AGE I CGN 30 20 21 REPAIR MAINT REPLACEMENT OF EXTERNAL WATER SUPPLY PIPE LINE AND FITTINGS AT SEC 62 SEC 52 SEC 24 AND SEC 23 UNDER AGE I CG NOIDA

Amount

Excavation in trenches not exceeding 1.5 mtr wide and not exceeding 1.5 m in depth and getting out in soft/loose soil for laying of pipe , all complete as specified and directed.

Returning filling in trenches including spreading, leveling, watering and well ramming in layers not exceeding 25 cm thick in soft/loose soil compete all as specified and directed.

Removal of excavated surplus soil to a distance not exceeding 50 mtr and depositing where directed at level not exceeding 1.5 mtr above the starting point all as directed by Engineer-in-Charge.

Taking up or down galvanised water tubing (medium grade) with all fitting from trenches/ walls/ floors/ ceilings and separating serviceable pipes and fittings for reuse in the work and removing unserviceable pipes and fittings from site of 20 mm bore tubing including removing rusted MS clamps from walls etc.(where necessary),complete all as specified and directed.

All as per item No 4.00 here-in-before but 25 mm bore tubing.

All as per item No 4.00 here-in-before but 40 mm bore tubing.

All as per item No 4.00 here-in-before but 50 mm bore tubing.

All as per item No 4.00 here-in-before but 65 mm bore tubing.

Taking up or down galvanised water tubing (medium grade) with all fitting from trenches/ walls/ floors/ ceilings and separating serviceable pipes and fittings of dia 80 mm bore tubing.

All as per item No 9.00 here-in-before but 100 mm bore tubing.

Supply and lay galvanised steel water tubing (medium grade) complete with all fittings, laid in trenches, including testing for 20 mm bore tubing, complete all as specified and directed. Make :- TATA/JINDAL/PRAKASH/ZENITH

All as per item No 11 here-in-before, but 25 mm bore tubing.

All as per item No 11 here-in-before, but 40 mm bore tubing.

All as per item No 11.00 here-in-before, but 50 mm bore tubing.

All as per item No 11.00 here-in-before, but 80 mm bore tubing.

All as per item No 11.00 here-in-before, but 100 mm bore tubing.

Supply and lay galvanised steel water tubing (medium grade) complete with all fittings, fixed to wall and ceiling or laid in floors, including testing for 15mm bore tubing, including replace the rusted MS clamps on walls/ ceilings etc. complete all as specified and as directed. Make : TATA/JINDAL/PRAKASH/ZENITH

All as per item No 17.00 here-in-before, but 20mm bore tubing.

All as per item No 17.00 here-in-before, but 25mm bore tubing.

All as per item No 17 here-in-before, but 40 mm bore tubing.

All as per item No 17.00 here-in-before, but 50mm bore tubing.

All as per item No 17.00 here-in-before, but 65 mm bore tubing.

All as per item No 17.00 here-in-before, but 80mm bore tubing.

Fixing only after cleaning steel water tubing (galvanized) and connections with new GI fittings fixed to wall ceiling or laid in floor after cleaning, washing or removing old screw thread as required and providing new fittings wherever required for 15mm bore tubing, complete all as specified and directed.

All as per item No 24.00 here-in-before, but 20mm bore tubing.

All as per item No 24.00 here-in-before, but 25mm bore tubing.

S & F in repair/replacement ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe & fixed, of dia 25 mm (min wt. 455 gms), complete all as specified and directed.

S & F in repair/replacement ball valve high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe & fixed, of dia 20 mm (min wt. -210 gms), complete all as specified and directed

M&L for cutting existing steel tubing for alterations or additions (Each cut measured) for 15mm bore tubing, complete all as specified and directed.

All as per item No 29.00 here-in-before, but 20mm bore tubing.

All as per item No 29.00 here-in-before, but 25mm bore tubing.

All as per item No 29.00 here-in-before, but 40mm bore tubing.

All as per item No 29.00 here-in-before, but 50mm bore tubing.

Screwing existing steel tubing for alterations or additions (or lengthening screw on pipe to form connector) for 15mm bore tubing, complete all as specified and directed.

All as per item No 34.00 here-in-before, but 20mm bore tubing.

All as per item No 34.00 here-in-before, but 25mm bore tubing.

All as per item No 34.00 here-in-before, but 40mm bore tubing.

All as per item No 34.00 here-in-before, but 50mm bore tubing.

Dismantling of old unserviceable water tanks of capacity exceeding 250 ltrs and not exceeding 500 ltrs and removing from site, and deposited to store ,complete all as specified and directed.

Dismantling of old unserviceable water tanks of capacity exceeding 500 ltrs and not exceeding 1000 ltrs and removing from site,and deposited to store , complete all as specified and directed.

