Construction of Executive Engineers Office, Water Resources Department at New Peren HQ

Amount

Site Levelling

Clearing and Grubbing Road Land .(Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness). In area of light jungle

Earthwork in excavation by mechanical means (hydraulic excavator / manual means over areas (exceeding 30cm in depth, 1.50 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.50m. All kind of soil

Construction of E.E Office Building: Earthwork in excavation by mechanical means (hydraulic excavator / manual means over areas (exceeding 30cm in depth, 1.50 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.50m. All kind of soil

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) at plinth level with: cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and laying in position cement concrete of specified grade propotion (1:3:6) excluding the cost of centering and shuttering- All work upto plint level

Centering and shuttering including strutting and propping & removal of form for suspended floors, roofs, landings,balconies and acess platform

Providing and laying in position specified grade of Re-inforced cement concrete work in walls in 1:1.5:3 excluding the cost of centering & shuttering finishing & re-inforcement- All upto plinth level

Steel Re-inforcement for RCC work I/c straightening, cutting, bending & binding placing in position and binding all complete ( Hot rolled deformed bar "Tor") above plinth level

Filling available excavated earth in trenches(excluding rock), plinth, side of Foundation etc. in lasyers not exceeding 20cm in depth: consolidation each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

Brick work with common burnt clay FPS(non modular) brick of class designation 75 in fdn & plinth in Cement Mortar 1:4

Haft Brick mansonry with common burnt clay FPS(non modular) brick of class designation 75 in fdn & plinth in Cement Mortar 1:4

Providing Wood work in frames of doors & window, clerestory windows and other frames fixed in position with hold fast lugs or with dash fastener of required dia and length ( seasoned & chemically treated wood).

Providing & fixing pannelled or panelled and Glazed shutters for Doors & windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid separately, all complete as per direction of Engineer-in-Charge (Butt hinges and necessary screws to be paid seperately). 35 mm thick shutter

Providing. 40 X 5 mm flat iron hold fast 40 cm long i/c fixing to frame with 10mm dia bolts & nuts and wooden plugs and embedded in Cement Concrete block 30X10X15Cm 1:3:6 mix

Steel work welded in framed work including cutting, hoisting, fixing in position. 12 X 12 mm MS square bar.

Providing & fixing in position collapsible steel shutters with vertical channel 20 x 10 x 2 mm and braced with flat iron diaggonals 20 x 5 mm size with top and bottom rail of T bar iron 40 x 6 mm with 40 mm dia. Complete with bolts, nuts locking arrangements i/c applying a priming coat of approved steel primer.

Providing & fixing Stainless steel (Grade 304) railing made of hollowed tubes, channels, plates, etc i/c welding, grinding, buffing, polishing & making etc. complete.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) at plinth level with:

Cement concrete flooring 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc. complete.

Chequered precast cement concrete tiles 22mm thick in footpath and courtyard jointed with neat cement slurry mixed with pigment to match the shades etc. Medium shade pigment with 50% white cement and 50% ordinary cement

Finishing with 12 mm cement plaster of mix in cement mortar 1:4

Marble stone flooring with 18mm thick marble stone over 20mm base of cement mortar 1:4, (1 cement: 4 coarse sand) laid and jointed with grey cement slurry including rubbing and polishing complete.

Provididng and laying polished Granite Stone flooring in required design and patterns, in linear as well as curvilinear portions of the building, all complete as per the architectural drawings, with 18 mm thick stone slab over 20 mm average thick base of cement mortar (1:4), etc. complete.

Providing and fixing first quality ceramic glazed tiles to IS:13753 of minimum thickness 5mm of approved make in all colours over 12mm thick bed of cement mortar 1:3 etc.

Providing & laying pressed clay tiles (as per approved pattern 20 mm nominal thickness of approved size) on roof joint with cement mortar 1 : 4 , mixed with 2% of integral water proofing compound laid over a bed 20 mm thick cement mortar 1:4 and finished neat.

Providing and applying plaster of approved cement putty of average 1mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of cement primer of approved brand and manufacture on wall surface (Cement primer)

Finishing walls with textured exterior paint of required shade (New work 2 or more coats applied 3.28 Ltr/sqm over and including base coat of water proofing cement paint Snowcem Plus or equivalent applied @ 2.20kg/10sqm.

Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work.

Applying priming coat with ready mixed red oxide zinc chtomate primer of approved brand and manufacture on steel galvanised iron/ steel work

Painting with sythetic enamel paint of approved brand and manufacture of required colour to give an even shade: two or more coats on new work over an under coat of suitable shade with ordinary paints of approved brand and manufacturer

Providing and fixing ISI: 12817 marked Stainless Steel Butt hinges with SS screws etc..

