Partial diversion of 3.3KV OHL at Hospital Patch for supplying power to 160KVA Transformer installed at new location in Kusumtola Basti along with dismantling of 3.3KV OHL feeder existing along old working of Quarry No. 02 mine under Purnadih OCP

Amount

Erection of metallic pole of following length in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc as required. Above 10.00 Metre and upto 12.00 Metre.

Supplying and erection of stay set complete (galvanized) with 19/ 20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle (20 mm x 60 cm), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Erection of all aluminium conductor of 7/1.96 mm to 7/3.10 mm diameter and above including binding etc as required.

Erection of double pole 3 wire cross arm for 3.3kV/11 KV / 22 KV / 33 KV Over head lines as required.

Erection of pole top / straight two wire/ V shape two wire, angle iron / channel iron, cross arm on steel tubular/ rail/ PCC pole for 11/22/33 KV as required.

Supply and erection of 3.3KV/11 KV pin insulator complete with large steel head G.I pin, nuts, washers etc as required.

Erection of disc / pin insulator for 3.3kV/11 KV over head lines as required.

Supply of 8 / 6 SWG G.I. wire.

Erection of G.I. Wire No. 8 SWG including binding etc. as required.

Erection of cradle Guard as required.

Dismantling of over head lines comprising of copper / aluminium over head conductor, G.I. wire, cross arms, insulators etc as required.

Dismantling of pole / street light standard / strut embedded in cement concrete foundation etc as required.

Total impact of GST for the purpose of CTC

M/S MEHTA ELECTRONICS

M/S DHARMENDRA KUMAR SINGH