REPAIR / REPLACEMENT OF ELECTRIC WIRING, LIGHT FITTINGS AND ELECTRIC FANS IN DOMESTIC AREA AT AF STN ADAMPUR

Amount

Point wiring with multi-stranded copper conductor, single core, PVC insulated and unsheathed FRLSH cable, including PVC insulated unsheathed stranded copper conductor single core FRLSH cable as earth continuity conductor to common earth and connected to earth dolly, with and including GI terminal boxes with 3 mm thick plastic laminated sheet cover having necessary cutting for fixing switches/ sockets comprising the following: -

One light point controlled by one switch or one fan point controlled by one switch & fan regulator etc. or for bell/buzzer with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One Socket outlet, 6 Amp, on the same board, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, all as specified.

One Socket outlet, 6 Amp, independent, with 1.5 Sq. mm (nominal area) cable & 1.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC heavy duty concealed conduit all as specified.

One socket outlet, 6/16 Amp, independent, with 2.5 Sq. mm (nominal area) cable & 2.5 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

One socket outlet, 6/16 Amp, independent, with 4 Sq. mm (nominal area) cable & 4 Sq. mm (nominal area) cable as earth continuity conductor, in and including rigid non metallic PVC medium duty concealed conduit all as specified.

NOTES: (a) Switch(es) & socket(s) shall be measured & paid for separately under respective item of Schedule 'A'. (b) GI boxes shall be fixed flush to walls in position with cement mortar (1:4) complete all as directed. (c) Conduit shall be laid on surface in case of RCC ceiling surfaces.

Switch piano flush button single pole one way, 6 Amp complete all as specified.

Switch piano, bell/buzzer push, flush button single pole one way, 6 Amp complete all as specified.

Switch piano flush button single pole one way, 16 Amp complete all as specified.

Socket outlet multipurpose having provision for 2&3 pin, 6 Amp, flush type, complete all as specified.

Socket outlet multipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp, flush type complete, all as specified.

Ceiling rose, surface bakelite, 65 x 50mm, three terminals complete, all as specified.

Lamp (angle) holder, insulated body, cord grip pattern, complete, all as specified.

Electric buzzer AC 230 volt, single pole, Ding Dong type complete, all as specified.

Fan regulator (electronic) suitable for 48”/56” sweep fan, step type, single phase, complete all as specified.

Switch modular type single pole one way, 6 Amp, IN REPLACEMENT, complete all as specified.

Bell push switch modular type single pole one way, 6 Amp, IN REPLACEMENT, complete all as specified.

Switch modular type single pole one way, 16 Amp, IN REPLACEMENT, complete all as specified.

Socket outlet modular type multipurpose having provision for 2&3 pin, 6 Amp, IN REPLACEMENT, complete all as specified.

Socket outlet modular type multipurpose having provision for two-in-one 3 pin 6 Amp & 3 pin 16 Amp, IN REPLACEMENT, complete all as specified.

Fan regulator modular type (electronic) suitable for 48”/56” sweep fan, step type, two module, IN REPLACEMENT, complete all as specified.

MAKE FOR SERIAL ITEM 12 TO 17: HAVELLS, LEGRAND or equivalent compatible make mentioned in Appendix 'B'.

Sub main wiring (with approved colour coding as per IS) with single core FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade (main cable: number of runs as indicated below along with single core FRLSH PVC insulated flexible stranded copper conductor 1.1 KV grade for earthing in conduits, complete all as specified for the following: -

2 runs of 2.5 Sq. mm main cable + 1 run of 2.5 Sq. mm earth cable

2 runs of 4 Sq. mm main cable + 1 run of 4 Sq. mm earth cable

2 runs of 6 Sq. mm main cable + 1 run of 6 Sq. mm earth cable

NOTES: (i) Conduit & conduit accessories shall be measured & paid for separately. (ii) For payment purposes, total runs of main cable (each run of one running metre) as mentioned above and one run (one running metre) of earth cable shall be considered together as "1 RUNNING METRE"

Rigid non metallic, PVC concealed conduit, 20 mm bore, medium grade, ISI marked, inclusive of all fitings (such as junction boxes, bends, elbows, tees, reducers, bell mouth tube ends) and all fixing acessories such as couplers, lock nuts, saddles, pipe hook etc. for sub main wiring and the like complete all as specified.

Sheet metal enclosure for DB for fixing MCB’s, isolators etc., having IP-43 protection, suitable for surface and flush mounting, complete all as specified comprising the following: -

SPN, 2 way with 200 Amp rated bus bar, 240 V, single door type

SPN, 4 way with 200 Amp rated bus bar, 240 V, double door type.

SPN, 8 way with 200 Amp rated bus bar, 240 V, double door type.

SPN, 12 way with 200 Amp rated bus bar, 240 V, double door type.

TPN, 4 way with 200 Amp rated bus bar, 415 V, double door type.

TPN, 4 way with 200 Amp rated bus bar, 415 V, double door type having housing and including MCCB 4 pole 63 Amp, 16kA.