Providing and fixing Brass Tower Bolts with screws etc..

Providing and fixing Alluminium sliding bolts with necessary screws etc...

Providing and fixing Alluminium handles ISI marked with necessary screws, 125 mm etc...

Providing and fixing Alluminium hanging door stopper ISI marked with necessary screws etc...

Providing and fixing IS: 3564 Aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc.

SEPTIC TANK AND SOAK PIT. Earthwork in excavation by mechanical means (hydraulic excavator / manual means over areas (exceeding 30cm in depth, 1.50 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth, lead upto 50m and lift upto 1.50m. All kind of soil

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) at plinth level with: cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering

Centering and shuttering including strutting and propping & removal of form for suspended floors, roofs, landings,balconies and acess platform

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centring, shuttering, finishing and reinforcement - All work upto plinth level

Reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete .

Brick work with common burnt clay FPS(non modular) brick of class designation 75 in fdn & plinth in Cement Mortar 1:4

Haft Brick mansonry with common burnt clay FPS(non modular) brick of class designation 75 in fdn & plinth in Cement Mortar 1:4

Finishing with 12 mm cement plaster of mix in cement mortar 1:4

Supplying and fixing C.I. cover without frame for manholes, 455 x610 mm rectangular C.I. cover (light duty) the weight of the cover to be not less than 23 kg.

SANITARY INSTALLATION. Providing and fixing water closet squatting pan ( Indian type W.C. pan ) with 100mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever) conforming to IS: 7231, Parryware/ Hindware/ Seabird/ Orient (Coral) with all fittings and fixtures complete including cutting and making good, White Vitreous china Orissa pattern W.C Pan of size 585*480mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type) with seat and lid, 10 litre low level flushing cistern with fittings & C.I./M.S. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete including painting of fittings and brackets, cutting and making good the walls and floors wherever required, W.C. pan with ISI marked Black solid plastic seat and lid with whitevitreous china flushing cistern & C.P. flush bend

Providing and fixing white vitreous china flat back or wall corner type lipped front urinal basin of 430x260x350mm and 340x410x265mm sizes respectively with automatic flushing cistern with standard flush pipe and C.P. brass spreaders with brass unions and G.I clamps complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever required, Range of four urinal basins with 10 litre white P.V.C. automatic flushing cistern Parryware/Hindware/Seabird/Orient (Coral)

Providing and fixing wash basin with C.I./M.S. brackets, 15 mm C.P. brass pillar taps, Kingston/Gem[Techno/Parko, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require, Angle back wash basin size 600x480 mm with single 15 mm C.P.brass

Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 32 mm dia

Providing and fixing 100mm sand cast Iron grating for gully, floor or Nahani trap.

Providing and fixing mirror thickness of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, rectangular shape 1500x450 mm

Providing and fixing toilet paper folder

Providing and fixing PTMT liquid soap container 109mm wide, 125mm high and 112mm distance from wall of standard shape with bracket of the same materials with snap fittings of approved quality colour and make, weighing not less thant 105gms (Prayag or equivalent).

Providng and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fitting arangement of approved quality colour and make (Prayag or equivalent). 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less thant 190gms.

PVC PIPES & FITTINGS, Providing and fixing soil, waste and vent PVC pipes 100 mm dia.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fitting including fixing the pipe with clamps at 1.00 m spacing, etc complete. For 25 mm dia

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain and brass threaded fitting including fixing the pipe with clamps at 1.00 m spacing, etc complete. For 15 mm dia

Providing and fixing U Polyvinyl Chloride (UPVC) pipe components Apollo manufactured ISI approved, having thermal stability for hot & cold water supply, including all CPVC plain elbow, brush elbow, joints, etc.complete as per existing market rate.

