Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹2.7 LAccepted-AOC NEAR ST XAVIER S SCHOOL BABINA CANTT DISTT JHANSI UP 284401 | JHANSI | UTTAR PRADESH | 284401 | 1 | Accepted-AOC LOWEST BIDDER | |
| 2 | 2₹2.8 L+₹13,121 (4.95%)Rejected-Finance TAPARIYAN BEHIND MAHARISHI SCHOOL BABINA BABINA RURAL JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | 2 | Rejected-Finance NOT LOWEST BIDDER | |
| 3 | 3₹3.3 L+₹69,497 (26.2%)Rejected-Finance CIVIL LINE MATATILA ROAD TALBEHAT DISTT LALITPUR U P | TALBEHAT | LALITPUR | U P | 3 | Rejected-Finance NOT LOWEST BIDDER | |
| 4 | 4₹3.4 L+₹71,728.50 (27.0%)Rejected-Finance | 4 | Rejected-Finance NOT LOWEST BIDDER | |
| 5 | 5₹4.2 L+₹1.5 L (57.2%)Rejected-Finance VILLAGE TAPARIYAN BABINA CANTT BABINA JHANSI UP 284401 | BABINA | JHANSI | UP | 284401 | 5 | Rejected-Finance NOT LOWEST BIDDER |
Tender Value
₹2.8 L
EMD Value
₹5,642
Closing Date
16 Jul 2024, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
BRIJ BIHARI
LAKEVIEW CAMP MIL STN TALBEHAT 284125
PROVN OF ONE X BATHROOM AT FINGER GUARD (BUDHA CHOWK) AT TALBEHAT MIL STN
2024_MES_660383_1
AGE (I) TBT/TOK-14/2024-25
Open Tender
Civil Works
Item Rate
180 days
TALBEHAT MIL STN
7 documents required · 7 mandatory
₹500
Yes
AGE I TALBEHAT
₹5,642
21 Sept 2024
18 Jun 2024
18 Jul 2024
25 Jun 2024
16 Jul 2024
2 Jul 2024
Amount
M&L for Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out soft/loose soil.
M&L for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in foundations, fillings, mass concreting complete all as specified and directed.
M&L for RCC nominal mix 1:2:4 type B-1 20mm graded stone aggregate for Beams, cantilevers, bressummers, lintels over 1.5m span Including necessary form work complete all as specified and directed.
S&F rolled mild steel section work as in main and cross beam, hip and jack rafters purlins where connected to common rafters and running rails and guides for sliding door fixed with angle cleats or other connecting plates and cooler stand,staging and similar work confirming to Fe 410W(Gde E-250 quality A) complete all as specified. (Note : In any height of building inclding necessary scaffolding)
S&F Pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.5 mm thick, Trapezoidal roofing profile with 190 mm Pitch & 29 mm depth of profile of any colour having tensile strength of 550 Mpa fixed with self tapping screws as specified & directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm.complete all as specified and directed.
Removing excavated material exc. 250 m but n exc. 500 m and depositing where directed.
M&L Brickwork with fly ash bricks, straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 using old size bricks, complete and all as specified and directed
M&L PCC (1:4:8) type D-2 (using 20mm graded stone aggregate) 75mm thick as in sub base of floors all as specified and directed.
M&L PCC (1:2:4) type B-0 (using 12.5mm graded stone aggregate) 25mm thick as in floors all as specified and directed.
M&L PCC (1:3:6) type C-2 using 20mm graded stone aggregate 75mm thick as in plinth protection finished cement concrete surface even & smooth with out using extra cement laid in alternate bays n.exc 2m in length all as specified and directed.
M&L for Hardcore Broken stone or boulders of gauge n exc. 63 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surface complete all as specified and directed.
M&L for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and directed.
S&F Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for Chain link fencing confirming to Fe 410-w (Gde E-250) complete all as specified and directed.
S&F Steel ventilator with top hung shutter including hinges,hold fasts, steel peg stay, complete
M&L for 3mm thick Sheet glass, ordinary quality and glazing with oil putty in square n exc 0.5 sq. m in each pane
S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet, reinforced with MS square tube, fixing in same opening complete all as specified and as directed
S&F factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for top, bottom and side rails, MS frame shall be covered with heat molded plain colour PVC’C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stile and plain colour PVC sheet for top rail lock rail &bottom rail on either side and as gap insert for top rail and bottom rail paneling of plain colour PVC sheet to be fixed in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beading and jointed together with solvent cement supplying and fixing in the frame at site complete all as specified and directed.
