SPECIAL REPAIRS OF SECURITY FENCE AROUND THE PERIMETER OF 636 SATA BTY AND CERAIN LBW AND MINOR WORKS UNDER THE AOR OF GE DEOLALI

Amount

Excavating in post holes (or similar holes) each n exc 0.5 cum, getting out, returning,filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in any type of soil incl removing surplus soil to a distance n exc 50 m and making good complete all as specified and directed incl clearing all grass,vegetation, shrubs etc.

Dismantling of posts or struts (wood, steel or RCC) any section embadded in concrete, including taking out embedded portion and making good of disturbed ground all as specified and as directed.

Dismantling of fencing wire mesh,barbed wire any type complete all as specified and directed.

Material and labour for PCC (1:4:8), type D2 using 40 mm graded stone aggregate as in posts (including caps & bases), foundations filling and mass concrete including necessary formwork complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plan exc 6 m mean radius, built in CM (1:6) complete all as specified and directed.

Supply and fixing mild steel work as in posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or rivetting etc. and similar works conforming to Fe-290 (Gde E-165) complete all as specified and directed by Engineer-in-Charge. Note:- 1. Flat iron for securing wire mesh to be provided is to measured in this item. 2. Machine made screw bolt 10mm dia exceeding 5cm and not exceeding 10cm long shall be measured and paid seperately.

S & F for Mild steel round bars 10mm dia and over, cut to length, bending, spirally for hooping columns, hooking ends as sag rod complete all as specified and directed.

S&F for 110mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors, or inside wall set in cement mortar complete all as specified and directed.

S&F for galvanized 2 strand steel barbed wire 2.24mm dia barbed with 2mm dia barbs @ 75mm spacing and strining and fixing to any type of standard rails straining bolts, including securing or type at crossing etc complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provision of binding wire complete all as specified and directed.

Supply only chain link MS galvanised fencing, any size or type complete all as specified and directed. Note : Flat Iron, round bas, nut bolts and washers shall be measured and paid separately.

S&F for 11 to 15 mm dia shank mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, n exc 5cm long complete all as specified and directed.

M&L for preparation of New or previously untreated steel surface of any description over 10cm girth or width, not otherwise describedandand applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling structural steel work including doors, gates, fencing post etc but excluding framed trusses complete all as specified and as directed.

Supplied and fixed for framed work as in doors or gates of angle/hollow section or other section with gusset Plate, rails,braces etc complete drilled for fixing of steel sheeting or other covering doors etc to be prepared for hanging or sliding with and including either hooks and hinges and door fittings necessary rivetting/welding cutting up complete steel conf. to Fe-410-0 or Fe-310-0 all as specified and directed. Note : Disturbed surfaces of wall shall be made good to true surface.

Preparation of New or previously untreated steel surface of any description n exc 10cm girth or width, not otherwise describedand applying two coats of synthetic enamel (ordinary tint) over one coat of red oxide primer complete all as specified and directed.

M&L for rendering 15mm thick on fair faces of brick work of concrete surfaces in CM (1:4) , finishing the surfaces even & smooth without using extra cement complete all as specified and directed.

M&L Preparation of new plastered surfaces of walls and applying two coat of white was complete all as spd and directed.

M&L for cement concrete 1:2:4 type B1 (20mm graded aggregates) as in coping/benching including necessary form work and finishing exposed surfaces of concrete even and smooth without using extra cement complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc1.5 m in depth and getting out soft/loose soil complete all as specified and directed.

Returning, filling in, includingspreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and directed.

Removing of surplus excavated material exc 50 m but not exceeding 100m and depositing where directed at a level not exceeding 1.5 m above the starting point etc complete all as specified and as directed.

Removing excavated material exc. 250 m but n exc. 500 m anddepositing where directed complete all as specified and directed.

M&L for cement concrete 1:5:10 type E2 (40mm graded aggregates) in foundations, filling and mass concrete complete all as specified and directed.

M&L for Reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (20 mm graded aggregate) in Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under reamed piles and mass concrete

M&L for Reinforced cement concrete (nominal mix) Type A1 1:1.5:3 (20 mm graded aggregate) in columns, pillars, piers, posts and struts complete all as specified and as directed.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and as directed.

Formwork to sides of pillars, posts, struts, piers, columns, and stanchions complete all as specified and as directed.

M&L for TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L TMT steel bars 6 to 8 mm dia, cut to length, bent to shape required, incl cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips etc as specified and directed.

M&L for TMT steel bars 5mm and over upto and including 10mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips in stirrups, spacers and binders complete all as specified and as directed.

Preparing New plastered or unflustered surfaces of wall and applying two coats of cement based paint over a coat of primer.

S&F for framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 for portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc for ornamental and intricate design.

S&F for steel work in tubular trusses, columns, beams, battens, lacings including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240

M&L for 1.25mm thick Mild steel, plain black sheet in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required

M&L for 15mm to 18mm thick granite (any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms and like in 10mm thick CM (1:4) backing coat including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and as directed.

M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick spread, levelled and rammed including watering complete all as specified and as directed.

