REPAIRS TO ALUMINUM DOOR/WINDOW, PARTITION AND ALLIED WORKS AT AF STN UNDER GE(AF) CHABUA

Amount

Taking down chowkat with shutters of any description without taking off shutters from frame area nexc 1.50 Sqm complete all as specified and as directed.

Taking down chowkat with shutters of any description without taking off shutters from frame area exc 1.50 Sqm but not exc 4.00 sqm complete all as specified and as directed.

Taking down shutter of any description nexc 1.00 Sqm each complete all as specified and as directed.

Taking down shutter of any description exc 1.00 Sqm and n.exc 2.0 Sqm each complete all as specified and as directed.

S&F powder coated aluminium door with frame made with aluminium section of size 100 x 44 x 2 mm thick, vertical styles of shutters made with sections 65 x 44 x 2 mm thick, and top/middle/bottom rail of shutter with section 84 x 44 x 2 mm thick, including 5 mm thick tinted glass panes, insets including necessary fixing arrangement, joining cleats, glazing clips, rubber packing aluminium anodized beading screws etc, 100mm size hinges, tower bolt 200 mm size, mortice lock 100 mm size 4 lever, 200mm size round handles etc, fitted to shutters and frames fixed in opening with aluminium hold fast of 25 x 3 mm flat 150 mm long 6 nos in each frame incl cutting holes in brick work and embedded in PCC 1:2:4 bed block of size 150 x 150 x 150 mm each and match the existing complete all as directed.

S&F powder coated aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodized aluminium snap beading, screws, anodized aluminium fittings such as peg stays 150mm long (2 No.) hinge type B-21 100mm long (2 No.) suitable handle (1 No.) complete all as specified and as directed.

S&F powder coated aluminium frame for doors, windows, ventilators, partitions etc with one or more rebates including joining cleats for fixing on walls/ floors of any description and in any position complete all a specified and as directed.

M&L for fixing 12 mm thick toughened glass partitions fixed with taunton 'L' Connector with necessary filling up gaps at top and bottom and sides, including taking down old glass partition, complete all as specified and directed.

M & L for fixing ACP in repairs (aluminium composite panel) 4.5 mm thickness to Aluminium substructure at any height in any colour (as approved by Engr-in-Charge) Non Toxic PE core-3 mm, and back coil 0.5 mm) with minimum 30 +/- 5 mirror PVDF coating on top coil polyester / epoxy coating on back coil (7+/- 2 micron) fixed on aluminium substructures (size aluminium sections for substructure as specified by manufacture/specified in drawings and approved by Engr in Charge) with stainless steel fastening system of HG/fisher Dash fastener on façade surface of any description not otherwise described and making 15 mm groove and applying non staining and non stinking sealant complete as per approved specification on straight surfaces. Aluminium composite panel cladding to be approved by Engr-in-charge. Rate quoted shall include sealing joints with sealcoat of approved make with rod to make at any light. Material & labour required for fixing of ACP including SS anchor fastener, aluminium cleat of size 19 x 12 x 1.6 mm weather sealant backer rod etc are included in the quoted rate of ACP complete all as specified and as directed. Note:- (i) Aluminum frame to fix above said ACP shall be measured and paid separately. (ii) The rate for aluminium sub structure is deemed to be included and will not be paid separately.

S&F in repair 5.5mm thick plain glass, ordinary quality and glazing with oil putty/aluminium glazing clips in squares nexc 0.5 Sqm in each pane complete all as specified and as directed.

All as per item No. 12 here-in-before but exc 0.5 Sqm in each pane 5.5 mm thick sheet glass complete all as specified and as directed.

S&F in repairs stainless steel grade 303, welded joints of the SS pipes/rectangular size and with existing MS Balusters should be finished smooth by mechanical grinding and rubbing etc as directed. Note:- The rate is deemed to be included for the dismantling of the existing wooden hand rails and making good the disturbed surface matching with the existing adjoining surface complete all as specified and directed.

S&F stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapled in wooden door/windows complete all as specified and as directed.

S&F in repair stainless steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel wire stapled in wooden door/windows complete all as specified and as directed.

