Supplying of water by constructing Pump House at Arjun Dam for Kulpahar Sprinkler Irrigation project for PPA of 1350 hectare including all activities starting from Engineering, procurement etc including 3 year maintenance after completion of work.

Amount

(i) Earthwork in Excavation of foundation in all type strata such as M.K.R soil, D.R.. and hard rock mixed with soft rock labour , Tool and Plants including proper making of section & dressing , disposal of material for proper completion of work as per dirction of Enginner in Charge .

(ii) Earthwork in Excavation of foundation in all type strata such as M.K.R soil, labour , Tool and Plants including disposal of material for proper completion of work as per dirction of Enginner in Charge .

(i)Earthwork in excavation in trench for laying rising main and pipe networks .In depth as per approved L- section with levelling and aligning the bed by cutting and dressing in M.K.R. mixed soil including all lead and lift,.labour, Tool & Plant complete etc as per direction of Engineer-in-charge.

(ii)Earthwork in excavation in trench for laying rising main and pipe networks in depth as per approved L- section with levelling and aligning the bed by cutting and dressing including M.K.R. soil, DR and hard rock mixed with soft roc with crowbars with proper dressing inluding all lift and lead , labour T&P with proper completion of work as per dirction of Enginner in Charge .

Earthwork in filling in MKR and kankar mixed soil in embankment including all lead & lift with proper making of section and dressing with mechanical compaction ,all labour and T&P with proper completion of work as per direction of engineer in charge

Backfilling the trenches in layers not exceeding 300 mm, each layer shall be consolidated by watering and ramming without disturbing the pipeline etc. complete (the backfill on two side of the pipeline should be carried out simultaneously)as per direction of Engineer in charge.

Providing and laying Soling by using 40-63 mm size granite ballast in 15 cm layer including hand packing filling voids with local quary sand ,etc. complete as per dirction of Enginner in Charge .

Providing and laying local quary sand in 15 cm layer including all lead and lift,.labour, Tool & Plant complete work etc as per dirction of Enginner in Charge .

Providing and Laying C.C. 1:3:6 (M10) including mixing, placing of concrete, mechanical vibration and curing with cost of all material, labour, Tool & Plant etc. as per direction of Engineer-in-charge.

Providing and Laying C.C. 1:2:4 (M15) including mixing by Batching plant, placing of concrete, mechanical vibration and curing with cost of all material, labour, Tool & Plant etc. as per direction of Engineer-in-charge.

Providing and Laying C.C. 1:1.5:3 (M20) including mixing by Batching plant, placing of concrete, mechanical vibration and curing with cost of all material, labour, Tool & Plant etc. as per direction of Engineer-in-charge.

Providing and Laying in . C.C.1:1:2 (M25) including mixing by Batching plant, placing of concrete, mechanical vibration and curing with cost of all material, labour, Tool & Plant etc. as per direction of Engineer-in-charge.

Providing and fixing Centring & shuttering for T-beam & columns special type of R.C.C. sypon and pump houses including all materials & T&P in Side foundation ,footing surfaces ,Vertical Surfaces , Inclined surface, wall, etc. including cost of all material, labour and T&P complete etc. as per direction of Engineer-in-charge.

Providng and fixing centering & shuttering for plain C.C. work including cost of all material, labour and T&P complete etc. as per direction of Engineer-in-charge.

Dewatering in foundation for construction of structures ,channel , laying pipe line with providing Dewatering pumps (supply/ hire), inclduing cost of fuel ,labour & T&P etc. as per direction of Engineer-in-charge.

Providing and fixing steel reinforcement for R.C.C. work including cutting, bending, placing and binding with G.I. wire including its cost etc. as per direction of Engineer-in-charge.

12.5 mm thick cement plaster in single coat on fair side of brick /stone /concrete walls for interior plastering upto floor two level I/c arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80mm in girth and finished even and smooth in cement mortar1:4 (1 cement :4 sand)as per direction and to the entire satisfaction fo Engineer-in-charge upto all lead and lifts.

Brick work using common burnt clay 1st class building bricks in supper structurs above plinth level upto floor two level in cement mortar 1:4(1 cement :4 sand) as per direction and to the entire satisfaction of Engineer-in-charge upto all lead and lifts.