Supply, hoisting and fixing of multilayer, rotational moulded polyethylene water storage tank of capacity 500 ltrs (cylindrical vertical with closed top) in existing position including necessary connections of pipes, complete all as specified in SSR Part-I and as directed. Make: SINTEX/POLYCON/ROTAX.

All as per item No 41.00 here-in-before, but of 1000 ltr capacity.

S & F in repairs framed brackets of angles ,MS plain sheet fabricated from structural steel sections conforming to Fe-290 (Gde-E-165), cut to shape , drilled, including bending and welding in any shape or size as indicated including painting two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, complete all as specified and directed

M & L for PCC 1:3:6 type C2 (using 40 mm graded crushed stone aggregate) as in base foundation of pillar etc, complete all, as specified and directed.

M & L for rendering 10 mm thick in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed.

Cleaning and removing all scales and dirt etc. from tanks of capacity exc. 1000 litre and n.exc 2000 litre and also from mouth of circulating pipes, etc. complete all as specified and as directed.

Cleaning and removing all scales and dirt etc. from tanks of capacity exc. 500 litre and n.exc 1000 litre and also from mouth of circulating pipes, etc. complete all as specified and as directed.

S&F in repairs sluice valve of type PN-1.6 and size 80mm dia with gun metal raising spindle, both ends flanged, with iron wheel head conforming to IS-14846-2000, and drilled with necessary holes for bolts including jointing material viz nuts, bolts, rubber gaskets etc , complete all as specified and directed. Make : Kirloskar/ Venus/ RMCO/ Leader/HAZRA & other ISI Marked

All as per item No 48.00 here-in-before, but 100 mm dia tubing.

All as per item No 48.00 here-in-before, but 150 mm dia tubing.

S & F in repair Non return valves with screwed both ends for Galvanised iron pipe and fixed for 80 mm dia, complete all as specified and directed. Make : SCUD/SHAKTI/LEADER/ZOLOTO Note: The quoted rate is deemed to be inclusive of cutting, threading, insertion of union joint, nipple etc for the required size of pipe.

S & F in repair Stop valves, cast copper alloy, screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixing 20mm dia, complete all as specified and directed. Make : SCUD/SHAKTI/LEADER/ZOLOTO Note: The quoted rate is deemed to be inclusive of cutting, threading, insertion of union joint, nipple etc for the required size of pipe.

All as per item No 52 here-in-before, but 25mm bore tubing.

All as per item No 52 here-in-before, but 40mm bore tubing.

All as per item No 52 here-in-before, but 50mm bore tubing.

Suffly and fixing butter fly Valve Lever oprated CI 65 m bore tubing.

M & L for construction of brick masonry valve pit with sub-class 'B' brick built in cement mortar (1:6), of size (100 x 100 x 100) cm (internal dimension) with one brick walling and 150 cm x 150 cm x 10 cm base foundation with PCC (1:3:6), type C2 with cement plastering 10 mm thick with cement mortar (1:4) on internal & exposed surfaces, including MS cover of size 01 mtr x 01 mtr made out from 3 mm thick MS sheet including (40 x 40 x 5) mm angle iron framing on MS cover as well as on top wall of the valve pit & painting of the steel surfaces with two coats of synthetic enamel paint (first quality) over a coat of red oxide primer, including necessary earth work and demolition of the existing old valve pit, complete all as specified and as directed.

All as per Item No 57 but here in before size90X90x90 CM

All as per Item No 57 but here in before size 60X60x60 CM

S & Fin repairs GI flange (02 Nos) , jointing with 04 Nos nuts, bolts washer, rubber or leather gasket including screwing and fixing for 80mm bore, etc, complete all as specified and directed.

All as per item No 60.00 here-in-before, but 100 bore tubing.

S & F in repair gate valves (Gun metal globe valve) with iron wheel head, screwed both ends for iron pipe and fixed for 15 mm dia, complete all as specified and directed. Make : SCUD/SHAKTI/LEADER/ZOLOTO Note: The quoted rate is deemed to be inclusive of cutting, threading, insertion of union joint, nipple etc for the required size of pipe.

All as per item No 62 here-in-before, but 20mm bore tubing.

All as per item No 62 here-in-before, but 25mm bore tubing.

All as per item No 62 here-in-before, but 40mm bore tubing.

Labour only for Relaying/ re-routing of pipe line at wall/ Roof by moving it 1 Metre left / right at (G+3) Bldg at officer Md Accn sec -52 by providing Necessary GI fittings, elbow, nipple, union , rethreading short pieace if required complete all as directed by Engr in Charge.

Taking up or down galvanised water tubing (medium grade) with all fitting from trenches/ walls/ floors/ ceilings and separating serviceable pipes and fittings for reuse in the work and removing unserviceable pipes and fittings from site of 15 mm bore tubing including removing rusted MS clamps from walls etc.(where necessary),complete all as specified and directed.

PRASAD ELECTRICALS