GE 874/EWS-13/2021-22

Amount

B/R & E/M Portion

Dismantling of timber scantlings 40 Sqcm and over in section in any position in unframed work.

Demolition of concrete (unreinforced) in ground floors and pavings n.exc 15cm thickness (below or above ground level).

Plain Cement concrete (using 20mm graded crushed stone aggregates) as in hardstanding / pavements of flexural strength 40 kg/sqcm in field using 400 kg of cement per cumic meter thickness of concrete 25 cm or less (150 mm thickness), laid in panels and finishing the surface even and fair without using extra cement including use of formwork and making joints and rounding or chamfering exposed edges complete all as specified and directed.

Demolition of Brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars etc, but excluding ashlar facings, dressed stonework and precast concrete articles.

Dismantling boarding of any description, fixed in any position with nails.

Taking down cement plaster on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water, etc.

Second class soft wood as in scantling clean sawn fixed in position.

All as per item above but except wood complete all as specified and directed.

20 mm thick 2nd class soft wooden boarding, planed one side, with butt joints and fixed with nails in facia eaves boarding complete all as specified and directed.

All as per item above but except boarding complete as specified and directed.

Rendering 15 mm thick on other than fair face of brick work in cement mortar 1:4, finished even and smooth without using extra cement.

Preparation of New surfaces plastered or unplastered and applying two coats of cement base paint, white or tinted.

Preparation of Old surfaces plastered or unplastered and applying one coat of cement base paint, white or tinted.

Preparation of old painted surfaces of wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth, and applying one coat of synthetic enamel paint.

Raised pointing to random rubble or polygonal rubble, uncoursed or brought upto courses stone masonry, set in cement mortar 1:3.

Walling of random rubble, uncoursed well bonded, bedded and solidly hearted, built in Cement Mortar 1:6.

All as per item above but except stone, complete all as specified and directed.

Extra over stone walling for hammer dressing with maximum depression on face from straight edge held against the dressed surface not exceeding 20mm to face stones (lime and sand stone) and dressing of face beds and joints, complete all as specified.

Preparation of new or previously untreated concrete surfaces of any description,over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of primer complete all as specified and directed by Engr-in-charge.

Surface excavation not exceeding 30cm deep and averaging 15 cm deep and getting out in any type of soil, complete all as specified and directed.

Rolling and consolidation formation surfaces in cutting, rolled with 5 to 8 tonned power roller complete all as specified and as directed.

Hardcore of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 100 mm thick, watered and rammed to a true surface.

150mm thick Plain cement concrete type D2, 1:4:8 (40mm graded aggregate) as in sub base complete all as specified and directed.

150 mm thick PCC 1:2:4 type B1 (using 20mm graded crushed stone aggregate) as in hard standing/mass concrete all as directed.

M&L for finishing surface of concrete pavement, by brooming complete all as specified and directed.

Forming construction joints 30 mm deep x 10 mm wide, filled with sealing compound 'A' grade, complete all as specified and directed by Engr-in - charge.

Forming contraction (Dummy) joints by using mechanical equipment (dimond cutter) 65 mm deep x 10 mm wide filled with sealing compound grade 'A', complete all as specified and directed.

Removal of surplus excavated material n.exc. 50m and depositing where directed at level n.exc. 1.5m above the starting point.

Preparation of surfaces of right / flexible pavement, aprons and the like and painting lines, dashes, arrow, letter etc exceeding 10 cm width with one coat of aqua based road marking paints of tint white or golden yellow or orange or as required at site complete all as specified and directed.

Taking down carefully copper/ aluminium unserviceable/ perished point wiring (light, fan, socket or power complete including fixture and fittings such as switches, ceiling roses, pandents, regulators, sockets, light fittings, removing material from site for taking credit etc and making good disturbed surfaces of wall, floors, complete all as specifiecd and directed.

Points wiring for one light point/fan point/socket controlled by one switch with 1.5 sqmm PVC FRLS insulted un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm PVC FRLS insulted un-sheathed copper conductor single core multi stranded flexible cable as earth lead (using colour coding) in and including cable 1100 volts grade including casing capping (ISI marked) for one light/fan point including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the distrubed surfaces to match with the existing specification complete all as specified.

Point wiring for 3 pin socket outlet 5 Amps on same board controlled by one switch with 1.5 sqmm FRLS insulted un-sheathed copper conductor single core multi strand flexible cable and 1.5 sqmm FRLS insulted un-sheathed copper conductor single core multi stranded flexible cable as earth lead (using colour coding) in and including cable 1100 volts grade including casing and capping (ISI marked) including 2nd class hard wood rectangular block open recessed cover with 3mm thick plastic laminated sheet cover including cutting chases to wall making good the distrubed surfaces to match with the existing specification complete all as specified.

Point wiring for 3 pin socket outlet 15 Amps on the independent board controlled by one switch with 4.00 sqmm PVC FR insulted un-sheathed copper conductor single core multi strand flexible cable and 2.5 sqmm PVC FR insulted un-sheathed copper conductor single core cable (using colour coding) as earth lead in and including non metalic PVC capping casing meduim grade with all fittings (ISI marked) controlled by one switch including CI/MS sunk box of required size & as directed by Engineer in charge including 3mm thick plastic laminated top sheet cover,, including cutting chases to wall and making good the disturbed surfaces to match with the existing specification complete all as specfied.

