SPECIAL REPAIR TO STORAGE ACCOMMODATION AT BSO AND E/M YARD AT GE (AF) BAMRAULI

Amount

Dismantling of Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed.

S&F Plain, galvanised, mild steel sheeting, (0.63 mm thick )in ridges, hips, valley gutters, drip and straight flashings (length and girth asfixed) with grade of zinc coating 275 complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F Framed brackets of angles or tees with web and flanges cut to shape, drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc.. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 (Brackets over 10 kg each to be measured under 'Structural Steel') complete all as specified and directed.

M&L for steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to I.S 1161-1979 at grade st 240.complete all specified as directed.

M&L for preparing new or previously untreated surfaces of steel abd steel based materials of any description not exceeding10 cm in width or girth when un-connected with other painting or when painted in different tint and applying applying two coats of synthetic enamel paint over one coat of red oxide complete all as specified and directed.

Surface dressing n exc15 cm deep and getting out in loose/soft soil complete all as specified as directed.

Excavating in post holes (or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm complete all as specified as directed.

Surface excavation n.exc (not exceeding) 30 cm deep and veraging 15cm deep and getting out and getting out in loose/soft soil complete all as specified as directed.

Removing excavated soil n.exc 50m and depositing where directed at a level n.exc1.5m above the starting point etc complete all as specified as directed.

M&L for Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified as directed.

M&L for PCC 1:4:8 type D-2 (40mm graded aggregate) Cement concrete in foundations filling and mass concrete etc complete all as specified as directed.

Demolition of cement concrete (unreinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level) omplete all as specified and directed.

M&L for 75mm thick cement concrete type C-2 1:3:6 (using 40 mm graded stone aggregate) as in plinth protection finished surface even and smooth without using extra cement complete all as specified and directed.

M&L for 75mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in flooring in size of panel 2X2 mtr with Glass dividing strips, 3 mm thick and 38mm wide complete all as specified as directed.

M&L for Glass dividing strips, 3 mm thick,inserted in position,conform to design and 38mm wide complete all as specified as directed.

M&L for Chequered cement concrete tiles 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over 20mm thick screed bed in cement mortar (1:6) including jointing with neat cement slurry mixing pigment to match the colour etc complete all as specified and directed.

M&L for plain cement concrete (1:4:8) type D2 ( using 40mm graded stone aggregate ) as in sub base of flooring mass concrete, foundation etc, complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking Colour paver block glazed any shape and size confirming to IS 15658-2006 of 80 mm thickness, M-40 grade etc complete all as specified and directed.

M&L for 30mm thick sand cushion below inter locking paving tiles including spreading, levelling and compaction complete all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in beching and coping, bed block lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified and directed.

Demolition of brickwork built in cement or cement lime mortar complete all as specified and directed.

M&L for Brick work with sub class ‘B’ bricks, straight or curved on plan exceeding 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc, incl raking out joints, hacking for key, scrubbing down with water, etc & prepare to receive new plaster complete all as specified and directed

M&L for 15mm thick rendering in CM 1:6 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for 15mm thick rendering in CM 1:4 on fair faces of brick work, surfaces finished even and fair without using extra cement complete all as specified and directed

M&L for applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over new plaster surfaces of walls complete all as specified and directed.

M&L for preparation of new plaster surfaces of walls and applying two coats of oil bound distemper over 1.5 mm wall care putty complete all as specified and directed by Engg-in-Charge.

M&L for complete removing existing treatment on wall surface and applying two coats of oil bound distemper over 1.5 mm wall care putty complete all as specified and directed by Engg-in-Charge.

M&L for complete removal of existing treatment and applying two coats of 100% premium acrylic emulsion paint having VOC less than 50gm / liter and UV resistance as per IS15489:2004, Alkali & fungal resistance dirt resistance exterior paint of required shade (company depot tinted) with silicon additives @ 1.43 litre /10sqm over and including priming coat of exterior primer applied @0.90 litre/10 sqm over old surfaces of walls complete all as specified and directed.

M&L for Preparation of old painted steel surfaces of any description, over 10 cm width or girth and applying one coat of synthetic enamel paint (ordinary tint), complete all as specified and directed.

M&L for preparation of old wooden Surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified as directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.5mm graded aggregate) complete all as specified and directed.

M&L for Non skid ceramic jointless coloured tiles 7 to 8mm thick (square/ rectangular) area of each tiles exceeding 0.06 sqm but not exc 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed.

M&L for glazed ceramic tiles in vertical surfaces of size 450x350x7mm thick set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including rendering 10 mm thick in cement mortor (1:4) on vertical surface as in backing coat all as specified and directed.

M&L for double charged Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each iles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match floors etc. set and jointed in neat cement slurry and pointed with white as coloured cement to match over and including 15mm thick screed bed in cement mortor (1:6) complete all as specified and directed.

Taking down chowkats with shutters not exceeding 1.5 Sqm each (without taking off shutters from the frames) complete all as specified and directed

Taking down chowkats or frames with shutters (without taking of shutters from the frames) exceeding 1.5 Sqm but not exceeding 4 Sqm each complete all as specified and directed

Taking down shutters of any description exceeding 1 Sqm but not exceeding 2 Sqm each complete all as specified and directed

S&F steel window with side hung shutter (mosquito proof ) with box type hinge, steel peg stay, lugs, handles, without glazing bars complete including one shop coat of red oxide primer. .

