REPAIR TO DOORS, CUPBOARD SHUTTER, SUNKEN FLOORS, SANITARY FITTINGS, FLOOR TILES, ROOF SHEETS AND MISC WORKS AT GTOC, DCA AND VLO AREA UNDER AGE B/R (SOUTH) OF GE (SOUTH) BANGALORE

M&L for Non-skid coloured ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile not exceeding 0.11 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 after dimantiling of old existing floor tiles incl. removal of dabris outside of MOD land etc complete all as specified and directed.

S&F Coloured glazed ceramic tile in vertical surface 300x450x7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match over and including 10 mm thick rendering CM 1:4 backing coat after dismantling of wall tiles/Terrrazzo/Stone Slabs/ or any type of materials in dado including cement mortar bedding (but not backing) and removing upto Brick wall surface and removal of rubibish out side the MD land complete all as specified and as directed.

M&L ultra charged vitrified ceramic tiles 8 to 9 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over a screed of 15mm thick in CM 1:6 etc after dismantling of old existing floor tiles of size upto 0.36 Sqm cut from same shade of complete all as specified and as directed..complete all as specified and as directed..

M&L ultra charged vitrified ceramic tiles 8 to 9 mm thick of 600mm x 100mm size cut from 600 x 600mm, in skirting etc. set and jointed in neat cement slurry and pointed in white cement or coloured cement to match over 10 mm thick rendering in cement mortar 1:4 etc after dismantling of old existing floor tiles complete all as specified and as directed.. Note : The width of tiles 100 mm to be cut from full size of tiles as directed by Engineer-in-charge.

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including ridge fixed with J- hook bolt and nut complete all as specified and as directed.

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F pre-painted galvalume aluminium zinc coating GI based plain sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified.

S&F rectangular/Square hollow mild steel section as in purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc

Taking down steel windows and ventilators of area below 0.5 sqm each incl all fittings including and fixtures and removed from site and and disposed off outside MD land complete all as specified and directed.

Taking down steel windows glazed and gauged with guard bars exc 0.5 sqm and not exc 1 sqm each and inl all fittings and fixtures and removed from site and and disposed off outside MD land complete all as specified and directed.