CWE(S)/NORTH/TOKEN/24 OF 2023-2024

Amount

Surface dressing not exc 15 cm deep in hard / dense soil and getting out complete all as specified and as directed.

Rough excavation not exceeding 1.5 m deep and getting out hard / dense soil complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm in soft / loose soil complete all as specified and as directed.

Supply and filling murram / red bajri filling in floors orpavings, laid in layers n exc. 15 cmthick, spread, levelled and rammedincluding watering leveling, watering and well ramming in layers not exc 25 cm complete all as specified and as directed.

Removing excavated soil to a distance not exc 50m and deposting where directed complete all as specified and as directed.

Rolling and consolidation formation surface in cutting and dressing by using power roller 8 to 10 Tonne complete all as specified and as directed.

M&L for 150mm thick Soling (or sub base) with broken boulders or quarried stone, inter stices filled, surface formed and rolled and consolidated to required gradient and complete all as specified and as directed.

M&L 15cm thick ( two layers of 7.50 x2=15 cm ) (compacted thickness) WBM, with coarse aggregates of grading 2 (63 to 40mmsize) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to gradient and camber required complete all as specified and as directed.

M&L Premix bituminous, paving bitumen any penetration laid/rolled macadam with binder content of 4% by weight of total mix using paving bitumen (VG-30)and compacted to required gradient and camber (consolidated thickness 75mm or less) complete all as specified and as directed.

M&L for preparing WBM top surfaces by brushing with wire brushes for removing caked mud etc sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer at 10 kg per 10 sqm using paving bitumen VG-30 grade complete all as specified and directed.

M&L for bituminous premixed semi dense asphaltic concrete consolidated thickness 40 mm with 5.5 % binder content by weight of total mix using paving bitumen VG -30 grade, mixed in hot mix plant, rolled and compacted to required camber and gradient etc, with mechanical paver and rolled with 8 to 12 Tonne power roller and all as specified and directed.

Excavation over areas, n exc 1.5 m deep and getting out in any type of soil complete all as specified and as directed.

Excavation over areas, exc 1.5 m and not exc 3.0 m deep and getting out in any type of soil complete all as specified and as directed.

M&L form work for fair finished surfaces of concrete to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter complete all as specified and directed.

M&L cement concrete 1:4:8 Type D2 (40mm graded Stone aggregate) as in foundation filling and mass concrete complete all as specified and as directed.

M&L 75 mm thick plain cement concrete 1:4:8 Type D2 (40mm graded Stone aggregate) as in sub base to floors, omplete all as specified and as directed.

M&L RCC M-25 design mix using 20mm graded aggregate as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all as specified and directed.

M&L RCC M-25 design mix using 20mm graded aggregate in Walls, retaining walls, basement walls, ballast walls and the like; any thickness; above top of footings; including attached pilasters and buttresses complete all as specified and directed.

M&L RCC M-25 design mix using 20mm graded aggregate as in slabs supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and directed.

M&L for Mild steel bars (TMT bars) 08mm dia and over cut to length, bent to shape required including cranking bending, spirally for hoping for columns, hooking ends and binding with and including mild steel wire not less than 0.9 mm dia, complete all as specified and directed.

All as per Item No 18 above but 6 mm to 8mm dia as in stirrups complete all as specified and as directed.

M&L form work for fair finished surfaces of concrete to sides of formwork to faces of walls, retaining walls, abutments, parapets and staircase railings and Similar work including attached pillasters, buttresses, etc.; vertical or to batter complete all as specified and as directed.

M&L form work for fair finished surfaces of concrete to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

M&L for brick work with fly ash bricks straight or curved on plan exc 6.0m mean radius built in cement mortar 1:6 complete all as specified and as directed.

M & L for preparing newly plastered wall surfaces and applying three coats of white wash complete all as specified and as directed.

Excavating in trenches n exc 1.50 m wide and n exc 1.5 m in depth for foundation and getting out in any type of soil complete all as specified and as directed.

M&L Brickwork with flyash bricks, straight or curved on plan to any radius in half brick thick walls, built in CM (1:4) complete all as specified and as directed.

M & L 15 mm thick rendering in CM (1:4) on any faces of brick work or concrete surfaces and finished even and smooth without using extra cement complete all as specified and as directed.

Material & Labour for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces over 3mm thick wall care putty complete all as specified and as directed.

M&L for preparation of new concrete / brick surfaces and applying two coats of Synhteic enamel paint over a coat of priming paint plaster coat, any description over 10cm girth or width not otherwise described, complete all as specified and as directed.

Supply and laying 100mm dia tubes, medium grade', galvanised, with all fitting; laid in trenches complete all as specified and as directed.

S & F road cat eyes of approved make pasted with the adhesive as per manufacturer instructions. Make: 3 M of series 290 C or equivalent in Mr. Illumination/ Dark eye / Aktion complete all as specified and as directed.

S&F solar road pavement markers ( solar stud) AK 970 of Aktion make or an equivalent in 3M / Mr. Illumination fixed on bituminous/ concrete surfaces as per manufacturer instructions complete all as specified and as directed.

