WBPWD/EE/HD/NIeT_2/2024_25/10

Amount

SUB HEAD - I (FIRE HYDRANT SYSTEM)

Under Ground Piping

Supply, erection, testing & Commissioning of MS black steel pipe medium Grade conforming to IS : 1239Part - 1/3589 including all fittings viz. Elbows, tees, flanges, etc. reduces, clamps, included with joints complete with anticorrosive treatment to burried pipes by wrapping with two coats of 4mm thick PYPKOTE membrane applied over a coat of primer. (Make: TATA/JINDAL)

Above Ground Piping:

Supply, erection, fabrication, testing & commissioning of MS black steel pipe medium grade conforming to IS : 1239 Part -1/3589 including all fittings viz. Elbows,tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface. (Make: TATA/ JINDAL)

Providing and fixing RCC Hume Pipe NP 3 as per IS: 458 (For Road Crossing) / HDPE SN-8

300 mm dia

Supply, installation, testing & Commissioning of SS oblique type single Landing valve with 80 mm inlet and 63 mm outlet GM instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket, nuts and bolts complete. (Make: Fire Shield/Shah/Safeguard)

Supply, installation, testing & Commissioning of SS oblique type single Hydrant valve with 80 mm inlet and 63 mm outlet GM instantaneous male coupling with rubber cap and chain conforming to IS : 5290 including matching flanges, gasket. nuts and bolts complete. (Make: Fire Shield/Shah/Safeguard)

Supply, installation, testing & Commissioning of 63 mm dia rubberized reinforced rubber line hose pipe In 15 m length conforming to IS : 636 Type II lSI marked with gunmetal male and female instantaneous coupling conforming to IS 903 wounded with 18 SWG copper wire complete. (Make: Fire Shield/Shah/Safeguard)

Supply Installation,Testing & Commissioning of ISI marked water branch pipe with nozzel as per IS 903/93 (Make: Fire Shield/Shah/Safeguard)

Supply Installation,Testing & Commissioning of lSI marked 25 NB Air release valve on raiser.

Supply Installation, Testing & Commissioning of MS hose box of fabricated from 16 SWG CRCA sheet double door with lockable arrangements to accommodate 2 RRL hose of 15 m length and one branch pipe painted white inside and red outside with one key. (750x600x250 mm) (Make: Fire Shield/Shah/Safeguard)

Supply & installation of swinging type hose reel drum fabricated from 14 SWG CRCA sheets painted with red colour stove paint 2 coats over 1 coat of primer with 30 m long 20 mm dia rubber hose pipe with 10 kg/sq cm working pressure with 25NB GM Globe Valve and GM self closing shut - off nozzle of 5 mm outlet fixed on wall with dash fasteners. (Make: Fire Shield/Shah/Safeguard)

Supply & fixing of 25 NB Ball VALVE conforming to IS:778 (Make: Leader/Laxhmi)

Supply Installation,Testing & Commissioning of Pressure Gauge (150 mm dia) lS:3624-1979 (Make: H Guru)

Supply Installation, Testing & Commissioning of Gunmetal 3 way collecting head with 63 mm dia instantaneous type inlet 150 dia flanged outlet without built in check valve for fire brigade connection (IS : 904) (Make: Fire Shield/Shah/Safeguard) with one no. butterfly valve & NRV of 150NB size (Make: Kirolasker/Kalpana/FC)

Installation,Testing& Commissioning of ISI marked CI SLUICE VALVE conforming to IS 14846 PN 1.6 with companion flanges,gaskets nuts & bolts (Make: Kirolasker/Kalpana/FC)

Supply Installation, Testing & Commissioning of ISI marked CI Non return Valve IS-5312 with components flanges,gaskets,nut & bolts (Make: FC/ Koley/ Kalpana)

Supply Installation, Testing & Commissioning of CI Butterfly valve wafer type with CS Shaft and Nitrile Rubber Seat with components flanges,nut & bolts. (Make: FC/ Koley/ Kalpana)