M&L for Hardcore of broken stone or boulders of gauge n exc. 63 mm,deposited,spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and as directed.

Providing, cement concrete type B1 1:2:4 (20 mm graded aggregate) in lintels upto 1.5 m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs not provided for in Item 04028, water troughs and the like including weathering, slightly rounded for chamfered angles and throating with necessary formwork, complete all as specified and as directed.

M&L Surface excavation as in Hard /dense soil not exc. 30 cm deep and averging 15 cm deep and getting out complete all as specified and as directed.

Excavating over areas for soft /loose soil, n exc 1.5 m deep and getting out complete all as specified and as directed.

Excavating over areas for soft /loose soil, exc 1.5 m bot n.exc 3.00 m deep and getting out complete all as specified and as directed.

M&L providing cement concrete (1;4:8) type D2 using 40mm graded agg in foundation filling & mass concrete complete all as specified and as directed.

Cement concrete work in pavement/hard-standing of flexural strength 40 kg/per square centimetre in field using 400 kg of cement per cubic metre, thickness of concrete 25 cm or less etc all as specified and directed.

Formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands walls, horizontal or sloping, and similar work all exceeding 20cm wide.

M&Lfor providing broom finished surface of concrete pavement white concrete is green complete all as specified and as directed.

M&L for Forming Contraction (Dummy) joints 65 mm deep x 10mm wide, filled with sealing compound etc complete all as specified and as directed.

M & L for Forming Construction joint 30mm deep x 10mm wide filled with sealing compound etc complete all as specified and as directed.

M&L RCC M-30 (Design Mix) Foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc; basement slabs, under-reamed piles and mass concrete all as specified and as directed.

M & L RCC M-30 Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and as directed.

Formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and similar work including attached pillasters, buttresses, etc.; vertical or to batter and fair finishe surafae, complete all as specified and as directed.

M&L for 15 mm thick rendering in CM 1:4 on brick/concrete external surfaces of walls sand faced sponge faced finish etc complete all as specified and as directed.

Supply only water proofing compund complete all as specified and as directed.

M&L for mild steel work tubular pipes as in stanchions incl special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I.S.1161-1979 grade St.-240 etc complete all as directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified etc complete all as specified and directed.

M&L preparation of newly steel surfaces exc 10cm width or girth and applying 2 coats of synthethic enamel paint over a coat of primer etc complete all as specified and directed.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 10 sq mm 2 core complete all as specified and as directed.

Supply & lay in trenches double walled corugated HDPE pipe 50 mm dia for protection of under ground cables( Note: pipe couplers with seal, bends, end covers etc are deemed to be included in rate quoted)

Supply & fix Thermo plastic street light sintex box of size 280 X 170 X 130 mm Cat No GS-JB-2817 top Hinged ( or equivalent make of National) wiith 4 way connector mounted on epoxy insulators for looping of cable for 3 Phase and 1 neutral fixed on pole with the help of MS nuts bolts and MS clamps-1 Nos of size 40 mm X 4 mm thick with one No MCB SP 6 Amp capacity mounted on din rail inside box complete all as specified and as directed.

S&F Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 LED flood light 70 watt suitable for highlighting architectural facade and general purpose lighting.

M&L for sub main wiring with two single core FRLS stranded copper conductor cable 1100 volts grade of size 4.0 sqmm and one single core FRLS stranded copper conductor cable 4 sqmm for earth wire in and including medium grade PVC concealed conduit with all fittings complete all as specified and directed.

M&L for cutting steel tubing to required length for insertion of new Tee Branches, reducer in any position of 15mm dia pipe line complete all as specified and directed.

S&F in sheet metal enclosure single pole and Neutral with a two pin earth plug and socket complete with a MCB SP 10 Amp 220 volts, 50 Hz, 10KA breaking capacity, including fixing completly in wall with sutable sand and cement, complete all as specified and directed.

S&F tubes, 'medium grade', galvanised, with all fitting; for fixing concealed in wall complete of 15mm dia with complete fitting and fixture complte all as specified and directed.

S&F of Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed of cap 15mm dia complete all as directed

S&F Bib taps, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed of cap 15mm dia complete all as directed

S&F PVC connection 15 mm size for cold water with PTMT nuts of length 450 mm complete all as specified and directed.

S&F CP connection 15 mm size with for hot water with PTMT nuts of length 450 mm.complete all as specified and directed.

S & F Geyser 25 Ltrs, vertical mount, 5 star rated, glass line coated tank with adjustable thermostat, suitable for ,230 volt, 2 kw , 50 Hz electric supply .

S&F stop valves 15 mm bore CP With crutch or butterfly handle, screwed both ends for iron pipe or unions, complete all as directed.

M&L MCB SP 6 to 32 Amp "C" curve complete all as specified and as directed.

Note: Amount of sch of credit of Rs.32460/-will be deducted from total amount of BOQ.

M/S B R BHALERAO (BID ID -3222164)

M/s. JBSR ENTERPRISES. (BID ID -3227233)

M/S MANISH CONSTRUCTION CO (BID ID -3221928)

M/S Chandan Construction Company (BID ID -3227752)

RANMALE DEVELOPERS (BID ID -3218798)