Sq-mm multistrand copper wire for PT termination
Control Cable - 10 Copper core x 1.5sqmm for DO connections
Signal Cable - 10 Copper core x 0.5sqmm for DI and RS485 Connectiones
1.5 Sqmm Grey wire for interfacing of DI and DO
Supplying tinned copper lugs and crimping and wiring to terminal point for wire of the size 2.5 sqmm
C-type channel of size 50x100x50x6mm
(50cm/panel) = (0.25m x 5 nos =1.25 Mtrs)
Supplying and fixing of heavy duty cable glands suitable for cable of 1.1 KV class (metal only)
CT TB's - 6 nos for each panel
(6 Nos 3 Feeder = 18 nos) for new connection
Erection estimate
11 kV MCVCB, 500 MVA, 31.5 kA, 1600A with CTs 400-200/1-1A, Scada compatible ( Inclusive of F&I charges and applicable PVC @ -0.38 % ) ( Excluding GST )
Annunciator Panel for 3F
Adapter Panel for MCVCB [Adapter Panel (1600 A)]
(Suitable for 25kA STC MEI Make Breaker to 31.5kA STC MEI Make Breaker)
Testing and Commissioning of Switchgears
11kV UG cable 3 core 240 sq.mm for connecting 11kV DP to 11kV feeder MCVCB(105mtrX3F)
Heat shrinkable type Cable termination kit for XLPE CABLE-INDOOR-3X240 sq.mm
Heat shrinkable type Cable termination kit for XLPE CABLE-OUTDOOR-3X240 sq.mm
1.1 kV class Armoured Copper Cables
4core x 2.5 sqmm Copper Control cable for DC supply and PT Supply extension
1.1 kV class Armoured Copper Cables
4core x 6sqmm Copper Control cable for AC supply extension
1.1 kV class Armoured Copper Cables
19core x 2.5sqmm Copper Control cable
DP Structure with RCC Pole - 9 Mtr Long, 145 Kg WL along with H frame for mouting GOS Set, 11 kV, 400 Amps Double Break GOS.
9 kV, 10 kA Lightning Arrester Metal Oxide Ceramic type with GROUND DISCONNECTOR
Base concreting 1:2:4, 650x650x150 mm
Pole concreting 1:2:4, 650x650x1700 mm
Coping 1:2:4 (as per actuals)
Grounding of equipment by providing cast iron pipe of 100 mm ID 13 mm thickness, 2.75 metre long with 2 part clamp out of G.I. Flat 50 X 6 mm continuously welded alround the pipe using cast iron weldi...
Grounding of equipment with 50 x 6 mm G.I. Flat and connecting equipment to the earthmat/ground pit. Each point of earthing with all formation works like bending, twisting,
drilling of holes and conne...
Supplying & providing 450 mm dia 450 mm height 1.5" to 2"
thick hume pipe collar (non pressure type) for earth pits
including all lead and lifts etc.,
Multi Function Transducers(MFT)
As per KPTCL Std, Interface: RS-485 Daisy Chain to RTU Com port,wiring: Both 3ph 4wire, supply: self powered, Measuring range voltage: 120%, current: 120%, frequency: 4...
Input Vtg:110V DC, input indicated by LED, input range 110VDC to 140V DC, sourcing Vtg output 48VDC, No of iputs: 12, No of outputs: 8, Source current: 5mA, at output, 8way switch to be p...
Control Cable - 10 Copper core x 1.5sqmm for DO connections
Signal Cable - 10 Copper core x 0.5sqmm for DI and RS485 Connectiones
CT TB's - 6 nos for each panel
(6 Nos 3 Feeder = 18 nos) for new connection
Configuration of RTU and Engineering along with validation of data at SLDC
Earth work excavation for Foundation by manual means for all works & depth upto 3 m, as per drawing and technical specifications, including setting out, shoring, strutting, barricading, caution lights...
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations and other similar works etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by r...
Providing and laying in position Cement Concrete for levelling course for all works in foundation. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes...
Providing and laying in position Cement Concrete for all Foundation works. The granite/trap/basalt crushed graded coarse aggregates and fine aggregates as per relevant IS Codes machine mixed with supe...
Steel Fabrication: Supplying, fitting and placing TMT FE 550 / 550D Steel Reinforcement including cost of all materials, machinery, labour, cleaning, straightening, cutting, bending, hooking, laping/w...
Providing and fixing Structural Steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting in position and applying a priming coat of approved stee...
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
Work on Hand details format.doc
Others - others • 0.06 MB
Circular Guidelines.zip
Others - others • 2.08 MB
NIT - Madikeri.pdf
Instructions to Tenderers • 0.65 MB
Tender documents- Madikeri.pdf
Tender Document • 1.95 MB
Volume II A B.zip
Others - others • 19.19 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .