Estimate for providing New Gate and Gearing System and Remodeling of canal Regulating structures at RD 90000 of Jalandhar Distrubutory.

Amount

Dismantling brick work tile, masonry or tile lining in cement

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, construction of shoring and bracing, removal of stumps and other deleterious matter, dressing of sides and bottom and backfilling with excavated surplus soil.

Cement concrete 1:3:6 mixing by mechanical means using concrete mixer volumetric type

Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.RCC Grade M25 Using Concrete Mixer.

Plain/Reinforced cement concrete in sub-structure complete as per drawing and Technical Specifications RCC Grade M25 Height upto 5m Using Concrete Mixer

Providing and laying of Filter media with granular materials/stone crushed aggregates satisfying the requirements laid down in clause 2504.2.2. of MoRTH specifications to a thickness of not less than 600 mm with smaller size towards the soil and bigger size towards the wall and provided over the entire surface behind abutment, wing wall and return wall to the full height compacted to a firm condition complete as per drawing and Technical Specification

Nicking cement concrete surface (over 28days old including preparation and layingslurry

First class burnt brick work laid in cement sand mortar 1:3 in first storey upto 4 metres above plinth level

Finishing walls with exterior decorative cement based paint such as snowcem, robbiacem etc. two or more coats to give an even shade

Painting leveling staff with synthetic enamel paint (b) two coat work

Painting new letters and figures of black synthetic enamel paint to an even shade

Putting 1:3 (Cement:water) cement slurry with cement @ 2.25 kg per sqm on prepared bed and side slopes before laying concrete on bed and side slopes.

Cement concrete lining 75mm thick or less (for 60 mm)laid manually for irrigation channels, using cement concrete M- 15 with cement content 325 kg/Cum mixed in an automatic computerized Batching & Mixing Plant and transported to the site in transit mixers (FOR TRAPEZOIDAL SECTION AND CUP SECTION OF ALL RADII)

Providing and laying cement concrete M-15 for coping mixed in automatic computerised batching and mixing plant and transported to the site in transit mixers complete in all respect in PWD specifications

Dressing of Side Slopes and prepration of sub grade for lining complete in all respect as per pwd specification.

Supplying, fitting and placing HYSD bar reinforcement in sub structure complete as per drawing and Technical Specifications.

Providing skin plate of Gates (8mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing skin plate of Gates (10mm) of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Providing and fixing Structural Steel work complete in all respects and to entire satisfaction of Engineer-in-charge

Providing & Fixing MS Plate of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Steel casting as per I.S. specification & grade complete in all repects and to entire satisfaction of engineer-in-charge.

Providing Chequred Plate 6,8mm thickness of desired shape and size complete in all respect and to entire satisfaction of engineer in-charge.

Brass Casing as per IS specification & grade complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing GI Pipe of various sizes complete in all respect and to entire satisfaction of engineer in-charge.

Providing & Fixing MS J Bolt with nut and washer dia 20 mm complete in all respects and to entire satisfication of engineer in charge.

Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of Engineer-in-charge

Providingof hollow bulb seal( Side Seal ) and fixing of position including prepration of the surface complete in all respect and entire satisfaction of engineer in charge

Providing and Fixing in Position of flat/wedge seal including preparion of surface complete in all respects and to entire satisfaction of Engineer-in-charge size 75*12mm.

Providing and Fixing MS Nut and Bolts of all Sizes and length required and to entire satisfaction of Engineer-in-charge.

Supply of Multipurpose synthetic Grease Complete in all respects and to entire satisfaction of engineer-in-charge.

Supply of Multigrade Mobile oil 10w-40 or 10w-50 Complete in all respects and to entire satisfaction of engineer-in-charge.

Providing High Speed Diesel

Applying priming coat with metal primer on new steel or iron work i/c preperation of surface.

Finishing with epoxy paint two or more coat at all locations prepared and applied as per manufacturer specifications complete.

Fillet Welding with high strength steel rods complete in all respects and to entire satisfaction of enginer incharge (i) 6 mm wide.

Providing and Fixing M.S. spindle with Double start or triple start threading 11 ft height 1/3/4" dia complete (i) upto 1.5 ton Capacity.

Providing and Fixing M.S. spindle with Double start or triple start threading 11 ft height 1/3/4" dia complete (ii) 1.5 to 2 ton Capacity.

CI Housing Cover with worm & worm wheel assembly shaft ,Handle GM Bust with triple start threading inside for spindle complete including labour charges

Commissing and testing of gates at site complete in all respects and to entire satisfaction of enginer incharge

Lifting Arrangement with crane 35 tonne capacity

Any Other Item

SHRI SIDHI VINAYAK INDUSTRIES