REPAIR/POLISHING/RECANNING OF WOODEN FURNITURE ITEMS UNDER GE DIPATOLI

Amount

Chair Dining FD-1105/279 S&F new components of 1st class Hard teak wood including dismantling unservicable one complete all as specified and as directed. (a) Rear leg

(b) Front leg complete all as specified and as directed.

(c) Rear/front/side rail complete all as specified and as directed.

(d) Stiffener complete all as specified and as directed.

(e) Back rest complete all as specified and as directed.

(f) Tightening of all parts/joints of whole chair dining complete all as specified and as directed.

(g) S & F recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.

(h) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs after removing old buffers all as specified and directed.

Chair Easy FD-1108/229 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Rear leg

(b) Front leg complete all as specified and as directed.

(c) Arms complete all as specified and as directed.

(d) Front/back/Side rail of seat as to match with the existing, made of shisham wood all as specified and directed

(e) Tightening of all parts/joints of whole chair easy complete all as specified and as directed.

(f) S & F recanning seat & back in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.

(g) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing with french polish with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified & directed.

Chair writing FD-202/ 250/280 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Rear leg

(b) Front leg complete all as specified and as directed.

(c) Rear/front/Side rail complete all as specified and as directed.

(d) Arms complete all as specified and as directed.

(e) Back rest complete all as specified and as directed.

(f) Stiffener complete all as specified and as directed.

(g) Tightening of all parts/joints of whole chair dining complete all as specified and as directed.

(h) S & F recanning seat & back of the chair and recanning in 'Godrej' pattern with 2mm wide & 0.6mm thick for centre portion and 4mm wide plastic cane for borders including dismantling unserviceable one all as specified and as directed.

(i) Preparation of sufaces by throughly rubbing with emery paper, applying raw/burnt seina uniformly and polishing with french polish with french polish to obtain a glossy finish including fixing 4 Nos nylon buffers at the bottom of the chairs all as specified and directed.

Bed plywood top FD-245 & 246 S&F new components comprising of following outer member made of shisham wood and internal frame made of cheer wood, covered both sides of board with 3.5 mm thick OST plywood with 12mm thick half cut teak wood beading including dismantling unservicable one all as specified and as directed. (a) Head board

(b) Foot board complete all as specified and as directed.

(c ) S & F new teak plywood of head board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one all as specified and as directed.

(d ) S & F new teak plywood of foot board on both sides along with 30mm x 6mm teakwood beading on top including dismantling unserviceable one all as specified and as directed.

(e )S&F new components of 1st class Hard teak wood) including dismantling unservicable one all as specified and as directed. (a) Long rail of size 90 x 35 mm

(f) Stiffner of size 60 x 40 mm complete all as specified and as directed.

(g) Wooden bracket (corner) complete all as specified and as directed.

(h) S&F top made of 12mm BWR phenol bonded commercial plywood with suitable screws including dismantling unservicable one all as specified and as directed.

(j) preparation of the surfaces by throughly rubbing with emery paper both surfaces of the head board, foot board including legs and long rails and polishing with french polish two coats to obtain a glossy finish complete all as specified and as directed.

Table dining for 08 persons FD-30(M)/ 273 & 239 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front) complete all as specified and as directed.

(c) Top rail (short/side) complete all as specified and as directed.

(d) wooden bracket size 100x100mm (corner) complete all as specified and as directed.

(e) Top 18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table dining for 06 persons FD-30(M)/ 273 & 239 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front) complete all as specified and as directed.

(c) Top rail (short/side) complete all as specified and as directed.

(d) wooden bracket size 100x100mm (corner) complete all as specified and as directed.

(e) Top 18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Teapoy FD-382/ 232 & 278 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front) complete all as specified and as directed.

(c) Top rail (short/side) complete all as specified and as directed.

(d) Stiffener complete all as specified and as directed.

(e) Wooden bracket size 50x50mm complete all as specified and as directed.

(f) Top18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(g) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table centre FD-274 & 235 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front) complete all as specified and as directed.

(c) Top rail (short/side) complete all as specified and as directed.

(d) Stiffener complete all as specified and as directed.

(e) Top18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table Peg FD- 277 & 236/384 S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (a) Leg

(b) Top rail (long/front) complete all as specified and as directed.

(c) Top rail (short/side) complete all as specified and as directed.

(d) Stiffener complete all as specified and as directed.