S&F steel window with side hung shutter ( glazed) including box type hinges, steel handle, peg stay lugs complete with glazing bars and painted with one soap coat of red oxide primer.

S&F in repair Galvanised mild steel wire cloth, 0.56 nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples.

S&F in repair sheet glass 3mm thick, ordinary quality and glazing with oil putty in squares not exceeding 0.5Sqm in each pane complete all as spesified and directed

S&F Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube complete all as spesified and directed

S&F Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as spesified and directed

M&L for Pressed steel frames of size 105mm x 60mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc complete all as specified and directed

M&L for Mild steel conforming to Fe-290 Gde-E-165 in bands, straps, supports or stays for rain water, including bolts, if required, hook and pintle hinges; hand smade sliding bolts; clamps; hold fasts; hooks for hanging fans and similar small articles complete all as specified and directed

M&L for PCC 1:3:6 type C-0 using 12.5 mm granted stone aggregate as hold fast/filling in pressed steel frame complete all as specified and directed

S&F 30mm thick flush shutters, solid core construction with block board core and ply wood face panels commercial type on both side complete all as specified and directed.

S&F for Preparing new or previously untreated surfaces of wood and wood based materials of any description not exceeding10 cm in width or girth when un-connected with other painting or when painted in different tint and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

S&F for Aluminium alloy, anodised, sliding door bolt 250mm long, with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S&F for Aluminium handles, cast type anodised,150mm size complete all as specified and directed.

S&F Aluminium anodised barrel tower bolts of extruded section, 150mm long complete all as specified and directed.

M&L for providing & fixing false ceiling at all heights with semi peforated 12 mm thick micro tengular edged GRG (Glass Fibre Reinforced Gypsum) false eiling tiles of 12mm Size 595 x 595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance 99%, NRC0.50 to 0.75 as per IS 8225:1987, Noncombustible as per BS tiles tiles 476 (part 4 )-1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on interlocking metal T-Grid of hot dipped galvanized iron section of 0.33mm thick (galvanized @ 120 grams per sqm including both sides) comprising of mainT runners of size 15 x 32 mm of length 3000mm,cross-T of size 15x 32mm of length 1200mm and secondary intermediate cross-T of size 15 x 32 mm of length 00mm to form grid module of s1ze 600x 600mm , suspended from ceiling using galvanized mild steel items (galvanizing @ 80 grams per sqm) i.e 50mm long, 8mm outer diameter M-6 dash fasteners, 6mm dia fully threaded hanger rod upto 1 OOOmm length and Lshape level adjuster of size 85x25x2mm. Galvanised iron perimeter wall angle of size 24x 24x0.40mm of length 3000 mm to be fixed on periphery wall I partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-inCharge. omplete all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, includinguding cover fillets all as specified and directed.

S&F Solid PVC wall lining consisting of 5 mm thick any colour or pattern single side prelaminated PVC sheet inclusive of solvent cement and fixing at site on PVC frames as specification and drawing.

S&F 5 mm thick Solid PVC sheet fillet of width 35mm for wall panelling inclusive of fixing on to the wall with screw make PVC frame all as per specification and drawing.

S&F roller blind decorated horizontal type with necessary pulling threads aluminium channel along with all arrangement tixed to wall completed all as sspecified & directed.(Make vista)

S&F in repair powder coating anodised aluminium glass partion wall with frame size 101.60 x 44.45 x 2.00 mm thick and shutter aluminium anodised an top rail 47.62 x 44.45 x 1.50mm and style 47.5 x 44.5 x 1.50 mm lock rail 83.5 x 44.45 x1.50mm and bottom rail 150.00 x 44.50 x 2.50 mm with 5.mm thick plain glass including lock and necessary fitting and fixture complete all as specified and directed.

S&F in repair powder coated anodised aluminium doors (sliding/ hanging type) with frame size 101.60 x 44.45 x 2.00 mm thick and shutter aluminium anodised and top rail 47.62 x 44.45 x 1.50 mm style 47.5 x 44.5x1.5mm, lock rail 83.50 x 44.45 x 1.50 mm and bottom rail 150.00 x 44.50 x 2.50 mm including necessary aluminium fittings like aluminium butt hinges 04 Nos, aluminium handle 150mm 02 Nos, aluminium tower bolts 200 mm 01 No, aluminium door stopper 01 Nos, jointing cleats glazing cleats, rubber packing, anodised aluminium shape beading screws etc with panelling in two parts with 12mm thick prelaminted particle board in lower panel and 5mm thick tinted glass in upper panels including all fittings & fixture complete all as specified and directed.

S&F powder coating aluminium anodized grills powder coated with 6x5mm aluminium section having square gap of 100mm thick with fixing rails of channels 12-15mm complete all as directed

Note :- Credit shown in credit schedule of tender document shall be considered by the tenderer while quoting the rates of various items. The same shall be recovered from various payment to contractor before handing over old material

Minakshi Construction

HIMANSHU TRADERS

R.K.ASSOCIATES

Shivam Traders

Abhinav Builders

VIPUL CONSTRUCTIONS

M/S SATISH KUMAR

Aditi Construction Company

M/S SWASTIK BUILDERS