M & L for painting lines, dashes, arrows, letters etc on road surfaces / over speed breakers exc 10 cm wide, with thermoplastic road marking paint, spray machine, preparing black top surface including fanning out dust and any other foreign matter complete all as specified and directed.

Fixing only plastic / aluminium road studs 10cm x 10cm x 2cm on existing road including roughning of existing surfaces and fixing as per manufacturer's instructions using necessary chemical adhesive, nails etc all as specified and directed (Note : Road studs only will be issued by department as free for fixing)

Fixing only solar road studs including cutting holes, grouting the studs in the existing road surface and fixing as per manufacturer's instructions using necessary chemical adhesive etc all as specified and ditected. (Note : Solar road studs only will be issued by department as free for fixing)

Fixing only Convex Mirrior of any size alongwith MS Post with necessary excavation for one No of post holes, PCC bed block 1:2:4 type B1 of size 450 X 450 x600 mm, removal of surplus soil and levelling of distrubed ground complete all specified and directed (Note : Convex mirror and MS post only will be issued by department as free for fixing)

Fixing only Road junction / information sign board of any size, with necessary excavation for one No of post holes, PCC bed block 1:2:4 type B1 of size 450 X 450 x 600 mm, removal of surplus soil and levelling of distrubed ground complete all specified and directed (Note : Road sign boards only will be issued by department as free for fixing)

Fixing only solar road delinator / deliginator/ solar flashers/ solar light /warning light poles on metal pipe including grouting the pipe in existing road / foot path including cutting holes and fitting with PCC 1:2:4, type B1 of size 300x300x450mm removal of surplus soil and levelling of distrubed ground all as specified and directed (Note : Solar road delinator / deliginator/ solar flashers/ solar light /warning light poles only will be issued by department as free for fixing)

S&F in repairs ABS round body fitted with 2 Nos of 110mm dia highly reflective reflector made out of PMMA and having a pipe, (duly powder coated) . Sponser plate can be provided for sponsership. Two small rectangular reflector of size 70x23mm, 2 Nos each side are also provided for better reflecting including necessary excavation of size (300x300x450mm) and fixed with PCC (1:3:6) Type C1 complete all as specified and directed.

Preparation of old concrete/bituminous surfaces and applying two coats of radium paint of colour as approved by GE of any description over 10cm girth or width not otherwise described, complete all as specified.

S & F in repairs Convex Mirrior of 1000 mm Dia made of poly carbonate material fix to 100 mm dia MS Post 50mm nominal bore and of wall thickness 3.65mm conforming to IS-1161-1979 of grade St-240 of 3.0 metre long including two coats of epoxy paint, necessary earth work and excavation in post holes and PCC bed block 1:2:4 type B1 of size 450 X 450 x 600 mm,including removal of surplus soil and levelling of distrubed ground complete all specified and directed

M & L for Brickwork with sub class ‘B’ bricks in one brick thick honey comb walling, built in CM 1:3 complete all as specified and directed.

M&L RCC M-25 design mix using 20mm graded aggregate in beams, cantilevers, bressummers, lintels over 1.5m span upto a height of 8.00m from ground level complete all as specified and directed

M&L RCC M-25 design mix using 20mm graded aggregate columns upto a height of 8.00m from ground level complete all as specified and directed

M&L RCC M-25 design mix using 20mm graded aggregate as in chajjas supported on walls, beams and columns in floor, roofs, landings, balconies, canopies, deck slabs upto a height of 8.00m from ground level complete all as specified and directed

M&L form work for fair finished surfaces of sides of pillars, posts, struts, piers, columns and stanchions complete all as specified and directed.

M&L for formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including sup- ports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and directed.

M&L for 18 to 20 mm thick Granite any shade as approved by GE machine cut machine polished work in steps, jambs, pillars, window- cills, cooking platforms, basin top and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite in single piece, (cut to size in rectangular/square shape) including necessary grouting and fixing with wall for table top basin fixing complete all as specified.

M & L Dholpur stone with hammer dressed facework (with maximum depression from a straight edge held against the dressed surface not exc 20mm), size as approved by GE about 40mm high, 75mm deep in straight courses, laid and jointed in cement and stone dust mortar 1:3, recess pointed (10mm x 20mm) with an admixture of white cement and Dholpur stone dust 1:1 as in vertical surfaces etc. upto a height of 8 mtr from GL to match over & incl 10mm thick rendering in CM 1:4 complete all as specified and as directed

M&L glazed ceramic coloured tiles 350x250x6-7 mm/450x350x6-7mm/ 600x300x9-10mm thick on vertical surfaces, etc. set and jointed in neat cement slurry/paste and pointed to match the surfaces over and incl 10 mm thick plaster in CM 1:4, complete all as specified

M&L for clay terracota wall tile on vertical surfaces, etc of any size as direted by GE, set and jointed in neat cement slurry/paste and pointed to match the surfaces over and incl 10 mm thick plaster in CM 1:4, upto a height of 7.00m from ground levelcomplete all as specified

M&L for decorative Mangalore tiles, white house roof design style of red colour of any size as directed by GE fixed with necessary adhesive complete all as specified and directed.