Providing. and Fixing Ladder 600mm Wide in 3m Stages , Sq. Pipe of 50 x 50 x 5 in jack well as per drawing including cost of all material, labour and T&P complete etc. as per direction of Engineer-in-charge.

Supply , Laying , jointing and testing HDPE pipe in standard length confirming to I.S. 4984 , I.S. 7634 etc . including cost of Transportation , fright charges , inspection charges ,loading unloading charges , conveyance to departmental store / site and stacking the same , sand cusion of 15 cm thick all arround the pipe etc. Complete in all respect to the operational form as per direction of Engineer in charge.

HDPE pipe 1200 mm PE 100 pipe PN6, IS-4984

HDPE pipe 1000 mm PE 100 pipe PN6, IS-4984

HDPE pipe 900 mm PE 100 pipe PN6, IS-4984

HDPE pipe 800 mm PE 100 pipe PN6, IS-4984

HDPE pipe 710 mm PE 100 pipe PN6, IS-4984

HDPE pipe 630 mm PE 100 pipe PN6, IS-4984

HDPE pipe 560 mm PE 100 pipe PN6, IS-4984

HDPE pipe 500 mm PE 100 pipe PN6, IS-4984

HDPE pipe 450 mm PE 100 pipe PN6, IS-4984

HDPE pipe 400 mm PE 100 pipe PN6, IS-4984

HDPE pipe 355 mm PE 100 pipe PN6, IS-4984

HDPE pipe 280 mm PE 100 pipe PN6, IS-4984

HDPE pipe 250 mm PE 100 pipe PN6, IS-4984

HDPE pipe 180 mm PE 100 pipe PN6, IS-4984

HDPE pipe 160 mm PE 100 pipe PN6, IS-4984

HDPE pipe 160 mm PE 100 pipe PN4, IS-4984

HDPE pipe 140 mm PE 100 pipe PN6, IS-4984

HDPE pipe 125 mm PE 100 pipe PN6, IS-4984

HDPE pipe 110 mm PE 100 pipe PN6, IS-4984

HDPE pipe 90 mm PE 100 pipe PN6, IS-4984

Supplying fixing and commissioning C.I. temper proof double orifice type kinetic air valve manufactured by ISO 9001 certyfied manufacturing company , body and seat ring of bronze confirming to I.S. 14845 of specified diameter with all fixtures including all textures , third party inspection , transportation , loading unloading etc. complete.

Air release valve 4" in Rising main

Air release valve 6" in Rising main

Providing and fixing of controll valve with chamber etc. as per I.S. code and specifications in providing and laying of Rising main Complete in all respect to the operational form as per direction of Engineer in charge.

Providing and fixing of Outlet assembly with Outlet assembly 2.5 " with 10" valve box in distribution networks .etc as per I.S. code and specifications in 1350 Ha. Area Complete in all respect to the operational form as per direction of Engineer in charge.

Providing and fixing C.I. Gate Valve 80 mm -IS 1538 , 10 Kg/cm2 in distribution networks etc as per I.S. code and specifications in 1350 Ha. Area Complete in all respect to the operational form as per direction of Engineer in charge.

Providing and fixing Valve Chamber for ditribution network @ 8 nos per 40 ha chak. in distribution networks etc as per I.S. code and specifications in 1350 Ha. Area Complete in all respect to the operational form as per direction of Engineer in charge.

Providing HDPE Fittings (1200 mm dia to 160 mm dia ) for Rising Main by providing Non Return valve (reflux valve), C.I. Scour valve, pressure gauge ,controll valve , air cum vaccum release valve , surge equipment , valve boxes , thrust block ,as per I.S. code and specifications in providing and laying of Rising main Complete in all respect to the operational form as per direction of Engineer in charge.

