SPL REPAIRS TO TOILET BLOCKS P-144 A AND P-144 B AT INS BAAZ CAMPBELL BAY

Amount

Dismantling of existing old roof galvalume sheets, plain or corrugated of any thickness and gauge in sloping roof, valley and ridges all as directed.

Dismantling wrought iron or mild steel as in roof purlins etc of any description not otherwise provided for all as directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises all as specified and directed.

Dismantling of wall and ceiling boards( fibre,pulp,insulations etc) or insulation boards/slabs/blankets any thickness including cover fillets and framework of any description all as directed.

Demolition of Cement Concrete (unreinforced) in ground floors and paving not exc 15cm thickness (below or above ground level) including removal of debries to outside MD land and disposed off all as specified and directed.

Taking down Chowkhats or frames/shutters of any description not exc. 1.5 sq. m each all as specified and directed.

Taking down Chowkhats or frames/shutters any description n exc. 1.5 sq. m but n exc4 sqm each all as specified and directed.

M&L for Rolled mild steel sections conforming to Fe 410 -W (Gde E- 250) as in main and cross beams, hip and jack rafters; purlins wind ties where connected to common rafters fixed with angle cleats or other connecting plates all as specified and directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa (AZ-150) as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa (AZ-150) as in roof ridge and valley fixed with self tapping screws as specified and directed.

M&L for Rendering 10 mm thick internally in cement plaster 1:6 on fair faces of concrete surfaces finished even and smooth without using extra cement, incl taking down existing plaster including racking out joints all as specified and directed.

M&L for Nonskid coloured Ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15 mm thick screed bed in cement mortar 1:6 all as specified and directed.

M&L for Glazed ceramic coloured tiles in vertical surface 350x 250x 7 mm/ 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match laid over 10 mm thick rendering in cement mortar 1:4 all as specified and directed.

M&L for 75m mm thick plain cement concrete type C-1, 1:3:6 mix using 20mm graded stone aggregate as in plinth protection, pavings, path etc. surface finished even and smooth without using extra cement including making 6 mm wide grooves to full depth at 2 to 3 m interval and at every change of direction and filling the grooves with mixture of bitumen and sand mixed in the ration of 1:3 by weight complete as specified and directed.

S&F of 4 mm thick Designer Non asbestos fibre cement building boards fixed or laid/ inserted to Aluminium framework in ceilings including Anodised aluminium snap grid frame work of size 605 x 605mm for false ceiling and applying three coats of distemper over ceiling boards all as specified and directed.

M&L for Preparation of new or previously un treated surfaces of steel and iron surfaces of any description over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide, zinc chrome paint all as specified and directed.

M&L for preparation of newly plastered surfaces of walls and applying two coat of distemper oil emulsion white tinted over a coat of alkali resistant primer complete all as specified and directed.

M&L for preparation of old plastered surfaces of walls and applying one coat of cement base paint complete all as specified and directed.

M&L for anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleats for fixing etc., complete all as specified and directed.

S&F of Anodised aluminium door shutters, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, rubber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and directed.

S&F of Anodised aluminium window and ventilator shutters glazed and gauged, side/top hung type without sash bars for aluminium sections weighing not less than 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fittings such as peg stays, hinges, suitable handles etc., including taking down old aluminium window/ventilator complete all as specified and directed.

S&F of 4 mm thick Figured glass, pin head type sheet glass, ordinary quality and glazing fixed with aluminum windows all as specified and directed.

M&L for 12 mm thick Prelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminations fixed to aluminum doors / partitions all as specified and directed.

S&F of Stainless steel wire cloth. 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples all as specified and directed.

S&F of factory made PVC Solid Door frame of size 50mmx47mm made out of 5mm plain coloured PVC sheet reinforced with MS Square tube, fixed in opening as per specification and directed.

S&F of Factory made Solid panel PVC Door Shutter of 30mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail ; Panelling of plain clour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement as per specification and directed.

S&F of 100 mm long Aluminium butt hinges extruded aluminium alloy with galvanised steel wire pin anodised, type C-21 all as specified and directed.