S&F power coated aluminium grill with mesh 75 mm and aluminium bar 6 mm XPM type including all accessories such as channels for fixing grill screws etc aluminium section 15 micron thick anodizing along with stainless steel wire cloth complete all as specified and as directed.

S&F in repair aluminium (extruded section) door closer hydraulically regulated designation No 2 universal type suitable for door shutters of 701 to 850mm in width and of weight between 36 to 60 kg complete all as specified and as directed.

S&F in repairs Double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty floor spring for aluminum/glass door shutter of required size and making good to surface complete all as specified and directed.

Taking down of aluminum/Glass doors carefully and re-fixing in same opening after necessary repairing/ cleaning/ greasing and overhauling of the complete door assembly and make the same fully functional all as specified and directed.

Minor repair to aluminum/glass doors, windows, partitions and making good the same (i.e. Handles, hinges, rubber beadings, clips etc) complete all as specified and directed.

S&F in repair's Solid PVC Wall Lining consisting of 5mm thick single side prelam PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications complete all as specified and as directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification complete all as specified and as directed.

S&F stainless steel butt hinges 100mm size medium weight, complete all as specified and as directed.

S&F for 200 mm long anodized aluminium barrel tower bolt of extruded section complete all as specified and as directed.

S&F 300mm long aluminium anodized sliding door bolt with hasp staple (bolt type) and fixing clips of sheet cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed complete all as specified and as directed.

S&F Aluminum anodized barrel tower bolt 150 mm long extruded section complete all as specified and as directed.

S&F Extruded aluminium alloy handle 150 mm long fabricated type anodized complete all as specified and as directed.

S&F aluminium Mortice lock, vertical type, size 75 mm 4 Levels complete all as specified and as directed.

S&F in repairs aluminium Mortice lock, vertical type, size 75 mm 4 Levels complete all as specified and as directed.

Dismantling floor, hearth or wall tiling incl cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises, complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings nexc 15cm thickness (below or above ground level) , complete all as specified and as directed by Engr-in-Charge.

M&L for cement concrete type B-0 (1:2:4) using 12.5mm graded agg as in flooring 25mm thick as in sub base floor complete all as specified and directed.

M&L for non skid ceramic coloured tiles 8mm thick (square or rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18sqm, in floor etc and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tile including screed bed of mortar 15 mm thick in CM (1:6) complete all as specified and directed.

All as per item No 35 here-in-before but on dado/skirting over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed.

M&L for vitrified ceramic tiles 10 mm thick (square/rectangular) Dark Shade polished area of each tiles not exceeding 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and directed.

All as per item No 37 here-in-before but on dado / skirting over and including 10mm thick rendering in CM 1:4, complete all as specified and as directed.

M&L for glazed ceramic coloured tiles (light shade) of size 350x250x7mm/450x300x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in CM (1:4) complete all as specified and as directed.

M&L for glazed ceramic coloured tiles (light shade) of size 300x600x7mm/300x900x7mm thick for work on vertical surface such as skirting, dado, set & jointed neat in cement slurry and pointed in white or coloured cement to match including 10 mm thick plaster in CM (1:4) complete all as specified and as directed.

M&L for coloured rustic tiles 7 to 8mm thick (square/rectangular) area of each tile 0.11 Sqm but n.exc 0.18 Sqm in floor/path set and jointed in neat cement slurry and pointed in white/coloured cement to match including 15 mm thick screed bed in cm 1:6 complete all as specified and as directed.

Dismantling of stone slab of any description including cement mortar bedding but not backing, complete all as specified and as directed.

M&L for 18 to 20 mm thick granite of any type/colour as approved, work (table rubbed mirror polished) edges rounded chamfered and bull nosed laid and fixed in any position (Vertical/Horizontal/Inclined) over and including cement screed over Cement mortar bedding in CM (1:4) 10 thick and pointed in white or colour cement with admixer of pigment to match with shade of granite stone incl grinding and polishing complete all as specified and as directed by Engr-in-Charge.

Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 15 mm bore pipe complete all as specified and directed.

