Construction School toilet building and Kitchen shed an New PD Shop at alangulam panchayat union in Tenkasi District AGAMT II Package No.03

Amount

1.Construction of Toilet at Nehru Nagar in Kuthapanchan panchayat

Earth work excavation in all clauses of soils with initial lead and lift except hard rock requiring blasting etc., complete for foundation as per SS 20B

Cement concrete 1:4:8 mix using 40mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete

Refilling the basement with excavated earth other than sand complying the Standard specification etc., complete.

Random Rubble Measonry in CM 1:5 mix using required bond stone with simulataneous pointing including all cost and conveyance and all labour charges etc., complete.

Brick work in CM 1:5 mix using third class country bricks of size 8 3/4 x 4 1/4 x 2 3/4 including all cost and conveyance of materials and labour charges etc., complete

Centering charges for RCC works including all cost and conveyance all materials to site etc., complete.

Supplying and fabrication of steel including all cost and conveyance and all labour charges for cutting, bending, tieing and placeing in position etc., complete.

RCC 1:1.5:3 mix using 20mm ISS HBG metal including all cost and conveyance and all labour charges etc., complete excluding cost of steel without centering.

Granolithic flooring finishing with CC 1:2:4 mix using 10mm - 12mm ISS chips HBG metal including cost and conveyance of all materials to site and all labour charges etc., complete

Plastering with CM 1:3 mix using to 10mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Plastering with CM 1:5 mix using to 12mm thick including all cost and conveyance of all materials and all labour charges etc., complete

Distembering two coats with best approved distember including cost and conveyance of all materials to site and all labour charges etc., complete.

Exterior Emulsion painting two coats with best approved quality and colour emulsion paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting with approved colour including cost and conveyance and labour charges etc., complete.

Supply of WC

2.Construction of Public Distribution System Building at Alwanthukkarpatti Village in kuthapanchan Panchayat

Earth work excavation for foundation in all soils and sub soil to full depth as may be directed except in hard rock requiring blasting but inclusive of shoring strutting and requiring the sides of foundation.

Filling in Basement with excavated Earth in layers of not more than 15cm. Thick well rammed, watered and consolidated complying with standard specifications etc., complete.

Cement concrete 1 : 4: 8 mix using 40 mm HBG metal for foundation including watering wherever necessary and laid in layers of not more than 15cm thick compacting etc., complete complying with standard specifications and as directed.

Cement concrete 1:2:4 mix using 20mm ISS metal including cost and conveyance of all materials to site and all labour charges for mixing, laying and curing etc complete for bed blocks for 10 cum

Supplying and filling foundation and basement with stone dust layers not more than 15 cm thick, well rammed, watered and compacted complete complying with standard specification.

Supplying and Erecting centering for sides and soffits including necessary supports and strutting upto 3.29m height for plane surface in all floors with all cross bracing using mild steel sheets of size 90x60cm and 10 gauge stiffened, welded with steel angle of size 25x25x3 mm for boarding laid over silver oak joists (Country wood) of size 10x6.5cm spaced @ about 90cm c/c and supported by casurina props of 10-13cm dia spaced @ 75cm c/c etc., complete complying with standard specifications and as directed by the departmental officers. Rate for 10Sqm for the following items (RCC floor slab, roof slab, Rectangular/Square, tee/All beams, lintels, staircase waist slabs, landing slabs, landing beam, portico beam etc.

a) plane surface such as RCC floor slab ,roof slab, roof beam,lintel

b.For Columns,sunshade ,sill slab

providing and laying in position of standardised concrete Mix M-20 Grade in accordance with IS :456-2000 using 20mm and down graded hard broken granite stone jelly for RCC items of works with minimum cement content of 400kg/m3 and max. water content ratio of 0.45 including admixture in recommended proportions as per IS :9103 tp accelerate as directed by the departmental officers .the coarse sand and fine aggregates to be used should comply with the requirement of IS standards

For foundation and basement

b.For SS in ground floor

Brick work in CM 1 : 5 mix using country bricks ground mould of size 23 x 11 x 7 cm for the following including curing etc., complete complying with standard specifications.( CM 1:5)

a.For Foundation and basement

b.For SS in Ground floor

Brick partition walls of 11.50cum thickness using best quality II nd class ground mouldes chamber burnt of size 9" x 4-3/8" x 2-3/4" in CM 1:3 etc ,,,complete

Supplying and fabricating and placing in position MS steel or ribbed for steel for all reinforced cement concrete works as per the design given including cost of steel and binding wire in all floors etc., complete complying with standard specification.

Supply and Fixing of Cuddapah slab for Shelf including cost and conveyace of allmaterials to site complete

Plastering with cement mortar 1:3 mix to 10 mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Plastering with cement mortar 1:5 mix to 12mm thick including cost and conveyance of all materials to site and all labour charges etc complete for 10 Sqm.

Special Ceiling plastering and finishing the exposed surface of all RCC items of work such as slab,beams,sunshades facia,canopy slab, staircase,waist slab,landing slab ete… with CM 1:3 10mm thick including hacking the surfaces providing CM noising, beading for Sunshades,steps,landing slab and curing..ete

Paving the Floor with scratch proof ceromic tiles of size 305x305x6mm including cost and conveyance of all materials to site and all labour charges etc complete

Dadooing of walls with Colour glazed tiles of size 15 cm x15cmx6mm laid in CM 1:2, 10mm thick & pointing with white cement using 0.4kg/cm2 -10Sqm.

Supplying and fixing in position of indian water closet (oriya type) of size 580 x 440 mm white glazed earthern ware of approved quality and brand with 'P" or S trap conforming to BIS with sand cushion and forming flooring alrd the closet using 40mm broken jelly in lime concrete 1 :2:5 100 mm thick and finishing the top to the required slop and including giving necessary connection to CI soil pipes by dismantling brick, masonry wall reinforced cement concrete roof floor slab and making good the dismantled portion to the original condition with weakage.. ete

Supplying and fixing in position best quality and approved make Indian made white /colour glazed earthernware wash hand basin size of 550 x400 mm

Supplying and fixing in position 15mm dia brass CP screw downtap / pillar tap pf approved make conforming to BIS specifications and including cost and conveyance of all materials

Fabrication supplying and fixing of steel door of madeout of 40 x 40 x 6mm M.S angal section for outer frame and shutter made out of 35*35*5mm M.S angal section with necessary stiffner 32*6mm flat of size not exceeding at 30cm entervel and necessary cross diagonal m.s flat size 32*6mm a outer frame tha shutter frame ... etc complete

solid pvc door shuttering usiing 19 gauge MS square tubes for styles and outer frames.15mm MS square tubes for top lock and bottom rails.The steel tubes shall be covered with 5mm thick solid sheets. Shutter using 5mm thick solid pvc sheets for panellig shall rigitity fixrd in position including necessary furniture and fittings

Manufacturing Supplying and fixing in position of steel windows with the following specifications.outer frame of windows made of Z section F7D of size 33 x25 x 3mm at 1.416kg/m and mullian J section (F4B) of size 46 x 25 x 3mm at 2.28 kg/m and shutter section of made of F7D of size 33 x25 x 3mm at 1.416kg/m as specifird in IS 7452/1990.

Supplying fabricating and placing in position of steel glazed ventilator with two panel with in all floors with aluminium section of the following sizes with necessary such as rubber beading and fixing 4 mm thick plain glass including cost of all materials ,labours,power consumption drilling holes in RCC columns slab,masonry walls necessary with power drills to the extent and make good to the original condition after fixing and as directed

Supplying and erecting puli and push type rolling shutter with ISI make of approved size and section using 18 GI sheet.The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers transportation charges.. Etc

White washing one coat with freshly burnt white shell lime in all floors including cost of lime,blue powder fevicol type gum ,brushes ,scaffolding, charges. Etc

White washing two coat with freshly burnt white shell lime in all floors including cost of lime,blue powder fevicol type gum ,brushes ,scaffolding, charges. Etc

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coats over new iron works such as steel door, windows, ventilators, window bars, balustrades etc., with best approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers.

Finishing the top of roof with one course of PRESSED TILES of size 23 cm X 23 cm X 2 cm laid in cement mortar 1:3 (One cement and three Sand) 12mm thick mixed with water proofing compound conforming to I.S. at 2% by weight.

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil) SD-18

Supply and fixing of 1200 mm (48inch) sweep AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.SD-110

Supply and fixing of 1200 mm (48inch) sweep AC ceiling fan complete with stepped electronic 300W regulator with 300mm down rod on the existing clamp.SD-110

Supply and fixing of fancy glass shade and 11W CFL for BH point. SD-80

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for 11W CFL lamp with CFL(SD 83)

Supply and fixing of single box type 4' 40 W flu fitting complete PVC unsheathed Copper leads fron terminals to the fitting. SD 88