S&F of 150 mm long Aluminium anodised barrel tower bolts of extruded aluminium section all as specified and directed.

S&F of 150 mm long Aluminium alloy handles cast type anodised all as specified and directed.

S&F in repair of Vitreous China wash down water closet pan, pedestal pattern EWC, white including 10 lit capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets including PVC seat cover , closed pattern with flat bottom, and cover and including hinges device all as specified and directed.

S &F in repairs Vitreous China urinal bowl type White colour of size 465x355x265 mm complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60 mm long brass screws, pointing around urinal back in cement including PVC waste pipe and waste coupling all as specified and directed.

S&F Vitreous china urinal partition white of size 310x700 mm ,Urinal partitions slabs terminating about 40cm above floor line, fixed in repairs all as specified and directed.

S&F in repair of Vitreous China wash basin, white, flat back, size 550x400mm excluding taps, waste chain and plug and porcelain stopper but including brackets and brass, chromium plated, waste fittings and waste pipe all as specified and directed.

S&F in repair of CP Pillar taps 15 mm bore, cast copper alloy, with capstan heads screwed down high pressure, with or without lettered `Hot' or `Cold' with long screwed shanks & fly-nuts, screwed for iron pipe all as specified and directed.

S&F in repair of PVC connections 15mm size with PTMT nuts of length 450mm all as specified and directed.

Supplying and laying of 25mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking down of existing plumbing lines complete all as specified and directed.

Supplying and laying of 20mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking down of existing plumbing lines complete all as specified and directed.

Supplying and laying of 32mm outer dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl taking down of existing plumbing lines complete all as specified and directed.

S&F in repair of Stop/angle concealed type valves 20 mm bore, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F in repair of angle cock/Stop valves concealed type15 mm bore, cast copper alloy screwed down high pressure, with crutch of butterfly handle, screwed both ends for iron pipe or for unions all as specified and directed.

S&F of 15mm bore Bib taps,concealed type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed in repair all as specified and directed.

M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement fixed in repair all as specified and directed.

S&F of 110 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls/floors in repair all as specified and directed.

S&F of 75 mm PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls in repair all as specified and directed.

S&F of 110 mm bore PVC (SWR) bends any radius fixed in repair all as specified and directed.

S&F of 110 mm bore PVC (SWR) junction single, (Single T) equal or unequal fitted with access door fixed in repair all as specified and directed.

S&F of 75 mm bore PVC (SWR) bends any radius fixed in repair all as specified and directed.

S&F of 100 mm dia PVC (SWR) vent cowl fixed in repair all as specified and directed.

S&F Chromium plated Health Faucet with tube and hook ABS faucet fixed in repair all as specified and directed

S&F Chromium plated shower roses with or without swivel joints, any size, including fixing to steel pipe or union and fixed in repair all as specified and directed.

S&F Semi circular 150mm dia PVC (SWR) pipesfor rain water gutters including necessary fixing arrangements with and including MS clamps for support etc all as specified and directed.

S&F of aluminium anodised tubular towel rail, 20mm dia, D type, 60cm long between flanges all as specified and directed.

Taking down old unserviceable point wiring, (light, fan, socket or power) complete including fittings & fixtures such as switch, ceiling rose, pendants, regulator, socket, etc., and making good the disturbed surface of wall, floors, ceiling etc to match with the existing including touch up of paint/white wash all as specified and directed by Engineer- in-charge.

Material and labour for point wiring with 1.5 sqmm PVC insulated,unsheathed FRLS multistrand copper conductor cable 1100 votls grade drawn into and including non metallic rigid PVC conduit medium grade not less than 20 mm dia ISI marked ivory colour/ Caping casing as per site requirement with all conduit fittings and fixing accessories including 2.0 mm thick MS sheet terminal boxes (2 Coats of black paint over one coat of red oxide) with 3.0 mm thick phenolic laminated sheet for mounting switches, sockets,fan regulators etc incl1.5Sqmm FRLS multistrand copper conductor cable as continuous earth wire complete for the following:- (a) One light point controlled by one switch.

(b) One exhuast fan point controlled by one switch.