SUB HEAD - II (PUMP HOUSE EQUIPMENT)

Supply Installation, Testing & Commissioning of horizontal centrifugal type MOTOR DRIVEN MAIN FIRE PUMP of capacity 2280LPM at 88 MWC, 2900 RPM along with: (Make: Kirloskar brothers/ Mather & Platt/ Crompton/ Lubi)

Supply Installation, Testing & Commissioning of horizontal centrifugal type Engine DRIVEN FIRE PUMP of capacity 2280LPM at 88 MWC, 1800 RPM along with: (Make: Kirloskar brothers/ Mather & Platt/ Crompton/ Lubi)

Supply Installation, Testing & Commissioning of horizontal centrifugal type Motor DRIVEN JOKEY PUMP of capacity 180LPM at 88 MWC, 2900 RPM along with: (Make: Kirloskar brothers/ Mather & Platt/ Crompton/ Lubi)

Supply,Fabricating, fixing, testing and commissioning of air cushion tank (material IS 2062/2002) with SS air-release valve of approved quality with S.S isolation valve, GM drain valve, gate valve, provision for pressure switches, pressure gauge etc.inside the pump house including making inlet and outlet connection with MS pipe of required length from discharge header to air cushion tank, fixing properly and securing the same to the base etc. complete in all respect having painting including two coats of approved paint over a coat of primer. The tank shall be fabricated out of 8mm thick MS sheet shall be of cylindrical shape with 300mm dia and 1.5m height. The tank shall be installed on suitable vertical legs having M.S. plate of size 75mm x 75mm x 5mm at the bottom. The legs shall be grouted in Cement concrete foundation. Flange connection shall be provided for connection with discharge header. The tank shall be tested at 25 kg/sq.cm before installation.

Supply Installation, Testing & Commissioning of CI Butterfly valve wafer type class PN 1.6 as per IS: 13095-1991 or BS: 5155 with CS Shaft and Nitrile Rubber Seat with components flanges,nut & bolts. (Make: FC/ Koley/ Kalpana)

Supply Installation, Testing & Commissioning of ISI marked CI Non return Valve IS-5312 with components flanges,gaskets,nut & bolts (Make: H sarker/ Koley/ Kalpana)

Supply Installation, Testing & Commissioning of CI Foot Valve with components flanges, gaskets, nut & bolts (Make: Kirolasker/ Kalpana/ H sarker)

Supply Installation, Testing & Commissioning of 25NB GM Ball Valve as per IS:778 (Make: Ledder/ Lakshmi/ Reputed)

Supply Installation, Testing & Commissioning of 25NB GM Non Return Valve as per IS:778 (Make: Ledder/ Lakshmi/ Reputed)

Supply Installation, Testing & Commissioning of Pressure switch for pumping system. 2 NO & 2 NC ;IS:3624-1979 (Make: Indfos)

Supply Installation, Testing & Commissioning of Pressure Gauge (150mm dia) IS:3624-1979 (Make: H Guru)

Supply, erection, testing & commissioning of compartmentalised common control panel for Electrical Motor driven pumps as per technical specification attached with this tender document. All components shall be housed in a common cubicals made of 16 swg. M.S. sheet with required stiffners(if required). The panel shall be powder quoted of approved colour both inside and out side. The pane shall have both bottom and top cable entry provisions and panel shall be mounted on pedestal of 300mm height.

Supply Installation, Testing & Commissioning of Power Cable Al.1.1KV Gr PVC alongwith Gland,lugs,etc IS:1554

3cC x 96 sqmm

3C x 16 sq.mm

Supply Installation, Testing & Commissioning of Control Cable Al.1.1KV Gr PVC alongwith Gland,lugs,etc IS:1554

2C x 1.5 sq.mm

10C x 2.5 sq.mm

Supply, erection, fabrication, testing & commissioning of MS black steel pipe medium grade conforming to IS : 1239 Part -1/3589 including all fittings viz. Elbows,tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface. (Make: TATA/ JINDAL)

