C/o veterinary dispensary at Khangteri, Teh.Rohru, Distt. Shimla(HP).

Amount

Cutting in earth work and disposal of excavated earth upto all leads and lifts.

Excavation in foundation, trenches etc. in earth work in all kind of soil lifts. Stacking the excavated soil not more than 3mtrs. Clear from the edge of excavation and then returning the stacked soil in 15cm layers when required into plinths sides of foundation etc. consolidating of all surplus excavated earth as directed within all leads and lifts disposed earth to be levelled neatly dressed.

Providing and laying cement concrete 1:6:12 (1cement:6sand:12graded stone agregate 40mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.

Providing from work with steel plates 3.15mm thick weled with angle iron in frame 30x30x5mm so as to give a fair finish including levelling centering, shuttering strutting and propping etc. With wooden battens and ballies, hight of propping and cenring below supporting floor two ceiling and removal of the same for instu- reinforced concrete and plain concrete work in:-(a) Foundation, footing bases of colums etc. and mass concrete.

b) Columns, pilasrs, post and struts, square, rectangular or polygonal in plain.

c) Flat surfaces such as soffits of suspended floors, roofs, landing of the like floors etc. upto 200mm in thickness.

d) Beams, cantilevers, girders & lintels, sides & soffits or beams, beam haunchings, cantilvers bressumers and lintels not exceeding 1mtrs in depth.

Providing & laying cement concrete work 1:1.5:3 (1cement: 1.5sand: 3graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in all hight.(a) Foundation footing bases of columns etc. and mass concrete.

b) Columns, pilasrs, posts and struts, square, rectangular or polygonal in plain.

c) Suspending floors roofs landing & shelves and their supports, balconies, beams, girders, bressumers and their cases (except spiral cantilever upto floor two level.

Providing tor steel reinforcement for RCC work including bending, binding and placing in postion complete upto floor two level.

Prooviding wood work in frames of doors, windows, clearestory windows and other framed and fixed in postion. 1st. Class hard wood/sal wood.

Prooviding 40 X 3mm flat iron hold fast 40cm. Long including fixing to frame with 10mm dia bolts, nuts and wooden splug and immeging in cement concrete block 10x10x15 cms. 1:3:6 (1cement: 3sand: 6graded stone aggregate 20mm nominal size).

Providing & fixing panelled glazed or panelled and glazed shutters for doors windows and clearstory windows including black enamelled iron butt hinges with necessary screws. 35mm thick 2nd Class Deodar Wood.

Providing and fixing anodized aluminium sliding door bolt anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete. (a) 300mm x 16mm.

Providing and fixing aluminium tower bolts (barrel type ) anodized transparent or dyed to required colour and shade with bolts and nuts screws etc. complete.a)200x10mm.

Providing and fixing aluminium handle anodized transparent or dyed to required colour and shade with nacessry screws etc. complete. (a)125mm.

Brick work using common clay burnt building bricks in superstructure above ground level in cement mortar 1:6 (1cement: 6 sand) 1st class bricks upto all height.

15mm cement plaster in single coat on the rough side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

15mm cement plaster in single coat on the fair side of brick/concrete/stone walls for interior plastring upto floor two level including arrrises, internal rounded angles, chamfers and/or rounded angle not exceeding 80mm in girth and finished evehn and smooth in cement mortar 1:6(1cement :6sand).

Providing and laying spartic ceremic tiles 5.5mm thick in flooring 300x300mm size on treads of steps laid on a bed of 12mm thick cement mortar 1:3(1cement:3sand) finished with flush pointing in white cement.

White glazed tile 6mm thick in skirting risers of steps and dado 12mm tick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry.

P/F 10mm thick anti skid water proof stain & impact resistant heavy duty vetrified tiles Nitco or equivalent 600 x600 x10 mm manufactured of approved shade & clour in flooring, treads of steps & landings laid over 12mm thick cement mortar 1:3 (1cement : 3sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete

Providing & laying duro stone vetrified tiles (300x300mm x 10mm) in grey coloured or of approved shade skirting risers of steps and dado 12mm tick cement mortar 1:3(1cement: 3sand) and jointed with cement slurry with pigment to match the shade of tiles as required complete .

Providing and fixing M.S. grills of required patterns in woodan frames of windows etc. With M.S. flats, square or round bars with round headed bolts and nuts or by screws. Plain grill.

Steel work welded in built, up saction in trusses and framed work including cutting hosting fixed in position & applying a priming coat of red lead paint in :- a)In trusses and trussed purlins.

b) In grating framed guard, bars ladders, railing, brackets and similar works.

Providing and fixing 0.60mm thick prepainted steel sheet in roofing with hot dipped metallic zinc coated sheet with top coat of regular modified polyster (RNP) organic coating of 20 microns over 5 microns primer coating to back coat of polyster of 5 microns over 5microns primer coating i/c fixing with prepainted iron J or L hooks, bolts and nuts 6mm dia mter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing and fixing ridges or hips 60cm over all with 0.60mm thick prepainted steel sheets in roofing with hot dipped metallic zinc coated sheets with top coat of regular modified polyster organic coating of 20 microns over 5 microns primer coating back coat of polyster of 5 microns over 5 microns primer coat ing including fixing with prepainted iron j or L hooks, bolts & nuts 6mm dia & prepainted G.I. limpet and bitumen washers complete with all accessories as required as per the direction of Engineer-in-Charge.

Providing and fixing prelaminated board ceiling complete with all necessary screws and clamps. 8mm thick.

Providing & fixing M.S. BP sheet 1.66mm to 2mm thick in eaves board/ facia/soffits/ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured & paid separately).

