Internal painting work in FHA area at NRB BARC Tarapur

Amount

Dismantling of RCC works carefully manually without damaging adjacent structures excluding cutting of reinforcement including stacking of steel reinforcement bars and disposal of unserviceable materials within 200 m lead as per direction of Engineer-in-charge

Providing and fixing double tubular scaffolding system using Hframes with cup lock type on the exterior side upto seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S. tubes, M.S. tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer -in - charge. The elevational area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding

Providing and laying Self levelling Epoxy flooring , including preparation of the surface, primer coat,screeding & levelling coat and finishing coat with Polyurethene coat of approved colour and shade of approved make all as per manufacturers specifications complete as directed at site by the Engineer-in-charge (This Job to be carried out through a specialized approved agency)

3 mm thickness

Providing and painting with Epoxy PU paint using 3 coats of (180 Micron dry film thickness) Epoxy PU high building coating of approved make as finishing coat over a priming coat of EPILUX-4 clear lacquer primer over concrete/ plastered surfaces at all locations prepared and applied as per manufacturer' specifications including preparation of surface by cleaning with wire brush and rubbing, scraping , applying sand paper , making free of dust, dirt etc. filling the holes, joint, cracks if any using epoxy putty complete. all as per manufacturers technical data and as directed at site to achieve minimum overall dry Film thickness of 180 micron (180 micron finishing coat) On CONCRETE surfaces

Providing and applying one coat of cement primer of approved brand on wall surface to receive specified paint including scaffolding complete all as per specifications and as directed by Engineer-in-charge

Providing , Wall painting with Two coat on old work flat oil paint of approved make to give an even shade including preparation of the surfaces, scaffolding complete. as per specifications and as directed by the Engineer-in-charge.

Providing and laying in position Reinforced Cement Concrete (RCC) of grade M-30 using 20mm maximum size aggregates and crushed sand of approved quality including admixtures of approved brand and quality (plasticiser or super plasticiser) if required, including weigh batching, mechanical mixing, transporting, placing, vibrating, consolidation, finishing, curing etc. complete but excluding the cost of centering, shuttering and reinforcement complete as per specifications up to Plinth Level.

Providing, centering, shuttering Form work using steel plates, timber planks for all types of structures including necessary strutting, proping, staging, supports, bracings etc. and deshuttering the same after the specified time all as per drawings, specifications and as directed by the Engineer-incharge at all levels For Sub Structure

Labour charges for providing and fixing SS. Sieve around tank for M.S. Railing anchored by 2nos of 12mm dia Anchor fastner Complete all as per direction of EIC.

16 mm diameter 75 mm Long

Supplying of following materials for executing painting works at various location of the plant as per specification or as per instruction of E.I.C at site Note: 1) Paints shall be of following approved make 2) Berger paints/ Asian Paints/ Shalimar Paints/ ICI paints/ ICI indi Ltd/ Nerolac paints. 3) Sample of paint shall be approved from EIC before delivering of material. 4) Test certificates of paints shall be provided along with paint.

Epoxy paint polyamide - APCODUR-CF 641