HIDCO/AGM(E)IVRP/NIT34/24-25

Amount

Parking Zone

Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand, as per Architect required.

Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete .(i) Tor steel/Mild Steel I. SAIL/ TATA/RINL

Main Gate & Boundary wall

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface](i) With 1:6 cement mortar (b) 20 mm thick plaster.

Rendering the surface of the ceiling with white cement based wall putty of approved make and brand (1.5mm thick), complete.

Protective and Decorative Acrylic exterior emulsion paint of approved quality over Acrylic primer, as per manufacturer's specification and as per direction of E\C to be applied over acrylic primer as required.

Providing & fixing of Decorative Ms Main gate made out of MS structure over 1.5 mm thick Ms CNC machine cut decorative jali with necessary hardware. Complete structure finished with powder coated, As per Architect required. Size 2400 mm x 1800 mm

Kitchen Guard wall

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete .(i) Tor steel/Mild Steel I. SAIL/ TATA/RINL

Supplying and laying of praver block in floor with fine sand along with necessary work, as per Architect required.

Providing & fixing of Ms Wall partition in kitchen site made out of MS structure over both side Tata Rizon Ms Sheet with necessary hardware, As per Architect required.

Facia cum MS decorative divider

Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.

Ordinary Cement concrete (mix 1:1.5:3) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes.

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete .(i) Tor steel/Mild Steel I. SAIL/ TATA/RINL

Providing & fixing of Decorative Ms wall partition made out of MS structure over 1.5 mm thick Ms CNC machine cut decorative jali with necessary hardware. Complete structure finished with powder coated, As per Architect required.

Electricals Work

Supply and installation of Bolard light

Dismantling work

Dismantling of Electric lamp post, MS gate, tubewel, boundary wall ,plaster ,civil foundatition and removing rubbish as near location.

Signage work

Providing and fixing of CNC Machine cut zafri design with building name signage.

Design,supplying and installation of signage

Add Cess @1% as Applicable over total amount Sl No.1 to 29

Add GST @18% as Applicable over total amount Sl No.1 to 29

G. B. CONSTRUCTION AND CO.

Lalchand Furniture