M&L for decorative Mangalore ridge tiles,white house roof design style of red colour of any size as direted by GE, fixed with necessary adhesive complete all as specified and directed.

M & L 600x600 vitrified Ceramic tiles(light shade) 9-10 mm thick polished in floors, etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

M & L vitrified ceramic tiles (light shade) 9-10 mm thick polished (square/ rectangular) on vertical surfaces as in skirting etc. set and jointed in neat cement slurry/paste and pointed in white or coloured cement to match over and including 10mm thick plaster in CM 1:6

S&F 125 x 60 mm pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete as specified, supplied and fixed.

S & F 35 mm 2nd class hard wood factory made glazed and skelton shutters, open rebated and prepared to receive glass, gauge etc (without sash bars) edge of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Part-I section 8 clause 8.24(a) etc completed all as specified and directed.

S&F 35mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

S&F 150mm aluminium anodised barrel tower bolts of extruded section and fixed complete all as specified and directed.

S&F 150 mm extruded aluminium alloy handles, fabricated type, anodised complete all as specified and directed.

S&F 300 Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

Supply and fix steel windows (fly proof and glazed shutter) made with galvanised steel colour coated/ powder coated ( Base steel as per IS 513 'D', galvanised as per IS 277 with zinc of 120gm/sqm) with total coating thickness of 0.60mm. ( outside for glazing and inside gauged shutter) Sections for frame should be of 72mmx55mm, section for mullian should be 72mm x 50mm section for shutter frame should be 47mmx 20mm,and section for fixing glass bead should be 12mm x 12mm and section for fly mesh shutter frame should be 40mm x 20mm mesh fixing should be of 18mm x 0.6mm. Stainless steel wire mesh of 0.45mm dia and ave width of aperture 1.4mm shall be used for fly proofing . 4mm thick plain sheet glass to be used for glazing of glazed shutters including 10mm powder coated square saftey grills, locking arrangement and all necessery accessories etc, completed all as specified and directed. Make NCL Altech / Elixir

M & L applying new wood surface two coats of synthetic enamel paint over a coat of prink primer on wood or wood based material over 10 cm width or girth including preparation of new wood surface complete all as specified and directed.

Preparation of new steel & iron surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint of approved tint, quality, colour on these surfaces over a coat of red oxide, complete all as specified

Material and labour for rendering 15 mm thick on than fair faces of brick work or concrete surfaces in cement mortar 1:6 finished even and smooth without using extra cement complete all as specified and as directed

Material and labour for rendering 15 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed

M & L for preparing newly plasterd wall surfaces of walls and applying two coats of distemper oil emulsion over 3 mm thick wall care putty and a coat of primer etc complete all as specified and as directed.

M&L Hard core of broken stone or boulders of gauge not exceeding 63mm deposited, spread and levelled in layers not exceeding 15cm thick, watered and rolling with power roller exc. 8 tonne & n.exc. 12 tonne to a true surface complete all as specified and directed.

M&L for Machine pressed precast concrete interlocking paver block with grey cement and pigment (glossy finish) any shape & size conforming to IS 15658-2006 of 80 mm thickness, M-40 grade etc complete all as specified and as directed.

Spreading and levelling of grit cushioning below interlocking tiles.

M&L for pre cast Machine pressed cement concrete 1:2:4 type B-0 (using 12.50mm graded stone aggregate) as in kerbs stones and fixing all as per manufacturer instructions etc size shall be decided and directed by GE

Demolition of brickwork or stone/boulder masonry / Block masonry, built in cement mortar including facing, dressed stone work and precast concrete all quoins, arches, pillars, coping etc but excluding ashlars articles complete all as specified and as directed.

S&F for Framed work as in doors and gates of angle or other section with gusset plates, rails, braces, etc, complete, drilled for fixing of steel sheeting or other covering. Doors, etc to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing conforming to Fe-410 or Fe-310 complete all as specified and as directed.

S&F for decorative knobs for fixing of gates any size, etc., complete all as specified and as directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc .complete all as specified and as directed.

S&F in repairs Road junction / information sign board, (4 feet x 2 feet) prepared on both side 3 mm thick ACP sheet fixed on SS framework of square tube (25x25mm) and thickness not less than 2mm as per manufacturers instruction including reflective sheet HIP (3M or equivalent Make with 3 year warranty certificate), border/ letters/ numerals and arrow, coated with non pealable crystal clear protective transparent coat retaining 100% reflection. The framework shall be welded on 2 Nos vertical post of 50 mm dia and thickness not less than 3mm thick mirror polished SS pipe of 304 grade welded with holdfast 2 Nos of flat Iron (40x6 mm) 150 mm long . Height of board shall be 2.55 m above GL and 0.45 m below GL and including necessary excavation of size in 0.60 x 0.60 x 0.60m size and PCC 1:3:6 type C2 foundation (Spec. IRC 67) complete all as specified and directed.

K CHANDRAPAL REDDY

M/S B.SHRAVAN KUMAR

BNS INFRA AND DESIGN