Providing and laying cement concrete 1:3:6 (1cement:3sand:16graded stone agregate 20mm nominal size ) and curring complete excluding cost of form work in foundation and plinth.

Providing plinth protection under layer of 75mm thick bed of dry brick/stone aggregate 40mm nominal size well ramed and consolidated and ground with fine sand including prepration of ground finished with 50mm thick cement concrete 1:3:6 (1cement:3sand :6graded stone aggregate 20mm nominal size.) and fixing oxidized M.S hooks and eyes 150mm long.

Applying priming coat over new wood and wood based surface after and including prepairing the surface by thoroughly cleaning oil, dirt and other foreign matters sand papered knotting. Ready mixed pain brushing wood primer pink.

Painting two coat (excluding priming coat) on new wood and wood based surfaces with readymixd paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter sand pepering and stopping with ready mixed paint. (a) White paint.

Applying priming coat over new steel and other matel surfaces after and including prepairing the surface by thoroughly cleaning oil grease, dirt and other foreign matters sand papered knotting Ready mixed pain brushing red oxide/zink oxide chrome.

Painting two coat (excluding priming coat) on new steel and other metal surface under coat with ready mixed paint brushing to give an even shade including cleaning of all dirt, dust and other foresign matter with ready mixed paint otyher than white.

Applying birla white wall care putty over plaster surface after thoroughly brushing the surface free from mortar drops, dust, loose materials and other foreign matters sand papered smooth to give final metter finish to the surface complete.

Distempering (two coats) with oil boud washable disremper of approved brand and manufacture and of required shade on decorated wall surfaces to give an even shade over and including a priming coat with distemper primer of approved brand and menufacture after thoroughly brushing the surface free from mortar dropping and other forign matter and also including preparing the surface even and sand papered smooth priming coat with distemper primer.

Finishing wall with water proofing cement paint Apex of Asian brand and manufacture and of required shade on decorated wall surfaces (two coats) to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials.

Stone soling properly handpacked filling interstices with kharnja stone

Cement concrete flooring 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement 40mm thick.

Providing and laying cement concrete 1:4:8 (1cement:4sand:8graded stone agregate 25mm nominal size) and curring complete excluding cost of form work in foundation and plinth in breast and retaining walls etc.

Stone filling behind protection wall.

Providing & fixing wall ceiling and floor galvanised mild steel tubes (miedum grade) tube fitting and clamps i/c making good the wall, ceiling and floors. (i) 15mm nominal size.

Providing and fixing PVC automatic cistern 10.00 / 12.50 ltrs. capacity complete with all fittings.

Providing & fixing PVC floor trap of self cleaning design with sand cast iron screwed down or hinged grating with or without vent arm complete i/c cost of cutting & making good the walls and floors. 100mm nominal dia.

Providing & fixing 100mm sand cast iron grating for gully, floor or Nahni trap.

Providing & fixing CP brass bib tap with capastan head 15mm dia.

Providing & fixing CP brass stop cocks 15mm dia.

Providing & fixing vitreous china wash basin with single hole for pillar tap with CI or MS brackets painted white including cutting holes and making good the same but excluding fittings flat back 630 x450mm of reputed make.

Providing & fixing C.P. brass waste for wash basin or sink. 32mm dia.

Providing & fiixng PVC waste pipe for wash basin or sink 32mm dia.

Providing & fixing 600 x 450mm bevelled edge mirror of superior glass mounted on 6mm thick AC sheets or plywood sheet and fixed to wooden plugs with CP brass screws and washers of standard quality.

Providing and fixing PVC connection 45cm long 15mm bore.

Providing & fixing C.P. pillar tap with capaston head. 15mm dia.

Providing and fixing brass full way valve with wheel 15mm nominal szie.

Providing and fixing glass shelves complete in all respect.

Providing and fixing towel rail complete with C.P. brass bracket fixed to wooden plugs with C.P. brass 600mm x 20mm.

P/F brass soap dish with C.P. brass brckets fixed to wooden cleats with C.P. brass screws.

Providing and fixing vitreous china wash, down water closet (European type, W.C. pan) with integral `P' or S trap inlcuding jointing the trap with soil pipe in cement mortar 1:1 (1cement:1sand) (Seat and cover to be measured and paid for separately). Anglo Indian (Universal Closet).

Providing and fixing PVC spigot and socket soil, waste and ventilating pipes (lead chaulked joints to be measured and paid for separately) (a)75mm dia

(b)110mm dia

Providing and fixing PVC fittings and accessories with approved adhesive etc (a)Plain bend (i)75 mm nominal dia.

(ii)110mm nominal dia.

(b)Single equal branch of required degree. Plain bend. (i)75mm nominal size.

(ii)110mm nominal dia.

Providing and fixing PVC clamps for sand cast iron pipes (i)75mm dia.

(ii)100mm dia.

Constructing manhole with RCC top slab in 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) foundation concrete 1:4:8 (1cement: 4sand: 8graded stone aggregate 40mm nominal size) inside plastering 15mm thick with cement mortar 1:3 (1cement: 3sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1cement: 2sand: 4graded stone aggregate 20mm nominal size) finished smooth complete including curing complete and testing. Inside size 800 x 800mm and 500mm deep including RCC cover and frame medium duty 500mm internal dia with 200mm thick walls of brick masonary using common burnt clay building bricks in cement mortar 1:3 (1cement: 3sand) complete.

Providing and fixing PVC water storage tank. 1000 ltrs. Capacity with all necessary fittings.

Providing and fixing G.I. or M.I. unions. 15mm dia.

Providing and laying PVC pipes in weep holes. 100mm dia.

Ravi Rawat

SURINDER THAKUR

Deepak Manta

Robin Rakta