Painting of pipe rack structures behind 515,505 buildings and other areas of KARP and KARP- II, internal and external walls, floor painting including radioactive restricted areas in CWMF complex building.

Amount

Providing and painting with Epoxy paint (two or more coats ) using APCODUR-CF-641 finishing coat at all locations prepared and applied as per manufacturer specifications including a priming coat if specified by the manufacturer, preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficient water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any etc. complete all as per manufacturers technical Data and as directed at site to achieve 200micron Dry film thickness (50 Micron primer coat and 150 Micron finishing Coat).(Contractor has to provide Elcometer sampling sheets etc. at his cost for testing film thickness).

Providing and painting with epoxy paint (two or more coats) using APCODUR-CF-641 finishing coat at all locations prepared and applied as per manufacturer specifications including a priming coat if specified by the manufacturer, preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficient water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any, et. complete all as per manufacturers Technical Data and as directed at site to achieve 150micron Dry film thickness (50Micron primer coat and 100micron finishing coat). Note:1) 'AMERLOCK 400' Epoxy with 'AMERCOAT 65' Epoxy thinner manufactured by Goodlass Nerolac or 'EPIGIARD TL HIGH BUILD 533 FINISH. Epoxy paint over 'EPIGUARD HP OFF WHITE PRIMER' of 'SHALIMAR PAINTS' make or M/S Asian paints 2) Sample work to be executed and got approved by the engineer in chage before bulk procurement. 3) Sufficient ventilation arrangements to be made in the working area at the coast of contractor. 4) Sufficient lighting / ladders to be provided by the contractor. 5) Equipment/ machinery in the working area to be covered with tarpaulins by the contractor. 6) Sufficient care to be taken while erecting and dismantling of scaffolding/ ladder from damaging / injuring flooring/ wall surfaces. All damages need to be rectified at the contractors cost. 7) Approved type / make of Air Compressor and airless spray gun with tip to be brought by the contractor. 8) Protection wears as per safety code norms are to be provided by the contractor. 9) Paint testing equipments such as 'Ford Cup' 'Elco meter' and wet film gauge are to be arranged by the contractor. 10) Safety qualified supervisor and technical supervisor each 1 No. to be present at site till the completion of the work. (In-Active area)

Providing and painting with epoxy paint (two or more coats) using APCODUR-CF-641 finishing coat at all locations prepared and applied as per manufacturer specifications including a priming coat if specified by the manufacturer, preparation of surface and etching with 10% commercial Hydrochloric acid wherever necessary and neutralizing the acid etched areas by washing with 5% solution of soda ash neatly and washing with sufficient water, after first coat Epoxy based trowelling compound if required, including preparation of the surface by scrapping, applying sand paper, filling the holes, joints, cracks if any, et. complete all as per manufacturers Technical Data and as directed at site to achieve 150micron Dry film thickness (50Micron primer coat and 100micron finishing coat). Note:1) 'AMERLOCK 400' Epoxy with 'AMERCOAT 65' Epoxy thinner manufactured by Goodlass Nerolac or 'EPIGIARD TL HIGH BUILD 533 FINISH. Epoxy paint over 'EPIGUARD HP OFF WHITE PRIMER' of 'SHALIMAR PAINTS' make or M/S Asian paints 2) Sample work to be executed and got approved by the engineer in chage before bulk procurement. 3) Sufficient ventilation arrangements to be made in the working area at the coast of contractor. 4) Sufficient lighting / ladders to be provided by the contractor. 5) Equipment/ machinery in the working area to be covered with tarpaulins by the contractor. 6) Sufficient care to be taken while erecting and dismantling of scaffolding/ ladder from damaging / injuring flooring/ wall surfaces. All damages need to be rectified at the contractors cost. 7) Approved type / make of Air Compressor and airless spray gun with tip to be brought by the contractor. 8) Protection wears as per safety code norms are to be provided by the contractor. 9) Paint testing equipments such as 'Ford Cup' 'Elco meter' and wet film gauge are to be arranged by the contractor. 10) Safety qualified supervisor and technical supervisor each 1 No. to be present at site till the completion of the work. (Active area)