Providing HDPE Fittings (160 mm dia to 90 mm dia ) for 1350 Ha Area (25 nos@40ha. chak) Sprinkler Nozzle (Metal/Plastic),Riser Pipe (Metal/Plastic) , Sprinkler PE Bend ,Sprinkler Riser Adapteras, Sprinkler PE TEE, Sprinkler PE End Cap, Sprinkler PE Reducer, Sprinkler PE Lach and Clamps Metal/Plastic, Sprinkler Rubber Rings, Sprinkler Outlet Complete Assemble (TEE Bend Wall Sprinkler Pipe Adapter) , Sprinkler male Pump Connecting /Adapter, Sprinkler Female Adapter/Connector ,Sprinkler PE Pipe, One Hactare Control Valve Metal/Plastic ,HDPE Network Pipe (250mm-75mm), HDPE Fittings ,Pressure Guage, thrust block as per I.S. code and specifications in providing and laying distribution network, Complete in all respect to the operational form as per direction of Engineer in charge.

Providing and Installation of V.T. Pump with discharge 322.50 lps ,head 40 m, 1 satge , motor rating 250 KW /4P as per design and drawing Complete in all respect to the operational form as per direction and satisfaction of Engineer in charge.

Supply & Installation of 1200 mm delivery (15m) and 350 mm Dia Sluice pipes with installation , 1 No. EOT (Electrical Operated Gantry Crane 1T capacity) , 1 No. DG set 10 KVA having output power 487 B.H.P. with alternator mounted on a common base and A.M.F.conroll pannel, 1000 KVA voltage stabilizer, LT Control Panel 1600 AMP Supply, Voltage Stabilizers, LT Control panel including cables & Switces etc., Earthing providing/fitting of pole light, fixtures , electrification , complete in all respect. Testing & commissioning of pump sets, suction delivery pipes, rising main voltage stabilizers, etc. complete in all respect to the operational form as per direction of Engineer in charge.

Automation of Pump House (at pump house upto 20 ha) including providing PLC with HMI and Controll pannel ,SCADA Software , VFD 250 KW, Motorised Butterfly Valve 1200 mm, Ultrasonic Flow Transmitter 1200 mm,Ultrasonic level transmitter (12 m) ,Pressure tranmitter 0-16 bar, Computor system ,Online ups 2 KVA ,Surge anticipating valve 300 mm ,Vibrator Sensor ,Temperature Scanner , Alram Annunciator , Electrical cable ,earthing fitting and accessories,Weather Station including sensors etc.as per I.S. code and specifications , Complete in all respect to the operational form as per direction of Engineer in charge.

Automated Block Distribution System (ABDS) Automation 20 ha to outlet to 2.5 ha .(including cost of SCADA, valves, bends,manifolds, controlls, outlet management system, outlet with manual valve at 1.0 ha.icluding communication , protective enclosures and solar power with 3 days backup etc.) as per I.S. code and specifications , Complete in all respect to the operational form as per direction of Engineer in charge.

Solar power plant of 1.5 MW up to HT Line comlpete work ( the detail of work mentioned as follows)

Supplying , fixing and Installation of 4687 Nos. Ground polycrystalline silicon Solar PV Modules (325 Wp) having 72 cell with Peak Power rating >2 Wp, Module efficiency >15.50% Panel associated cabling, earthing etc. should be along with RFID tag (preferably inside the lamination). The panel output (Wp) capacity to be >90% of design nominal power at end of 10 years. Linear Degradation Warranty for first 10 years shall be provided and degradation/year is specified and warranted. The PV modules used in the grid solar power projects must qualify to the latest edition of any of the following IEC PV moudule qualification test or equivalant BIS standards. Crystalline Silicon Solar Cell Modules IEC 61215. In addition PV modules must qualify to IEC 61730 for safety qualification testing @1000V or higher. The PV modules must also qualify IEC 61701 througout their lifetime etc. as per Relevant I.S. code , manual and specification complete in all respect to the operation form or as per the directions of Engineer in Charge.

Supplying fixing and installtaion of the solar Module mounting structure for fixed tilt with required foundation, earthing etc., complete in all respects. The Module mounting structure should be hot dip galvanized steel with a minimum alloy Non-corrosive and electrolytically ally compatible with the mounting structure materials. Structural steel shall confirm to grade A of IS:2062 for rolled steel members or plants up to 20 mm thickness. The MMS will confirm to the technical specification with supply of all requisite materials. The structure should ensuring stability and wind withstanding capacity and fixing to the substructure. The civil works will include designing, construction of foundation base for holding the module structure, excavation, concreting, back filling, shoring and shuttering, as per Relevant I.S. code , manual and specification complete in all respect to the operation form or as per the directions of Engineer in Charge.