S&F butt hinges 100mm extruded aluminium alloy with galvanised mild steel hinges pin anodised and fixed complete all as specified and directed.
S&F of 200mm aluminium alloy tower bolts, stove enamelled black with bright bolt complete all as specified and directed
S&F of 250mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed complete all as specified and directed.
S&F 125mm size aluminium alloy handles, fabricated type extruded section, ISI marked all as specified
M&L rendering 10mm thick in cement plaster 1:6 on internal surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed
M&L rendering 15mm thick in cement plaster 1:4 on external surfaces of brick work/ concrete and surface finished even and smooth without using extra cement complete all as specified and as directed
M&L for preparation of new plastered surfaces of walls and applying two coats of Cement base paint all as over a coat of primer complete all as specified and directed
Material and labour for preparation of newly plastered surfaces and applying three coats of white wash on walls complete all as specified and directed.
M &L for coloured non skid ceramic tiles 7 to 8 mm thick (square /rectangular) area of each tile exceeding 0.11 sqm but n.exc 0.18 sqm, in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match laid over 15mm thick screed in CM (1:6) complete all as spd and as directed..
M&l galzed colour ceramic tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:4 complete all as specified and directed.
M & L for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over one coat of red oxide zinc crome primer all as specified
S&F 110 mm dia PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches or in floors complete all as specified and directed.
S&F 110 mm dia PVC (SWR) bend/Tee complete all as specified and directed.
S&F 110mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement
S&F PVC(SWR) Vent cowl 110mm dia complete all as specified and directed.
Grating doom 125mm dia of PTMT (Minimum weight 25gms)
S&F rotational moulded polethylene water tank of 500Ltrs capacity (Cylindrical vertical with closed top) noticed and portion complete all as specified and as directed.
S & F water tubing 15 mm bore, medium weight, ISI marked galvanized with all fittings and fixed to walls, ceiling or laid in floors complete all as specified and directed.
All as per srl item above but 20 mm bore
S&F in fancy type brass CP wall mixer for hot & cold for mixing hot & cold water with provn of over head shower with area and long pipe and flanged screwed down for iron pipe 15mm bore fixed all as specified and directed.
S&F 15mm dia Stop valves, chromium plated screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.
S&F Brass chromium plated Tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and directed.
S&F Brass chromium plated shower rose 125mm size with or without swivel joints, any size, including fixing to steel pipe or union complete all as specified and directed.
S&F Soap dish, vitreous China white, approximate size 160x 160x90mm soap tray embedded in the wall complete all as specified and directed.
S&F 15mm dia Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed complete all as specified and directed.
M/L for point wiring concealed type with 1.5sq mm FRLS PVC insulated unsheathed single core multithreaded copper conductor cable 1100 volts grade incl 1.5 Sq mm PVC insulated unsheathed copper conductor cable as earth continuity conductor drown through in and incl FRLS PVC rigid conduit not less than 20 mm dia with its accessories pressed steel terminal box incl 3mm thick ISI marked laminated sheet cover for fixing switches/socket/regulators etc for the following: Note:- On RCC ceiling/column, false ceiling, AC/Metallic Sheet ceiling wiring done on surface with conduit/PVC Casing caping and its accessories.
One light/fan point controlled by one No piano type switch 5 Amps single pole one way
One socket outlet 5/3 pin 6 AMPS controlled by one switch on independent board.
All as per item No 44 above but 3 pin socket out let 15/16 Amps on the independent Board all as spfd with single core unsheathed PVC insulated cable multistranded copper conductor of size 2.5 sq mm for phase & neutral & 2.5 sq mm for earth continuity conductor.
S&F Switch Piano Flush button single pole one way 5/6 Amp.
S&F Switch Piano Flush button single pole one way 15/16 Amp.
S&F socket outlet 2 in 1, 3 pin & 2 pin, 5/6 Amp, 240 volt.
S&F socket outlet 2 in 1 , 3 pin & 2 pin, 5/6 Amp and 15/16 Amp, 240 volt.
S&F ceiling rose surface bakelite 65mmx50mm 100watt three terminal.
S&F sheet metal enclosure double door for MCB DB single pole and neutral 4way 240 volts double door (Metallic) type.