Supply, installation, testing & commissioning of ISI marked 1000Lit. Capacity PVC priming tank with all accessories

Supply Installation, Testing & Commissioning of Gunmetal 4 way collecting head with 63 mm dia instantaneous type inlet 150 dia flanged outlet without built in check valve for fire brigade connection (IS : 904) (Make: Fire Shield/Shah/Safeguard) with one no. butterfly valve & NRV of 150NB size (Make: Kirolasker/Kalpana/FC)

Supply Installation, Testing & Commissioning of Gun-metal Fire brigade suction hose coupling (Draw-out Connection) with nut for female coupling as per IS:902-1974 complete with 150 mm dia. MS suction pipe and 150 mm dia. 1 No. CI foot valve flanged (Make: Kirolasker/Kalpana/FC) (to be connected to static water tank).

SUB HEAD - III SPRINKELER SYSTEM

Supply, erection, fabrication, testing & commissioning of MS black steel pipe medium grade conforming to IS : 1239 Part -1/3589 including all fittings viz. Elbows,tees, flanges, etc. reduces clamps, MS support dash fasteners etc. including painting the pipe with two coats of approved red oxide primer and two coats of approved red enamel paint and welded joints complete with cutting and making good the complete with cutting and making good the walls, floors or any other surface. (Make: TATA/ JINDAL)

Installation, Testing & Commissioning of ISI marked CI SLUICE VALVE conforming to IS 14846 PN 1.6 with companion flanges, gaskets nuts & bolts (Make: FC/ Koley/ Kalpana)

Supply Installation, Testing & Commissioning of CI Butterfly valve wafer type with CS Shaft and Nitrile Rubber Seat with components flanges,nut & bolts. (Make: FC/ Koley/ Kalpana)

SITC of UL listed constant pressure type 150NB UL listed flange mounted installation control valve with water motor Gong and call accessories. (Make: HD / Viking)

Supply Installation, Testing & Commissioning of ISI marked 25 NB Air release valve on raiser (Make: Ledder/ Kalpana/ H sarker)

Supply & fixing of 25 NB Ball VALVE conforming to IS:778 (Make: Leader/Lakshmi)

Supply Installation, Testing & Commissioning of Pressure Gauge (150mm dia) IS:3624-1979 (Make: H Guru)

Supply Installation, Testing & Commissioning of electrically operated water flow switches (Vane type) including tamper switch and accessories, complete with tap off socket arrangement as required, with 2 Nos. NO/ NC potential free contact.

Supply, erection, jointing, testing and commissioning of Quartz Bulbe Sprinkeler head operating Temperature 68deg. C with all accessories. (Make: HD / Viking)

SUB HEAD - IV PORTABLE FIRE EXTINGUISHER

Supply Installation,Testing & commissioningof ISI marked & ISO certified dry Chemical powder type fire extinguisher 4 Kg capacity with GM wheel type capconforming to IS 15683 (Make: Fire Shield/Shah/Safeguard)

Supply Instaliation,Testing & Commissioning of lSI marked & ISO certified CO2 type fire extinguisher 4.5 kg capacity conformingto IS 15683 (Make: Fire Shield/Shah/Safeguard)

Supply, Installation, Testing & CommIssioning of lSI marked water (CO2 gas Expelled) type extinguishers 9 litres capacity with discharge tube, metal cap, 60 grams carbon dioxide cartridge complete in all respects. (Make: Fire Shield/Shah/Safeguard)

SUB HEAD - V SAFETY SIGNAGE

Supply and Fixing in position the "FIRE EXIT" Sign with luminicent colour having size 300 x 100 mm

Supply and Fixing in position the "FLOOR NO" Sign with luminicent colour having size 200 x 100 mm

Supply and fixing in position the signages " FIRE ORDER" contain the following matter on 3 mm thick "Opaque" PVC foam board of computerised cut, PVC non-reflective self adhesive vinyle painted foam board of size 1200 x 1000 mm.

M/S CHOPDER ENTERPRISE

NILEX FIRE PROTECTION SYSTEMS