Taking up or down steel tubing and connection including cleaning for re-fixing or removal to store for 20 mm bore pipe complete all as specified and directed.

S&F steel tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors for 15 mm bore complete all as specified and directed.

S&F tubes medium grade, galvanized with all fittings and fixed complete to walls and ceiling or laid in floors for 20 mm bore complete all as specified and directed.

Cutting chases for concealed water tubing and making good in CM 1:3 on brick wall cutting nexc 10 Cm in girth complete all as specified and directed.

Supply and fixed in repair of PVC low level flushing cistern 10 Ltr capacity ISI mark syphonic action type push button incl flush pipe, ball valve, handle incl bracket complete all as specified and directed.

S&F PVC connection 15 mm size with PTMT nut of length 450 mm complete all as specified and directed.

S & F in repairs 15 mm dia bore cast copper alloy chromium plated angle cock/stop cock screwed down high pressure with capstan head, screwed both ends for iron pipes or for union and fixed, complete all as specified and as directed.

S& F in repairs bib taps CP brass fancy type with crutch or butterfly handle screwed down screwed for iron pipe for brass ferrule 15 mm dia complete all as specified and as directed.

S&F in repairs 15 mm dia bore fancy type pillar taps, cast copper alloy chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with capstan head, screwed for iron pipes or for union and fixed, complete all as specified and as directed.

S&F in repairs 15 mm dia bore cast copper alloy chromium plated fancy type wall mixer with provision for overhead shower with and 115mm long bend pipe for cold & hot water complete all as specified and as directed.

S&F in repairs 15mm dia Centre hole mixer for WHB with connections cast copper alloy with capstan heads, chromium plated screwed down high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts screwed for iron pipe complete all as specified and as directed.

S&F in repair chromium plated overhead Shower dia 180 mm Round Shape single flow with and shower arm dia 20 mm & 450mm long round shape with 90 degree for wall mounted shower with flange complete all as specified and as directed.

S&F in repairs floor mounted coupled closet of size 800x365x650 mm, trap distance S-250 mm including dual flush fittings with soft close seat cover complete all as specified and directed.

S & F in repair vitreous china wall hung wash hand basin size 200x550x400mm including full Pedestal brackets, Including Waste fittings, brass, chromium plated for glazed ware sinks, basins, etc. with long screwed shanks and fly-nuts, flange end bedded in red lead cement and fixed complete all as specified and directed.

S&F in repair chromium plated hand shower (health faucet), telephonic type with 8mm dia, 1 meter long CP flexible tube with wall hook and jet of approved make, suitable for 15 mm bore iron pipes or for unions and fixed complete all as specified and directed.

S&F in repair toilet paper holder, twin type CP fixed to wall with chromium plated brass screws and rawl plugs complete all as specified and directed.

S&F in repairs for Corner Glass shelf with bracket consisting of 5.5 mm thick sheet glass with chromium plated bracket guard complete all as specified and directed.

S&F in repairs Soap dish holder brass chromium plated fixed with rawl plug complete all as specified and directed.

S&F in repairs 25 mm dia aluminium drapery rod with natural wooden finish and wooden ornamental attachment at both ends and matching curtains rings min 8 nos in one mtrs, complete all as specified and as directed.

S&F in repair PVC (PTMT alloy) bath room cabinet with mirror completes all as specified and as directed.

M&L for stainless steel Towel Rack with lower hanger with hook, fixed to wall with rawl plug complete all as specified & directed.

S&F in repairs vitreous china wash down water closet pan (pedestal pattern) coloured (including two Nos fixing bolts incl PVC seat cover but excluding flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

Dismantling of structural steel work including doors, gates but excluding frame truss etc complete all as specified and as directed.

S&F framed work such as grills, gratings etc. with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed.

S&F framed work for ornamental and intricate design portions framed and hung as gates, including pintle hinges, stops, hand-made sliding bolts, etc with ends of bars shouldered and or rebated or forged into spikes, framed guard bars etc confirming to Fe-290-Gde-E-165 complete all as specified and as directed.

