PROVN OF 3 X HIGH MAST LED LIGHT WITH 15 MTRS POLE AT MUKUND DRILL SQUARE, RRC FATEHGARH UNDER GE FATEHGARH

Amount

Supply,installation,testing and commissioning of 16 M high mast system with its accessories , Mast shaft shall be in two sections and suitable for wind speed as per IS : 875 (Part-III) it shall also include accessories for high must including head frame, SS wire rope 6 mm dia ,trailing cable , raising/ lowering system comprising double drum winch , luminaires carriage suitable for 9 Nos LED luminaires in symmetrical arrangement incl wiring with 1.5 Sqmm PVC insulated PVC sheathed flexible copper conductor , lugs, MCB and lightning finial.The mast light shall have an integral power tool installed inside the base compartment for its operation. incl foundation bolts manufactured from special steel along with nuts washers anchor plates and templates and LED type Aviation obstruction light.The control pannel housing 32A TPN MCB incommer, single dial time switch , 25A TP contactor for the automatic control of luminaires ,out going terminals and control circuit for the power tool motor Construction of suitable shallow foundation with (1:2:4) type B-1 concrete as per manufacturers designe and instruction for the high mast light considering the safe soil bearing capacity at site as 10 T/sqmtr at 2 metre depth complete with all materials and labour.(High mast and flood light fitting shall be of same make and installed under supervision and direction of specialised crew of the manufacturer.)

S&F 250 Watt powder coated (PDC) aluminium LED modular linear flood Light fitting , SMD LED with secondary lens complete all as specified and as directed (Make :- conforming to Cat Part-BARFEG240WLED of Bajaj or equivalent of other specified makes.)

M&L for Fabrication, supply, installation, commissioning and testing of outdoor type feeder pillar box floor mounted , weather and vermin proof made out from 3.15 mm thick MS sheet ( CPRI type tested) with canopy type roof, over all size 0.75m x 0.60m x 0.30 m, front operated, two part hinged doors with locking arrangement, including built in aluminium busbar of size 40mm x 5 mm (4cm x 45 cm long) on base insulator with heat strinkable PVC sleeving having RYB-B colour code drilling holes for connection of incoming and outgoing cable, powder coated painting , testing and installation on PCC/brick foundation, connection of cable with suitable aluminium lugs all as specified and directed.( Note :-MCCB will be measured and paid separately.)

S & F MCCB 125 Amps, 4 pole, 415 volts, 50 Hz 25 KA breaking capacity with adjustable thermal magnetic release with spreader link on both sides complete all as specified and directed.

M&L for Earthing complete with galvanized steel earth plate 600mm x 600mm x 6mm thick, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to GI earth strip/ earthing lead of size 25mm x 4mm flat by means of bolts, nuts, check nuts & washers of galvanized iron or steel besides building at all joints wiith and including excavation and earth work, GI pipe medium grade 40 mm bore for protection of GI earth strip from earth electrode, 20 mm bore GI Pipe light grade for watering, supplying and fixing test point terminal block made of gun metal or phosporos gross size 75 mm x 75mm x 25mm drilled and screwed including three nos 8mm dia 25mm long hexagonal head screwed , supply and laying charcoal dust, common salt, PCC (1:2:4) type B-1 using 20mm graded stone aggregate for chamber and MS angle iron frame 40mm x 40mm x 3mm and RCC cover 40 mm thick (1:2:4) type B-1 using 20 mm graded stone aggregate Reinforced with 8 mm dia TMT bars @ 75 mm C/C both ways with MS handle 12 mm dia , PGI funnel and wire mesh , complete all as shown in electrical plate No 3 of SSR Part-I (2009) and connected to earth test point including testing complete all as specified and directed. Note:- 1. Rates quoted by the contractors include for earth lead and its protection pipe upto and including 7.5m from the earth plate. 2. Additional earth lead /protection pipe if any beyound 7.5 m shall be measured and paid for separately under appropriate item of sch 'A'.

.......ditto......but M&L for earthing complete with galvanised steel pipe electrode 40 mm bore, medium grade 2.50 mtr length , buried in ground vertically to a depth n. Less than 3.75 mtr below normal ground level and connected with GI earthing wire 4 mm dia by means of bolts,nuts and washers made of galavanised iron and steel earth wire protected by 15 mm bore light grade GI pipe incl PCC work as per Electrical Plate No - 2 of SSR Part-1 (2009) pit cover slab of size (300mmx300mmx50mm) with handle as shown in drawing funnel , wire mesh 20 mm dia GI pipe medium grade for watering , charcoal and salt in alternate layers incl necessary complete all as specified and directed.....ditto....

Add / deduct for M & L for GI strip 25 x 4 mm with base insulators and screws etc fixed on wall/ floor for extension of earthing lead complete all as specified and directed.

Add / deduct for M & L for GI earth lead 4 mm dia with base insulators and screws etc fixed on wall/ floor for extension of earthing lead complete all as specified and directed.

Excavation in trenches n. exc 1.5 m wide and n.exc 1.5 m in depth and getting out soft /loose soil complete all as specified and as directed for laying of under ground cable, foundation of pole and stay etc. complete all as specified and as directed

Returning filling including spreading leveling watering and well ramming in layers not exc 25Cm in soft/ loose soil, complete all as specified and directed.

Removing excavated material in soft/ loose soil n'exc 50M and depositing where directed at a level n'exc1.5M above the starting point, complete all as specified and directed.

Supply and laying sand with approved fine grade sand around cable in cushioning for protection of under ground cable complete all as specified and as directed. Note:- (only punned and consolidated volume to be measured).

Supply and laying kiln burnt bricks best quality locally available old size sub class 'B' bricks laid flat in trenches with axis of brick perpendicular to the axis of cable for cable protection complete all as specified and as directed.

M&L for Drilling / Boring holes horizontally under road without damaging the surface of road ( minimum 1.0 Metre below the road surface mannually or pneumatically to accommodate/ or laying GI tubing not exc 80 mm bore (dia) for passing under ground cable, complete all as specified and as directed. NOTE : - GI Pipe laid will be measured and paid separately under respective item of BOQ.

S&F of 80 mm bore GI tubing light grade with all fittings laid across road, in trenches or across PCC drain, along electric pole or floor/wall for cable protection OR fixed on poles/ walls with suitable size of MS clamps and nut and botls / washers complete all as specified and directed.

Supply,laying, jointing and testing cable XLPE Insulated screened PVC bedded, galvanized steel wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 50 Sqmm 3.5 core complete all as specified and directed.

Supply,laying, jointing and testing cable XLPE Insulated screened PVC bedded, galvanized steel wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 35 Sqmm 3.5 core complete all as specified and directed.

Supply,laying, jointing and testing cable XLPE Insulated screened PVC bedded, galvanized steel wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 16 Sqmm 4 core complete all as specified and directed.

M/S Sonu Traders

Balaji Associates