Brush Elbow 20 mm dia. Apollo

Tee - Joint 20 mm dia. Apollo

Plain Elbow 20 mm dia. Apollo

Union 20 mm dia. Apollo

Socket 20 mm dia. Apollo

Cross Bend 110 mm dia. Apollo

Overhead Storage Nipco Syntax 1000 liters

Additional Labour Charge as per current market price for fitting and fixing of PVC 100mm / 25 mm / 20 mm size down take outlet with SWR PVC 45˚ bend, 87˚ 5' bend, coupler, pipe clip, joints, etc. complete in Peren District

BRASS FITTINGS Providing and fixing ball valve (brass) of approved quality High or low pressure with plastic floats, 25 mm nominal bore

Providing and fixing gun metal non- return valve of approved quality (screwed end ) 25 mm

Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 15 mm

CONSTRUCTION OF RAIN WATER COLLECTION SYSTEM: 110 mm size prince SWR PVC down take outlet pipe 10 ft lengt single socketed for 13.70 m

110mm size Prince PVC elbow

110mm size Prince PVC elbow 45˚

110mm size Prince SWR PVC Pipe clip

PVC Pidilite solvent

Labour Charge for fitting and fixing of SWR 'O' Ring PVC 110mm size down take outlet with SWR PVC 45˚ bend, 87˚ 5' bend, coupler, pipe clip etc. complete.

UNDERGROUND STORAGE TANK, Earth Work in excavation in foundation trenches or drains i/c dressing of sides and ramming of bottoms lift up to 1.5m, including getting out the excavated soil and diposal of surplus soil as directed, within a lead of 50m.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) at plinth level with: cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and laying in position cement concrete in proportion 1:3:6 (1-cement, 3-coarse sand, 6-stone chips of 40mm and down gauge), including necessary curing etc. complete. (excluding cost of centering and shuttering)- All work upto plinth

Steel Re-inforcement for RCC work I/c straightening, cutting, bending & binding placing in position and binding all complete ( Hot rolled deformed bar "Tor") above plinth level

Centering and shuttering including strutting and propping & removal of form for walls (any thickness) including attached plasters, butteresses, plinth and string courses etc.

Providing and laying in position specified grade of Re-inforced cement concrete work in proportion of 1:2:4 (1-cement, 2-coarse sand, 3 graded stone aggregate) excluding the cost of centering & shuttering finishing & re-inforcement- All upto plinth level

Finishing with 12 mm cement plaster of mix in cement mortar 1:4

Filling available excavated earth in trenches(excluding rock), plinth, side of Foundation etc. in lasyers not exceeding 20cm in depth: consolidation each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m

FILTRATION CHAMBER. Earthwork in excavation in foundation trenches or drain (not ex eeding 1.5 m in width or 10 sqm on plan) including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soils and disposal of surplus excavated soil as directed, within a lead of 50 m.

Random rubble masonry with hard stone in foundation and plinth including levelling up with cement concrete 1:6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) at plinth level with: cement mortar 1:6 (1 cement: 6 coarse sand)

Providing and laying cement concrete in proportion 1:3:6 (1-cement, 3-coarse sand, 6-stone chips of 40mm and down gauge), including necessary curing etc. complete. (excluding cost of centering and shuttering).

Steel Re-inforcement for RCC work I/c straightening, cutting, bending & binding placing in position and binding all complete ( Hot rolled deformed bar "Tor") above plinth level

Centering and shuttering including strutting, propping etc. and removal of form for wall(any thickness) including attached pilasters, butteresses, plinth and string course etc

Providing and laying in position specified grade of Re-inforced cement concrete work in proportion of 1:2:4 (1-cement, 2-coarse sand, 3 graded stone aggregate) excluding the cost of centering & shuttering finishing & re-inforcement- All upto plinth level

Finishing with 12 mm cement plaster of mix in cement mortar 1:4

Providing and fixing G.I Pipe 25 mm Φ complete with G.I fittings including trenching and refilling etc. (external work)

Providing and fixing Brass Stop cock of 20 mm Φ

PLUMBING & SANITARY FITTINGS. 110 mm size Prince SWR Pipe

110 mm size prince PVC Elbow

110 mm size Prince PVC 45°

110 mm size Prince SWR PVC Pipe clip

PVC Pidilite solvent

Labour charge for fitting and fixing of SWR "O" PVC 110 mm size down take outlet with SWR PVC 45° bend 87° 5' bend coupler pipe clip etc. complete

PLUMBING & SANITARY FITTINGS. Brush elbow UPVC 20 mm dia Apollo

Tee-Joint 20 mm dia Apollo

Plain Elbow 20 mm dia Apollo

Union 20 mm dia Apollo

Socket 20 mm dia Apollo

Cross Bend 110 mm dia Apollo

Nipco syntax 1000 litres

Labour charge for fitting and fixing of PVC 110 mm/ 25MM/ 20 MM size down take outlet with SWR PVC 45° bend 87° 5' bend coupler pipe clip etc. complete in Peren District

M/s.Neisakholie Rupreo and Co. (BID ID -3191)

M/S UNITED BUILDERS (BID ID -3194)