S&F in repairs vitreous china wash down water closet pan (Cascade pattern) coloured, fancy type (including two Nos fixing bolts incl PVC seat cover but including flushing cistern and flush pipe) complete including making good to floor with and including fixing of P or S trap, complete all as specified and as directed.

Dismantling asbestos cement (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed.

M&L for 6 mm thick asbestos cement, corrugated or semi corrugated sheet in roofs, wall fixed with L- type or "J" or cranked hook bolts etc complete all as specified and as directed.

S&F asbestos cement two piece adjustable serrated ridge for corrugated or semi corrugated sheets with 'L' or 'J' type or cranked hook bolt complete all as specified and as directed.

S&F in repairs 0.63mm thick class VII corrugated galvanized mild steel sheeting with two corrugation side lap fixed with J hooks in roof complete all as specified and directed.

S&F in repairs Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and as directed.

S&F in repairs prepainted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of colour having tensile strength of 550 Mpa as in plain sheet as in ridges, gutters, facia bd etc l, fixed with self tapping screws or 'J' / 'L' hooks all as specified and directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position of framed work complete all as specified and as directed.

Dismantling timber scantling 40 Sqcm and over in section, in any position of unframed work complete all as specified and as directed.

Dismantling timber scantling in fillets, rails, posts, rafters, purlins, etc. under 40 sqcm in section complete all as specified and directed.

S&F rolled mild steel work in tubular trusses, rafters, purlins, posts, flat sections etc incl necessary welding/fabrications using Fe 410-W (Gde E-250 Quality- A) complete all as specified and directed.

Dismantling wall and ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets any thickness including cover fillets complete all as specified and directed.

S & F for suspended false ceiling using anodized GI exposed ceiling suspension system of grid size 60 cm x 60 cm width main runner 'T' size 24 mm x 24 mm x 0.3 mm thickness and cores Tee of size 24 mm x 24 mm x 0.43 mm thick (using 60 cm x 60 cm E board classic 4 mm thick ceiling board) to be placed in grid of GI system duly suspended with 4 mm dia GI bar hanger fixed with steel dash fasteners or iron purlin from the roof with adjustment clip providing position for light fixtures, air conditioning diffuser and ducks, sprinkler, smoke detector etc. The main runner to be secured to structural soffit by hanger @ 1220 mm maximum C/C. The last hanger at the end of each runner should not be placed at more than 450 mm from the adjacent wall. Flush fitting 1200 mm cross 'T' to be inter locked between main runner @ 610 mm C/C so as to form 600 mm x 600 mm grid complete all as specified and directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and directed.

M&L for brick work with sub class 'B' bricks, straight or curved on plan exc 6 m mean radius built in CM 1:6 complete all as specified and directed.

Taking down cement plaster including raking out joints hacking for key, scrubbing down with water, complete all as specified and as directed.

M&L for rendering 15mm thick plaster in CM (1:6) on brick or concrete surfaces finished even & smooth, complete all as specified and as directed.

M&L for two coats of oil bound distemper over a coat of primer on newly plastered surface of wall over a coat of 3 mm thick wall care putty including preparation of surface, complete all as specified and as directed.

M&L for preparation of new or previously untreated wooden surfaces over 10 cm in width or girth and applying two coats of synthetic enamel paint over one coat of pink primer, complete all as specified and directed

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

Demolition of cement concrete reinforced cut as required to facilitate demolition complete all as specified and as directed.

M & L for RCC 1:2:4 type B1 (Using 20mm Graded Aggregate) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for TMT Steel Bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed.

M&L for Form Work to soffits of suspended slab such as roof slab and similar work nexc 200 mm thick (Horizontal or Slopping) fair finished flat surface complete all as specified and directed.

M&L for Form Work to edges of concrete flats, treads, break in floor & roofs n.exc 20 cm wide horizontal or slopping and similar works fair finished flat surface complete all as specified and directed.

Schedule of Credit

M/S P R SINGH AND SONS

M/s Parma Construction

M/S R G Construction

M/s KL Agarwalla & Co

D B Construction

M/S DURGA CONSTRUCTION & CO