10/HDA/EC-ELECT/2025 2026

Amount

Supply & delivery of 8 Mtr. Hot Dipped galvanized Octagonal Pole of 3 mm Thickness, having Top OD 70 mm and Bottom OD 135 mm with G.I 4nos. of J- bolt, M-20, 600mm long, 12nos. of Nuts with 16nos. of washers for foundation and Straight arm of maximum 1.5 Mtr. in Length (Refer to the Specification and Drawing in Annexure-I and follow Rate submission form-I). The rate should include testing at your works, all taxes and delivery the materials at Haldia. (Make: Utkarsh India Ltd/Electro Pole Products Pvt. Ltd/Transrail Lighting Limited/Bajaj Electricals Ltd).

Preparation of RCC foundation of 400 mm dia and 1500 mm height (1200 mm below the Ground Level and 300 mm above the Ground Level) with required rod, cement, chips and sand etc. at the ratio 1:1:5:3 with ground bolt 4 nos. for fixing the 8 Mtr Height G.I Octagonal pole (excluding supply and delivery of 8 M Pole and Nut Bolts).

Installation of 8 Mt long G.I octagonal poles.

Supply, drawing and Connection of luminaries with 3C X 1.5 Sq.mm pvc insulated FR copper conductor through the Poles from looping box to light fittings as required.[ Havells/Polycab/Finolax]

Fixing only Street / Floodlight Fitting with suitable tie clamps and MS plate for mounting on Pole/Tower or similar structure. (excluding the cost of RCC Foundation)

Supply and fixing of SPMCB "C" Curve 1-4 Amp with ISI marked to be placed on a din channel of Pole and connection with Terminal connector at the suitable location of the pole.(Legrand)

Supply and Installation of HDA printed logo suitable 15"×9" on GI Octagonal Pole. (3 nos. logo p/pole,)

Lifting of the running Under Ground Cable coming to the looping cable Box upto the top of the muffing above the top of the ground level by drawing through 40 mm dia rigid pvc pipe of superior Quality and tiding the same by no 10 SWG G I wire with the pole including supply of pipe & wire & filling the top of the pipe/pipe hole with bitumen and neat cementing properly (average run- 1.5 mtrs./run X 2 runs per pole).

Supply and fixing of Pole numbering Sticker (5" X 3") at the street light pole.

Supply GI earth Spike (1830 X 20 mm) (Each Pole) including installation.

Supply and delivery of 1.1 KV grade 2 C X 6 Sq mm XLPE insulated and PVC sheathed aluminum armored Cable. As per IS 7098 Part -1 with latest amendment if any. [Havells/Polycab/Gloster/ KEI].

Supplying & delivery of 90 Watt LED street light with additional 10 KV 10 kA SPD with pressure die cast aluminium housing, IP66 protection, road way luminaire with high power LED .Make & Model No: Philips (model no. BRP502 LED126 CW R3C PSU S1 SPD) or Equvallant as per direction of EIC.

Laying of one No. cable upto 35 Sq mm in underground trench 460 mm wide x 760 mm average depth, with brick protection on the top of the cable with 8 (eight) Nos. bricks per meter, including filling the space between the brick & cable and also the trench with shifted soil, leveling up and restoring surface duly rammed.

Finishing of the XLPE/PVC insulated armoured cable ends by soldering with cable sockets and insulated tapes etc., including supplying sockets, soldering materials, tapes etc. and making connection to switch, BDB and BBC etc.

2 Core X 6 Sqmm

Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. as required and mending good damages. 6 SWG.

Priming one coat on timber or plastered surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. ( 0.75 sqM /8 Mtr Pole x 2).

Painting the vertical end faces of posts, wheel guards or railing or parapet with alternate bands of different colours as directed by the Engineer-in-charge with approved synthetic enamel paint.( 0.75 sqM /8 Mtr Pole x 2).

GST @18% of Total Amount

CESS @1% (Total Amount including GST)

Electro Engineering Concern (BID ID -6896310)

S. D. Construction (BID ID -6896968)