S&F MCB SP 5 to 32 Amps 240 volts 'C' series, 10 KA, 50 Hz including connection in the DB and testing/commissioning. Make:- As approved Make of DB
S&F MCB SPN 40 Amps 240 volts 'C' series, 10 KA, 50 Hz. Make:- As approved Make of DB
Supply and fixing LED tube light fitting 1x 18W, 4 feet, 220V,AC decorative box type with driver, holder including LED light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete.
Supply and lay steel water tubing GI Medium grade ISI Marked 20 mm dia bore with all necessary fittings and fixtures laid in trenches or fixed to wall etc complete including cutting and fixing with existing pipe all as specified and directed by Engr-in-Charge.
Supply and lay steel water tubing GI Medium grade ISI Marked 25 mm dia bore with all necessary fittings and fixtures laid in trenches or fixed on wall etc complete including cutting and fixing with existing pipe all as specified and directed by Engr-in-Charge.
S&F Gun metal gate valve 20 mm dia ISI Marked with iron wheel head screwed both ends for iron pipes all as specified and directed by Engr-in-Charge.
S&F Gun metal gate valve 25 mm dia ISI Marked with iron wheel head screwed both ends for iron pipes all as specified and directed by Engr-in-Charge.
Material and labour for boring of borewell below ground level upto 60 mtr depth and 100mm dia including drilling ramming and development of bore with air compressed air and after 25% extra capacity pump by pumping muddy water minimum 6 hours and including other necessary connected items i.e. PVC Pipe 40 meter, suitable MS Clamp etc complete all as specified and directed by Engineer-in-Charge.
Supply and Installation self priming Monoblock Pump single phase 1HP, discharge range 3300-1300 LPH, head range 30 mtr, suction and delivery size 25mm, copper winding with all necessary base/ fittings including 3 core suitable copper cable connection upto Motor starter complete all as specified and directed by Engineer-in-Charge.
Supply and replacement of DOL starter of capacity 1 HP Single phase suitable for 01 HP Monoblock pump complete including 10 Meter suitable 3 core copper electric cable all as directed by Engr in charge.
Supply and laying or fixing or passing through pipe in replacement, 1100 volts grade heavy duty cable with PVC insulated aluminium stranded conductor served with an inner sheathing of PVC tape and overall PVC sheathed in service connection suspended by insulating hangers not more than 1.00 meter apart including 4mm dia suspension wire one twin core cable flat or circular of size 10 sqmm 2 core complete all as specified and directed by Engineer in charge.
S&F house service bracket hook type complete with 3.00 Mtr Long GI Pipe 40mm dia medium grade, 02 Numbers 90 degree bends MS hook and stay or guy.
Material and Labour for earthing complete with galvanized steel earth plate electrode 600 x 600 x 6 mm thick buried directly in ground( earth pit not less than 2.25 meter deep below ground level) with top edge of plate not less than 1.5 meter below normal ground level, connected to galvanised earth lead wire 4.0mm dia by means of bolts, nuts, check nuts and washers of galvanized iron or steel, all as shown in electrical plate No 3 of SSR Pt I including necessary excavation and earth work PCC (1:3:6) type C-1 with 50 mm thick pre cast RCC ( 1:2:4) type B-1 cover slab framed with 50X30X4 mm MS angle (reinforced with 6 mm dia deformed bar @ 15 cm C/C both ways and suitable handle of 10 mm dia round bar) including providing charcoal or coke and magnesium sulphate in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel and 20 mm bore galvanized iron watering pipe (medium grade) wire mesh, copper lugs, complete in all respect., GI earth wire protected by 40 mm bore (light grade) galvanized iron pipe and other end connected to the earth bar (test point) made of MS flat (400X32X6 mm) bend in ‘D’ shape and fixed to wall by means of fast nut or bolt grouted in to wall at 1 mtr from plinth height. 4sqmm PVC insulated (colour green) copper conductor single run as earth continuity conductor along with 15 mm PVC conduit grouted in wall or fixed on wall surface to be continued up to main switch board and fix with common earth dolly as directed by EIC . Disposal of soil to a distance not exceeding 50 mtr and necessary testing on completion complete all as specified and as directed.
Note :- Debris obtained from all items should be removed in low lying areas as directed by Engr-in-charge out of MOD Land. (Rates quoted for items are deemed to be included for this, where removal of debris in the items is not considered.)
RAHUL ASSOCIATES (BID ID -3063882)
HARNAM SINGH ANIL SINGH (BID ID -3055178)
M/S SACHENDRA KUMAR JAIN (BID ID -3055275)
M/S Kharya Associates (BID ID -3054494)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .