TN-05/EE/2025-26 Rajwaha Main Sarwat Ke Km 0.600 to Km 1.700 ke madhya nahar sewamarg ke navinikaran ka karya Lot No-26

Scrapping of Upper Surface including disposal of all scraped material to a distance of 30 meters (100 ft) as directed by Engineer-in-charge. For small area for big area as per Mord.

Earth work in Cutting or in embankment in ordinary soil excavation to be in the from of irregular pits and earth work in embankments to be in 20 cm .Layers ,including ramming and dressing the surface to the required levels, slopes and also including lift upto1.50m and 30m lead. the earth cutting to be used in making embankment or to be disposed of as spoil banks within 30m distance as per direction of Engineer in-charge.

Brick lining on both side of the road of M-150 bricks 7cm wide 11cm deep, laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing and ramming the excavated earth as directed by the Engineer-Incharge (S.I. 765)

Providing, laying, spreading and compacting stone aggregates of specific size to water bound macadam Grade-3 specification including spreading in uniform thickness, hand packing, rolling with 3 wheeled steel/vibratory roller 8-10 tonnes in stages to proper grade and camber, applying and brooming requisite type of screening/binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density, as per Latest Mortd & H specification.(By Machine Means)

Providing & applying Primer coat with bitumen emulsion (ss)on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.75/kg sqm using mechanical means as per technical Specification Clause 502.(By Machine Means)

Providing & applying tack coat with V.G. 10 using bitumen distributor at the rate of 0.30Kg per sqm on the prepared granular surface treated with primer cleaned with hydrolic broom as per Technical Specification Clause 503.(By Machine Means)

20mm thick Open-Graded Premix Carpet using Bituminous (penteration grade/modified bitumen) Binder-Providing, laying and rolling of open-graded premix surfacing of 20mm thickness composed of 13.2 mm to 5.6mm aggregates either using viscosity grade bitumen VG-10 to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a hot mix plant, laying by Paver Machine and rolling with a smooth wheeld roller 8-10 tonne capacity, finished to required level and graded to be followed by seal coat as per Lates MORD specification.

Providing and Laying seal coat by mannual means with V.G.-10 Grade Bitumen sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using type C as per Lates MORD specification.(By Machine Means)

Painting White /Coloured traffic lines 8-15 cm wide in three Coats with Approved road making paint (spirit base)as directed by the Engiineer in charge , including supply of all materials, labour tools & plants etc required for proper compietion of the work.