Supplying fixing and Installation of String Monitoring unit 16 way input and one output, with required foundation, associated cabling (power & auxilary supply), trench, earthing etc., complete in all respects. The efficiency of the inverter shall be equal to more than 96% at 75% load as per IEC 61683. Inverter should be three phase and shall have internal protection arrangements against lightning and earth leakage faults, over currents, over temperature, Sync loss and DC bus over voltage. Inverter shall have anti islanding protection. Inverter to folllow grid voltage, frequency up to +/-5% of the nominal outpr frequency during normal operation. Inverter shall have less than 2% THD (AC total harmonic distoration, No load less <1% of rated power and maximum loss in sleep mode shall be less than 0.05%.. as per I.S. code and specification in all respect or as per the directions of Engineer in Charge.as per Relevant I.S. code , manual and specification complete in all respect to the operation form or as per the directions of Engineer in Charge.

Supply & Installation of 1 no. Weather monitoring system including 1 no. Rain Gauge to measure rain fall in millimetres as per IS 4986, 1 no. Anemometer to measure wind speed in km/hr,1 no. Weathervane to measure wind direction in degrees as per IS: 10001, 1 no. soil temperature probe to measuring soil temp. in celsiuns, 1 no. Humidity sensor to measure air humidity in %age , 1 no. pressure guage to measure atmospheric air pressure in Pascals as per IS: 3624 and air quality sensor to measure air quality in relative %age or any other item required for complete functioning of weather monitoring system as per I.S. code and specification in all respect as per IS code and directions of Engineer incharge.

Supply the Power evacuation system with required foundation, associated cabling (power & auxilary supply), trenching, earthing etc., as per I.S. code and specification complete in all respects as per the detailed technical specification and as per the directions of Engineer incharge

Construction of 1 Nos. Inspection cum Control Room and Guard room (as per drawing) with required lighting, air conditioning, auxilary power supply for equipments also with UPS backup, associated cabling, trenching, earthing, sanitary, drainge & water supply system etc. any other item associated for complete setup as per I.S. code and specification in all respects as per directions of the Engineer In charge.

Providing and installtion automated Module cleaning system with motorized spray , brush including self driven motorised control system for cleaning of PV module including all neccesary item etc. complere in all respect as per the detailed technical specification. etc., as per I.S. code and specification complete in all respects as per the detailed technical specification and direction of Engineer incharge

Supply Erection and commissioning HT line from Solar power plant to proposed sub-station near dam , including insulaters, transmission line & its allied structure against lighting as per IS: 3043, Bus bar, main switch gear, switch fuse, meters, distribution system , cabling as per IS-692, & 1694 or latest as per I.S. code and specification in all respect or as per the complete satisfaction and as per the directions of Engineer Incharge

Providing & fixing protection wire mess along the boundary wall as per drawing, construction of pawer block path cum approach road from main entrance to the control room and along the boundary fence provision of cctv cameras at all the entry & exit points and prominent threat areas , MS entry/exit gate along with fire protecttion system etc. complete in all respect to the operational form as per relevent IS code, mannual and specifications and as per direction, entire satisfaction of Engineer in charge.

Supplying the SCADA & PLC system with associated cabling trench, earthing etc., complete in all respects, as per the detailed technical specification.

Sprinkler Irrigation set with all system and fitting accessories complete in all respect etc as per direction of enginner in charge for 1Ha chak , providing installation as per the directions of Engineer Incharge.

Providing Inspection Vehicle 2nos. for officers and officials including fuel cost of running 4000 km per month , maintenance and operations as per the directions of Engineer Incharge

Providing and laying granite stone boulder (40-60 kg ) in pitching including cost of all material labour and T&P required for proper completion of work as per the directions of Engineer Incharge as per the directions of Engineer Incharge