(c) One socket 5 Amps on same board.

(d) One socket 5 Amps on independent board.

All as per item No. 55 on but with 2.5 Sqmm cable for 3 pin 15 Amps socket point controlled by one switch on independent board and 2.5 Sqmm copper conductor green in colour as earth continuity conductor complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Switch piano, flush type single pole, one way 5 Amp complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Switch socket combination 2 in 1, 5 Amps flush type complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Switch Socket combination 2 in 1, 3 pin, 5 and 15 Amp flush type universal complete all as specified and directed by Engineer-in-Charge.

Supply & Fix Ceiling rose PVC/ Polycarbonate insulated body with three terminals complete all as specified and directed by Engineer-in-Charge

S & F Surface mounting 10 Watt LED Luminaries with epoxy white powder coated CRCA sheet steel housing with reeded translucent acrylic diffuser and 1 x 10 Watt LED fitting including taking down old unserviceable fittings any type complete all as specified and as directed . Make :Bajaj, Phillips, Wipro

S & F Energy saving new generation 10 watts LED bulk head fitting IP 65 luminaire with opel diffuser pre wired and necessary mounting arrangements , provision of new 3 core multistranded copper conductor of size 23/0.193 from ceiling rose to fitting including LED bulb and removal old existing unsv tube light fitting complete all as specified and as directed. Make :- Bajaj, Philips, Wipro, Havells, Syska, Jaguar

Supply and fix surface mounting 20 W LED Tube light fitting nominal system lumen output of 2000 lumens and a minimum system efficacy of 100 lm/W. The luminaire shall have a rated system lifetime of 50,000 burning hours at L70.The luminaire should have a color temperature of 6500K and CRI>83. pre wired connection up to tube light fitting with connecting up with copper 2 core flexible cord of minimum size 1.0 Sqmm and white in colour.The luminaire shall meet IP20 rating with THD < 10% and PF > 0.95. The total power consumption should not exceed 20W (including driver) including taking down old unserviceable fittings any type including round block complete all as specified and as directed. Make :Bajaj, Phillips, Wipro

Supply&Fixing LED street light Luminaries compressing pressure, die cast housing for better aesthetics and thermal management. with LED’s & drive, heat resistant flat glass suitable gasketed for IP66 protection, high grade power coating and fitted with toughened glass with high power LED’s of 25 watt and pipe mounting arrangement for end mounting on bracket made out of 50mm dia GI pipe light grade, 1.2m long bent to shape with two sets of clamps made out of flat iron 50 x 6mm, bolts, nuts and washers and applying two coats of aluminium paint over on coat of red oxide zinc chrome primer connecting electrically with PVC mulitistranded copper cable of suitable size complete including taking down existing light fittings all as specified and directed Make: Bajaj, Havells, Phillps, Wipro

Material and labour for submain wiring with single core PVC insulated FRLS multistranded copper conductor cable of size 2x6.0 Sqmm drawing into and including rigid non metallic PVC conduit, medium grade not less than 20mm dia ISI marked ivory colour with all conduit fittings and fixing accessories and 6.0 Sqmm FRLS multistranded copper conductor cable as continuous earth wire incl taking out old wire completeas directed by Engr in Charge

Supply & Fixed In Repairs Sheet metal enclosure for DB’s Single pole and neutral, double door 240V, 8 way with 100 Amps rated bus bar including removal of old unserviceable one complete all as directed by Engr in Charge Make -Legrand/L&T/Havells

Supply & Fix MCB SP 6 to 32 Amps 10 KA. "C" Series Make -Legrand/L&T/Havells

Supply & Fix MCB DP 32 Amps 10 KA. "C" Series Make -Legrand/L&T/Havells

Supply & Fix Exhuast fan AC single phase heavy duty 230 V / 240 V of size 300 mm sweep with louvers & MS clamps, rubber pads complete all as directed & specified Make:- Bajaj/Cromton/ Usha/ orient or Equivalent

Govinda Swamy Construction

USR Transport

MAHESWARI CONSTRUCTIONS

M/s Gurunath Construction

M/S Sudhir Kumar Gupta