KMC/NBG/LTG/CRM/e-15/25-26

TOTAL

Item Rate BoQ

BoQ_Ver3.0

Name of the Bidder/ Bidding Firm / Company :

PRICE SCHEDULE (This BOQ template must not be modified/replaced by the bidder and the same should be uploaded after filling the relevent columns, else the bidder is liable to be rejected for this tender. Bidders are allowed to enter the Bidder Name and Values only )

NUMBER #

UDMA.ELECTRIC-MECH.WOR K(VOL-1) OCT18 42-E/19 DOUBLE BALL BEARING FOR SN-E SHAFT OF I.D FAN (12000CU.M/HR): Supply and fixing of the Roller bearing in the shaft of blower (SKF make 22312E/C3)

UDMA.ELECTRIC-MECH.WOR K(VOL-1) OCT18 42-E/20/a PALMER BLOCK: a) Supply, fitting and fixing C.I palmer block for suitable to EN-24, 60 mm dia shaft including proper alignment and fixing in the pedestrian of the blower for free run of impeller.

UDMA.ELECTRIC-MECH.WOR K(VOL-1) OCT1842-E/21/a.. .V... GROOVED PULLY (C.I): Supply and fixing the 3way C.I ...V... grooved pulley with complete mechanism key way suitable to EN-24, 50 mm dia of shaft end. a) blower driving (375 mm dia)

UDMA.ELECTR IC-MECH.WOR K(VOL-1) OCT1842-E/22 IMPELLER (12000 CU M /HR CAPACITY): Manufacture, Supply,Fitting and fixing S.S.-304 grade impeller of 635 mm dia. X 110 mm width in overall dimension. Welded with 12 nos. skewed fins/blade (size: 175mm x 100mm x 4mm thickness) at 30... Angle on the impeller centre point with Back plate and Front plate. Size of Back plate and front plate is (635mm dia. x 6mm thickness) respectively . After Fitting, Fixing of shaft with impeller dynamically balance for smooth air discharge capacity 12000 cu. m. /hr.

UDMA.ELECTR IC-MECH.WOR K(VOL-1) OCT18 42-E/23/a EN-24 SHAFT OF IMPELLER (60 MM DIA, 1000 MM LONG): a)Supply and fixing with EN-24 shaft of 60 mm dia x 1000mm long complete machining in true length, both side steps down 50mm dia x 150mm long or 100mm long for impeller side and pully side respectively incl. key slot on both ends having dimension 150mm x 10mm x 5mm for impeller sideand 100mm x 10mm x5mm for pully side on both ends of shaft is grilled and tapped 12mm dia. for lock washer to fitted of 100mm dia. and 8mm thickness and centrally drilled for 14mm dia.

UDMA.ELECTRIC-MECH.WOR K(VOL-1)OCT18 44-E/46 Supply and fixing the tough ...V... belts of sizes(ECODRIVE make)-B98

UDMA.ELECTRIC-MECH.WOR K(VOL-1) OCT1845-E/49 Dismantling the 12000 cu M/hr I.D. Fan/blower of 12000 cu M /hr capacity from its foundation by opening the foundation bolts/driving bolts and flexible compiling of inlet, outlet canvas duct for repairing purpose.

UDMA.ELECTRIC-MECH.WOR K(VOL-1) OCT1845-E/50 Re fixing /mounting the 12000 cu M/ hr I.D fan /blower over its foundation by Means of nuts, bolts, washers connecting the inlet and outlet canvas cloth duct & wearing the ...V... belt complete alignment in respect to driving motor of 25H.P squirrel cage motor

UDMA.ELECTRIC-MECH.WOR K(VOL-1) OCT18 15-A/15(c) supply&delivery of the following 50Hz,AC,Direct on line starter of continuous duty in sheet steel enclosure(mak L&T/ABB/SCHNEIDER)- 10HP three phase(Max. Relay range 15-25 amp)

PWD.SANITAR Y AND PLUMBING2017 2-A.(A)-(II) 1. A. (i)(i) PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 1. Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. Payment for painting will be made seperately) (A) For Exposed Work (f) (ii) 100 mm dia. medium quality

UDMA.ELECTRIC-MECH.WOR K(VOL-1) OCT1815-A/14(b) supply&delivery of the following 50Hz,AC,fully automatic star Delta starter of continuous duty in sheet steel enclosure(mak L&T/ABB/SCHNEIDER)- 25HP three phase(Max. Relay range 13-21 amp)

PWD.SANITARY AND PLUMBING 2017 4-4.(ii)PLUMBING WORKS (A)-(II) G.I. PIPE WORKS AND FITTINGS 4. Supplying, fitting and fixing Peet's valve fullway gunmetal standard pattern best quality of approved brand bearing I.S.I. marking with fittings (tested to 21 kg per sq. cm.). (iv) 80 mm dia

UDMA.ELECTRIC-MECH.WOR K(VOL-1) OCT18 45-E/27 Manufacture, supply and erection of M.S chassis made from 150mm x 75mm x 8 mm channel as per dimension of I.D fan and motor sets complete fabrication, welding ,grinding drill holes for fixing motor blower set as per direction of Engineer-In-Charge

PWD.BLDG SCHEDULE_W EF 1.11.2017279-1 (T) - B -12 BUILDING WORKS. (T)MISCELLANEOUS WORKS: B. MAINTENANCE WORKS : 12)Cleaning and removing conservancy garbage mixed with rubbish & other filthy materials from the road side flank, drain and compound including cutting, loading, unloading to and from truck or cart by Mathor labour & removing the same to any distance.

PWD.BLDG SCHEDULE_W EF 01.11.201799-1(F) A. 1 (I) BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS,GATES ETC. A. ORIGINAL WORKS 1. M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another with bracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming to IS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire chargeof all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc. Payment to be made on the basis of calculated weight of structural members only in finished work as per IS specified weight. Payment for gusset, bracket, cleat, rivets, bolts and nuts may be make by adding the actual weight of such items with the weight of finished structural members or 7% of weight for finished structural members weighing not less than 22.5 Kg. / m. or 15 % of weight for finished structal members weighing less than 22.5 Kg. / m. may be increased allow for bracket, cleat, rivet, bolts and nuts etc. and no seperate payment being made for these items, as per direction of Engineer In Charge. The rates are considered for a height of erection 8m. / 2nd floor level from the ground. Add 1.5% extra over the rate for each additional floor or 4m. beyond initiial 8m. or part thereof. I) For structural members of specified sections weighing less than 22.5 Kg./m

PWD.BLDGSCHEDULE_W EF 01.11.201710-1(B).3(a) BUILDING WORKS (B) DISMANTLING, CUTTING CHASE, HOLESETC 3. Dismantling R.C. floor, roof, beams etc including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars.(a) In ground floor including roof.

PWD.BLDG SCHEDULE_W EF 01.11.201744-1(C). B.40(a)(i)(I) BUILDING WORKS ( C ) Brickworks,Concrete Works etc.40..Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation and upto roof of ground floor/upto 4 m.(i) Tor steel/Mild Steel.I. SAIL/ TATA/RINL.

PWD.BLDGSCHEDULE_W EF 01.11.2017 26-1(C).B 10(i) BUILDING WORKS ( C ) Brickworks,Concrete Works etc 10?.Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(i) Pakur Variety

PWD.BLDG SCHEDULE 2017/Page-40/Item-4(B) Single brick flat soiling of picked jhama bricks including ramming, dressing to bed to proper level and filling joints with local sand

PWD.BLDG SCHEDULE 2017/Page-40/Item-4(B) Filling in foundation or plinth by fine sand in layer not exceeding 150m as directed and consolidated the same by through saturation with water ramming complete including cost of supply of sand

PWD.BLDGSCHEDULE_WEF 01.11.2017 102-1(F) A. 6 (i)b BUILDING WORKS (F) STRUCTURAL STEEL WORKS, GRILLS, GATES ETC. A. ORIGINAL WORKS 6. Holding down bolt with nut including 100 x 100 x 6 mm plate washer at bottom fitted complete and packing the hole with cement concrete or cement grout as directed. (i) 16 mm dia bolt (b) 450 mm long

UDMA.ELECTRIC-MECH.WOR K(VOL-1) OCT18 page-18/sl-27(a) PALMER BLOCK: a) Supply, fitting and fixing C.I 'V' grooved pulley with complete mechanism key way suitable to EN-24,60mm dia of shaft end. a) Motor Driving

Supply and Fixing of SP3L+ Shaft Sleeve(SS)incl. all necessary accessories complete in all respect

Supply and Fixing of SP3L+ Impeller (Cast Iron)incl. all necessary accessories complete in all respect

Supply and Fixing of SP3L+ shaft (Mild Steel)incl. all necessary accessories complete in all respect

Supply and Fixing of SP3L+ Bearing Housing incl. all necessary accessories complete in all respect

Rewinding of 10HP squirrel cage motor of Self-priming slurry water pump incl. heat varnishing complete in all respect.

Supplyof totally Enclosed Fan coolwed squirrel cage induction motor - 4 pole, 1500 rpm, 18.5 KW/25HP suitable for 415V+/- 10% v,3 phase, 50hz+/-5% AC supply with ambient 50 deg. Celcius , class F insulation (L&T/ABB/Crompton greeves Make)

Rewinding of 25HP squirrel cage motor of Blower incl. heat varnishing complete in all respect.