MCB suitable for 240 volt AC supply, SP with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 6 to 32 Amp, IN REPLACEMENT complete all as specified.

MCB suitable for 240 volt AC supply, SPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 40 Amp, IN REPLACEMENT complete all as specified.

MCB suitable for 415 volt AC supply, TPN with over load and short circuit protection and rupturing capacity not less than 10 kA, 'C' curve type of rating 63 Amp, IN REPLACEMENT complete all as specified.

Blanking plate to cover unused space in DB's complete all as specified..

Single pole and neutral enclosure with a two pin and earth plug and socket complete with one single pole MCB 20 Amp, 240 volt, breaking capacity not less than 10 kA, complete all as specified.

Earthing with and including GI earth plate electrode 6 mm thick of size 600 mm x 600 mm with 4 Sq. mm GI wire earthing lead including test point complete all as shown in electrical plate No. 3 and specified in Particular Specifications clause 3.3.1 of contract, IN REPAIR. NOTE: (a) The unit rate includes earthing lead and protection pipe upto 7.5 metre from top of earth plate. (b) Factory made precast PCC pit with cover shall be fixed at least 500 mm away from earth pit.

Envirnment friendly, energy saving surface mounted, decorative 6.5 W bulk head LED luminaire with premium quality diffuser for glarefree light, 6000K complete. MAKE: Havells Cat Part No. LHEXCGP7ION5W006 or equivalent in makes mentioned in Appendix 'B' here-in-after.

Surface mounted envirnment friendly decorative ultra slim profile LED 10 W lighting fixture with extruded polycarbonate, 6500K, lumen output should not be less than 90 lumens per watt complete. MAKE: Havells Cat Part No. LHEXACP7PN1W010 or equivalent in makes mentioned in Appendix 'B' here-in-after.

Surface mounted envirnment friendly decorative ultra slim almn LED 22 W lighting 6500K, lumen output should not be less than 90 lumens per watt complete. MAKE: Havells Cat Part No. LHEXBTP7IN1S022 or equivalent in makes mentioned in Appendix 'B' here-in-after.

Recess mounted bottom opening LED 40W cleanroom luminaire (2x2) CRCA powder coated housing, IP- 54 protection, suitable for grid ceiling lumen output should not be less than 90 lumens per watt complete. MAKE: CROMPTON Cat Part No.LCBOR-40-CDL or equivalent in makes mentioned in Appendix 'B' here-in-after.

Collecton of items like ceiling fans, exhaust fans, wall mounted fans, cabin/table fans, flame proof ceiling fans from EM store yard for repair, transporting to workshop, opening and reassembling after including necessary cleaning greasing oiling etc, testing and depositing back to EM store yard of GE (AF) Adampur including necessary loading unloading and transporting etc. complete. NOTE: Supply only spares & rewinding of fan(s) shall be measured & paid for separately under respective items of BoQ.

Rewinding fan of any description with super enamelled copper winding wire of size, gauge & weight as per original specifications providing insulating material and varnishing with synthetic varnish, oiling, greasing, to the entire satisfaction of Engineer-in-Charge including taking out burnt winding wire after opening the ceiling fan of size: -

Ceiling fan 1200 mm sweep

Ceiling fan 1400 mm sweep

Exhaust fan 300 mm sweep

Exhaust fan 450 mm sweep

Wall mounted fan 650 mm sweep

Cabin/table fan 450 mm sweep

NOTE: Collecton of fan items from EM store yard, transporting to workshop and back including loading unloading shall be measured & paid for separately under respective items of BoQ.

Supply only spares for fans IN RELACEMENT as under: -

Gun metal bush for ceiling fan 1200/1400 mm sweep complete.

Ball bearing suitable for ceiling fan 1200/1400 mm sweep, complete.

MS bright finished U clamp with nut, bolt, pins and washers suitable for ceiling fan 1200/1400 mm sweep, complete.

Synthetic rubber reel type bush with hole suitable for ceiling fan 1200/1400 mm sweep, complete.

Condenser capacity 2.5-4 MFD suitable for AC supply ceiling fan 1200/1400 mm sweep, complete.

Ball bearing suitable for exhaust fan 300 mm sweep, complete.

Ball bearing suitable for exhaust fan 400-450 mm sweep, complete.

Ball bearing suitable for wall mounted table/cabin fan upto 650 mm sweep, complete.

PVC flexible Copper wire size 23/.0076 twin core, required length as directed, complete all as specified.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete with batten, casing caping of MS or and PVC conduit on surface or concealed, including switches, ceiling roses, pendants, regulators, sockets, mild steel terminal boxes etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified.

Taking down carefully copper/aluminium sub main wiring complete, including existing batten/conduit consealed/surface etc., removing materials and making good disturbed surfaces due to taking down etc. to the entire satisfaction of Engineer-In-Charge, complete all as specified.

Dismantling of unservisible existing DBs of any description with all accessories and MCBs, isolators etc. and making good surface as per existing, complete all as specified.

Taking down carefully light fitting of any description, complete all as specified.

Taking down carefully electric bell/buzzer of any description, complete all as specified.

M/s Sahib and Company