Supply and fixing of TNEB Meter Board suitable for 32A Single Phase service connection with 32A Fuse unit (500V), 32A Neutral link and earth link (1inch x 1/8inch Copper flat) on TW plank of size 375mm x 300mm x 19mm with supporting TW reepers of 1inch thick on either side with painting with suitable bolt and nuts for fixing the TW plank on wall with earth connection and interconnection with 7/20 PVC insulated copper wire from EB meter to fuse unit.-SD-125

Supply and fixing of 16 Amps DP Switch of 500 V with Metal clad with fuse and neutral (Side Handle) on suitable TW Board with earth connection only. (SD 142)

Supply and run of 2 of 1.5 Sq.mm (22/0.3) PVC insulated SC unsheathed copper conductor of 1100V grade on 7/20 GI bearer wire for service connection mains-SD-64

Supply and fixing of 20mm dia GI Pipe including all cost and conveyance all labour charges etc complete.

3.Construction of New Kitchen shed at Kollankulam Panchayat union Primary school at Odaimarichan Panchayat

Earth work excavation and depositing on bank with initial lead of 10m and lift of 2m in hard gravelly soil etc. complete as per SS20B for foundation

Filling the basement with excavated earth other than sand including all labour charges etc. complete.

Cement concrete 1:4:8mix using 40mm HBG metal including cost and conveyance of all materials to site including all labour charges etc. complete.

RR Masonry in CM 1:5 mix using rough stone and bond stone including cost and conveyance of all materials to site and all labour charges etc.complete

Brick work in CM 1:5mix using country bricks including cost and conveyance of all materials to site and all labour charges etc.complete

Providing steel centering and shuttering for sides and soffits with MS Sheet and Country wood including cost and conveyance of all materials to site etc. complete.

Supplying and fabrication of steel including cost and conveyance of all materials to site and all labour charges etc. complete

RCC 1:1.5:3 mix using 20mm HBG metal including cost and conveyance of all materials to site including all labour charges etc. complete.

Plastering with CM 1:5mix to 12mm thick including cost and conveyance of all materials to site including all labour charges etc. complete.

Finishing the floor with granalothic in CC 1:2:4mix using 10mm to 12mm size hard broken stone jelly and the top rubbed smooth etc comlpete

RCC 1:2:4 mix using 20mm HBG metal including cost and conveyance of all materials to site including all labour charges etc. complete.

Weathering course with broken jelly for 20mm size 20X20X2 mm using cm1:3 including cost and conveyance of all materials to site including all labour charges etc. complete.

Terrace flooring with one coarce of old &new machine pressed tiles of size 23x23x2 cm using Cm 1:3 with water proofing compound 2% weight of cement used and the joints pointed with same mortar etc complete.

Plastering with CM 1:5mix to 12mm thick including cost and conveyance of all materials to site including all labour charges etc. complete.

Distembering two coats oil bound distember over priming coat inculding cost and conveyance of all materials to site and all loboure charges etc complete ( Inner wall )

Exterior Emulsion painting two coats with best approved quality and colour paint over one coat of Base coat including cost and convyance of all materials to work site and labour charges etc., complete.

Painting two coats over new iron works such as steel door, windows, ventilators, window bars, balustrades etc., with best approved colour over the existing priming coat etc., complete complying with standard specifications and as directed by the departmental officers.

suppply and fixing of cuddapah slab for shelf including cost and conveyance etc completed

Providing and fixing of PVC rain water down fall pipe 110mm dia with necessary TW clamps Plug shoes bend screwes nails etc.. Completed

Electrical Arrangement

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5A F.T. switch with painting of suitable colour for open PVC light point / fan point for electronic regulator) (Assume 5 points per coil) SD-18

Wiring with 2 x 1.5 Sq.mm (22/0.3) PVC insulated single core unsheathed copper conductor of 1100 V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150X100X113 mm TW switch box flush with covered with nylon sheet of 3mm thick 5Amp 3pin for open PVC plug point SD-36

Supply and fixing of single box type 4' 40 W flu fitting complete PVC unsheathed Copper leads fron terminals to the fitting. SD 89

Supply and fixing of WT bulk head fitting with guard (Philips / Bajaj / Crompton / K. Lite) suitable for 11W CFL lamp with CFL(SD 83)

Supply and run of 2 of 4 Sq.mm (56/0.3) Polythene insulated PVC unsheathed Sc Alu cable of 1100V on 7/20 GI bearer wire for service connection mains-SD-65

GST Amount for providing Service to Government Contract Works for the above RENEWAL Works. { GST Amount is the Total GST Amount for overall quoted amount above this row in column "BB" for all works in this package} (Refer Clause 13.2 & 13.3 of Section 2 of Instruction to Bidders (ITB) of SBD)

M.Maridurai