Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.6 LAccepted-AOC | ₹39.6 L Quoted ₹33.7 L | L1 | Accepted-AOC Financial bid accepted |
Tender Value
₹52 L
EMD Value
₹4.6 L
Closing Date
26 Mar 2026, 12:00 pmClosed
Office of the S.E, Jhansi Circle, P.W.D., Jhansi
Office of the S.E, Jhansi Circle, P.W.D., Jhansi
Renewal with General at Km 4,7,8 and 9 of Babina Tunka road in Jhansi district
2026_CEJNS_1128559_1
2084/44 C-JHS Circle/2025 Date 19.03.2026
Open Tender
Civil Works - Roads
60 days
Jhansi
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,500
₹4.6 L
Yes
Office of the S.E, Jhansi Circle, P.W.D., Jhansi
23 May 2026
20 Mar 2026
26 Mar 2026
20 Mar 2026
26 Mar 2026
20 Mar 2026
23 Mar 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Construction of sub-grade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of table No. 300-2 | |||||
| 2Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam-III (53-22.4 mm) specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/ vibratory roller in stages to proper grade and camber, applying and brooming requisite type of screening/ binding Materials to fill up the interstices of coarse aggregate, watering and compacting to the required density. | |||||
| 3Providing and applying tack coat with bitumen (VG-10) using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous surface cleaned with mechanical broom. | |||||
| 4Providing, laying and rolling of open - graded premix surfacing of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates using Viscocity grade bitumen to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant of appropriate capacity not less than 200 tonnes/hour, laying and rolling with a smooth wheeled roller, finished to required level and grades. | |||||
| 5Providing and laying of premix sand seal coat (Type-B) with HMP of appropriate capacity not less than 200 tonnes/ hours using crushed stone chipping 6.7 mm size and penetration bitumen of suitable grade. | |||||
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 2.52 MB
BOQ_2104895.xls
BOQ • 0.27 MB
T2.pdf
Tender Documents • 1.22 MB
Download all tender documents and submit your bid