Switch piano flush button type 5 Amp single pole one way, (ISI marked), complete all as specified.

Switch Socket combination 2 in 1,5 Amp flush type universal controlled by one switch (ISI Marked) complete all as specifed and directed.

Socket outlet 2 in 1, 6 pin,15A, flush type universal, all as specified and as directed. Make: Havells /Anchor

Ceiling rose surface bakelite three terminals 240 volts complete all as specified and as directed.

Lamp holder PVC case body of Bakelite with back plate suitable for batten fittings complete all as specified and as directed.

Sheet metal enclosure for SPN DBs (double door type), when MCBs to be used single pole and neutral 8 way incl blanking plate as reqd with 200 amps rated busbar 240V complete all as specified and directed. Make : Legrand, Havells/HPL.

MCB single pole 6 to 32 Amps 230 Volts'C' series, 10 KA complete all as specified and directed. Make: Havels /Legrand L&T.

MCB single pole & neutral 32 Amps 240 Volts'C' series, 10 KA complete all as specified and directed. Make: Havels /Legrand L&T.

Submain wiring with two single core 4 Sqmm PVC FR insulated and unsheathed 1100 volts grade stranded copper conductor ISI Marked drawn into & including medium grade PVC conduit /casing capping, with wooden/white color casing capping (as specified and directed) 25 mm dia with all fittings and accessories and continuous run of one single core PVC FR insulated unsheathed flexible copper conductor cable green colour of size 2.5 Sqmm as earth lead in & including PVC casing and capping/ conduit (not less than 25 mm outer dia) with all fittings and accessories fixed concealed/surface including taking down old unserviceable sub main wiring and making good surfaces to match with existing specification all as required at site complete all as specified and directed by Engr-in- charge. Make of cable - Havells/Plaza/Policab and Make of Casing capping - Polyplast/Pressfit/Presto plast

Submain wiring with two single core 2.5 Sqmm PVC FR insulated and unsheathed 1100 volts grade stranded copper conductor ISI Marked drawn into & including medium grade PVC conduit /casing capping, with wooden/white color casing capping (as specified and directed) 20 mm dia with all fittings and accessories and continuous run of one single core PVC FR insulated unsheathed flexible copper conductor cable green colour of size 1.5 Sqmm as earth lead in & including PVC casing and capping/ conduit (not less than 20 mm outer dia) with all fittings and accessories fixed concealed/surface including taking down old unserviceable sub main wiring and making good surfaces to match with existing specification all as required at site complete all as specified and directed by Engr-in- charge. Make of cable - Havells/Plaza/Policab and Make of Casing capping - Polyplast/Pressfit/Presto plast

Taking down existing sub main wiring aluminium/copper 2/4/6/10 Sqmm.

Taking down unserviceable FLT and LED, 20 Watts, 4ft fittings complete with all accessories for mounting light fittings complete including replacement of old unserviceable ceiling rose with earth terminal connection, 3 terminal/PVC/polycarbonate, isolated body. Make of light fitting- Phillips/C&S/Wipro. Make of ceiling rose: Leader/Cona/Anchor.

LED Bulk Head including lamp, 10 Watts IP55 in engineering plastic housing with clear prismatic difuser inciuding celing rose with earth terminal connecction, 3 terminal/PVC/ polycarbonate, isolated body including taking out old unserviceable FTL/ Bulk head fittings. Make of light fitting - C&S Model No. CG80IBWLED or equivalent in phillips/ wipro

Supply and fixing LED lamp energy saving 9W LED lamp 6500 K Make Suriya or equivalent in Crompton greaves, Bajaj

Earthing complete with galvanized steel earth plate electrode 60cmx 60cmx6mm thick buried directly in ground (earth pit not less than 2.25m deep below normal ground level) with top edge of the plate not less than 1.5m below normal ground level, connected to galvanized iron wire 4.0mm dia by means of bolts, nuts and washers of galvanized iron or steel, protected by GI light grade pipe 15mm bore including GI light grade water pipe 20mm dia with funnel all as shown in electric plate No. 03 of 2009 SSR Pt-I and testing on complete including earth work in any type of soil, PCC 1:2:4 type B-0 as in earth pit and cover 40mm thick reinforced with XPM (weight not less than 4.0Kg/Sqm) and frame of angle iron 25x25x3mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, common salt, charcoal and testing on completion, all as specified and directed.

1100 volts grade heavy duty cable PVC insulated stranded aluminium conductor served with inner sheathings suspended by insulating hangers not more than one meater apart including 4mm suspension wire one twin core cable plate or circular of size 10 sqmm 3 core including taking down old services cable and removing from the site complete all as specified and directed.

M/S Sofi Brothers

M/S MANZOORAHMAD LONE

POPULARHARDWARESTORE

patriotic builders

M/S BEE AAY CONSTRUCTIONS

Bidder Name

patriotic builders

M/S Sofi Brothers

POPULARHARDWARESTORE

M/S MANZOORAHMAD LONE

M/S BEE AAY CONSTRUCTIONS

M/S BIG STRUCT CONSTRUCTIONS