(e) Top18mm thick pre-laminated MDF board alongwith 4mm thick teak wood beading including dismantling unserviceable one all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Table writing FD-249 & 275 (a) Top made out of 18 mm thick pre-laminated MDF board duly providing 4 mm thick teak wood beading all around including dismantling unserviceable one complete all as specified and as directed.

S&F new components of 1st class Hard teak wood including dismantling unservicable one all as specified and as directed. (b) Leg(long)

(c) Leg (short) complete all as specified and as directed.

(d) Side/bottom rail complete all as specified and as directed.

(e) Wooden bracket size 100x100mm complete all as specified and as directed.

(f) Back made out of 6 mm thick plywood commercial including dismantling unserviceable one all as specified and as directed.

(g) Side made out of 18 mm thick Pre-laminated MDF board one side laminated finish including dismantling unserviceable one all as specified and as

(h) Stiffner (long) complete all as specified and as directed.

(j) Drawer made out of 18 mm thick MDF board for front and 12 mm thick for back/side including provision of knob including dismantling unserviceable one all as specified and as directed. Note :- Knob shall be be aluminium anodised (Dark Brown) chromium plated of approved size and quality

(k) Complete cupboard including drawer from the table writing and made of 18 mm thick pre-laminated MDF board including back provided with 6mm thick commercial plywood including dismantling unserviceable one all as specified and as directed. Note :- (a) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (b) Hinges shall be 50 mm of approved quality.

(k) Preparation of surfaces with sand/emery paper and applying french polish two coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Hat Stand (FD-361/362) (a) S & F 4mm thick teak face Ply to make front side along with teak wood edging of size 35mm x6 mm including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.

(b) S & F of Back commercial plywood including dismantling unserviceable one complete all as specified, directed and shown on drawings.

(c) S & F of brass Pegs of size 75mm(W) x 120mm (H) including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.

(d) S & F of 5mm looking mirror with edging including dismantling of old unserviceable one complete all as specified, directed and shown on drawings.

(e) M & L for preparation of surfaces with sand / emery paper and applying french polish one or more coats of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with bee's wax complete along with two key plates all as specified and as directed.

Table Bed side FD/MAP/07 (a) S & F door shutters made of 18mm thick MR Gde plywood pasted with 0.8mm thick sunmica on one side of approved shade duly providing 4mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one all as specified and as directed.

(b) S & F in replacement of drawers with new drawers made of 18mm thick MR Gde Plywood with 0.8mm thick laminated sheet on front side, 12mm thick of sides of drawer including with 6mm thick MR Gde Plywood to bottom of drawers including aluminium anodished knob and all as shown on drg.

(c ) Supply and fixing in replacement of back of table bed side made of 6mm thick plywood MR Gde all as specified and shown on drg.

(c) S & F New top made out of 18mm thick MR Gde plywood pasted with 0.8mm thick sunmica on one side of approved shade duly providing 4mm thick teak wood beading all round including dismantling unserviceable one complete all as specified and as directed.

(d) S & F Telescopic channel (pair) for drawer of Table bed side complete all as specified and as directed.

(e) S & F 100mm CP handle for Table bed side complete all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

Side board FD-372 (a) S & F door shutters (both) made of 18mm thick Pre-laminated MDF board duly providing 6mm thick teak wood beading all round with fittings and fixtures including dismantling unserviceable one all as specified and as directed. Note :- (i) Knob shall be aluminium anodized (dark brown chromium plated of approved size & quality). (ii) Hinges shall be 50 mm of approved quality.

(b) Front portion of the drawer as to match with the existing made out of 18mm thick Pre-laminatedMDF board and knob including dismantling unserviceable one all as specified and as directed.

(c) New top made out of 18mm thick Pre-laminated MDF board duly providing 4mm thick teak wood beading all round including dismantling unserviceable one all as specified and as directed.

(d) S/F 4mm thick one side teak face plywood on sides including dismantling unserviceable one all as specified and as directed.

(e) Back made out of 6mm thick commercial ply wood including dismantling unserviceable one all as specified and as directed.

(f) Preparation of surfaces with sand/emery paper and applying french polish one or more coat of approved quality to achieve uniform smooth texture and high glossy finish after filing holes with beas wax complete all as specified and as directed.

M/S SURYA BUILDERS

Y P ANAND

M/s Mukesh and company

M/S NEHAL ENTERPRISES