Construction of I.T.I at Jakhal (Talwara) in Distt. Fatehabad. (Pdg. Power Wiring only). RECALL

Amount

Main Switches (HSR 31.12 (a). Supply and erection of metal clad switches / B.D.Bs with rag bolts on wall or on existing angle iron board / pedestal including bonding to earth and necessary connections. v) Double pole switch 32 amp. 415 Volts Cat-B.

xiv) Triple pole switch with neutral link 32 amp. 415 Volts.Cat-B

xv) Triple pole switch with neutral link 63 amp. 415 Volts Cat-B

xvi) Triple pole switch with neutral link 100 amp. 415 Volts Cat-A.

Molded case Circuit breakers. Supply and erection of molded case circuit breakers on wall or on existing pedestal including bonding to earth and necessary connections. (HSR 31.12(c ) i) 15 amp. to 63amp. 415 V ,10 KA 3-phase.

ii) 100 amp.to 220 amp.415 V,10 KA 3-phase.

Supply and erection of M.S. angle iron frame duly welded for housing M.S. sheet & main switches etc. on it, fixed on wall by means of suitable size of rag bolts with cement concrete ,duly painted with three coats of approved paint including one coat of red oxide. (HSR 31.13) ii) Size 40 mm x 40 mm x 6 mm.

M.S.Sheet (HSR 31.14) i) Supply and erection of 3 mm thick mild steel sheet duly welded on existing M.S. angle iron frame for fixing the main switches etc. as required, duly painted with three coats of approved paint including one coat of red oxide.

Miniature Circuit Breaker and Isolator:- Supply and erection of miniature circuit breaker / isolator 240 /415 V in the existing distribution board including making necessary connections. (HSR 31.17) Miniature circuit breakers of 9 KA breaking capacity. SP MCB 6 amp. to 32 amp.

TP MCB 6 amp. to 32 amp.

TP MCB 40 amp. to 63 amp.

Pipe Laying: xxx) Supply and erection of PVC pipe of 6 kg. pressure laid 1 meter below ground level complete including digging refilling of the trench with jointing etc. (HSR 31.21). PVC pipe 65 mm dia.

(Q) Earthing (HSR 31.22). iii) Earthing with GI earth plate 600 mm x 600 mm x 6 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as equired.

iv) Earthing with tinned copper earth plate 600 mm x 600 mm x 3 mm thick including accessories and providing masonry enclosures with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required.

v) Extra for charcoal or coke and salt for GI. Plate or copper plate earth electrode.

xv) Pdg. and fixing 25 mm x 5 mm G.I. Strip on surface or in recess for connections etc. as required with all labour and material.

xi) Pdg. and fixing 25 mm x 5 mm GI. strip in 40 mm dia GI. pipe from earth electrode as required .

x) Pdg. and fixing 25 mm x 5 mm copper strip in 40 mm dia G.I. pipe from earth electrode as required .

Under Ground Cables: Supply and erection of underground cable 1 meter below ground level covered with sand and bricks including necessary connections, digging and refilling of trenches. (HSR 31.25). xxix) 95 Sq. mm 3.5 Core Ard. Cable .

Supply and erection of underground cable ,loose in existing pipe or trenches complete with necessary connections. (HSR 31.26). iii) 6 Sq. mm 2 Core Ard. Cable .

xxviii) 70 Sq. mm 3.5 Core Ard. Cable.

xxix) 95 Sq. mm 3.5 Core Ard. Cable .

xxxix) 10 Sq. mm 4 Core ard. Cable .

xl) 16 Sq. mm 4 Core Ard. Cable.

Supply and erection of suitable compression type brass cable glands for underground Cable. (HSR 31.28) i) Upto 6 sqmm Cable 2 to 4 core.

ii) 10 Sqmm to 16 Sqmm Cable 2 to 4 Core

iv) 70 Sqmm to 95 Sqmm Cable 3 to 3.5 Core .

Supply and erection of MS stand made of 50mmx50mmx6mm angle iron frame and 150cm long, 30cm wide with MS sheet covering size 30cmx30cm 3.15mm thick fixed on the top of board & legs duly embedded in 1:2:4 cement concrete block 30cm below ground level including cost of cement sand welding, painting & fabrication charges etc upto the entire satisfaction of Engineer-in-Charge of the work. (HSR 31.51)

Supply and erection of module case circuit breaker single pole/ 4 pole on wall /on existing pedestal including bounding to earth and making necessary connection required to complete the job in all respect up to the entire satisfaction of the Engineer-in-charge of the work. (HSR 31.69). vii) 4 Pole MCCB 300 amp to 400 amp.

iv) Load Bank 8 way 400 Amp.

Supply & erection of factory manufactureed cable tray cover made of 16g GI Sheet complete with Fastoner Nuts bots and in position including all petty material required to complete the Job in all respect upto the Entire statisfaction of Engineer-in-Charge of the work. (HSR 31.82) i) Size for 40 x 100 mm

ii) Size for 50 x 150 mm

Supply and erection of Double door sheet, steel loadline/ Powerline Vertical distribution boards are titled with bus bars, netrual link, and blanking plate (but without cost of MCCBs) suitable for TP/ FP veritcal MCCBs 25 KA MCCB upto 125 amp as incomer complete with all labour and material required to complete the job in all respect upto the entire satisfaction of the Engineer-in-charge of the work. (Make: Havell's/Standard/ Indoasian). i) 4 Way vertical TPN Distribution board

ii) 8 Way vertical TPN Distribution board

iii) 12 Way vertical TPN Distribution board

Virender Singh prop. Balaji electric company