Supply of Hi gloss first quality Synthetic enamel paint of ASIAN/NEROLAC/Shalimar /Berger/STP/STANVAC make, supply & erection of scaffolding, ladder, etc.,, if required, surface preparation,removal of old loose paints, localised application of metal putty & primer on the corroded portion if required & application of paint as specified by the paint manufacture on 2 T GANTRY Crane ( RCC trench - radioactive area) in complete aspects including all stenciling & marking as per the attached technical specifications.The DFT shall be minimum of 150microns of appoved colour paint. Approximate area of the crane is 310 Sq.meters

Providing and painting with heat resistant aluminium paint to withstand minumum 200° C temperature of ASIAN/NEROLAC/STP/STANVAC make , supply & erection of scaffolding, ladder, use of safety belt, etc.,, if required, surface preparation,removal of old loose paints, localised application of metal putty & primer on the corroded portion if required & application of paint as specified by the paint manufacture on incinerator chimney (25m hight-radioactive area) in complete aspects including all stenciling & marking as per the attached technical specifications.The DFT shall be minimum of 100microns with two coats of paint.Total surface area of chimney with accessories to be painted is 68.261 Sq.m

Providing and applying painting Two coats at all levels with premium plastic emulsion paint of (Asian or Equivalent approved brand, colour and manufacturer) to give an even shade including preparation of the surfaces, applying putty, scaffolding complete all as per specification and as directed by the Engineer-in-charge. (In-Active area)

Supply and application of Aluminum paint over metallic structures confirming to IS No. 2339-1963 and approved or equivalent make of Asian Paint/ Nerolac /Berger/Shalimar including preparation of surface as per specification at all lift ,scaffolding complete all as per specifications and as directed by the Engineer- in- charge.(In-Active area)

Supply and application of Aluminum paint over metallic structures confirming to IS No. 2339-1963 and approved or equivalent make of Asian Paint/ Nerolac /Berger/Shalimar including preparation of surface as per specification at all lift ,scaffolding complete all as per specifications and as directed by the Engineer- in- charge.(Active area)

Providing and applying painting Two coats on rough cast plaster work at all levels with Acrylic emulsion paint of Apex or Equivalent approved brand, colour and manufacturer) to give an even shade including preparation of surface as per specification at all lift ,scaffolding complete all as per specifications and as directed by the Engineer- in- charge.(In-Active area)

Supply and application of internal surfaces with two coats of Synthetic Enamel paint of approved colour and make of Asian Paint/ Nerolac /Berger/Shalimar including Supply and erection of scaffolding, preparation of surface, applying putty as per specification at all lifts.In Normal area

Supply and application of internal surfaces with two coats of Synthetic Enamel paint of approved colour and make of Asian Paint/ Nerolac /Berger/Shalimar including Supply and erection of scaffolding, preparation of surface, applying putty as per specification at all lifts. In Restricted area

Painting and stencilling of letters on cell wall, tank and equipments including supply of all consumables. The work involves surface cleaning, application of 2coat of yellow paint background & boarder with black paint, cutting of letter stencils & fixing of stencils over the yellow paint and applying black paint over the stencil.

Stencilling of letters on the building walls including marking the area, computer designing of stencil, fixing the stencil paper and applying black paint over the stencil.

Providing and fixing double Tubular scaffolding system using H-Frames / APS system of (cup lock type) on the exterior side upto seven story height made with 40mm dia. M.S tube 1.5m centre to centre horizontal and vertical tubes joining with cup and lock system with M.S tubes, M.S tube challies, M.S clamps and M.S staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners connection with building etc. wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and as approved by the Engineer-in-Charge. The elevation area of the scaffolding shall be measured for payment purposes. The payment shall be made once irrespective of duration of scaffolding.

G.KAMLAKAR (BID ID -3202533)

E.KRISHNAN (BID ID -3202528)