Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹6.5 LAccepted-Finance | L1 | Accepted-Finance Lowest quoted | |
| 2 | L2₹6.8 L+₹30,686.36 (4.73%)Rejected-Finance NULL | L2 | Rejected-Finance Highest quoted |
Tender Value
₹7.8 L
EMD Value
₹7,800
Closing Date
4 Mar 2025, 3:00 pmClosed
THE COMMISSIONER
Salem City Municipal Corporation, Fort Main Road, Salem.
Construction of Brick Chamber and attending Electrical, water supply arrangments and Motor repairing work to the Shevapet Burial Ground MCC Centre Unit - 1,2,3 in Div. No 28 Suramangalam Zone,Salem City Municipal Corporation
2025_MAWS_527831_1
E6-Est No 51-B-2024-2025
Open Tender
Civil Works
Lump-sum
30 days
Salem city Municipal Corporation
Please refer Tender documents.
1 document required · 1 mandatory
₹0
₹7,800
29 Jul 2025
25 Feb 2025
4 Mar 2025
25 Feb 2025
4 Mar 2025
25 Feb 2025
Amount
Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.
Cement Concrete 1:4:8 (One Cement, Four crushed stone sand and eight hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick, well rammed, consolidated and curing etc. complete complying with standard specification
Brick work in cement mortar 1:5 mix using Fly Ash bricks of 230x110x70mm (8 3/4" x 41/4" x 23/4") from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc. complete. Complying with std. specifications
Plastering with cement mortar 1:3 mix, 20mm thick including cost and conveyance of all materials to site, loading and unloading charges and labour charges for mixing, laying and curing etc. complete .
Providing granolithic floor finish of 25mm thickness with plain cement concrete 1:2:4 (One Cement, Two crushed sand (M-Sand) and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers)
Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
Flooring with Cuddapah slabs of 40mm thick over a base mortar in CM 1:3 (One Cement and Three Plastering Sand (P - Sand)) 20 mm thick and pointed with cement mortar 1:3 ( one cement and three Plastering sand) usimg Black oxide complying with standard specification.
Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges etc., complete as per standard specification
Electrical items for MCC Center:-
4 Pole Sheet steel enclosures for MCB's( M-1800 Twad-24-25)
Supply of Miniature circuit breakers 240V / 415V 50Hz-AC supply suitable for both Lighting and Motor load-Higher End -Four pole 63A, 10 KA
6 A-230V Switch 1W -1 Module. ( M-1415)
6 A-230V Socket- 2 Module.
16A -230V Switch 1W-1 Module. ( M -1420)
16 A-230V Socket- 2 Module.
18 M Combined cover plates (M-1495)
Flush Mounting Box GI - 18 Module Metal Box
supply and fixing of 48W LED street light fitting with LED (Higher end) with 32mm dia. GI pipe (class B) with 1 no.32 mm GI bend complete on the existing post/ on wall with PVC unsheathed copper leads with MS clamps and with painting .SD-448
20W 4 Feet LED Fitting with LED
Earthing arrangements with GI Earth plate including charcoal and salt with necessary excavation in all soils and to full depth as per may be required and masonry work, re-filling the sides of foundation with excavated earth as per the standard specification and as directed by the Departmental Officers.
18 M Combined cover plates
4 M Combined cover plates
Wiring with 2 x 1.5 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A FT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil)
Supply and clarnping of 2 x 10 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps SD-194
Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps SD-199
Supply and clarnping of 3-1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps SD-201
Suppy and Fixing of following Pipe and Specials etc
32 mm 10 kg per cm2 PVC Pipe
32 mm Elbow
32mm Brass Valve
32 mm GI Pipe
32mm GI Elbow
90 mm 6kg per cm2 PVC pipe
90 mm PVC Elbow
90 mm PVC T Joint
90 mm PVC Air Cowl
Quotation Items :-
Charges for removing of damaged PVC Pipes, Elbow and T joint and Refixing of 90 mm PVC Pipe, 90mm Elbow, 90 mm T joint including Plastering with cement mortar 1:3 mix work and all cost conveyance etc.
Painting two coats for Exterior surface with approved Synthetic Enamel paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification.
Charges for servicing of Rolling Shutter with replacement of 00 kg×600 mm size - 4 Nos of Spring, 4 nos of Bearing wheel,Gear box wheel,including labour, Scaffolding and all cost conveyance etc.
Supply and Replacemant of Existing 7.5 HP Three Phase DOL Starter for Cutting Motar at MCC Center Etc., Completed.
Charges for repair and reconditioning of Cutting Machine with replacement of P-213 Ball Bearing- 2 nos, B74 Belt-2 nos, Sharpening the cutter blades including labour, transport and all cost conveyance
Supplying and erecting in position of following 10.00 liters capacity Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water in Mcc Center Etc., Completed
MARIAPPAN RAJENDRAN CONTRACTORS (BID ID -1262739)
stage.html
html • 0.03 MB
tech_eval.pdf
fin_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .