C/o Jal Bhandaran structure

Amount

Cutting in earth work in all kinds of soil such as pick work, jumper work, blasting work and chiselling work etc. and disposal of excavated earth as directed within all leads and lifts.

Excavation in foundation, trenches,etc. in earth work in all kinds of soil such as pick work,jumper work,blasting work, hard blasting and chiselling etc. stacking the excavated soil not more than 3 mtrs. clear from the edge of excavation and then returning the stacked soil in 15cm.layers when required into plinths sides of foundations etc. consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed within all leads and lifts.

Prov. and laying cement concrete 1:6:12(1cement: 6sand: 12 graded stone agg. 40mm nominal size) and curing complete excluding cost centring and shuttering in:-a) Foundation (Head Weir)

Prov. and laying cement concrete work 1:5:10(1cement:5sand:10graded stone agg. 40mm nominal size) with 15% plum and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :-a) Foundation and plinth.

Providing and laying cement concrete 1:1.5:3 ( 1 cement : 15sand : 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work & reinforcement for reinforced concrete work in:- (Mix design)M-30. Foundation and Plinth

Walls (any thickness but not less than 0.1 m thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level.

Insuspended floors roofs etc

Providing form work with steel plates 3.15mm thick welded with angle iron in frame 30x30x5mm so as to give a fair finish including centring, shuttering, strutting , strutting and propping etc. with wooden, battens, and ballies, height of propping and centring below supporting floor to ceiling not exceeding 4 mtrs.and removal of the same for insitu reinforced concrete and plain concrete work in:-a)Vertical surfaces such as walls any thickness) partitions and the like including attached pillasters,buttresses, plinth and string courses and the like.

Providing mild steel/tor Steel reinforcement for R.C.C work including bending , binding and placing in position complete up to floor two level. @ 90 kg/cum

1.80metre high fencing (as per approved design) 2.50metre RCC Posts 3.00 metres centre to centre and RCC struts with 9 horizental lines and 2 diagonals of galvanised steel bar bed wire (IS:278-1962 Type1) weighting 9.38Kg.per 100 metres (minimum) strained and fixed to posts by typing to 6mm galvanised steel bar niles/clips with G.I. binding wire (cost of R.C.C struts and straining bolts shall be paid for seperately).

Providing and laying in trenches galvanised mild steel tubes (M) tube fittings(earth work in trenches to be measured and paid separately. 150 mm dia (M)

Providing and fixing double flanged 150mm dia Cast steel Sluice valve ( Leader make) as per ISI mark (ASA-150) complete in all respect as per direction of Engineer in charge.

RAJEEV SHARMA

Parmod Kumar Thakur

CHAMEL SINGH

Rajesh Thakur

BHUSHAN THAKUR